tba 9 200 used for sale

Laserset for ProSet9400 - see all details in the picture. The Lasers are out of a well working ProSet. Available: on stock

Flat discs 900 mm

Container filling system Turret with horizontal Rotary and longitudinal moving conveyor on sturdy galvanized frame, swivel bearings. Incl. support climbing belt and tied up to the automatic filling of three large containers. PLC control Distribution belt gear motor 2 .2kW / conveyor width 900 mm Achabstand 5500 mm Drive rotation 0, 6kW Rotation drive +/-90 ° Climbing belt conveyor width 600 mm / distance 4000 mm / drive 1, 1kW High belt conveyors conveyor width 600 mm / distance 4700 mm / drive 1, 1kW Colour RAL 9006 / White aluminium System now available Price and further details on request

Koppens breading machine Belt width: 600mm Power: 0.12 kW

HT Water pump,Type WD-90L240 Kolmeks WD90L240 Part number: 191001

Make: HIROSS Type: SLO920D02200X Power: 95 kW refrigerant: R407C 2 pcs. compressor Maneurop Compressor type: SZ175S4RA Price on request

LeFort 900 year of manufacture/production year: unknown/unknown. Drive/drive: 22 KW length of knife / blade lenght: 900 mm width at the tip / blade tip to tip: 340 mm hydraulic hold-down/hydraulic hold down overhauled/recondition

Carestream Direktview CR 950 with: 2x Control panel 25 cassettes: 18x24-8 pcs. 24x30-5 pcs. 35x43-12 pcs. complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before plac ...

Balpe SAS model: 9PL/20 serial: 88 Stainless, 9 electrically heated angled plate with, 200mm diameter, adjustable temperature.

MASSON MARINE GEARBOX RSD 201 / 3.978:1

McIntyre 900 Diesel Shear A reliable workhorse equipped with 920mm (36.25") blades to allow you to handle larger pieces of material with ease All round yard shear Designed to give maximum possible blade length without losing cutting capacity, the 900 shear is perfect for a wide variety of yard uses in particular the handling of larger pieces of non ferrous scrap. The 900 can be operated via a foot pedal for more accurate control, or can be set to work continuously to enhance processing speed. The machine is built to last using top quality components and is equipped with a heavy duty guard to improve operator safety.

AEG adjustable, vibrating feeder Lxw = 900x500mm Capaciteit 50 m3/h Adjustable from 0% to 100% With magnetic vibrator AEG MV 100/50 380Volt 9Amp 50 Hz And new thyristor control.

McIntyre 900 Shear A reliable workhorse equipped with 920mm (36.25") blades to allow you to handle larger pieces of material with ease All round yard shear Designed to give maximum possible blade length without losing cutting capacity, the 900 shear is perfect for a wide variety of yard uses, in particular the handling of larger pieces of non-ferrous scrap. The 900 can be fitted with solenoid control allowing it to be coupled to infeed or outfeed conveyors. Other optional equipment for the 900 shears includes oil-immersed tank heaters, forced air cooling and infeed table to handle oversized material

Edge press of PanHans 923 with preheating ruler Working length 250 cm maximum 80 mm thick L x W x H: 300 x 60 x 100 cm Weight approx. 300 kg Built in 1976 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

NEMESIS 9000 are high-quality, modern, by INNOVATEST developed and produced hardness tester. These versatile machines combine groundbreaking technologies and extensive facilities in a machine body with a modern design. The basic function of the hardness concept is based on a settled on the test piece nose cone's mounted a turret with up to 8 positions. The desired hardness test method can be choiceed conveniently on the large touch screen monitor by means of Visual, intuitive user interface (control and evaluation software IMPRESSIONS. Now, the operator presses START and starts the automated testing: -automatically the turret swivels the correct Indentor / lens -using search drive, the specimen surface is contacted and focused (Vickers / Brinell) -now the impression generated power-regulated -then the integrated image analysis software automatically evaluates the impression of h ...

Motor for Mercedes building model OM 447984-00 Refurbished engine cpl. with fuel injection system, nozzle, water pump, turbocharger, air compressor without starter, alternator and clutch Warranty: 1 year, without KM-limit Identical old part must be returned freight costs: by arrangement

Ruhle Miknetum MGR 900, newest generation of Tumbler, with vacuum, mixing arm, container size 900 liters, filling size 675 Liters, intelligent touch-PC control, direct cooling by strong cooling unit, mixing and kneading , up to 25 rounds per minute, all stainless steel, loading device, comfortable emptying of the goods by standard carriage size You are very welcome to test the machine in our facility in Koblenz, Germany.

Engine number: 6 902 653 Power: 23 kW Speed: 1500 1/min overhauled, no generator, no starter motor Price Excl. VAT, subject to prior sale Photos on demand

Table size: 550 x 950 mm traverse path x/y/z: 850/550/550 mm spindle retainer: BT 40 ISA kl. / gr. Table/spindle distance: 100/650 mm spindle speed: 8000 rpm number of tool stations: 24 pièces feeds: x/y 5-10000 / z 5-12000 mm / min rapid traverse: x/y 24 / z 20 m / min spindle drive: 11/15 kW Electr. Supply: 400 V, approx. 20 kVA kW space requirement: 2600 x 2220 x 2700 mm weight: 5200 kg

Engine number: 7 805 371 Power: 39 kW Speed: 1500 1/min overhauled, no generator, no starter motor Price Excl. VAT, subject to prior sale Photos on demand

We offer you here a used workbench of the manufacturer Jung Heinrich for sale. Workbench depth: 600 mm Technical data for the workbench: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material color: orange Box profile: 85 x 40 mm clear width: 2,775 mm 04x locking pins, used Version: completely galvanized 06x drill screws, new Version: galvanized Dimensions: 6.3 x 70 mm 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,950 mm Depth chipboard: 600 mm Chipboard if necessary two-part The images serve  ...

Engine number: 017 5 241 Power: 57 kW Speed: 1500 1/min overhauled, no generator, no starter motor Price Excl. VAT, subject to prior sale Photos on demand

We offer you here a used workbench frame of the manufacturer Jung Heinrich for sale. Workbench depth: 600 mm Technical data on the workbench frame: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material color: orange Box profile: 85 x 40 mm clear width: 2,775 mm 04x locking pins, used Version: completely galvanized The images serve to illustrate the material. The material color may differ if necessary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 workin ...

Lombardini 9LD625 / 2, 2 cyl. air-cooled diesel engine, displacement 1250 cm, approximately 19.1 kw / 26 PS 3,000 1/min. More diesel engines: 1-6 cylinder, various products: Deutz, Daedong, Hatz, Hinomoto, Iseki, Isuzu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Capacity of 4,5-100 kw, used partly as new. Gasoline engines: 1-2 cylinder 3-15 kw B & S, Honda, Kohler, Robin, Wisconsin. Various cooler, starter, alternators, and mufflers in stock, various hydraulic pumps and hydraulic motors.

We offer you here a used workbench frame of the manufacturer Jung Heinrich for sale. Workbench depth: 1,000 mm Technical data on the workbench frame: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material color: orange Box profile: 85 x 40 mm clear width: 2,775 mm 04x locking pins, used Version: completely galvanized The images serve to illustrate the material. The material color may differ if necessary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5  ...

LIUGONG 9035 E

Engine number: 6 567 130 Output: 44 kW Speed: 1500 1/min overhauled, no generator, no starter motor Price Excl. VAT, subject to prior sale Photos on request

1 STERLING STERLCO used diathermic oil boiler with electric heating type S-9026-J0 serial nr. 95E5517 Dual zone Heating Capacity Zone 1: 18 KW Heating Capacity Zone 2: 36 KW Total Heating Capacity: 54 KW Pump Motor (Zone 1): 1.5 KW / 2 HP Pump Motor (Zone 2): 1.5 KW / 2 HP complete with circulation pumps and high accurency temperature controlers 1" oil circulation pipes (up to 110 L/min) 1" vent pipes (up to 110 L/min)

all stainless steel belt width 900 mm mobile mesh width 5 mm adjustable speed with batter pump (2 pieces) outfeed belt outside dimensions (l x w x h) : ± 2.600 x 1.300 x 1.700 mm

Cat No. 17-00156 in a very good condition Agitator TMR Type: SK 9042AF-132 M/4 TF TMR Turbo Misch Typ: SK 9042AF-132 M/4 TF I = 23.23 / H6 N1/n2 = 53 1/min Motordata: Type: SK 132M/4 50 Hz; 400 / 690 V; 14,8 /8,55 A; 7,5 kW ; 1445 1/min Measurements: Height: 2250 mm Width: 450 mm Length: 950 mm Length of the large wing: 540 mm Length of the smaller wing: 350 mm Weight: 600 kg available: 3 The price is for one unit.

3 feeders 1 folding station adressing unit Sitma 950 foil wrapping machine infeed to the stacker with reject unit stacker belt delivery ; working condition

Qty 1 x Carter MK3+ Banbury internal mixer,  chamber volume 90L,  batch weight approx 85kg,  2 wing tangential rotors,  drilled sides, roller bearings,  hydraulic drop door with linear actuator and spade latch.  F type dust seals.  With 325kw, 1070rpm, 715A, DC variable speed motor and controls.  Pneumatic hopper.  Complete with hydraulic unit, lubrication unit etc and in good condition (previously used for mixing coloured compounds). 

Skjold stone mill type H-950/I Nr. 976918, 15 kw up to 1500 rpm, stone diameter 950 mm, technically fully repaired and repainted.

Pump Allweiler SNEF120ER46D6.9W61-BGOR - see picture Next: ALWEILER pump with tank Diverse pumps ALLWEILER - for cooling etc., approx. 40 bar (see picture)

Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 800 mm We offer you here a used workbench of the manufacturer Jung Heinrich for sale. Included in delivery are: 02x workbench stand, used Material color: blue Frame profile: 76.2 - 100 mm Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: orange Box profile: 85 x 40 mm Traverse type: GN85x41mm Clear width: 2,775 mm 08x safety pins, used Version: completely galvanized 01x Chipboard II. Choice, used Thickness chipboard: 38 - 46 mm Width chipboard: 2,980 mm Depth chipboard: 800 mm Surface: coated if necessary (possibly two-part) 01x Chipboard II. Choice, used Thickness chipboard: 38 - 46 mm Width chipboard: 2,755 mm Depth chipboard: 800 mm Surface: coate ...

Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 1,000 mm We offer you here a used workbench of the manufacturer Jung Heinrich for sale. Included in delivery are: 02x workbench stand, used Material color: blue Frame profile: 76.2 - 100 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: orange Box profile: 85 x 40 mm Traverse type: GN85x41mm Clear width: 2,775 mm 08x safety pins, used Version: completely galvanized 01x Chipboard II. Choice, used Thickness chipboard: 38 - 46 mm Width chipboard: 2,980 mm Depth chipboard: 1,000 mm Surface: coated if necessary (possibly two-part) 01x Chipboard II. Choice, used Thickness chipboard: 38 - 46 mm Width chipboard: 2,755 mm Depth chipboard: 1,000 mm Surfac ...

For sale: Used parts from spindle mower Agria 9300, also dieselengine Kubota V 1200 Other parts of / for reel mowers available to some types of Jacobsen, Ransomes and Sabo. Also complete spindle mower units, cutting moves, pull mowers, self-propelled mower. - JODAU environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...

Vibro screening machine Allgaier type D 950/I Upgrade to Type 950/II Two Vibromotors 0.5 kw Second screen deck, screen elevation 100 mm stainless steel New wire sieve

Detector detector metaldetector metal EZ-TEC type 9000 RD Voltage: 230/240V AC Amperage 315mA 1 used and 1 new

all stainless steel belt width 900 mm mobile adjustable speed adjustable working height with outfeed conveyor dimensions (l x w x h) : ± 4.400 x 1.700 x 2.200 mm