129,254 used machines on RESALE, but how to find them? Machine Search
Table machine RMH 85 Q to peel by cable. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-85 mm
Synchronous motor, 1FT6082-8AF71-1AB1, Siemens, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used part! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. - Synchronous motor, permanent magnet motor, - max. 4400 rpm - max. 13 Nm - 16 kg Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and ...
RECON Part number: 0400 5187 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Size max 220 x 297 mm Speed max 2.700 c/h Equipment o automatic feeder o 2 cutting stations o 3 edge corner cutting station o delivery ; working condition
Thermotron Environmental Test Chamber Here we offer you a Thermotron environmental test chamber. Thermotron Environmental Test Chamber Water-cooled Working range volume: 227 litres Temperature uniformity: All models 0.7°C Temperature range: -70°C to + 180°C Temperature control tolerance: All models 0.3°C Shipping weight: approx. 400 kg Internal dimensions: width 610 mm x depth 610 mm x height 610 mm External dimensions width 890 mm x depth 1240 mm x height 1850 mm Humidity Range: All models 10% to 98% RH Humidity Control: All models 2.5% RH Heating capacity in minutes -65º to 71ºC: 17 Heating capacity in minutes -65º to 180ºC: 43 Heating capacity in minutes -40º to 85ºC: 16 Electrical requirements in full load amplifiers 230/3/60: 19 Electrical requirements in full load amplifiers 230/1/60: 25 Electrical requirements in full-load amp ...
RECON Part number: 0401 6678 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Capacity: 1,500 K/h Types of boxes: Boxes of 6, 0.7 VdF, 200 x 300 x 320 mm, transverse Boxes of 6, 1.0 VdF, 200 x 300 x 320 mm, transverse Boxes of 12, 0.7 VdF, 355 x 270 x 310 mm, longitudinal running Boxes of 24, 0.2 goiter neck KK, 300 x 400 x 210 mm, longitudinal run Boxes of 24, 0.2 goiter neck SV, 300 x 400 x 210 mm, longitudinal run The following evaluations are integrated: crate geometry, foreign bodies, crate color, bottle height, bottle color + Box pusher VT-1201 Year of construction: 2016 Capacity: 1,500 K/h Box types: Boxes of 6, 0.7 VdF, 200 x 300 x 320 mm, cross run 6-boxes, 1.0 VdF, 200 x 300 x 320 mm, cross run Boxes of 12, 0.7 VdF, 355 x 270 x 310 mm, lengthwise run 24-boxes, 0.2 Kropfhals KK, 300 x 400 x 210 mm, longitudinal barrel 24-boxes, 0.2 goitre neck SV, 300 x 400 x 210 mm, longitudinal run The following evaluations are integrated: crate geo ...
RECON Part number: 0215 4713 / 0215 5198 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
This sturdy workbench is perfect for do-it-yourselfers and professionals who need a sturdy work surface with storage space. The work surface consists of a 38 mm chipboard on which a high-quality edged flat sheet is placed, thus providing a solid foundation for any type of project. Under the work surface there is a shelf rack with 12 pull-outs (6 pull-outs per side), which offer plenty of storage space for tools, materials and accessories. The scope of delivery includes: 01x Workbench, used/ new System: SSI Schaefer Type: PR 600 Dimensions: approx. W 2,900 x D 800 x H 940 mm consisting of each: 02x Workbench stand, second choice (new) Material color: sendzimir galvanized Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 02x Workbench trusses, new Material color: blue Box profile ...
RECON Part number: 0215 4709 = 0215 5197 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Pelessierpresse Hanau, for pressing wagon wheels on axle, gemaess pictures
Workbench width: 1,170 mm / Height: 938 mm / Workbench depth: 800 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Frame profile: 85 mm Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x Workbench trusses, used Material color: yellow Box profile: 80 x 50 mm Clear width: 1,000 mm 08x locking pins, used Finish: completely galvanized 01x Chipboard of second choice, used Thickness chipboard: 38 mm Chipboard width: 1,170 mm Depth chipboard: 800 mm Surface: coated if necessary (possibly in two parts) 01x Chipboard of second choice, used Thickness chipboard: 38 mm Width chipboard: 980 mm Depth chipboard: 800 mm Surface: coated if necessary (possibly in two parts) 16x self-drilling screws, new Version: galvanized Dimensions: 6.3 x 70 mm
Stock# U2422-2 Used vertical stainless steel AISI 316L aseptic pressure storage tank with a total capacity of 830 l by Schwarte-Milfor Sp. z o. o. (Poland) type Mieszalnik procesowy. Tank has a working volume of 700 l and is designed to operate at pressures ranging from -1 to 4 bar and temperatures up to 150 C. The heating and cooling jacket made of stainless steel AISI 304 has a capacity of 152 l and is designed to operate at pressures ranging from -1 to 3 bar and temperature up to 150 C. The jacket is insulated with mineral wool and clad with AISI 304 stainless steel sheet. Internal dimensions: diameter 850 mm, length of straight wall line 1,200 mm. The tank has a welded dished top equipped with an inspection manway with an internal diameter of 450 mm and 9 stub pipes with mounted accessories. The tank has a welded dished bottom head equipped with a central outlet with a NovAseptic ...
Wire comb locking machine; good condition; suitable for division 3:1; Max. Binding width 457mm (A3+); Max. Staerke 12mm; with 2 large rolls of material in white and silver.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
SIMOTICS S synchronous servo motor + brake, 1FT6086-8AF71-4AH1, Siemens, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used part! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. - N=3.000/min, Nmax=4.400/min, - Mo=22,4/27 Nm, Mn=18,5Nm, - Brake 24V - Shaft diameter D32mm + key Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Al ...
43.5m aluminium profile at a sensational price €17/m excl., Nut 8mm, 40 x 80mm , used Special price! The current new price of a similar product would be € 38/m = total € 1,650. Take advantage of our one-off package price for 43.5m. If you have a VAT number, we will gladly issue an invoice without VAT. Used - Top condition The part was bought from a company in the course of a machine dismantling and is in very good condition. Scope of delivery: 3 x 221cm, 3 x 217cm, 9 x 200cm, 1 x 192cm, 2 x 184cm, 1 x 138cm, 1 x 129cm, 1 x 109cm, 1 x 105cm, 2 x 98cm, Attention: We also have a package of aluminium profiles 80 x 80mm and 40 x 40 mm. No warranty For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect cons ...
Checked and ready for use. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
Naehmaschine Brother Exedra E-100 Mark II, Foot Lifter FB II, MD-816B; You buy an industrial naehmaschien from Brother Naehmachine Brother Exedra E-100 Mark II, Foot Lifter FB II, MD-816B, DB2-B737-413 380V
Built in 2006 Speed bundles/min 40 Pakete/min Size packaged good width max 340 mm min 150 mm Size packaged good: height max 480 mm min 10 mm Size packaged good: length max 500 mm min 150 mm Size packaged good: diagonal max 600 mm Package weight: max 25 kg Electric supply: 400/50 V/Hz Speed: max ca. 24-55 m/min Weight: 150 kg (approx.) ; working condition
Dear's Sale, used 2 complete engine Deutz SBA8M528 Also, cover, piston, liner, conrod new/used, fuel pump, 8cyl std cranksaft etc any parts. Brgds Hakan KUSCU +905323642509
Emergency generator Equipment-No. 1000804494 Manufacturer: IVECO Type designation: 8361 SRJ 2605 Manufacturer part no.: 018262 Year of construction: 1993 Output AC voltage: 230V / 400V Type of installation: encapsulated Type of technique: water-cooled contractual. Power supply: 160 kVA Fuel capacity: 2,000 l Soundproofing cladding: 230 V / 400 V The unit is disassembled and prepared for transport. Price: € 11,500.00 (EUR) plus VAT ex Grunow (Brandenburg) Of course, shipping is possible. Shipping is subject to freight and packaging costs, depending on size and weight. (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, used Material colour: grey INP: 80 x 42 mm Truss type: TRV1-330-08-l Agraffe: 5 HK (hook) Clear width: 3,300 mm max. load per pair of trusses 1,400 kg, with the same weight Distributed Load 02x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.
Rated output at 50% ED: 80kVA Short circuit current: 35kA Electrode force: 100-600daN / easy lift Projection: 350-650mm --- Welding control: MPS 10 (5 times, 8-program) --- Incl. additional options: -Flow switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock
Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, used Material colour: grey INP profile: 80 x 42 mm Truss type: TRV1-210-08-l Agraffe: 5 HK (hook) Clear width: 2,100 mm max. load per pair of trusses 2,400 kg, with the same weight. Distributed Load 02x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.
5 axis machininng center (milling/turning from bar) Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4)
Technical data for the workbench frame: Manufacturer: Stow Type: Pal Rack NS Basic dimensions: Width: 1,550 mm Depth: 800 mm Height: 900 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench trusses, used Material color: orange Box profile: 80 x 50 mm Clear width: 1,350 mm 08x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting The images serve to illustrate the material. The colour of the material may vary. - The workbench racks are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. General information about the product: This item is available f ...
Capacity , ton: 800 Stroke, mm: 320 Strokes/min: 20 Shut height, mm: 900 Bed to ram adjustment stroke, mm: 320 Bed dimensions, mm: 2500x1600 Main drive motor power, kW: 75 Overall dimensions, mm: 4220x3500x8356 Weight, ton: 96,6
Oil- steam jet pump similar to oil diffusion pump Manufacturer: Leybold - Heraeus Type: OB 8000B Condition: used, removed from running plant!
TO WHOM IT MAY CONCERN ; WE VE 2 PCS REBUILT COMPLETE BOSCH FUEL INJECTION PUMPS OF MERCEDES OM 424 LA AT OUR STOCK PUMPS ARE READY TOU USE . WE VE ALSO ADDATIONALY BELOW NEW SPARES FOR SAME ENGINE TYPE FULL 2 SETS FUEL PIPES 8 PCS COMPLETE INJECTORS 19 PCS BARREL AND PLUNGERS 1 FUEL PUMP GEAR AND FLANGE 48 PCS RECON COMPLETE INJECTORS HOLDERS 4 PCS PRE FUEL FEED PUMPS 1 PC OIL PUMP 2 PCS NEW WATER PUMPS 5 PCS REBUILT EXH GAZ TURBO CHARGERS K36-424 ETC ETC ETC ... IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US .
Oil injector similar to oil diffusion pump Manufacturer: Leybold - Heraeus Type: Whether 8000B Condition: used, expanded from a running system!
KitchenAid Stainless Steel Kitchen Island Stainless steel island kitchen element for cooking, rinsing, cooling and storage. Kitchen Studio Exhibit KitchenAid KDIX 8810 Integrated Sink with Dishwasher KitchenAid KRDD 9010 Built-in Refrigerator with Drawers Cut-out for cooking island with downdraft fan Damixa Sink Faucet Substructure fields for additional equipment Large drawers with plenty of storage space for utensils KitchenAid KDIX 8810 Dishwasher The dishwasher is integrated into the sink and can be conveniently filled from above. Brand: KitchenAid Model No.: KDIX 8810 Number of covers: 5 Washing programs: 5 Quick rinse program: 1 Dish diameter: max. 29 cm Plus X Award The KDIX 8810 in-sink™ dishwasher received the award in the ease of use category KitchenAid KRDD 9010 Built-in Refrigerator Brand: KitchenAid Model No.: KRDD 9010 EAN: 8 ...
used
Qty. 1 Second-hand aluminium foil rolling mill line Mfc.: Kyongil Machinery Built: 2003 Stopped: 2015 Type: 4-Hi Strip width: 850 mm Thickness Entry: 0.3 mm Exit: 12 microns Consist of: Foil rolling mill Foil separator Doubler Annealing furnace
A used fan is sold: Rippert RV80 - 800-765-B5 Year 2007 (2017 overhauled) 27000m ³/h Booster 1262PA
Tennant 8210 Diesel Vacuum Sweeper & Scrubber Dryer Combination of vacuum sweeper and wet scrubbing machine with Kubota diesel engine, High container emptying, infinitely variable hydrostatic drive, automatic functions. 2 machines available, operating hours approx. 220 and approx. 1020. Other sweepers and accessories available, information, photos and offer on request! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping and disposal, environmental care, engines and more...
Description BINDER dosing machine is designed for dosing of liquid and pasty products to finished bags. Dosing machine automatically opens and fills the bag. Specification: Brand: BINDER Model: 871/1 Type: Filling Machine Size: 2200 x 1600 x 1300 (mm) Power supply: 400V 50 Hz 3N Power: 4kW Tank capacity: 75 l Tank pressure: 4 bar Max. temperature: 120 ° C Control: SIEMENS Control Panel Material: stainless steel/steel
Valve Islands Manufacturer: Festo Type: VIFB-06-D-1, TN 18 810 1 x INTERBUS-S modules indent.: 5 4 x LR CP A/B-D-1 11 x J-5/2-D-1 C. 22 x MNDH-3-1.4 External dimensions: width x length x height (approx. 73 x 23 x 8,5 cm) All information without guarantee
Combination of suction Sweeper and wet scrubbing machine with 4 cyl. Kubota diesel engine, infinitely variable hydrostatic travel drive, automatic functions. Max working width 1270 mm, high emptying. Solid technology from a brand manufacturer, ideal for indoor and outdoor areas! 2 x available: Year 2006 / 220 h and year 2005 / 1020 h More Sweepers on stock - information, photos and special offers on request!
used
Qty. 1 Second-hand Powder coil coating line on aluminium strip 1500 mm wide Mfc.: TBA Built: 1991 Coating thickness: 60 microns Revamped by OTEFAL in 2003 Powder booth changed in 2011 – GEMA Coil coater for the pre-treatment changed in 2013 Degreasing section re-built in 2010 – OTEFAL Electrical device changed in 2006 Strip width: 800 - 1500 mm Strip thickness: 0.8 – 2.0 mm A wide range of colors - over 300 different shades Capacity: 9000 tons/year in 3 shifts work 5/7 Days so 2 000 000 m² Spool dia.: 508 or 610 mm Outside coil dia.: 1500 mm Average speed: 7.5 m/min.
Many thanks for your interest on our second hand machines, please find follow our offer: Kreuter enrober manufacturer: Kreuter Type: Chocomat K 805 enrober electrical: 400 VAC / 3 Ph Year of manufacturing: 1989 work width: 805 mm Details: Anti-tailing device / Bottom enrobing device / Air blower We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau, (EXW)unpacked
Stock# U2441-1 Used stainless steel pilot plant belt dryer by Neuweiler AG (CH). Dryer has a belt designed in stainless steel net, with total width 300 mm, working width 250 mm. Total length of belt about 830 cm. At the feeding section there is a rotating turbine with adjustable rotation and height, for proper positioning the product on the belt. Turbine is driven by el motor 0.18 kW. Drying chamber has insulated walls and has working length 207 cm. Belt is driven by reducer and el motor 0,55 kW, 1380 rpm, 230/400 V, 50 Hz. Working speed of belt is adjustable. Dryer is equipped with stainless steel main air blower driven by el. motor 11 kW. Air is transfered via chamber with electric heaters and is blowing on the belt from the top. There is also exhaust fan. Dryer has electric cabinet and local control panel. All is mounted on stainless steel frame with 6 legs.
Used vibration ito Virto-Cuccolini VPB 800 1/X. Year of construction 2023. Sieve for food powders and granules. Construction: - Parts in contact with the product made of AISI 304 acid-resistant steel - Other parts made of galvanised plain steel - Cover with D200 inlet, D200 inspection and D100 vent; complete with clamping ring and silicone V-gasket - Sieve deck H=118 mm with mesh support ring, with outlet D150; Silicone gaskets - Mesh wire diameter 0.16 mm, height 2850 mm, hole 0.25 mm in AISI 304 - Mesh support ring for size 800 tensioned in AISI 304 satin finish (fin. 3). Tension rings included. - Mesh opening 0.397 MM - AISI 304 - Sieve bottom with outlet D116 - 0.73 kW, 230/400 V 50 Hz, 4-pole vibration motor - Installed on the flange spring holder and on the 3-wheel trolley made of acid-resistant steel - Control panel ON/OFF - Sieve complete with Atex components and ce ...
HELPMAN HTC 091.254-850 Product number: M18-3183 Cooling power: 1099 kW Number of fans: 10 Refrigerant: Freon Rated voltage: 400 Volt Size: 9400 x 2450 x 1300 mm Weight: 3035 kg Year of construction: 2005 Units in stock: 1 piece (s) Price: request a quote Well maintained Helpman condenser with 10 fans (850/610 RPM). Capacity listed at 15 k and an ambient temperature of + 25 ° c. Visit our website: used-refrigeration
Dough rounder Dough rounders are devices that are used to shape the dough They are used in the bakery and confectionery industry They can be banded and spiral The spiral rounder uses a spiral to shape the dough The machine shapes the dough thanks to the aluminum cone and aluminum sleeves around which it spirals The dough that comes from the dough compartment falls into the aluminum inlet groove All surfaces over which the dough moves are coated with Teflon Thanks to the system with flour and optional blowing of hot or cold air on the grooves, the dough does not stick to the drum Working range: 100 - 800 gr Dimensions: 950 x 950 x 1520 mm Weight: 175kg Electrical power: 1.1kW
maximum number of results exceeded
please refine your search
