tba 9 200 used for sale

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp, impact cylinder -Stroke: 250 mm -Piston diameter: 6 inch -Piston rod: Ø 38 mm -Dimensions: 167/167/H555 mm -Weight: 22.45 kg/piece

2 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machines type RBNV 1280/975, year 2001, capacity 150 Kg each machine, both machines can run individually or coupled (total 300 Kg per batch), autoclave diameter 1280 mm, delivered with total: 4 carriers with 22 swords each, each word has a useful loading height 850 mm, 2 carrier for bumps or loose stock inside diameter 1200 mm and core diameter 300 mm and useful height 800 mm, each machine add vessel capacity 800L with mixer

2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -2 pillars: punching tool -Dimensions: 170/100/H130 mm -Weight: 5.3 kg

DAXNER vibratory discharge floor type VAB 900 VA version Engine Italvibras 0.45 kW Discharge ø 200 mm with flange The machine has been tested in our workshop

Item number: 90458-0601 Photocell for jaw system Tetra Pak aseptic filling machine

Article number: 90458-0601 Photocell for Tetra Pak aseptic filling machine

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, telescopic rails, pull-out rails -Rail height: 61 mm -Length retracted: 516 mm -Length extended: 985 mm -Price: per pair (left right) -Number: 2x pairs available -Weight: 2.45 kg

Hydraulic pump, oil pump, gear pump -Shaft holder: Ø 18 mm -Length: 35 mm -Dimensions: 215/153/215 mm -Weight: 6.8 kg

Transformatoren Technik Jahnsmüller TU6/90M Pri:115/230V 82/41A Sec:230V 39.1A Weight: 49.5kg

suitable for nitrogen all stainless steel belt width ± 660 mm nett belt length 9.000 mm total length ± 10.500 mm 12 kW

Make : Regal Model : 9000 YoM: 2004 Refurbished in 2018 Current Cup Dimensions: 71 mm ( This can be changed on request) Speed : 2400 Cups per Hour Stations : Cup Dispenser- Filler - Aluminium Lid - Sealing - Outfeed conveyor Controls : Very Good condition Available : Immediately after service Location : Dairy Machinery UK

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Roller diameter: 60 mm -Transport roller width: 995 mm -Square drive: 12/8/L10 mm -Price: per piece -Quantity: 28 pieces -Dimensions: Ø 60/1025 mm -Weight: 4 kg/piece

Horizontal milling machine Reckermann EW 900 Pony TNC 135 380 V 32 A 12,35 KW X 720 mm Y 370 mm Z 350 mm ISO 40 Weight 4 tons Vogel central lubrication Grooves 18 mm Speed range 40 - 2000 rpm Feed in all axes Data

Arburg April 2014 model 920H 5000-4600 500 ton Can be inspected and seen in production

3 x Mak 9M25 engines Available from stock 2850 Kw at 720 Rpm in good condition From our stock in Turkey

Welding fume filter, welding fume extraction, soldering fume extraction -Drive: 1.1 kW - Connection: 380V 50Hz - Flow rate: 700 m³/h -Max. Pressure: 1,600 Pa -Inlet diameter: 200mm -Outlet diameter: 250 mm -Number: 1 suction available -Dimensions: 1320/655/H1275 mm -Weight: 192 kg

Frame width: 1,170 / height: 900 mm / vertical depth: 900 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Frame profile: 85 mm Stand height: 900 mm Stand depth: 900 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x Workbench trusses, used Material color: yellow Box profile: 80 x 50 mm Clear width: 1,000 mm 08x locking pins, used Finish: completely galvanized

Frame width: 1,170 mm / height: 900 mm / frame depth: 800 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Frame profile: 85 mm Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x Workbench trusses, used Material color: yellow Box profile: 80 x 50 mm Clear width: 1,000 mm 08x locking pins, used Finish: completely galvanized

Manufacturer: MONTI ANTONIO Laminating-Coating Model: hot melt mod. 908 Type: Fleece and Foam LAMINATION & Coating with COATEM Foam make to inject direct to fabric for Coating. Working widh: 1800 mm Manufacture Date: 2003 (like new with new spare cylinder -hotmelt spareparts) With new spareparts Complete Modernisation in year 2016 with new electricity and software. description: working with SL1 Pleva weftstraitner go to 2 line Lamination Foam or fleece to Fabric

Roller Wacker WHK 90 L, self-propelled hydraulic articulated roller, hydrostatic drive, 2 cyl. Lombardini diesel engine, air-cooled, 10 kw/14 hp, hydraulic articulated steering, vibration compression. Working width 850 mm, defective water sprinkling, weight 1,335 kg, mast for rotating warning light. Built in 1987, machine running. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for facility and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping work and disposal, environmental care, engines and more...

three-phase motor, electric motor -Manufacturer: Dietz, electric motor type DR 90L/4n -Power: 1.5 kW -Speed: 1720 rpm -Shaft: Ø 24 x 50 mm -Design: B3 -Protection class: IP 33 -Number: 2x motor available -Price: per piece -Dimensions: 325/240/H175 mm -Weight: 18 kg/pc.

COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine was manufactured in Italy in 1988. The thermoforming line, consisting of, among others, a heating station, a bulge photocell and a moulded parts conveyor, is designed for the fully automatic production of oversized parts using the thermoforming method. The COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine is equipped with a gauge measuring the thickness of the platen in order to avoid accidentally taking two platens from the package at the same time. The platens, by means of transport grippers actuated by pneumatic cylinders, reach the individual work stations, i.e. the preheating station, consisting of two opposing panels, the plasticising preheating station and the forming unit. In the forming unit, the thermoforming process takes place, during which a BOTTINI GIANNI press with an upper and lower moving table peripherall ...

Technical data for the pallet rack stand: Shelving system: Bito Type: PL 38 The scope of delivery includes: 01x Pallet racking stand, used Material color: sendz. galvanized Stand type: P 20 Stand profile dimensions: 90 x 65 x 2.0 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) 4,800 mm high 900 mm deep Hint: The yellow stand guards are not part of the delivery, but can be purchased optionally.

centrifugal fan, dust extraction fan, fan, suction, dust blower -Motor power: 15 kW -Speed: 2925 rpm -Total pressure: Pg 33 m bar -Total pressure: Pst 30 m bar -Volume flow: 9660 m3/h -Inlet connection: O 400 mm -Outlet connection: O 400 mm -Dimensions: 1090/860/H1200 mm -Weight: 238 kg

Technical data for the grating: Manafacture: Gi-Ro Vreden Condition of the goods: new (unobstructed) Reason for return: Wrong order end customer The scope of delivery includes: 01x Press grate, new (unobstructed) Material color: hot-dip galvanized Ctow7lyof8 Total depth: 1,000 mm (support rod direction) Total width: 980 mm (crossbar direction) Support rod diameter: 35/1.7 mm S355JR TS anti-slip: no QS anti-slip: no Edging: T-profile 35 mm Mesh size: 90 x 50 mm Weight: approx. 9.35 kg | Pcs. Internal designation: R

Perkin Elmer PinAAcle 900 F Flame AAS Perkin Elmer AAS PinAACle 900F F Flame AAS True double beam, 8 –lamp mount, Fibre Optic light path automated flame and burner optimization PC and Perkin Elmer WinLab Software Lamps on request Last Service 07/2022 with warranty

Note: This is a second choice product, new unused. II. Option means there may be dust deposits, minimal scratches or dirt may be present. Technical data for the rack beam: Manufacturer: SSI Schaefer Shelf system: R 3000 Type: KTRZ 31036 The scope of delivery includes: 01x Shelf truss, second choice (new) Material color: sendzimir galvanized Z-profile: 60 x 40 x 12 mm clear width: approx. 994 mm Perforated pattern: approx. 53 mm Agraffe: 3 HK (hook) Weight | pcs.: 1,700 kg max. load per pair of trusses 300 kg at the same. distributed load Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope o ...

Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS -Number: 55x Profibus plugs available -Price: per piece -Weight: 0.04 kg/piece

Knife 320 mm 3-HOLE, ART. NO. 94001000002 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

Knife 330 mm 4-HOLE for BIZERBA VS8/SE8/VF330/A400 - ART. NO. 94001000014 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

Clamping plate, welding table, welding table, straightening plate -Width: 995 mm -Length: 1000 mm -Height: 800 mm -with supporting ribs -Weight: 170 kg

Three-phase motor, electric motor -Power: 1.1 kW -Speed: 1410 rpm -Shaft: Ø 22 x 50 mm -Design: B5 -Protection class: IP 44 -Quantity: 2 available -Price: per piece -Dimensions: 320/198/H220 mm -Weight: 12 kg

Heat-Recovery system (storage tank 1000ltr with internal heat exchanger) -for drinking water -function Qü = ca. 7 kW (inox-screw-heat exchanger-activity 7 kW) - refrigerant- access/discharge 77°C / 50°C - drinking water- access/discharge 40°C / 50°C (complete from 10°C to 50°C- at small drinking water-need is the gotten energy automatic for heating transfer) -for heating-function Qc = 31 kW + 9 kW =40kW Energy buffer storage 1000/800 volume: 1.000 ltr diameter: 800 mm diameter with insulation: 960 mm storage height: 2.290 mm total height: 2.590 mm

gear motor, electric motor, three-phase motor, electric gear motor -Speed: 64 rpm -Power: 1.5 kW -Design: B5 angle -Hollow shaft: Ø 40 mm -Protection class: IP 55 -Recess: Ø 180 mm -Flange: Ø 250 mm -Quantity: 1 piece available -Dimensions: 565/203/H280 mm -Weight: 53 kg

Garvens Automation continuous weighing scale 1600-1150-950 RA1975 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Manufacturer: Garvens Automation Type: SL 100 ID1 Year of construction: 1996 Machine type: automatic checkweigher Total size: approx. 1600 x 1150 x 550 mm (WxDxH) Electrical connection (Plug and Play) Nominal voltage: 380V and 220V Nominal frequency: 50Hz / 60Hz (+/-2 %) Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g Conveyor belt 1600-1150-950 and SEW gear motor with frequency converter Conveying length (FL): 1600 mm effective width (NUB): 1150 mm belt width (GB): 950 mm Motor Type: SEW Gearmotor with frequency converter Motor Power: kW 0.55/0.55 Speed: 0,02-1,2 m/s Feat ...

Lippert Rising falling Incline belt conveyor GF 7000-900-800 RA2055 Technical data: Conveyor length (NL): 7000 mm (4960 mm + 700 mm + 1340 mm) frame width (NB): 900 mm belt width (GuB): 800 mm Overall height (BH): 120 mm, 430 mm with motor Angle: about 15° ( 2 x 7,5° ) Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 7000 Nominal / outside width in mm: 900 Belt width in mm: 800 Driven: YES Engine ...

Lippert belt conveyor GF 3150-900-700 RA2113 Technical data: Conveyor length (NL): 3150 mm frame width (NB): 900 mm belt width (GuB): 700 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 3150 Nominal / outside width in mm: 900 Belt width in mm: 700 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m /  ...

Lippert belt conveyor flap belt GF 970-650-500 RA1465 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 970 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-8E Year of construc ...

Preamplifier, laser -Name: Preamplifier W979 -P0979-200-00002 -Number: 2x available -Price: per piece -Dimensions: 20/20/H60 mm -Weight: 40 g

Data sheet of retrofit POS. GE 11.70 Gebhardt 5.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Belt length: 900 mm Length of main conveyor: 5,549 mm (incl. upper bow piece) Length upper bow piece: 613 mm Total width: 610 mm Belt width: 500 mm Belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 650 mm H 2 above 2,300 mm Difference in altitude: + 1,650 mm, trail/slope 19° or 34% Support: Please ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Features: Construction year: 2007 condition: very good (used) Conveying length in mm: 6449 ...

Data sheet of retrofit POS. GE 22.10 Gebhardt 7.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 7.449 mm (incl. upper bow piece + straight piece) Upper bow piece length: 392 mm Upper straight piece length: 3,830 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 1700 mm H 2 above 2,800 mm Difference in altitude: + 1.100 mm, trail/slope 19° or 34% Support: ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Features: Construction  ...

Gebhardt Belt conveyor system 5549-610-500 with pre-flow belt 900-610-500 RA1005 The belt conveyor system from Gebhardt is from 2007 and is in a very good (used) condition. It has an engine of the brand SEW. The system can be used in up-and-down operation. Inclination angles are adjustable as desired, upper arc and supports can be adjusted. Columns are not included in the scope of delivery. These are optionally available. Consisting of: 1 x pre-flowstrip, 1 x main band, 1 x sheet piece Technical data: Manufacturer: Gebhardt Type: 300.10 Position: GE 12.20 Built: 2007 Condition: very good (used) Engine: fully functional Length main band: 5549 mm (incl. top bow) Nominal/outer width (NB): 610mm Belt width (GB): 500 mm Webbing: slightly structured Length pre-flow belt: 900 mm Length of sheet: 613 mm Webbing: smooth Heights OK Strap: H 1 bottom + 650 mm H 2 top 2,300 mm Height differenc ...

Data sheet of retrofit POS. GE 12.05 Gebhardt 7.7 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 7,733 mm (incl. upper bow piece + straight piece) Upper bow piece length: 375 mm Upper straight piece length: 1,293 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 2,300 mm H 2 above 4,320 mm Difference in altitude: + 2,020 mm, trail/slope 19° or 34% Support: ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Features: Construction ...

Electric motor, three-phase motor -Power: 1.1 kW -Speed: 1380 rpm -Shaft diameter: 24 mm -Construction: B3 -Protection class: - -Price: per piece -Number: 1x available -Dimensions: 300/240/H180 mm -Weight: 19.8 kg

Dematic belt conveyor 9824-500/400 Dropping conveyor with Center drive Built in 2008 Length incl. task band: 9,824 mm Width: 500 mm Belt width: 400 mm Elbows + backward belt nubbed belt Habasit Belt conveyor straight length: 2,507 mm Bow piece 1: 632 mm Backward belt length: 5.851 mm Submission belt smooth belt length: 733 mm, with exaggerated rubberized drive drum Drive: SEW 400 V, 0.75 kW 2.1 A RPM 13000, number of drive shaft RPM 68 Speed v = 0, 35m / sec. and 21 m / min. If necessary optional: 5 units, high-demand support Features: Construction year: 2008 condition: very good (used) Conveying length in mm: 9827 Nominal / outside width in mm: 500 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,75/S1 Ampere: 2,10 Conveyor speed m / s: 0,35 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach m ...

Lippert belt conveyor GF 6870-900-800 RA2106 Technical data: Conveyor length (NL): 6870 mm frame width (NB): 900 mm belt width (GuB): 800 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 7000 Nominal / outside width in mm: 900 Belt width in mm: 700 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m /  ...

Transnorm Rising falling Incline belt conveyor GF 9820-700-600 RA2087 Technical data: Conveyor length (NL): 9820 mm (6000 mm riser segment + 3820 mm forerun) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DRS71M4BE1/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 9820 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eu ...

Lippert belt conveyor GF 22500-900-700 RA2085 Technical data: Conveyor length (NL): 22500 mm frame width (NB): 900 mm belt width (GuB): 700 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 22500 Nominal / outside width in mm: 900 Belt width in mm: 700 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m ...

Lippert belt conveyor GF 950-650-500 RA1409 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 950 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm Support feet optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB-5E Year of construction: 2001 ...