techno grafica used for sale

Description Techno-Grafica Diamand TPP 1550 HS Printing Plate Developing Machine with Two Brush Rollers for Kodak Trillian SP from 2016 with Various Replacement Brushes and Rollers

Rex Technologie GmbH vacuum filling machine with lifter for 200 liter meat bins, type: RVF 760, serial number: 74011020712, 400 V, 50/60 Hz, 34,50 A, with Busch vacuum pump, dimensions: 1700 mm x 1300 mm x 2050 mm.

AMT Technologies PostPro3D – Chemische Glättungsanlage für 3D-gedruckte Thermoplaste Baujahr 2020 | Gebraucht | Standort Europa Diese PostPro3D-Anlage von AMT Technologies ist eine automatisierte Nachbearbeitungslösung zur chemischen Glättung von 3D-gedruckten Bauteilen aus thermoplastischen Polymeren. Die Technologie ermöglicht Oberflächenqualitäten vergleichbar mit Spritzgussteilen und schließt die Lücke zwischen additiver Fertigung und serienreifen Oberflächen. Technische Merkmale: Intelligente, automatisierte Prozessführung Chemisches Glättungsverfahren für Thermoplaste Reproduzierbare Oberflächengüte Geeignet für Serienproduktion Wirtschaftliche Vorteile: Die Anlage reduziert manuelle Nacharbeit erheblich und senkt damit Durchlaufzeiten sowie Betriebs- und Wartungskosten. Für Fertigungsbetriebe, die 3D-gedruckte Teile in größeren Stückzahlen mit hohen Oberfläc ...

Tecnograf ANT250, year: 2010, minimum size: 210 x 145 mm, maximum size: 350 x 420 mm, thickness 2.5 to 45 mm, speed up to 250 cycles per hour, this machine has two glue tanks, 1 kettle for hot melt glue, 1 kettle for PUR glue and PUR cleaning solution

Techno Pack double Clipper DCA E 200 fully automatic coffee machine with hanger loop dispenser Fill caliber up to 65 mm

Tipper Tie Technopack TCNV pneumatically operated single-clipper for natural casings, ring-shaped casings, end casings or artificial casings made of collagen, cellulose or PVDC, as well as bags made of polyester, polyethylene or linen The machine is immediately available and can be tested in Koblenz, Germany.

High-performance band sawing machine for cutting pipes and round material in multi-channel process with symmetrical material supply and discharge on both sides Manufacturer ZS-Technology Meissen Type MKS 6/2 Built in 1998 - 9 two-sided assignable pipe ducts - max pipe length 8,000 mm - Cycle time approx. 90 sec. / Stroke=5 sec. / pc. - max. section length 100 mm - Diameter 20 - 100 mm Materials Structural steels, C-steels, low-alloy steels, rolling bearing steel (especially 100Cr6) Pipe dimensions / pipe sections - Pipe outside 25 - 128 mm - Pipe wall thickness 3.2 - 16 mm - Pipe length 6,000 mm Required footprint for all components 7,000 x 16,200 mm Search terms: band saw machine, multi-channel band saw, backdrop band saw, high-performance band saw machine

Industrial PC or control unit EST. technology consisting of various Flexcommander modules: -EST technology Flexcommander power supply 230V, part No.: 008741 -EST technology Flexcommander disk drive floppy, part No.: 0008740 -EST technology Flexcommander CPU, part No.: 0008734 -EST technology Flexcommander Ethernet, part No.: 0008738 -EST technology Flexcommander SLAVE PROFIBUS DP, part No.: 0008737 - EST technology Flexcommander MSR Channel1 + 2, part No.: 00087355 -EST technology Flexcommander MSR Channel1 + 2, part No.: 00087355 The Flexcommander modules are older year manufacture and used (see also images). The function was not tested, therefore no guarantee or warranty.

1 x Alpha Technologies Mooney MV2000e Viscometer software discs and operation manual are included. You will have to register the software. PC not available. In good condition.

TIPPER TIE TECHNOPACK KDCNV semi automatic double Clipper

TIPPER TIE TECHNOPACK TCNV-200 BT pneumatically operated single-clipper

0: 200 °C Torque: - 0 Dimensions (HxWxD): 680 x 1320 x 760 mm weight: 177 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete HPLC-MS system Agilent 1200 with single Quad ESI mass-spectrometer 6110 E1M18 foreline pump Edwards G1311A quaternary pump G1329A autosampler G1379B micro vacuum degasser G1316A column oven G1314A variable wavelength UV detector Incl. measuring computer / software Tel: 06721-9886710

Pharma Technology DV1300 +VC vertical tablet/capsule deduster, output 50,000 to 2,000,000 pieces/hour.

Key data: 199 , 6 , 40

FS Elliot Centrifugal Compressor with inverter starter = 1 unit Model : P300-300 Brand/ Manufacturer : FS Elliot (FSE) Air Quality : Oil-Free (ISO 8573-1 Class Zero) Compression : Three Stages Compression Cooling Method : Water Cooled Motor Power : 415V, 50Hz, 3 Phase Main Motor : TEFC, 415V, 3PH, 50 Hz Motor Type : Inverter type; brand WEG; IE3 Motor Starter : Inverter type, Free Standing Inverter Drive Starter without a line synchronous bypass system. designed and supplied by manufacturer, cable connection from starter to motor shall be supplied by customer or can be quoted separately. Shaft Power : 264.93 hp or 198.7 kW (} 4%) Delivery Air Flow Rate : 40 m3/min (} 4%), based on cooling water inlet temperature 32°C, inlet air temperature 35°C, Relative Humidity 80%. Discharge Pressure : 6.0 barg. Discharge Temperature : 37.3°C Vibration Sensors : 2 sets, Low and H ...

Manufacturer: Lieder (ROBOT FOOD TECHNOLOGIES) Type: TA54V-2 4 Lines Size of tubes: Ø 75 mm Filling volume: Filler 1: 25 - 50 ml Filler 2: 100 - 250 ml (you can make two different products into one cup) Capacity: up to 10.000 cups/h Cup disinfection: by H2O2 Including: - carton erector and packer 4x5 - Clean air filter (Laminar flow) - CIP installation - SIEMENS S5 control

Radio system, antenna contact component, wireless RF modem, pico cell antenna -Manufacturer: CP Technologies, Pico Cell Antenna 2.4 GHz Ovp -Type: WAN-2185 -Number: 2 antennas available -Price: per piece -Cardboard dimensions: 280/240/H85 mm -Weight: 0.7 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.45 m -Transport dimensions: 600/460/H80 mm -Weight: 3.9 kg

This machine is particularly suitable for the processing of electric wastes with PVC, rubber, iron and lead. The processing of the cable is carried out in the two-blade system both knives from both sides at the same time. - cut the cable of 2 pages in diameters ranging from 30-150 mm - are independently adjustable continuous operation or foot control can be set at Dashboard roles system to the Insert the cable in the machine fast and simple replacement of the MesserDurchmesser cable: 30 to up to 150 mmTrenngeschwindigkeit: 12 meters per MinuteAntriebsleistung: electric motor 6 KW / 380 VGesamtgewicht: 600 KgAbmessungen (Lxwxh) : 1800 x 1000 x 1200Anzahl of the blade: 2 StückMesserverstellung: mechanical

New machine - Contents: 1,000 litres when water is filled - Usable volume: approx. 800 litres depending on product characteristics - Maximum filling weight 1,000 kg - The mixer has a central bottom outlet - Containers, lids, swivel arm, mixing screw, V2A outlet housing

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.30m -Transport dimensions: 600/420/H90 mm -Weight: 3.8 kg

CNC control, control rack, electronic module -Manufacturer: Power Automation / Innovance Technology, Control -Type: Replacement device ArtNo. 181998 -Individual components: see photos -Dimensions: 255/330/H140 mm -Weight: 5.7 kg

We sell 300 x Session Smart Routing – SSR 120AE from 128 Technology , brand-new (128 Technology has been acquired by Juniper) In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have a ...

The Technopack Tipper Tie KDCV 90 is a professional automatic clipping machine designed for sealing natural and artificial casings in sausage production and other food processing applications. The machine delivers fast and accurate double clipping, ensuring secure closure and consistent product quality. Designed for demanding industrial environments, the KDCV 90 can be easily integrated with vacuum fillers and other meat processing equipment. Its durable stainless steel construction provides excellent reliability, long service life, and easy maintenance. The pneumatic operating system ensures stable performance and high productivity, while the user-friendly design simplifies daily operation. This machine is an efficient solution for food manufacturers requiring precision, reliability, and continuous production performance. Technical Specifications Manufacturer: Technopack / Tipper Ti ...

0: 200 °C Torque: - 0 Dimensions (HxWxD): 680 x 1320 x 760 mm weight: 177 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type: Clipper Tipper Tie Made completely of stainless steel and robust industrial plastics Easy to clean due to smooth surfaces Inclined surfaces to improve drainage of water S-clip on reels S-Clip: S 625, S 628, S 632, S 638 Dimension of the machine: Width: 100 cm Depth: 78 cm Height: 180 cm Power input: 0.1kW Fuse Connection: 2.5A Compressed air: 4-6 / 0,4-0,6 MPa Delivery time: 1 working day after payment

Manufacturer: Vi Technology Model: Vi 5K 3D Type of Machine: AOI Year of Manufacture: 2020 Technical Specifications: - Configuration: Single - Max PCB Size: 533mm x 325mm - Field of View: 61.1 x 44.9 mm - Camera: 8 Mpix, 12 bits CCD, telecentric lens Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Vi Technology Model: Vi 5K 3D Type of Machine: AOI Year of Manufacture: 2015 Technical Specifications: - Configuration: Single - Max PCB Size: 533mm x 325mm - Field of View: 61.1 x 44.9 mm - Camera: 8 Mpix, 12 bits CCD, telecentric lens Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Vi Technology Model: Vi 5K 3D Type of Machine: AOI Year of Manufacture: 2011 Technical Specifications: - Configuration: Single - Max PCB Size: 533mm x 325mm - Field of View: 61.1 x 44.9 mm - Camera: 8 Mpix, 12 bits CCD, telecentric lens Find more here - .ucymachines/ Contact us at - sales@ucymachines

Clipping machine Technopack KDCVT 200 Type: KDCVT 200 Dimensions: 100x60x190cm Maximum closing diameter: 120mm Delivery time: 30 working days after advanced payment

Configuration: Single Track Multi Busbar, voltage: 380VAC 3P/N/PE/50Hz, power: 15kW, compressed air: 0.6MPa, machine dimensions X/Y/Z: approx. 7000mm/2050mm/2370mm. The stringer is currently retrofitted for TECC-Connect and can be converted back to the soldering process. The machine is fully functional and ready for operation. Documentation available. Inspection possible by arrangement.

akvoFloat is a system for wastewater treatment, especially for removing solids and oil from old emulsions and wash water.

A fully equipped line for the production of polypropylene yarn type Technorope 1000/100/PP-300: Manufacturer: Sima Srl Useful width of the cutting head: 1000 mm Capacity: up to 300 kg/h, depending on the type of yarn Twister: 16 (with 16 batteries) Yarn types: from 5000 to 120 000 denies

This 3-axis PHENIX TECHNOLOGIE MD-JET 2040 was manufactured in 2015. It features a working area of 3,000 × 1,500 mm and can cut materials up to 70 mm thick. The machine utilizes a Hypertherm HyPrecision 75S high-pressure pump with a maximum cutting pressure of 4,137 bar. If you are looking to get high-quality waterjet cutting capabilities, consider the PHENIX TECHNOLOGIE MD-JET 2040 waterjet cutting machine we have for sale. Contact us for further details.

This TECHNOLOGY Tecnotransfer 1500x3000 was manufactured in 2007. A robust CNC punching machine, it offers precision and efficiency for your metalworking needs. If you are looking to get high-quality punching capabilities, consider the TECHNOLOGY Tecnotransfer 1500x3000 machine we have for sale. Contact us for more information.

working area: . mm material: . capacity: . Stück/h weight: 250 kg Machine number: 05.0501.01Nominal vacuum 0.5 h PAThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mooney Viscometer Make: Alpha Technologies Model MV 2000 Rotational Speed 0.1 to 10 rpm, temperature Range ambient to 200C, torque Range 0.01 to 200 MU, rotors large: 38.10 mm D, small: 30.48 mm D.