127,865 used machines on RESALE, but how to find them? Machine Search
screw size: 133 mm injection shot weight in Polysterol: 5940 g/PS closing pressure: 8000 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Marel / AEW Delford weigh price labeler Model: 8160 Serial: 82012 2008, Stainless weigh price labeler, min weight 1.5kg - max weight 20kg, scale interval 1/2g, Max tare weight -1Kg, overall length 2750mm, belt width 200mm, weigh platform 200mm x 240mm, with spares and manuals, 1Ph
Length: 800 mm measuring range X-axis: 520 mm Table dimensions: 700 mm weight: 900 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1000x3000x2200 mm Weight: 450 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2500x730x1280 mm Weight: 550 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2200x1340x1050 mm Weight: 640 kg Total power requirement: 1,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 800/400 kg stroke: 6/12 mm stroke speed: 5/8 m/min output: 1,25 kw connected load frequency: 230 V weight: 21 kg dimensions: 420 x 180 x 280 mm Due to the low installation height, the maximum lifting height remains available. Control with emergency stop. (required by law) Suspension with safety hook. Overload protection with slip clutch. Built-in limit switch. Collection bag for chain. Control console with 1.6 m cable. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 2500 kg fork length: 800 mm stroke height: min 85, max 200 mm : 155 mm length in width: 540 mm number of wheels: 2 vorne, 2 hinten tire equipment: PU/Pu fork arm (length x width x thickness): 800 x 155 x 50 mm weight of the machine ca.: 0,059 t dimensions: 1,15 x 0,54 x 1,21 m SPECIAL PRICE ! - metered lowering of heavy loads - low maintenance hydraulic unit in steel version - Rounded fork tips for more safety when entering the pallet - Hard chromed piston rod and overload valve - Steering and load rollers ball bearings, for easy running even under load The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1020 mm plate thickness: 3,5 mm roll diameter: 90 mm total power requirement: 0,75 kW weight of the machine ca.: 310 kg Electric 380 Volt: Foot switch: Symmetry roll arrangement. This machine is in the following sizes obtainable: worhing length from 1020 until 2520 mm, max. plate thickness ( 400 N/mm² ) from 1 until 8 mm. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1290 mm plate thickness: 5 mm pre-bending: ja roll diameter: 120 mm roll speed: 1 - 6 m/min total power requirement: 1,1 kW weight of the machine ca.: 825 kg Asymmetry roll arrangement, pre-bending ist possible. This new machine is in the following sizes obtainable: working length from 1040 until 2540 mm, max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm. We are distributor only for Germany. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Automatic Bundle Packing Machine Professional automatic packaging line from a renowned European manufacturer. Suitable for packaging food, technical articles, printing and paper products, household goods and toys as well as textiles, for example. The machine can be used in various industries, such as beverages, food, chemicals, wine and spirits, cosmetics, detergents, wood, textiles and graphics. It can pack various products such as glass and PET bottles, cans, cartons, trays, jars, cartons of various sizes. The film sealing machine has several monitoring sensors, light barriers or photocells to control the automatic process. User-friendly LCD control display with extensive functions and setting options such as automatic and set-up mode, 20 memory slots for different pack formats, piece counters, packaging performance calculation and communication functions. Technical data: -Maxi ...
used
turning diameter over bed: 1740 mm turning diameter over slide rest: 1300 mm turning length: 16000 mm turning speeds: 4-180 U/min Rapid travel: chip conveyor: digital readout: steady: total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0 bore depth: 10000 mm number of spindles: 0 Control: Siemens Simatic Touch SPS swing over bed: 1050 mm swing diameter over bed slide: 1600 mm boring diameter: 50 - 310 mm centre height: 800 mm speeds:: 2,5 - 400 total power requirement: 74 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Mini Excavator JCB-8008 Year 2022 std. 770 Top condition 13.6500 € Technical data: Manufacturer: JCB Model No.: 8008 Year of Make: 2022 Hours: 770 3-cylinder Perkins diesel engine 0.762 l displacement 9.5 kW (12.7 hp) max. motor power 950 KG Weight Constant Pump Hydraulics with Two Gear Pumps Hammer hydraulics incl. piping on the boom Swivel boom Swivel lock Acoustic warning devices Dozer blade Hydraulically adjustable undercarriage: 700 mm to 865 mm Equipment: TOPS protection bar, front-mounted, foldable 180 mm wide rubber tracks Plastic seat with high backrest German version Dipper stick: 887 mm Grease Chain Tensioner Work lights on the boom 1 backhoe bucket 300 mm 1 digging bucket 750 mm Sold under exclusion of any warranty. Prior sale
screw size: 98 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 8600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pulling capacity: 32 kN : 20 m : 16 mm winch traction in steel case, as good as new pulling power with lever pipe The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 4000 mm table width: 3000 mm table load: 60 t total power requirement: 14.3 kW weight of the machine ca.: 48.5 t dimensions of the machine ca.: m Brand: FX Type: 83.300/400 Used machine Digital readout: Heidenhain ND 780 Table length: 4.000 mm Table width: 3.000 mm Table load: 60 T Movement: 2.000 mm Width T-slots: 58 mm (M30) mm Feeding: 4 - 1.500 mm/min Rapid traverse: 4.000 mm/min Power: 14,3 kW Machine weight: 48.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lift system, Megamat FSE 7.1, approx. 6.91m high, min. 331kg / Shelf, Shelf: approx. 3.06m x 81cm – used - : Price ex location: 18.500.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Megamat Type: FSE 7.1 3060/816-6910 Device number: 500002536 Year of Make: 2008 Permissible total load capacity: 70,000kg Load capacity per tray: at least 331kg (possibly also 414kg or 536kg, depending on which type of tray is installed, unfortunately cannot be clarified in advance). Number of shelves: approx. 50 pieces Shelf size: 3060 x 816mm Device dimensions: Width: approx. must be submitted later (width should be approx. 3,450mm) Depth: approx. must be submitted later (depth should be approx. 3,200mm) Height: approx. 6.91m 3/N/PE 230/400V, nominal operating current 17.8A, fuse supply line: 25A Condition: good Available: from approx. End o ...
cutting diameter: 810 mm saw band length: 8200 mm cutting width: mm Control: total power requirement: 4 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 4020 x1630 x 2570 mm Brand: BMSY Type: 810 CGH Year of make: 2019 Capacity round 45º: 555 mm ø Capacity round 60º: 320 mm ø Capacity round 90º: 810 mm ø Capacity square 45º: 700 mm Capacity square 60º: 310 mm Capacity square 90º: 770 mm Capacity rectangular 45º: 555 x 770 mm Capacity rectangular 60º: 310 x 770 mm Capacity rectangular 90º: 810 x 770 mm Mitre: 60 ° Saw blade dimension: 8.200 x 41 x 1,3 mm Saw speed: 20 - 100 m/min Saw motor: 4 kW Machine dimensions (lxwxh): 4.020 x 1.630 x 2.570 mm Machine weight: 3.970 kg Cap. 30 ° round: 700 mm ø Cap. 30 ° straight: 700 x 770 mm Cap. 30 ° square: 700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
aschinella details Warehouse number 1105-03398 Machine type machining center - Universal HERMLE brand Type C 800 P Year of construction 1999 Control type CNC Control HEIDENHAIN TNC 430 0 Storage location HAGUENAU Country of origin Germany Delivery time by arrangement Freight base from location Price Technical details x-displacement 800 mm y-way 500 mm z-way 500 mm Control HEIDENHAIN TNC 430 0 Spindle diameter 70 mm Spindle speeds 20 -15,000 rpm Spindle holder ISO 40 0 Tool changing device 30-fold 0 Workpiece weight 250 kg Chip conveyor yes 0 Total power requirement 0 kW Machine weight approx. 8.5 t Space requirement approx. 3,260 x 2,210 x 2,930 m Information WITH CONTROL HEIDENHAIN TNC 430 SPARNEFOERDERER TABLE 850 X 500 2 MALL PALLET CHANGER 180°
BÜHLER MPAD 814 Plansifter Power 3 kw Pendulum shaft drive, flat belt approx. 80 replacement screens (9 x new) good, ready-to-use condition
Availability: immediately Location: near Dresden Fondant system ZM 800 mm working width 1 piece of fondant glazing system (temperature control to + 38°C) - Working width approx. 800mm - Overall length approx. 2000mm - Working height approx. 870mm +/- 50mm with stainless steel swivel brake castors - Stainless steel frame construction in stainless steel 1.4301 – glass bead blasted - Conical drip plates – return glazing tray - Round cord belt transport 2-part with belt stripping in the return - Drive deflection shafts stainless steel 1.4301 with driven transfer shaft - Drive station SEW (7-20m/min.) - Stainless steel chassis with built-up glaze tray approx. 80 lt. Double-walled version with water filling and electric resistance heating. (Tempering to approx. 38º C). Level query with acoustic signaling. - Product delivery via OMAC rotary lobe pump - Built-in baffle box ...
The Benhil Microfix rationalises the processing and packaging of cold store butter. The machine reduces the time it takes to defrost butter, it improves the quality of the butter by creating the finest water dispersion and improves the spreadability of the butter. Microfix 8471 butter homogeniser Capacity: up to 1.400 Kgs/Hour Rotor motor power: 20 HP Feed worms motor: 3.8 HP Manual included Length: 200 cms Width: 90 cms Height: 170 cms Weight: Approx. 900 Kg Made in : Germany
Availability: immediately Location: near Dresden 1 apricot system (temperature control to + 95°C) - Working width approx. 800mm - Overall length approx. 2000mm - Working height approx. 870mm +/- 50mm with stainless handlebars.- Brake castors - Stainless steel frame construction in stainless steel 1.4301 – glass bead blasted - Conical drip plates – return flow apricot tub - Round cord belt transport 2-part with belt stripping in the return - Drive.- Deflection waves stainless steel 1.4301 with driven transfer shaft - Drive station SEW (7-20m/min.) - Stainless chassis with mounted apricot tray approx. 80 Lt. version double-walled with thermal oil filling and electric resistance heating. (Pre-tempering to approx. 60º C). Level query with acoustic signaling. - Product delivery via OMAC rotary lobe pump with downstream instantaneous water heater (electrically for tempe ...
At its core, the Marty 881 is a 2-component dosing and mixing system for reactive resins (e.g. polyurethane): It keeps the two components (typically polyol + isocyanate) available in separate circuits, conditions them (e.g. temperature/degassing depending on the design) and doses them in the set mixing ratio via metering/dosing pumps. The components are then brought together in the mixing head and discharged as a precisely defined quantity into the mould/mould or into a process (e.g. vacuum casting/impregnation). The 881 is particularly used for smaller mixing quantities; for example, very small minimum quantities and conveying ranges of up to about 1 kg/min are mentioned as a guideline.
MAK 8M32 Crankshaft for sale Used Standart size In our stock in Istanbul Turkey Please contact: info@fin-marine
Specifications: - Span width approx. 850 mm - Clamping surface height approx. 700 mm - Clamping block depth 300 mm - Total height with clamping base 750 mm - Clamping base dimensions 850 x 450 mm - Clamping holes M16 - Distance of the clamping holes 40 mm - Number of clamping holes per side 336 pcs - Total number of clamping holes 772 pcs - Internal dimensions of the clamping block 380 x 220 mm each - Wall thickness of the clamping areas approx. 40 mm - laterally screwed on 3 jaw lining 300 mm - side-screwed hydr. Machine vice RÖHM - Jaw width 200 mm - Weight approx. 700 kg
Butter Forming & Wrapping Machine Manufacturer: BENHIL Type: 8380 Working hours: 0 since reconditioned Capacity: 40... 90 Pa./min, infinitely adjustable Products: Butter, Margarine etc Choose Format: 250 gr. (100x70x35 mm) Folding: bottom folding Packing material: aluminium foil, parchment paper Dosing: volume doser from 100 .. 300 gr. Dosing precision: +/- 1 % Energy: 380 V/50 Hz; 2,2 KW Weight: 1.600 k
MEXPOL TUB 830 C CNC lathe was built in 2007 in Germany by MEXPOL Werkzeugmaschinen GmbH. The machine, with its extensive machining capabilities, is an excellent choice for both unit and series production. Workpieces with a maximum diameter of 830 mm are machined inside a large workspace by means of components characterised by the best technical parameters. In order to achieve excellent feed dynamics and repeatability, the X and Z axes are driven by powerful drives of the renowned SIEMENS company. The rigid design of the TUB 830 C x 2250, in turn, eliminates any vibration and oscillation, guaranteeing maximum process stability during even the most intense challenges. The MEXPOL TUB 830C CNC lathe is offered with a wide range of equipment, including an advanced SIEMENS CNC control and a MULTIFIX toolpost. The total weight of the machine is 4930 kg. Technical specifications of the MEXPO ...
Generator sets Condition: Used - USED Power: 880 kVA Availability: Available Spare parts availability time: 10 years and more Description: Generator set: Electro Diesel Range: Soundproof box Engine: ISSOTA FRASCHINI Type: V 1708 T3 TE 1550 Year: 1995 Operating hours: 400 H Price 9500 € Groupe MMO, the European leader in generator recycling, offers you a wide range of used generators. If you have a special need or request, contact us. #4012 #cummins #decarbonisation #perkins #pramac #groupeelectrogene #rachat_groupe_electrogene #revalorisation #achat_vente #sdmo #volvo_penta #aman #caterpillar #renault #johndeere #iveco #poyaud #doosan #mtu #kohler #detroit_diesel #wartsila #jenbacher #kta50
5BBL /800L Working Capacity Fermenting Vessel - stainless steel. Specification: Vessel = T 160 FV Gross Capacity 6 Barrels 220 Gallons 1000 Litres Material Stainless Steel – Grade 316 (1.44040) Description: Vertical stainless steel vessel, dished top and dished base. Free standing on 3-legs with adjustable feet. Fitted on the shell with a stainless steel Jacket, this is a low pressure open system jacket. Insulated on the shell in 50mm mineral wool insulation. Clad on the shell in bright polished, riveted stainless steel. Fittings: 1 x Top Manway Dia. 400m 1 x 1” RJT Feed to Dia.64 180° up pattern Spray Ball 1 x 120mm Dia, Viewing Glass 1 x 1½ RJT outlet with butterfly valve 2 x 1” BSP Male Inlet / Outlet to Jacket 1 x Temp pocket This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at ...
Maximum pressure: 9 tons Pressing force: 1.94 kg/cm² Bale size: 770x600x500 mm Bale weight: - Power supply: 400 V/4 kW Year of construction: 1997 Productivity: - Price: on request
WARTSILA 8L32 CRANKSHAFT STD SIZE TOGETHER WITH GEARS AND COUNTERWEIGHTS
used
Hello all We have in our stock in istanbul Turkey 2 x WARTSILA 8R32 CRANKSHAFTS, STD SIZE TOGETHER WITH GEARS AND COUNTERWEIGHTS Please contact us at : info@fin-marine for more info
Key data: 4200 mm, 1090 , 70
Screw diameter: 70 mm Injection weight in polystyrene: 1090 g Clamping force: 4200 kN Screw diameter: 70 mm Stroke volume: 1212 cm³ Injection weight in polystyrene: 1090 g/hp Injection pressure: 1,877 bar Clamping force: 420 t Lights Tie bar spacing H x V: 810 x 710 mm Tool installation height - min.: 380 mm Opening distance: 710 mm Microprocessor control: NC4 Screen text: German Operating instructions: German FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- Pump drive power: 45 kW Total connected load: 82.4 kW Total weight: 20,000 kg Total size: 7.9 x 2.3 x 2.5 m Payment terms: 100 % before taking over the machine, net only
Didar Part Number 2605710001 NSN 12-A01-7491 Original Part Number 0010989720 - 0000985320 In-Pipe Water Pressure 4.5 – 8 bar Out of Pipe Air Pressure 2.6 – 4 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 220 °C Amount of Water in the Pipe 7 Lt. Amount of Air Outside the Pipe 25 Lt.
Used Flottweg B-800 double-belt press. Technical data: Type: B-800 Hourly throughput [t/h]: 2-6 Belt width [mm]: 800 Drive power [kW]: 1.5 Electrical connection [V/A]: depending on the country of installation Pneumatic connection [bar]: 6 Design and operating principle: 1. The product is continuously fed into the feed box and evenly distributed on the lower belt. The height and width of the cakes can be adjusted to the specific product. 2. In the wedge zone, the upper belt is pressed against the product. A slow increase in pressure creates a stable product cake. 3. In the extrusion area, the cake is dewatered, first using a special profile roller, which ensures rapid liquid drainage to both sides of the cake. 4. The product is then effectively dewatered by pressure rollers with gradually decreasing diameters and increasing pressure. 5. Optional linear pressure rollers ...
Dimensions (L/W/H): 13000x1700x1700 mm Weight: 1650 kg Total power requirement: 10 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: - BIA tested welding suction device - Articulated suction arm 3000 mm - Air volume flow approx. 1000 m³/h - static pressure 2700 pa - Filter area approx. m² - Filter control - Light for filter change - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW - Space requirement approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg
The Kärcher HDS 895 is a powerful, heatable hot water high-pressure cleaner (steam jet) of the professional class. Technical Highlights & Performance Operation: The device runs via a 400V three-phase connection. Temperature: It reaches temperatures of up to approx. 98°C in hot water mode and has a special steam stage that can deliver up to 155°C. Pressure & Flow: Depending on the model variant (e.g. S, SX or Super), it delivers a working pressure of around 30 to 180 bar at a flow rate of approx. 400 to 1000 l/h. Special feature: In the steam stage (above 98°C), the pressure must be limited to a maximum of 32 bar for safety, for which a special steam wand is often required.
Machine Details Warehouse number 1105-03598 Machine Type Machining Center - Vertical Brand VERNIER GSP TRENS Type CV 800 Year of construction 1995 Control type CNC Control NUM 1060 Storage location HAGUENAU Country of origin Czech Republic Delivery time immediately Freight base from stock, freely loaded trucks Technical details x-travel 800 mm y-travel 610 mm z-travel 508 mm Table size 1050 X 420 mm Spindle holder ISO 40 Drilling capacity in St 60 - Full drilling 45 mm Thread cutting up to M 24 Speed range - infinitely variable 6000 rpm Feeds - longitudinal/transverse/vertical 1 - 5000 mm/min Rapid traverse 20 m/min Distance spindle/table 100 - 608 mm Number of tool magazine slots 30 Tool diameter with full assembly 80 mm Tool diameter with 2 free spaces 125 mm Tool length max. 380 mm Tool weight max. 7 kg Tool change time 7 sec Spindle 11 kW Control NUM ...
pressure: 200 t distance between columns: 1600 mm max. ram stroke: 600 mm dayligth: 900 mm table width: 1600 mm table depth: 1300 mm table height: 1060 mm ram surface: 1600 x 1300 mm T-slots: Din 650 / 22H12 rapid traverse: 400 mm/s return speed: 325 mm/s pressing speed: 42 mm/s bei 40% mm/sec pressing speed: 20 mm/s bei 100% mm/sec die-cushion pressure: 800 kN die cushion stroke: 150 mm speed of die cushion: auf 68/ ab 225 mm/s The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1200 mm table width: 800 mm : 28 mm table height: 450 - 800 mm : 500 kg weight of the machine ca.: 0,8 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Ribbed underside for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
OPS INGERSOLL GANTRY EAGLE 800 Year of construction 2013 EAGLE Powertec PC/NC Controller 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn Quick Programming Powertec Handheld Multifunctional Handheld Controller Manual EDM with Powertec Handheld EAGLE Powertec - Fine Finishing Generator PT 60, 60 Ampere High Speed Jump max. 18,000 mm/min. Travel (X, Y, Z) 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disc magazine Work container (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Top load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system incl. fire damper Electrode clamping system EROWA ITS ECOTEC Energy Saving Func ...
maximum number of results exceeded
please refine your search
