temperature control unit used for sale

Holtrop Jansma filtering plant with build-in Fan Manufacturer: Holtrop Jansma Type: MSK300 Capaciteit: 6.000 m3/hr Year: 1999 Dust extract. Fan: ETD 300, 5.5 KW/1.500 tpm Explosion pressure: controlled pressure off-load in case of an explosion via doors Pressure Gauge: Bottom part of the filter mounted Filterbag cleaning: 0,09 KW/1500 KW vibrating motor Scope of supply: Filtering plant, with build in exhauster and switch cabinet

Holtrop Jansma MSO 250 filtering plant Manufacturer: Holtrop Jansma Type: MSO-250 Year: 2016 M-Nr.: W0056730S Vacuum filtering plant: MSO 250 with automatic fire-protection system; powder fire-extinguisher, fire closing valve, electric switch-off Diameter dust extraction pipe: ø250 mm Length: 2.250 mm Width: 1.230 mm Height: 2.840 mm Weight: 600 kg Capacity: 4.060 cbm /hour Pressure: 1.900 Pa Power: 4.0 kW, 380V, 9 Amp Filtering surface: 27 sqm Filter sleeves: 30 pcs Length filtering sleeves: 1.450 mm Diam. filtering sleeves: 200 mm Cleaning: inclusive Noise: dB(A) Fire fighting system: Automatic fire protection system, comprising of powder fire extinguisher, electric switch-off machine, closing fire valve in air recovery (new powder fire-extinguisherwill be installed before delivery) Scope of supply: Filtering installation, dust extraction ventilator, machine control, automatic fire fi ...

Holtrop Jansma filtering MSK350S Manufacturer: Holtrop Jansma Type: MSK350S Machine Nr.: 8002672B Year: 1998 Type installation: . Diameter aanzuig: ø350 mm Capacity: 8.000 m3/uur Dimensions: 3.4471.2803.865 mm .: 46 m2

Riedex MD280 clean-air filterinstallation Manufacturer: Riedex Type: MD280 Year: 2011 Serie Nr: 2079 Length: 2.300 mm Width: 1700 – 1000 mm Height: 3.300 mm Diameter: Ø 300mm Capacity: 6.000 m³/h Pressure (Pa): 1.750 Pa Power: 6.0 kW, 400 V Nim. Power input: 16 A Filtering surface: 46,0 m² Filtering aid: H2, Filament 500 gramm, BIA-Norm, (dust < 0,1 mg/m³) Containers: 500 Ltr – 4 Containers Average noise level: 68 dB (A) Cleaning: Automatic filter cleaning (programm-controlled)

Holtrop Jansma filtering plant with build-in Fan Mabnufacturer: Holtrop Jansma Type: MSK300 Capacity: 6.000 m3/hr Year: 2001 Dust extract. Fan: ETD 300, 5.5 KW/1.500 rpm Explosion pressure: controlled pressure off-load in case of an explosion via doors Pressure Gauge: Bottom part of the filter mounted Filterbag cleaning: 0,09 KW/1500 KW vibrating motor Air recovery canal: 500500 mm Dimensions: 3.3503.0001.200 mm Scope of supply: Filtering plant, with build in fan, switch cabinet, air recovery

Holtrop Jansma filtering plant with build-in Fan Manufacturer: Holtrop Jansma Type: MSK300 Capacity: 6.000 m3/hr Year: 1999 Dust extract. Fan: ETD 300, 5.5 KW/1.500 tpm Explosion pressure: controlled pressure off-load in case of an explosion via doors Pressure Gauge: Bottom part of the filter mounted Filterbag cleaning: 0,09 KW/1500 KW vibrating motor Air recovery canal: 500500 mm Dimensions: 3.3503.0001.200 mm Scope of supply: Filtering plant, Filtering plant, with build in fan, switch cabinet, air recovery

Holtrop Jansma filtering plant with build-in Fan Mabnufacturer: Holtrop Jansma Type: MSK300 Capacity: 6.000 m3/hr Year: 2001 Dust extract. Fan: ETD 300, 5.5 KW/1.500 rpm Explosion pressure: controlled pressure off-load in case of an explosion via doors Pressure Gauge: Bottom part of the filter mounted Filterbag cleaning: 0,09 KW/1500 KW vibrating motor Air recovery canal: 500500 mm Dimensions: 3.3503.0001.200 mm Scope of supply: Filtering plant, with build in fan, switch cabinet, air recovery

Riedex MD280 clean-air filterinstallation with starwheel closure and transport fan Manufacturer: Riedex Type: MD280 Year: 2011 Serie Nr: 2083 Length: 2.300 mm Width: 1700 – 1000 mm Height: 3.300 mm Diameter: Ø 300mm Capacity: 6.000 m³/h Pressure (Pa): 1.750 Pa Power: 6.0 kW, 400 V Nim. Power input: 16 A Filtering surface: 46,0 m² Filtering aid: H2, Filament 500 gramm, BIA-Norm, (dust < 0,1 mg/m³) Containers: 20 FT or sim. Container Average noise level: 68 dB (A) Cleaning: Automatic filter cleaning (programm-controlled) Woodchip disposal: Starwheel and transport fan

ALKO ECO-JET 35/3N onderdruk afzuiging, met perslucht reiniging Manufacturer: ALKO Type: ECO-JET 35/3N Year: 2004 M-Nr.: 33184130 Vacuum filtering plant: Diameter dust extraction pipe: ø250 mm Length: 2.925 mm Width: 1.230 mm Height: 3.440 mm Weight: 816 kg Capacity: 3.000 m3 /uur Pressure: 3,050 Pa Power: 4.kW, 380V, 9 Amp Filter surface: ca.23 m2 Cleaning: Inclusive Average noise level: 77 dB(A) Fire safety precaution: Sprinklers – pipe with connected to automatic fire fighting system Scope of supply: Filtering installation, machine control,

Verhagen Industrie high vacuum hoover Type: Comzu F3313 B3 VLSFF313003-B3 Year: 2006-2015 Electrics: 380V / 220V Power: 3 1.1 KW Construction: Stainless steel container, solid subframe for construction site with wheels Capacity: 628 m3/hr Vacuum: 220 mBar Filter cleaning: Manual Container: 45 Liter Diameter: ø90 mm Filtering surface: 0,85 m2, Teflon IP44 Noise: < 70 dBa Wheels: 2 Rubber coated Dimensions: (L W H): Weight: 68 kg Optional: Auto start-stop switchbox

Holtrop Jansma-AFS vacuum filtering plant 21.000m3/h with 2 cascade installed exhausters, waste disposal starwheel closure, screw conveyor, transport exhauster, air-recovery system, air-pressure cleaning, etc. Manufacturer: Holtrop Jansma – AFS Type: OSFS 185 Year: 2005 – 2015 M-Nr.: Vacuum filtering plant: Diameter dust extraction pipe: ø700 mm + ø700 mm Length: 3.500 mm Width: 2.300 mm Nett working height: 6.200 mm Capaciteit: 21.000 cbm /hour Power: 2 15 kW, 380V, 56 Amp, 10.500 m3/uur, 3.000 tpm, 3.850 Pa, Typ: RL E 550130 Filter surface: 185 sqm Filter sleeves: 150 pcs Length filtering sleeves: 2.200 mm Diameter filtering sleeves: 180 mm Cleaning: Compressed air cleaning Fire safety precaution: Sprinklers – pipe with connection fire fighting Screw conveyor: HJ STH-380 12 tpm Starwheel closure: HJ ZRS-300, 31 tpm Dimensions closure: 250350 mm Transport ventilator: Diameter D ...

Imprinting Unit Numbering- & Perforation Unit Heidelberg PM / SM 52 N&P Eindruckwerk mit Nummerier- & Perforiereinrichtung / Imprinting Unit Numbering- & Perforation Unit Heidelberg PM / SM 52 N&P Year 2000 - SN. 361748 Eindruckwerk / Imprinting Unit Nummerierwelle mit 4 Sitzringen / Numbering shaft with 4 mounting rings 2 Perforierarme / 2 Perforating arm 2 Nummerierwerke / 2 Numbering boxes 1 Schaltkurve links und rechts / 1 cam left and right

Frontschnittmaschine in einem sehr guten Zustand / Front Cutting Unit in very good condition Frontschnittmaschine / Front Cutting Unit Theisen & Bonitz S 201 Baujahr / Year 2021 - Serial-No. 7237 in einem sehr guten Zustand // in very good condition

Numbering units Leibinger Gradsteller / Quersteller / Forwards / Backwards xx099-1 Numbering Units Leibinger Gradsteller rückwärts / straight Backwards xx099-2 Numbering Units Leibinger Gradsteller vorwärts / straight Forwards xx099-3 Numbering Units Leibinger Quersteller rückwärts / convex Backwards xx099-4 Numbering Units Leibinger Quersteller vorwärts / convex Forwards

Semi-rotary die-cutting unit Brand: PROFILINE Model: Profi-Line R-320 Year : 2016 Speed: 90 m/min WINK cylinder is brand new and unused

# HP Jet Fusion 5200 – Produktionsbereites MJF-System mit vollständiger Peripherie Zum Verkauf steht eine HP Jet Fusion 5200 aus dem Jahr 2019, eine industrielle 3D-Druckanlage auf Basis der MJF -Technologie für die wirtschaftliche Serienfertigung von Kunststoffbauteilen. Die Anlage wurde im August 2020 in Betrieb genommen und verfügt über ca. 5.100 Betriebsstunden. Ein aktiver Wartungsvertrag läuft bis 20.01.2026. Lieferumfang HP Jet Fusion 5200 Druckeinheit Post Processing Station für Pulverentfernung und -aufbereitung 2 Build Units (parallele Produktion, reduzierte Stillstandzeiten) 2 Pulverfässer Transportstapler für Build Units und Materialhandling Technische Spezifikation Bauraum: 380 × 284 × 380 mm Schichtdicke: ca. 80 µm Materialien: PA12, PA12 GB, PA11 (je nach Konfiguration) Pulvermanagement: Automatisiert über Post Processing Station Betriebsart: Industrieller Da ...

Ausladung: ca. 1200 mm

Power: 3 kW, Volume: 80 l

For all further technical data please refer to the photographed nameplate.

Ausladung: 1200 mm

• Incl. two rotary tables • Diameter rotary table 1: 320 mm • Diameter rotary table 2: 250 mm • Diameter 3-jaw chuck: 130 mm

Maschinennummer: 3226, Betriebsspannung: 220 V, Anschluss: 1 kW, Nennstrom: 4,5 A, Frequenz: 50 Hz, Drehzahl: 4000 U/min

incl. workbench as well as a vise, jaw width: 80 mm

Ausladung: 1200 mm

EDI system mounted on steel frame for the fully automatic production of ultrapure water. Normally, the system is operated following a UO system. The plant consists essentially of: 1.The EDI system consists of 3 parallel stacks of the type MK2E (total of 6 stacks and 2 centrifugal pumps). Both roads are mounted on a common frame. one below, the other above in the frame. 2. Piping and EDI cells 3. Fittings, flow meters and centrifugal pumps

System separator type BA300 System separator - Ductile iron with backflow preventer on input and output side, 3 ball valves, drain valve Flanges according to DIN EN 1092-2 for safeguarding drinking water systems against backpressures, backflow and back suction, for residential buildings, industrial and commercial purposes, horizontal installation position with drain valve downwards, discharge volume in case of failure: 35 m3 / h, 3 ball valves for connecting a differential pressure gauge

Hydraulic pump unit Part Number : Moog - D954Z8001 Arburg - A10VDC 18 DFR1/31R The spare part is in good condition Nevertheless, this is a used items, which shows slight signs of wear, or may have.

Model No.: 143783 Maximum load: 300 kg Equipment / Additional information: Loading direction: left

Model No.: 143784 // S. No.: H - 6026 Maximum load: 300 kg Equipment / Additional information: Loading direction: right

Model No.: 143784 // S. No.: H - 6025 Maximum load: 300 kg Equipment / Additional information: Loading direction: right

Model No.: 143784 // S. No.: H - 6024 Maximum load: 300 kg Equipment / Additional information: Loading direction: right

Model No.: 144148 // S. No.: H - 6042 Maximum load: 300 kg Equipment / Additional information: Loading direction: front

Model No.: 144148 // S. No.: H - 6043 Maximum load: 300 kg Equipment / Additional information: Loading direction: front

Model No.: 144148 // S. No.: H - 6041 Maximum load: 300 kg Equipment / Additional information: Loading direction: front

Model No.: 144148 // S. No.: H - 6040 Maximum load: 300 kg Equipment / Additional information: Loading direction: front

Overview This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data Manufacturer: KHS AG (Dortmund, Germany) Model: Innopro warmer-cooler Year of manufacture: 2006 (control cabinet 2007) Machine type: thermoregulator for heating or cooling wine, skid-mounted Product: wine Throughput: 9,900 l/h (99 hl/h) Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at  ...

Fully automatic capsule weighing unit Manufacturer Bosch/Mettler Toledo Type IPK Year of construction unknown The IPK is a weighing unit for statistical weighing of capsules. The IPK can only be placed in front of a capsule filling machine of the GKF 400/700/701/1400/2000/2500 series from Bosch. Consisting of: precision scale, automatic feeder and printer.

Fully automatic capsule weighing unit Manufacturer Bosch/Mettler Toledo Type IPK Serial number 0042-08-2006 Year of construction 2006 The IPK is a weighing unit for statistical weighing of capsules. The IPK can only be placed in front of a capsule filling machine of the GKF 400/700/701/1400/2000/2500 series from Bosch. Consisting of: precision scale, automatic feeder and printer.

on stainless steel column; incl. digital readout; \"Toshiba\" label printer and \"Alup\" refrigerant dryer Auction-ID: A1-50542-19

Extraction system Spänex -as good as new - SPÄNEX extraction, filter and transport system with clean air side Arranged extraction fan with max. 27000 m³/h air output Year of manufacture 2023 CE As good as new – only approx. 20 hours of operation Filter type: FA V/2000-VE-630-37-B-V-F-6-2,2 Filter area 180 m² Filter air flow max. 27000 m³/h Residual dust content less than 0.1 mg/m³ Mode of operation discontinuous Chip buffer volume 6 m³ Motors: 1 x vibration – 0.16 kW, 1 x discharge 2.2 kW, 400 V / 50 Hz Dimensions: L 2.9 x W 2.9 x H 7.3 m Built-in fan type: SU-630-A003-37-M Volume flow max. 30,000 m³/h Total pressure difference max. 4500 Pa Operating point 27000 m³/h Total pressure difference 3800 Pa Fan efficiency 86 % Power requirement 33.5 kW Exhaust fan soundproofed Motor power 37 kW 400 V/50 Hz, IE 3 Weight approx. 5800 kg (with filled chip contai ...

Used combined woodworking machine: surface planer and thicknesser with integrated boring unit, working width 400 mm. It combines surface planing (jointing) and thicknessing of timber with drilling in a single machine, reducing the space and number of machines needed in the workshop. Brand, exact model, weight, motor power and year of build are not confirmed for this specific unit - please contact us for details. Serviced and ready to work without any problems Auction-ID: A7-50988-31

Industrial Electric Motor-Driven Pump Assembly Used industrial pump assembly comprising a three-phase electric motor, coupling or bearing housing and cast pump body. The configuration is suitable for centrifugal or transfer pumping of water and other low-viscosity liquids. Machine type: Electric motor-driven industrial pump Drive: Three-phase electric motor Pump configuration: Cast pump body with coupling or bearing housing Features: Protective motor fan cover, electrical terminal box and pump pipe connection Approximate dimensions: 950 x 400 x 450 mm Approximate weight: 90 kg The pump assembly is offered in used condition, untested and with operation unknown. Visible wear includes heavy dirt, chipped paint, surface corrosion, oxidized fasteners and contamination from prolonged storage. The motor, pump housing, coupling, bearings and electrical connections require in ...

USED NOVAXESS SPRINKLER UNIT TYPE HP70B PRO WITH OIL COOLING Serial No.: 6694 Year: 2018 Equipped with 1 HP 70 bar pump with flow rate 30 liters/minute 1 930 liter oil tank 1 Hydraulic lifting kit 1 Duo of cartridge filters mounted 90μ + 10μ series 1 Hyfra cooling unit type Gama 13 Dimensions and weight 2500x1100xH1600 mm - weight 450kg Auction-ID: A1-50950-60

USED MONNET FILTER UNIT Serial No.: 15CF 002MEU Year: 2015 Equipped with 1 Paper Filter Sprinkler Pumps 1 Magnetic Conveyor Dimensions and Weight 2100x1500xH1800mm- Weight 400 kg Auction-ID: A1-50950-53

Nummerierwerke Gradsteller / Quersteller vorwärts und rückwärts - Numbering Units straight / convex Forwards and Backwards Leibinger Nummerierwerke / Numbering Units for Heidelberg GTO / SM52 Rotationsnummerierwerke - Rotary numbering Units Verfügbar in folgenden Variationen / Available in the following variations: FH-147 Nummerierwerke Gradsteller vorwärts / Numbering Units straight Forwards     Leibinger 301-420S+ FH-148 Nummerierwerke Gradsteller rückwärts / Numbering Units straight Backwards Leibinger 301-420S- FH-149 Nummerierwerke Quersteller vorwärts / Numbering Units convex Forwards     Leibinger 304-420C FH-150 Nummerierwerke Quersteller rückwärts / Numbering Units convex Backwards Leibinger 303-420C

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Hansa Flex, hydraulic unit type HKK0770105A045 -Motor: 5.5 kW -Pressure: up to 170 bar -Flow rate: 6 l/min -Hydraulic reservoir: 45/30l / with level indicator -Individual components: see photos -Dimensions: 945/470/H810 mm -Weight: 120 kg

High-pressure compressed air handling unit , mounted on a chassis and equipped with a temperature and pressure control device. Manufacturer: BEKO TECHNOLOGIES GmbH Type: AC 020-030 +35°C HP 060 Year of Manufacture: 01/2020 Serial Number: HP030.060.0120679 Test pressure: 143 bar(g) Maximum permissible pressure: 100 bar(g) Working pressure of compressed air: 60 bar(g) Operating temperature: +20 to +35 °C Maximum volumetric flow rate at the inlet: 30 m³/h according to ISO 1217 Power supply: 230 V / 1 Ph. / PE / 50 Hz Approximate weight: 210 kg Notified Body: TÜV NORD Systems Visible equipment: STÖRK temperature controller, pressure gauges, stainless steel piping and two pressure vessels Marking: CE 0045 Visible pressure vessels: Type: HD-B147.100 Serial numbers: 1470120470 and 1470120471 Unit volume: 7.7 liters Test pres ...

2x Used scanion 304200 NO-STATIC 200 ionizing units Auction-ID: A1-50936-268

Used XL Electropure Electrodeionization Unit Auction-ID: A1-50936-249

Used Haake Water Cooler – Circulation Cooler – Cooling Unit Cooling temperature: 15 – 30 Degrees Pressure: 14.5 – 86 Psig 14.5 – 6.0 Bar Voltage: 380 Volt, 50/60 Hz. Auction-ID: A1-50936-256