teca print used for sale

Plate bend Ingkant SM 52; cleaned and tested; Table equipment; suitable for Heidelberg SM 52 plates. Plate bender SM 52; good condition; cleaned and checked; table top model; used for Heidelberg SM 52 plates.

Printing plate bending for Heidelberg SM 52 Beil PB-S 52; good condition; cleaned and tested; Stand-up device; suitable for printing plates Heidelberg SM 52. Plate bender for Heidelberg SM 52 Beil PB-S 52; good condition; clened and checked; used for Heidelberg SM 52 plates.

50 Zebra label printers Are sold here Thermal Transfer / Thermodirect as a package Printers originated from insolvency and were still in use until closure

Printing plate development machine Koenings KTW 653; good condition, cleaned and tested; 3 brushes; inlet width 650mm; suitable for waterless panels. Plate processor Koenings KTW 653; good condition; cleaned and checked; 3 brushes; width 650mm; Used for waterless plates.

Qty. 1 Second-hand die cutter with flexo printing press Mfc.: M&M Mediterránea de Maquinaria Type: WRC 98 1150-1600/DISTENCO Built: 1999 Flexo printing press with 3 colours Capacity: 50,000 boxes in 1 shift Input material: cardboard of max. dimensions: 1,150 mm x 1,600 mm Output material: boxes (for pizza) Included in the scope: approximately 15 tools for different sizes of boxes New electronics The complete die cutter with flexo printer will require approximately loading on 2 trucks. The box production process is as follows: Ready-made cardboard formats are inserted into the machine, the machine prints up to 3 colours, cuts the box and sends it on with a conveyor and stacks it.

Single head INK-JET printer designed for coding and marking fast moving objects on a conveyor without requiring direct contact 1 to 5 print lines -Three possible applications: Mini (2 lines), Midi (4 lines), Maxi (5 lines) -Prints almost any surface -Prints even at high production speed -Pressure height from 1 mm to 15 mm -Various inks are available for special applications

Reference Num.: 3742 Brand: Adast Type: Tiegel Grafopress GPC Size: 260 x 380 mm Available: directly Status: In production Location: Deutschland Sheet size: max 260 x 380 mm

Plate punch HD/Nela SM 52; good condition; cleaned and tested; Table equipment; Punching 425mm Autoplate. Plate punch HD/Nela SM 52; good condition; cleaned and checked; table top machine; punch size 425mm autoplate.

M. No.: 560037 // Com.No.: 451.4013 // No. 2620 Colours: 6 // Performance: up to 36’000 cups per hour Equipment / Additional information: Consists off: • Stacker • Printing machine • Cup feeding • Stapler Max. cup rim diameter: 130 mm Min. cup rim diameter: 55 mm Production speed each according to cup size, quality and Raw materials with UV drying: up to 24,000 cups per hour (without positioning) With positioning 12'000/h - 15'000/h depending on cup, format and flap. El connection value with drying: approx. 26 kVA Electrical connection: 3 x 400 V, 50 Hz Air connection / consumption: 6 bar / approx. 50 m3/h Weight: approx. 7,800 kg This machine doesn’t have cup positioning.

2014 Dimension SST 1200ES - washer included and a lot of washing ”powder” and build plates. - Trolly

There is a large item available to Zebra printer 140 and 170 width Versions Xi2-Xi4 Zebra's super-fast and durable 140Xi4 is easy to integrate and provides high reliability for action-critical applications. The 140Xi4 is super fast at 356 mm per second. This high performance and its steel sheet construction make it the ideal printer for high-throughput, high-throughput applications. The 140Xi4 is also well-used for applications where labels are needed quickly, either on demand or in larger quantities.

Manufacturer: Xerox Model: Impika Compact Condition: Used Find more here - / Contact us at -

Printing plate punch/lacquer plate punch for Heidelberg XL 145/162; good condition; cleaned and tested, perforation 1200mm autoplate. Plate punch/ plate punch for varnish plates for Heidelberg XL145/162; good condition; cleaned and checked; hole size 1200mm autoplate.

CSAT printing system for blister film coloured printing. Unit is suitable for printing counterfeit-proof solutions for pharmaceutical packaging. Resolution: 1,200 dpi, output: 0.5 to 20 m/min.

Manufacturer: Xerox Model: Impika Reference Condition: Condition Find more here - / Contact us at -

Pneumatic plate punch INGEKBA Rapida 142; good condition: perforation 780mm autoplate; investment contact; compressed air required. Pneumatic plate punch KBA Rapida 142; good condition; punch size 780mm autoplate; feeder control; Compressed air needed.

Printing plate die-cutter for Roland 300 presses with CPL system. Tested, all punching modules without defect. Stock goods, can be shipped immediately.

We offer a highly productive 3D printer for industrial series production Trumpf TruPrint 3000 The 3D printer has already been dismantled by the manufacturer Disassembly logs are available as well as functional logs that prove that the machine was in operation before dismantling All axles are professionally secured The machine can be transported on a normal standard truck Faster to a high-quality 3D component D1. Machine concept The TruPrint 3000 is a universal medium format press with external parts and powder management for industrial production Complex metallic components by means of 3D printing. Through your large construction volume, it offers a high degree of flexibility in terms of Size, number and geometry of each application. Bcu70Qrgxc Specifications TruPrint 3000 Build volume (cylinder) mm x mm Ø 300 x H 400 Processable materials5 - Weldable metals i ...

We offer a highly productive 3D printer for industrial series production Trumpf TruPrint 5000 The 3D printer has already been dismantled by the manufacturer Disassembly logs are available as well as functional logs that prove that the machine was in operation before dismantling All axles are professionally secured The machine can be transported on a normal standard truck Faster to a high-quality 3D component The highly productive, semi-automated TruPrint 5000 3D printing system makes you fit for industrial series production. With features such as optional 500 °C preheating and Fullfield Multilaser equipment with three 500 watt TRUMPF fiber lasers, you are well equipped for highly demanding industrial applications. The machine manufactures high-quality components made of different metallic materials quickly and reliably – and at the same time meets the high quality stand ...

Manufacturer: Jetrix Model: KX7 Year of Manufacture: 2014 4 colors + 2white size cm 305x250 Find more here - / Contact us at -

Travel: 0 x 0 x 0 mm [ X x Y x Z ] Metal 3D Printer Laser Type / Power: Yb Fiber Laser / 250 W Wavelength: 1070 nm Lens: F-Theta Precision Lens Volume of construction: 100 mm x 100 mm Reservoir volume: 200 mm x 200 mm Coater: Rotation-guided coater Gas connection: Argon / Nitrogen Layer thickness: 20 - 100 microns Scan: jog 20 m/s, operation 6 m/s Spot size: min. 40 microns Chamber opening: 450 x 180 mm

For sale is a used Markem Imaje large print printer 5800, which produces the printed image with wax. It is a conveyor belt and bracket for printer unit and controller. Print speeds of up to 178 meters per minute at approx. 200dpi resolution. Maximum print height per print head of 65 mm (print length flexible). Up to two print heads can be controlled; Print height up to max. 130 mm possible on one side, With Ethernet and USB interface / inputs and outputs freely programmable All-in-one printhead design for space-saving integration.Short heat-up phase max. 20 minutes. Colour touch display integrated in the controller. Printing costs according to Markem Imaje 1450ml = approx. 320 EUR, 400,000 layouts per year, 7267 ml necessary, annual costs of operating resources, estimated: 1,600 EUR Operating costs per tray, estimated: 0.004 EUR SAMPLE CALCULATION / SAMPLE LAYOUT

Printing plate deal Grafoteam TAT 48; good condition; we overhaul before delivery; Max. Plate format 1630x1300mm, min.510x400mm; Interface connection possible. Turn around table Grafoteam TAT 48; good condition; will be rebuilt before shipping; max.plate size 1630x1300mm, min.510x400mm; possible to connect with other machine.

Wärtsilä Lipstronic thruster control system overhauled. W006927795 Lipstronic 793.083.001.0001 Printcard Thruster Control System

STRATASYS F270 FDM 3D printer was built in the United States by STRATASYS. The machine is used for prototyping and production of components with complex geometries in the FDM technology, which involves applying successive layers of molten material according to pre-calculated print paths. The process uses a combination of a build material (ABS, ASA, PLA) and a support material (QSR). 3D printing is performed inside a sealed work chamber by two print heads. Throughout its lifetime, the F270 industrial 3D printer has operated for a total of 17000 hours and has been regularly serviced. During the service work, the touchscreen display, power board, material drawer rail, material feed lines to the heads and Y-axis gantry were replaced. The STRATASYS 3D printer is offered with additional print heads. Technical specifications of the STRATASYS F270 FDM printer - software: GrabCAD Print -  ...

Keyence Agilista 3200W High Resolution Industrial 3D Printer Material Jetting AR-M2 AR-G1L AR-G1H Type: Agilista - 3200W Manufacturer: Keyence Corporation, Japan Date of purchase according to invoice: 18.05.2017 Operating time: 40,985 h Printing time: 1,907 h Specifications: - Printing material: AR-M2 (transparent printing material), AR-H1 (heat-resistant printing material), AR-G1L (silicone rubber [low hardness]), AR-G1H (Silicone Rubber [High Hardness]) - Support material: AR-S1 (water-soluble support material) - Build space: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi - Layer thickness: High resolution AR-M2: 15 μm, normal Resolution AR-M2: 20μm, AR-H1: 20μm, AR-G1L/H: 30μm - Interface: Ethernet 10BASE-T / 100BASE-TX - Operation: color touch panel - Dimensions 95 x 70 x 136 cm - Weight 188 kg 3D, 3D Printer, 3D Printer, Agi ...

Printing plate punch hatchet; good condition; Max. Plate width 205cm; Perforation 1200/780/425mm Autoplate; 1200 and 425mm can be parked. Plate punch hatchet; good condition; max.plate width 205cm; punch 1200/780/425mm autoplate; 1200 and 425mm can be suppressible.

SHIKI Model PC 30, year of construction 1980, 1x letterpress (2 colors); lamination unit; punching unit; Longitudinal section, 2 hot foil plates, in good condition, immediately available

ACKLEY TABLET PRINTING MACHINE, MODEL 01511-00038 Year of construction: 2016 Precision rotogravure printing system for tablets and capsules. For pharmaceutical, nutraceutical and confectionery products. Perfect for mid-sized productions. CHARACTERISTICS • adjustable ramp Feed Angle, based on product flow characteristics • continuous motion, multiple-lane carrier bar conveyor feed system that exposes the top surface of the product for inspection and printing • safety enclosure with interlocked doors and enclosed beam path • quick changeover of 60 minutes • requires only compressed air and power for operation • user friendly Operator Control Interface with 17” touch-screen HMI • programmable settings for up to 50 products PRODUCTION • Output: Up to 150,000/h • Printing: alpha-numeric text or graphic logos; can print with solvent or water based ink solutions � ...

Printing plate transport system Grafoteam MDT 36 TW; will be overhauled before delivery; right or left display; Max. Plate size 880x660mm; Color sensor. Printing plate conveying system Grafoteam MDT 36 TW; will be rebuilt before shipping; delivery to right or left side; max.plate size 880x660mm; color sensor.

S. No.: 12991843 // Power : Up to 13,000 #10 envelopes/hour in draft quality Up to 13,000 #10 envelopes/hour in letter quality Up to 12,000 #10 envelopes/hour in executive quality Image Area: 9.4" x 15" (23.876 x 38.1 cm) Equipment / Additional information: Media Size: Width: 3” minimum to 12.25” maximum Length: 5” minimum to 15” maximum Thickness: Up to 1/4" (subject to weight) Print Resolution: 150, 200, 300, 600 dpi horizontal, 600 vertical Print Modes: Draft, Letter, Executive Documentation

Technical data Information on the technical equipment of the machine Length: 10509 mm Height: 2806 mm Total weight: 9500 kg Max. Printing speed: 11,000Dr/h Printing material width: min. 130 mm, max. 265 mm Print width with print mark: max. 254 mm Format length: max. 254 mm (10") Unwinding roll diameter: max. 1040 mm Unwinding spindle: 3" (max. 300 kg) Rewinder Spindle: 3" Grid Winding Spindle: 3" Reel diameter: max. 300 mm Grating trigger Roller diameter: max. 800 mm Components of the machine - Unwinder -Web trimming / edge trimming - Web edge control -Ionization device - Touch screen control panel - 2x Letterpress Printing Unit - 1x painting unit (Flexo) -Loop box - -Rotary die cutter with the following magnetic cylinders (Z72, Z74, Z76, Z78, Z80, Z84, Z88, Z92, Z96, Z100, Z104, Z108, Z112, Z116, Z120, Z124) - Wire mesh winding unit - Outlet part - C ...

Cloud m600 advanced inkjet printer, 3 print heads and cables, - Cloud-m600 advanced inkjet printer, 230V AC, - I/O connection cable control voltage 5V+24V DC, - Three print heads red, one without scraper plate, - Three print head cables 3m, - Connection cable for rotary encoders,

Printing Width: 1250 mm // Web Width: 1300 mm

Number Of Colours: 8 // Printing Width: 820 mm

Plate intermediate table MDT 480 C-800; condition outdated; new engines; new tapes; .max. Printing plate size 811x1200mm; Inlet and outlet sensor; height adjustable. Plate conveyor Grafoteam MDT 480 C-800; condition rebuilt; new motor; new belts; max.plate size 811x1200mm; in and outfeed sensor; adjustable in hight.

impressions: 28 Mio. max. printing speed sheets: 10000 /h max. paper size: 34 x 46 cm serial no.: 956.596 total weight with 2 piles: 1030 kg paper thickness max.: 0,3 mm numbering unit: minus Version Dimensions (L/W/H): 160x110x160 mm dampening system: Direktfilmfeuchtwerk Stack height: Anleger 490 mm Stack height: Ausleger 460 mm power required: 3,0 KW frequency: 60 Hz voltage: 220-240 V 3 inking forme roller per printing unit Blanket washer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number Of Colours: 8 // Printing Width: 406,4 mm

Number Of Colours: 8 // Printing Width: 430 mm

Printing Width: 1050 mm // Web Width: 1120 mm

technical details: - Thermal press for printing textiles (T-shirt, caps, towels, carrier bags, etc.) - Contact surface: 38 x 38 cm - Power: 1,750 W - Voltage: 230 V - Current: 7.5 A - Frequency: 50/60 Hz Shipping is of course possible. Shipping is plus freight and packaging costs, depending on size and weight. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

Manufacturer: ESC – Europa-Siebdruck-Centrum GmbH & Co. KG Model designation according to nameplates: PAJD 1100-2C/IR and Perfection 1100 2C/IR Year of manufacture according to nameplates: 2016 and 2017 Machine/Factory Numbers: 9960-14-1065 / 11661 Electrical connection: 400 V, 50 Hz Rated current: 120 A (nameplate PAJD) Nominal power: 76 kW (Perfection nameplate) Degree of protection: IP40 Belt type: IR temperature tunnel with conveyor belt (width according to series: 1100 mm) Assembly: IR drying system for screen printing or varnishing processes Design: Closed safety enclosure with access doors Application: Drying/shortening of printed or coated components Location: Schierling Viewing possible by appointment.

Label Printers Industrial Printers Thermal Transfer Direct Thermal Printers 1 x Honeywell Label Printer DMX-A-4212 New from Spare Stock 1 x Honeywell Label Printer DMX-A-6310 New from Spare Stock

impressions: - Mio. max. printing speed sheets: 10000 /h max. paper size: 38 x 52 cm serial no.: 8212074 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

• Designation:Infeed • Type / Model: 3738.0400 • Year of manufacture: 2019 Find more here - / Contact us at -

colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 115.163 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.