tba 9 200 used for sale

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -1 piece: pull-down jaw -Interior dimensions: 140/160 mm -Groove width: 8 mm -Dimensions: 200/30/H100 mm -Weight: 3.2 kg

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 200/111 mm -Height: 18 mm -Hole circle: Ø 152/8 mm -Delivery of: steel/stainless steel cover plates possible -Number: 13x pillows available -Price: per piece -Weight: 0.4 kg/piece

three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Handover: as is -Chuck size: Ø 200 mm -Bolt circle: Ø 134 mm -Weight: 20.7 kg

Metronic Romex RFD 2000/4 Type: Stack Material: 20-250my all common materials printable Inking units: 4 Printing ink: Fuel or watercolor Cylinder circumference: from 250mm- 510 mm Cliché thickness: 2.84mm /1.14mm Inking units with doctor blade chambers Material width: 520 Print width: 520 Winder: pneumatic unwinding Dryer: Hot air Side edge controls: 2x BST Railway observation: BST Inline Corona 4,5KW SOFTAL Explosion protection

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 200 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Max. Pressure: 10 bar -Price: per piece -Number: 2 pieces -Dimension: Ø 38 x 368 mm -Weight: 0.8 kg/piece

sheet width: 2000 mm plate thickness: 20 mm pre-bending: 15/11 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m with initial rounding Technische Daten:/ technical details Biegelänge / bending lenght 2000 mm max. Blechstärke / max. sheet thickness 20 mm Anbiegeleistung / initial rounding 15/11 mm Walzendurchmesser Unterwalzen / roll diameter below rolls 280 mm Oberwalzendurchmesser / diameter of the upper roll 300 mm Antriebsleistung Hauptantrieb / drive capacity main drive 16,2 kW Antriebsleistung Anstellantrieb Oberwalze / drive capacity upper roll 4,8 kW Antriebsleistung Anstellsntrien Unterwalze / drive capacity below roll 3,7 kW Gewicht ca. / weight ca. 14200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The d ...

Ball Mill Vollrath EFC 200 Wet and dry grinding Ferrous grinding with steatite balls Lining hard porcelain Capacity 200 l Drive power 1.4 kW Speed 42 1/min 3 ball mills each mounted on steel structure Very good operational condition, directly from production!

sheet width: 2020 mm plate thickness: 2 mm control: Beijer daylight upper clamping: 100 mm Bending angle: 0 - 135 ° upper clamping drive: 0,375 kW bend clamping drive: 1,125 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 3 x 1,1 x 1,75 m Foot switch with emergency stop: Segmented upper tool: Oil filling: exklusive Light barrier control: Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 200 mm -Piston diameter: 20 mm -Piston rod: 8 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 27 x 330 mm -Weight: 0.3 kg/piece

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -Weight: 18 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Recess: Ø 160 mm -Bolt circle: Ø 180 mm -Passage: Ø 55 mm -Weight: 14 kg

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 200 mm -Piston diameter: 80 mm -Piston rod: 25 mm -Dimensions: 420/95/H95 mm -Weight: 5.3 kg

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 200 mm -Piston diameter: 20 mm -Piston rod: 8 mm -Dimension: Ø 27 x 333 mm -Weight: 0.3 kg

The scope of delivery includes: 01x Shelf connector, used Material color: blue Manufacturer: Feralco for shelf spacing: approx. 200 mm Total length: approx. 200 mm Profile abm.: approx. 20 x 20 mm Headstock: approx. 100 x 40 x 4 mm Borehole Ø: approx. 9 mm (2 pcs per side) Weight: approx. 0.41 kg | Pcs.

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 200/111 mm -Height: 24 mm -Hole circle: Ø 152/8 mm -Delivery of: steel/stainless steel cover plates possible -Weight: 0.5 kg/piece

Arburg 520C-2000-800 (193) Description with conveyor belt, bimetallic screw General Information SKU: 193 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Injection weight: 434 g Clamping force: 2,000 kN Screw diameter: 55 mm Spray pressure: 1650 bar Tie bar spacing: 520x520 mm Clamping plate size: 728x728 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 80000 h Weight: 7300 kg Dimensions: 6x2 m Funnel: No Core train: Yes Euromap: Yes

Moving bezel, moving bezel, resting stick, lynette -Manufacturer: TOS for lathe type SUS80 -Max. Passage: Ø 200 mm -Plating: brass -Top height: 230 mm -Drawings for the photos -Quantity: 1 piece -Dimensions: 530/200/H740 mm -Weight: 100kg

turning diameter: 235 mm turning length: 200 mm turning speeds: 6500 U/min control: Siemens 840D swing diameter: mm turning height: mm workpiece height max.: 100 mm spindle bearing diameter: 90 mm spindle head: A5 total power requirement: 41 kW weight of the machine ca.: 6500 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boiler Lifting Tipper Kemper HK 200 R - Boiler tipper Kemper - Model: HK 200 R - for Kemper 150 AL boiler - with boiler drive and boiler shearer - Built in 2005 - Total height 312cm

Permanent magnet motor, electric motor, servo motor, spindle motor, permanent magnet three-phase servo motor, permanent magnet DC servo motor, DC spindle motor Manufacturer: Fanuc, DC Spindle Motor -Type: 3-S TG 6 -Shaft: Ø 42 x 110 mm -Dimensions: 830/220/H288 mm -Weight: 70 kg

MEMBRANE SKINNER, MAJA, MODEL: EVM 2000 Technical description: Serial number: 38280 Power supply: 380 V, 3 Ph, 50 Hz, 2.2 A, 0.75 kW Working widht: 420 mm Dimensions: 700 X 700 X 1000 mm

Slotting machine Elmass for wedge tracks from 2.5-14mm. Thanks to the bore-guided tool, even extra-long keyways can be pushed. Tools for standard holes of 6-50mm and groove widths of 2.5-14mm are available. Wedge tracks in blind holes are also possible. Multiple wedge tracks thanks to the 400mm rotary table are feasible.

Mazak Integrex 200 lll S + GL 150 F CNC turning-milling center with second spindle CNC control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 rpm X-axis travel: 580 mm Y-axis travel 160 mm Z-axis travel: 1045 mm B-axis travel: 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool cone Capto C6 Number of tools in the magazine 40 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

Technical data of Used Universal cylindrical grinding machines Cometa HSP 2000: Wheel diameter: 762 mm Max diameter working: 800 mm Center height: 410 mm Working lenght: 2000 mm Wheel power: 15 hP Weight: 11 ton

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 80 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 2 pieces -Dimensions: 225/46/H46 mm -Weight: 0.7 kg/piece

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 200 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Dimensions: 345/47/H47 mm -Weight: 1.0 kg

Long link roller chains, transport chain, roller chain, drive chain -Chain length: 10 m -Pitch: 200 mm -Intermediate dimension: 48 mm -Dimensions 1200/1000/100 mm -Weight: 176.5 kg

Lathe Manufacturer: Schaerer Model: UN 200 Center distance: 1600mm

Long link roller chains, transport chain, roller chain, drive chain -Chain length: 9600 mm -Pitch: 200 mm -Intermediate dimension: 48 mm -Dimensions: 1140/920/100 mm -Weight: 166.5 kg

Long link roller chains, transport chain, roller chain, drive chain -Chain length: 10.4 m -Pitch: 200 mm -Intermediate dimension: 48 mm -Price: per piece -Number: 2 pieces -Dimensions: 1140/960/100 mm -Weight: 180 kg/piece

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Short cone mount for: bayonet disc attachment -Cone size: 6 -Cone: Ø 106 mm -Bolt circle: Ø 133.4 mm -Through hole: Ø 54 mm -Weight: 15 kg

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 200/116 mm -Height: 58 mm -Number: 10x pillows available -Price: per piece -Weight: 3.4 kg/piece

Dough filling and dosing machine Rheon KN 200 Cornucopia used Rheon KN 200 dough filling and dosing machine.The machine has been tested for function, can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. - Dough pieces: 10-300 gr. - Output : 10-60 pieces/min -digital control - Stainless steel cladding - rollable on wheels - used Rheon KN 200 for bakery confectionery

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 200/125 mm -Height: 58 mm -Number: 9x pillows available -Price: per piece -Weight: 2.9 kg/piece

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 200/140 mm -Height: 58 mm -Number: 5x pillows available -Price: per piece -Weight: 2.6 kg/piece

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 200/114 mm -Height: 32 mm -Number: 4x pillows available -Price: per piece -Weight: 2.1 kg/piece

Year: 2011 Travel X-axis: 2032 mm Y-axis: 660 mm Z-axis: 610 mm Spindle speed: 12,000 rpm with internal cooling Power: 18 kW Tool holder: SK 40 40 tool slots Table load: 2,700 kg Machine weight: 18,000 kg Machine hours: 11,417 hrs. Spindle hours: approx. 5,000 hours (maximum) Spindle change in 2020 - Subject to technical errors and prior sale. -

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 200/136 mm -Height: 57 mm -Number: 7x pillows available -Price: per piece -Weight: 2.6 kg/piece

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 300/200 mm -Height: 60 mm -Weight: 6 kg

ESAB EAGLE 2000 plasma cutting machine was built in 2009 in Germany. The machine is designed for machining stainless steel, structural steel, low-alloy steel and aluminium with a maximum thickness of 30 mm and has a very stable and vibration-free welded construction. Excellent cutting precision with simultaneous low operating costs is ensured by the ESAB Precision Plasmarc 201 plasma source with a power of 200 A, which generates a narrow plasma beam with high energy density per small area of material. The plasma cutting machine portal was fixed by two dynamic servo drives operating with low backlash on the machined profile rails (X axis). The dynamic servo drive in the transverse carriage drives the spur gear, which then meshes with the toothed bar of the machine portal, causing transverse movement (Y axis). The plasma cutting machine is equipped with an ESAB CNC control with the late ...

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 200/142 mm -Height: 20 mm -Hole circle: Ø 171/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 192x pillows available -Price: per piece -Weight: 0.3 kg/piece

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Volvo Engine: TAD 733 GE Engine No.: 5312982207 Power: 201 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Leroy Somer Generator type: TAL044-M Gene. No.: 39664900008 Generator power: 200 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1.200 Height approx. mm: 2.295 Length app ...

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 200 mm -Hole circle: Ø 120/Ø 12 mm -Dimensions: Ø 200/H37 mm -Weight: 7.5 kg

Working width: 4000 mm Working height: 2600 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----------------------------- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center hole ...

ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...

Electronically controlled, programmable roller feed for advancing and precise positioning of strip material SIEMENS® PLC – Control Largest sheet strip width 200 mm (optionally up to 800 mm) Sheet thickness range 0.8 to 3 mm Steel sheet 400 N/mm² - (optional thicker sheets on request) Rollers Ø 95 mm Maximum practical feed rate in operation with eccentric presses: 120 strokes per minute with a maximum feed length of 80 mm per stroke

three-jaw chuck, three-jaw lathe chuck -Handover: in current condition as viewed -Short cone: has been shortened -Chuck size: Ø 200 mm -Through hole: Ø 54 mm -Hole: cone Ø 104.5 mm -as per pictures, without additional accessories -Weight 14.4 kg

Load capacity 2000 kg Length 24 m

Short-stroke cylinders, pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders - Stroke: 200 mm - Piston rod: O 20 mm -Dimensions: 265/108 / H112 mm mm -Weight: 4.3 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DNC-80-200-PPV-A -Piston: Ø 80 mm -Stroke: 200 mm -Max. Pressure: 12 bar -Dimensions: 420/95/H95 mm -Weight: 5 kg