134,942 used machines on RESALE, but how to find them? Machine Search
Spindles, machining unit, automatic drilling machine, drilling machine, pillar drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Max. feed rate: Stroke 60 mm -Drive: 1.1 kW -Recording: 10 x 17 mm -Number: 2x quill processing units available Price: per piece -Weight: 25 kg/piece
Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.15 kW 11160 rpm at 200 Hz -Saw: max. Ø 150 mm -Motor: mounted on guides -Travel distance: 320/100 mm -Dimensions: 550/250/H330 mm -Weight: 17 kg
Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: approx. 150 bar -Liter flow rate: approx. 30 l/min -Drive: 3 kW 1400 rpm -Dimensions: 520/360/H340 mm -Weight: 65 kg
We sell a used system of recycling machines with the following components (built in 2004): - Chip crusher type RS 300 E with coarse part outlet (Steimel) - Scraper belt conveyor with torque cut-off (DGS) - Chip centrifuge AZ - 250 (ARP) - Vacuum valve VSS 100 (ARP) - Pump sump (ARP) - Vibrating sieve -Switchboard The facility is fully functional and can be picked up.
impressions: 28 Mio. max. printing speed sheets: 10000 /h max. paper size: 34 x 46 cm serial no.: 956.596 total weight with 2 piles: 1030 kg paper thickness max.: 0,3 mm numbering unit: minus Version Dimensions (L/W/H): 160x110x160 mm dampening system: Direktfilmfeuchtwerk Stack height: Anleger 490 mm Stack height: Ausleger 460 mm power required: 3,0 KW frequency: 60 Hz voltage: 220-240 V 3 inking forme roller per printing unit Blanket washer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
impressions: 42 Mio. max. printing speed sheets: 10000 /h max. paper size: 34 x 46 cm serial no.: 961.450 total weight with 2 piles: 1030 kg paper thickness max.: 0,3 mm numbering unit: minus Version Dimensions (L/W/H): 160x127x160 cm dampening system: Direkt Dampening System plate clamping system: Autoplate powder device: ink unit wash-up device blanket washer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
impressions: 42 Mio. max. printing speed sheets: 10000 /h max. paper size: 34 x 46 cm serial no.: 958.026 total weight with 2 piles: 1030 kg paper thickness max.: 0,3 mm numbering unit: minus Version Dimensions (L/W/H): 160x127x160 cm dampening system: Direkt Dampening System plate clamping system: Autoplate powder device: ink unit wash-up device blanket washer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
impressions: - Mio. max. printing speed sheets: 10000 /h max. paper size: 38 x 52 cm serial no.: 8212074 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
impressions: 35 Mio. max. printing speed sheets: 10000 /h max. paper size: 34 x 46 cm serial no.: 957.449 total weight with 2 piles: 1030 kg paper thickness max.: 0,3 mm numbering unit: minus Version Dimensions (L/W/H): 160x110x160 mm dampening system: Direktfilmfeuchtwerk The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
impressions: - Mio. max. printing speed sheets: 13000 /h max. paper size: 36 x 52 cm serial no.: 1809 dampening system: konventionell The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Linear unit with planetary gearbox, stroke 1028mm, RK Monoline Z 60, RK Rose+Krieger, used Top Used - top condition like a demonstration unit The part was removed from a pilot system that was only used for a short time and is in almost new condition. Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. The current price of a similar product is € 1980 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Technical data: - Linear unit RK Monline Z 60, with toothed belt drive, RK Rose+Krieger, - Incl. 2 tables 187 x 140mm, table 1 is driven, table 2 is freely movable - the 2nd table can be removed - Max. stroke when using one table = 1028mm - Variable positioning of the drive - Connection linear unit - Gearbox with backlash-free Rotex ...
Hydraulic unit, 330 bar, 10 circuits, 2 servo motorised pumps, 130L, Niehues, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The system was only in operation for a few years and is in top condition. Technical data - Operating pressure 330 bar, 5.1 L/min per pump, 130 L, valve voltage 24VDC, Here are the most important, system-relevant parts of the system, the current new value of these parts is approx. € 32,000. - 2 pcs servomotors 1FK7084-2AC71-1HA0, Siemens - 2 pcs radial piston pumps R 3.6 Hawe + Rotex coupling - 1 pc Aluminium tank NG 13 - 2 pcs pressure relief valves RDM2PT35SVG, Parker - 2 pcs 4/2 way valve D1VW002ENJW, Parker - 10 pcs Check valve CPOM2DDV, Parker - 10 pcs 4/3 way valve D1VW004CNJW, Parker - 8 pcs pressure reducing valve PRDM2PP35SVG, Parker - 20 pcs pressure switches EDS 3446-3-040 ...
We sell 4 pieces of used welding units, welding rectifiers, brand Lincoln DC400, year: 1993, functional, in need of easy repair, only for export For purchase of 4 pieces Price per piece 500,00 E net Single price 600,00 E net
SMU Unit without batteriepack, 3HAC14757-1/01, ABB, used-function assurance Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - had been in storage for quite some time, - is in very good condition and fully functional, Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case ...
Unit without battery pack, 3HAC8365-1/01, ABB, used-function assurance Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - had been in storage for quite some time, - is in very good condition and fully functional, Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of di ...
impressions: 41 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm dampening system: Alcohol numbering unit: optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A total of 8 pieces available, price per table Pros: - Due to the narrow design of the base, good accessibility of the elements from all sides - Large adjustment range of the contact surface by extending the diamond-shaped pads - Tools and small parts always ready to hand on the shelf on the assembly tables - Support rails optionally covered with rubber, brushes, sliding strips or felt - No cable clutter when using the implement carriers: the machines are always ready to hand at the place of use Equipment: - Work surface covered with profile rubber - Diamond shaped supports in the edge area for placing profiles in the longitudinal direction - Height adjustable 900 – 1,100 mm
impressions: - Mio. max. printing speed sheets: 6000 /h max. paper size: 46 x 64 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TGW curves roller conveyors 45° left Order no. 150072 Item 03.0721 year of manufacture: 2012- working width: 345 mm plastic rollers working width: 400 mm metal rollers total width: 480 mm inner radius: 1050 mm speed: 0.45 m / sec lateral guide on both sides Rollers: conical plastic molded rollers: Metal Optional: 3 supports Shipping dimensions: Lxwxh 2200 x 800 x 400 mm: 90 kg Features: Running direction: LEFT Construction year: 2012 condition: very good (used) Nominal / outside width in mm: 480 Roll width in mm: 345 angle: 45° Driven: YES Engine type: SEW Eurodrive Conveyor speed m / s: 0,45 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf v ...
hydraulic unit, hydraulic pump, hydraulic pump -max. pressure: 200 bar -Liter output: 6 l/min per pump -Drive: 0.55 kW 1360 rpm -hydraulic tank -Number: 4x units available -Price: per piece -Weight: 95 kg
Key data: 700 bar, 3 kW
Hytorc High Pressure Hydraulic Pump 700bar, 400V, 3kW with Test Certificate High Pressure Hydraulic Pump Manufacturer: Hytorc Seis GmbH Type JetPro 18.3-4T with integrated, electrically ventilated hydraulic oil cooler. Printed test certificate from 2018, then no longer in use! The hydraulic power unit was used to transport turbine shafts weighing several tons to a hydraulic oil cushion to rotate smoothly and easily. For example, turbine shafts were tested for concentricity and damage. The article is available multiple times.
Key data: 250 mm, 5 kW, 4700 m³/h
Spänex dust extractor SMU 4500.11 Suction nozzle 250 mm Cleaning vibrating motor Nominal flow rate 4700 m³/h Minimum flow rate 3530 m³/h Motor 5.5 kW Filter renewed
Technical data Maximum pressure: 50 tons Year of Make: 1994 Pressing force: 7.14 kg/cm² Number of bindings: 3 horizontal Channel cross-section: 1000 x 700 mm Dimensions of the tailgate: 145 x 95 cm Bale weight: do 500 kg Weight: approx. 10 tons Power connection: 400 V/ 45 kW Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the bale chamber for easy maintenance
Ser. No.: 023910293 // Speed: 20 plates /h Counter: 69'068 plates Format (cm): 50x70 Equipment / Additional information: With Server, Trueflow Software with integrated plate punch with 40 laser diodes (individually replaceable) Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg.
Hydraulic power unit, hydraulic pump, hydraulic pump -Hydraulic unit comes from a 15 t lifting platform -Max. pressure: 130 bar -Tank capacity: 100 liters -Motor: 7.5 kW 1450 rpm -Equipment: Emergency hand pump, hand valve, electric valve, emergency drain, -Dimensions: 1130/445/1320 mm -Weight: 334 kg
Compound plant Bitzer with 6 pcs. compressor Bitzer S6F-30.2Y, in a container as a machine room, with control box fixed wired and condenser with 6 fans on the container.
Blast Freezer Refrigeration Unit Bitzer 16 HP Two-stage with evaporator LH135-S6j-16.2Y, 63,5 cbm/h Vaporizer Crocco Italy
Rotary unit, rotary device, turning table, turning unit -Roller conveyor length: 850 mm -Rollers: Ø 80-120 mm -Roller spacing: 190 mm -Roller width: 220 mm
Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir and valves -Hydraulic pump: Pressure up to 150 bar -Flow rate: 4 l/min -Motor: -Individual components: see photos -Dimensions: 380/220/H450 mm -Weight: 28.7 kg
Koma blast freezer refrigeration unit with Bitzer compressor S6F-30.2Y, as solo compressor or S66F-60.2Y, tandem compressor Refrigeration unit with compressor, subcooler, oil separator, liquid separator, collector, filter, pressostats, control box. All on one rack, easy to transport.
Inv. Num. : 6803 Type: SUPRAREX SXE P-1 400 Producer: ESAB Created: 2007 Parameters: Table height: 700 mm Cutting speed: 24000 mm/min Sheet thickness: 300 mm Cutting length: 2x6000 mm Cutting width: 3000 mm Machine height: 2190 mm Machine length: 2025 mm Machine width: 4654 mm Machine weight: 2000 kg
Stationary high-pressure pump unit Hammelmann HDP 77 on base frame. Similar but no Kamat, Uraca, Woma. Pump Type: HDP 77 Operating pressure: 330 bar Flow rate: 59 l/min. Drive speed: 1500 rpm. Drive power: 37 kW with Siemens 1LA6223-4AA60 electric motor 45 kW with pressure regulating valve, Fzhoqck with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,450x750x1,150 mm Weight: approx. 600 kg Year of construction: 2019 Condition: In good used condition.
Weber Assembly Table Joining Station Solid industrial assembly table / joining station from the quality manufacturer WEBER Konstruktion Maschinenbau GmbH. The machine features an extremely solid basic mechanical design and is ideal for production plants, workshops or as the perfect base for a modernization project Technical data (according to nameplate): Manufacturer: WEBER Konstruktion Maschinenbau GmbH (Aschaffenburg) Type: Assembly Table Machine No.: BA 659 00 Year of manufacture: 08 / 2000 Electrical connected load: 380 V (CEE plug available) Connected load pneumatics: 6 bar "Everything from a single source: We will be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de More items - new and used - can be found in our shop! International shipping costs on request!
Key data: 250 mm, 4 kW, 4060 m³/h
arke: Holtrop Jansma Clean Air Extraction Type: MSO 250 Year of construction: 2016 M-No.: W0056730S Clean air extraction: MSO 250 with flame protection device Intake support: ø250 mm Length: 2,250 mm Width: 1,230 mm Height: 2,840 mm Weight: 600 kg Capacity: 4,060 m3 /hour Pressure: 1,900 Pa Power supply: 4.0 kW, 380V, 9 Amp Filter surface: 27 m2 Filter bags: 30 pcs. Length of filter tubes: 1,450 mm Filter tube diameter: 200 mm Cleaning: included Noise: dB(A) Flame protection system: automatic fire extinguisher with powder extinguishing agent, automatic slider in the return air duct, automatic electrical shutdown of the extraction (New powder fire extinguisher witrd assembled before delivery) Scope of delivery: filter system, with built-in intake fan, control cabinet, automatic fire extinguishing installation with flame protection damper
Hydraulic power unit MTS 507.05 with control cabinet Pmax: 210bar Qmax: 40L Rated Current: 50A Year unknown, AEG Motor Water Return Cooler
Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punch die, punching die -Punch tool: Angle notching tool, notching unit -Dimensions: see photos -Dimensions: 150/130/H80 mm -Weight: 4.4 kg
Horizontal rotary table / dividing head Hahn & Kolb with three-jaw chuck Ø 250 mm. Areas of application & details: Horizontal rotary table from Hahn & Kolb for precise rotary and partial machining, suitable for milling machines, machine tools and fixture construction. Stable industrial design made of grey cast iron, precise indexing via worm gear, equipped with a large 3-jaw lathe chuck Ø 250 mm for solid round parts, shafts, pipes and flanges. Ideal for bolt circles, grooves, gears, shaft machining, CNC preparation, training toolmakers. Compatible with almost all milling machines with T-slot table, e.g. Deckel FP1/FP2/FP3, Maho MH400/600/700, Hermle UWF series, Schaublin 13/22, TOS FNK/FNGJ, Kunzmann WF series, Avia FND/FNC. As well as comparable tool milling machines, radial drilling machines and column drilling machines. Reliable clamping technology for round parts, professi ...
Universal dividing head HOMMEL 349 + Forkardt 408429 + tailstock + accessories 1) HOMMEL WERKE Universal Dividing Head 349 (Partial head / rotary table / rotary table, swivel horizontally & vertically) 2) Forkardt 3-jaw lathe chuck (Model/No. 408429, diameter Ø 160 mm) 3) 5 complete sets of interchangeable jaws for lathe chuck 4) Tailstock HOMMEL 349 5) Centering Bracket / Tip Bracket 6) Slot table / base plate Areas of application & details: Universal dividing head Hommel 349 for precise rotary and partial machining, ideally suited for conventional milling machines, tool milling machines (e.g. Deckel FP1, FP2, FP3, Maho, Aciera, Huron) and demanding fixture construction. Includes original Forkardt 3-jaw chuck 408429 (size 160mm) and five sets of interchangeable jaws for maximum clamping flexibility. The original Hommel 349 tailstock and the height-matching centering block w ...
An automatic TRUMPF sheet loading and unloading unit for laser cutting machines is available. Max. sheet dimensions X/Y: 3000mm/1500mm, min. unloaded part dimensions X/Y: 150mm/150mm, max. sheet weight: 1100kg, max. loading stack height: 300mm. Documentation available. An on-site inspection is possible.
Industrial coolers and cooling interface from Riedel Fully functional. Trouble-free operation with us until the end of May 2026 Cooler and interface are disconnected and ready for immediate shipment. We used them to cool a Trumpf Co2 laser. Operating instructions available (see pictures) Last inspection by specialist company 2026 Refrigerant R134a. Universal Cooling Interface Riedel The cooling interface is a ready-to-connect functional unit and is used to recool water in conjunction with Trumpf cooling units. It contains all the fittings and control equipment required for operation. Further information can be seen in the pictures. If you have any questions, just get in touch. Price = net A VAT invoice will be issued upon purchase. Pick-up by buyers. We can load.
HDPE Film Washer Year of construction 2016 0 operating hours (never went into operation) Manufacturer: NEUE HERBOLD, D-74889 Sinsheim composed of: Wet granulator type SM 450/600-S5-2 Friction washer / friction separator type FW 560/3000 Transport screw Separation tank (float-sink separation) type TB 500 mechanical dryer type TM 1005 Extraction system type MFT 55/500 Fine Material Separator Type HS 500 E-circuit
Technical data: Maximum pressure: 35 tons Year of Make: 1994 Press force: 5 kg/cm² Number of bindings: 4 horizontal Channel cross-section: 1000 x 700 mm Dimensions of the tailgate: 1000 x 650 mm Bale weight: 450 kg Weight: approx. 8 tons Power connection: 400 V/ 22 kW Bale tying: automatic Press capacity max 120 m³ / hour Theoretical throughput to density 30 kg/m3: approx. 3.6 tons/hour Theoretical throughput to density 60 kg/m3: approx. 7.2 tons/hour Theoretical throughput to density 100 kg/m3: approx. 12 tons/hour Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers 2 sets of light cab ...
Winder : Bandera Model W 400/1 Contact winder / surfacewinder Roll diameter max: 1200mm Roller width: 1200mm Roll width max: 1100mm Speed: max. 55m/min Longitudinal cutting device 2 or multi-lane Side Slitting Device Automatic roll change Cross-cutting device Role magazine Calibration device Low-friction rollers motor adjustment Adjustment range: for 500-1100mm laying width takeoff unit: Type TPE-1200 Side gusset insertion device Drive: 4-pole 4kW with axial fan Electric cabinet
maximum number of results exceeded
please refine your search
100 € 
