temperature control unit used for sale

CNC control, control panel, machining center -Control: from press brake Promecam STPC 250 40 121 -Control panel: with support arm -Dimensions: 1925/360/H1280 mm -Weight: 120kg

CNC control, control panel, machining center -Manufacturer: DMT, control panel/CNC control with limit switch from CD320 cycle lathe -Limit switch: Balluf BNS 519 -Dimensions: 500/500/H210 mm -Weight: 11.4 kg

Proportional pressure control directional control valves, solenoid valves, pneumatic valves, air valves, pressure valves, valve blocks, control blocks -Operating pressure: 8 bar 120 psi -Dimensions: 200/85/H75 mm -Weight: 2 kg

Proportional pressure control directional valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Operating pressure: 8 bar 120 psi -Dimensions: 200/85/H75 mm -Weight: 2 kg

Proportional pressure control directional control valves, solenoid valves, pneumatic valves, air valves, pressure valves, valve blocks, control blocks -Operating pressure: 8 bar 120 psi -Dimensions: 200/85/H75 mm Price: per piece -Quantity: 2 available -Weight: 2 kg/piece

Areva Teleperm XS Control Cabinet Standard body technology For the construction of Teleperm XS systems, Control cabinets of type SC 9422 (2200 x 900 x 400 mm deep), protection class IP30, are used. The cabinet is equipped with cable interceptors with umbrella rail. The cabinet is designed for seismic loads. Cable entry and power supply is generally done from below. In the standard cabinet, the subracks are mounted in the middle area. To the left and right of this are areas for mounting cabinet connection elements and transceivers. Terminals are used to connect peripheral cables. Other connection technologies such as Maxi-Termi-Point are also possible. Field cables are to be shielded with wires twisted in pairs. Buses are implemented inside a cabinet via conventional cables, outside the cabinet via fiber optics. Teleperm XS is suitable for systems with surface earth ...

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder, control cable, control line -Manufacturer: Wieland, control cable for crane remote control -Cable length: 5 m -Connector: DSE connector 16-pin -Transport dimensions: Ø 400 x 130 mm -Weight: 3.8 kg

Vibration control, control electronics KÖBERLEIN RMA-POWER-BOX 107/24/4Q ( RMA-POWER-BOX107/24/4Q ) Input: 24 V DC Output: 10...24 V DC spare part for Köberlein S 160 700 Dimensions: 140 x 180 x 70 mm

Control Directional Control Valves, Hydraulic Valve BOSCH 4WRPEH 6 C4 B25P-2X/G24K0/A1M ( 4WRPEH6C4B25P-2X/G24K0/A1M ) 0811404646 315 bar 24 V DC used, tested ! Dimensions: 200 x 50 x 120 mm

CNC control in the control panel / machine operating terminalCNC path control FANUCTtype A14B - 0048 - 0002Year of construction: 1990- Machine control panel- electronic handwheel- Flexible silicone PC keyboardDimensions WxHxD: 600 x 260 x 350 mmWeight: approx. 40 kgComes from a GILDEMEISTER CNC lathe.From stock, function not tested, ideal as a spare parts carrier.; used

CNC Control, Numeric Control, from MAX MÜLLER GILDEMEISTER MD 5S Type Eltropilot MByear of construction approx. 1980Rack with 20 module locations - 12 built-in modulesBuilt-in modules:1 Piece 0.651.406-19.3 UNI 030655-1017 Universal Interface1 Piece 0.650.847-56.1 O32 Output Card2 Piece 0.651.708-57.3 I32 032937-1017 Input Card1 Piece 0.652.138-36.1 APC1 Piece 0.651.928-25.3 LAB Position Control1 Piece 0.651.400-22.31 Piece 0.860.204-59.1 B321 Piece 0.652.128-35.0 RE41 Piece 0.651.269-26.0 ITY 030645-1017 Serial

CNC Control, Numeric Control, from GILDEMEISTER GDM 65/2AGILDEMEISTER Type Eltropilot EP20 GD-2ABead 1989Order: 150 299Ser. No.: 0.854.183Power supply: 220 VAC 50 HzRack with 20 module spaces - 11 built-in modulesDimensions W x H x D 480x 260 x 220 mmWeight approx. 7 kgThe control comes from a lathe Gildemeister GDM 42/2A. Further components from the Gildemeister can be found under stock numbers: 60343, 60346, 60347; used

CNC Control, Numeric Control, CPU Rackaus OKUMA LB 10OKUMA Typ OPUS 5000 CPU /IF RACK 9ANr.: E7191-292-325-1Baujahr 1985Ser. Item no.: 003184Dimensions W x H x D 390 x 345 x 240 mmThe device is still ready for operation installed in an OKUMA LB 10. Further components from OKUMA can be found under stock number: 60403, 60404, 60405, 60407, 60408, 60409, 60410, 60411; used

Indramat DDS02.2-W100-BE12-01-FW Digital AC Servo Controller DDS02.2-W100-BE12-01-FW Indramat Digital AC Servo Controller 100A Cooling Type: Air More items - new and used - can be found in our shop! International shipping costs on request!

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -Hydraulic control block comes from a TRUMPF Sunimat 400 punch press Manufacturer: Yuken -Valve type: MSW-01-X-30 -Valve Type: FHCG-02-30-N-A100-1004 -Valve Type: DSG-01-2B2-A100-5032 -Voltage: V -Pressure: max. bar -Dimensions: 340/290/H360 mm -Weight: 50 kg

Control, control block, pneumatic control -Manufacturer: Festo, pneumatic control -Solenoid valves: Type 533345 / 533342 6 pieces each -Electronic module: MPA1-FB-EMG-8 3 pieces -Interlinking block: CPX-GE-EV-S / CPX-FB13 -Interlinking block: CPX-GE-EV / CPX-AB-8-M8 -End plate: CPX EPL-EV -Electronic module: MPA1-FB-EPL-EU -Valve terminal: MPA-FB V1 -Individual components: see photos -Shipping/Price: complete -Dimensions: 580/130/H60 mm -Weight: 3.6 kg

Control, control block, pneumatic control -Manufacturer: Festo, pneumatic control -Solenoid valves: Type 533345 3 pieces / 533342 9 pieces -Electronic module: MPA1-FB-EMG-8 3 pieces -Interlinking block: CPX-GE-EV-S / CPX-FB13 -Interlinking block: CPX-GE-EV / CPX-AB-8-M8 -End plate: CPX EPL-EV -Electronic module: MPA1-FB-EPL-EU -Individual components: see photos -Shipping/Price: complete -Dimensions: 530/130/H60 mm -Weight: 3.4 kg

Control, control block, pneumatic control -Manufacturer: Festo, pneumatic control -Solenoid valves: Type 533345 / 533342 6 pieces each -Electronic module: MPA1-FB-EMG-8 3 pieces -Interlinking block: CPX-GE-EV-S / CPX-FB13 -Interlinking block: CPX-GE-EV / CPX-AB-8-M8 -End plate: CPX EPL-EV -Electronic module: MPA1-FB-EPL-EU -Valve terminal: MPA-FB V1 -Individual components: see photos -Shipping/Price: complete -Dimensions: 580/130/H60 mm -Weight: 3.6 kg

Control cabinet with content consisting of EATON switches Auction-ID: A1-50846-202

Control cabinet for the water industry with contents consisting of: - HITACHI EH-D23DRP - 2x HITACHI EH-D6EAN - OMRON S8VK-G12024 - OMRON S8VK-G48048 Auction-ID: A1-50846-203

Spur gear with drive motor 30 kW (e.g. suitable for a ball mill), shaft diameter 45 mm, N1 = 1,450 UPM, N2 = 14.5 UPM, drive shaft diameter 130 mm, with electric brake, coupling with counter window 600 mm diameter. Oil 190 CSX/50C - Wa-No. 369226. Complete on foundation frame.

Technical data: Make: Moehringer Width: 1500 mm Length: 1000 mm Roll diameter: 108 mm - With stud rolls - Used to transport parquet friezes Pictures and further information on request

Filtration / cooling unit Furbished with 2 pcs of water coolers and 2 filterhousings PALL 8304 X= Lengths All kind of filterelements available in differnt micron ratings. Ideal to solve both filtration and cooling on various installations using Hydraulic Oil

Filtration unit furbished with 2 PALL 8304 X-length housings For Hydrolic and lube oil filtration Any filterelements available on request

Cat.-Nr. 08-1210 in a very good condition with flat bottom Measurements: Width: 4600 mm Depth: 5800 mm Height: 4350 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cooling unit Bitzer 4P-10.2Y-40P with condenser condenser for TK or Plus cooling. For more information call 00436641838175 or Info@frigocom.at

Cat.-Nr. 08-1209 in a very good condition with Flat Bottom Volume: approx. 25.000 Litre / Chamber Measurements: Width: 4600 mm Depth: 5800 mm Height: 4350 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-1160 in very good condition Measurements and Weight: LxWxH: 80x40x105 cm Weight: 30 kg Manufacturer: Maselli Misure Process Analisers Model: UR 6 W AL Serien-Nr 30384 Range 40 150 0 Temp: 20°C Voltage: 220 V For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

SAW CARRIAGE DISTANCE: 610-710 MM, RANGE OF CUTTING: HEIGHT: 200 MM, WIDTH: 200 MM, DRILL DIA.: 12 - 40 MM; STROKE: 630 MM;

Freestanding distillery – 350 liter capacity Equipment: - Heating: by steam (against extra charge combustion chamber with water bath) - Steam jacket / water bath 4 mm stainless steel - Copper bubble Ø 900 mm, semi-conical - Filling DN 350 cast brass - Medium column / special fine burner with 3 trays - And attached tube end phlegmator and Kotzbecken - Incl. 4 sight glasses - Outlet ball valve DN 100 - Connecting piece agitator - Special tube cooler made of stainless steel including brandy - Spirit tubes stainless steel Basic price distillery, filling volume 350 liter: 32.620,00 € Additional equipment: Combustion chamber for solid fuels 48 kW made of 8 mm steel, incl. Smoke gas heat exchanger 8-pipe system 2.750,00 € Insulation water bath / steam bath made of stainless steel with 30 mm rockwool 1.760,00 € 4 connectio ...

1 of used hot-melt unit, make Nordson, type 3700-2BB36. Tank capacity 13.6 kg, melt rate 18.1 kg/hour. Suitable for 380-415/220-240V, 50/60Hz. With Pneumatic piston pump 21:1, non-recirculating manifold for 6 hoses witih standard filter, Multiscan controls for 6 hoses and guns. Hoses and guns NOT included. New 1990.

Sell used hydraulic power units 5. 3 with 11 kW electric motor- 2 with 4 kW electric motor- Price per PCs. Motors from ASEA Sweden

PUR bag melter for processing from 2 to 3 kg PUR-DIN aluminium foil bags, Technical description: Hose connections, temperature controller PT100, 2 internal heating circuits, storage tank approx. 2.8 kg volume for bag change, 1 gear pump 7.3 cc drive via three-phase motor, glue stop shut-off direction, level monitoring for the Bag change with optical and acoustic signal, electronic Control with larsicht input (multilingual), weekly timer, digital inputs and outputs for integration to the mother machine, melting capacity adhesive-dependent, temperature reduction, Operating voltage 400 V Including - Hot glue hose length 3.5m i.D.10mm - Application head large glue outlet 5.6mm probe Pt100 - Homag cover plate QA65 with hose aging re - Switching amplifiers - Teflon probe S-506

Type: ZSA 1500 Working width: 1500 mm Flight circle metering drum: Ø 1600 mm Motor power: 18,5 kW Length metering device: 7800 mm Width metering device: 1600 mm Volume metering device: approx. 25 m ³

Hydraulic

The teedwater is pre-heated in the exchanger E009, by steam condensation coming trom the last column, and in the pre-heaters F004-F001 by condensate produced in every effect. The teedwater evaporates partially in the first column (E001) as heated by industriai steam. The industriai steam passes through the pre-heater F001 and is drained by steam trap ST001. The produced pure steam trom the top and the water not evaporateci trom the bottom 1 -pass to the tollowing effect, where the process is repeated at lower pressure and temperature. The distillate produced by pure steam condensation goes to the pre-heater F002. The process is repeated for all columns in the same way. The steam produced in the last effect is condensateci and cooled together with the distillate coming from pre-heaters in the exchangers E009 and E01O, by teed and cooling water. 1 - SINGLE EFFECT RUNNING DESCRlBTION ...