tapping center used for sale

Key data: 750 mm, 1524 mm

Control Mazatrol Matrix Max. Rotary Diameter 760 mm Max. turning length 1,524 mm Travel X-axis: 630 mm Y-axis: 230 mm Z-axis: 1,585 mm W-axis: 1,530 mm B-axis -30 to 210° Rapid traverse X/Y/Z/W 50/40/50/30 m/min Main spindle Drive power: 30 kW Max. spindle speed 3,300 rpm C-axis Max. bar passage: 102 mm Sub-spindle Drive power: 26kW Max. spindle speed 4,000 rpm C-axis Milling spindle Drive power: 18.5 kW Max. spindle speed: 12,000 rpm B-axis: 0.0001° Capto C6 Tool magazine / ATC 80 tool positions Max. tool diameter: 90/125 mm Max. tool length: 400 mm Max. tool weight: 10 kg Special equipment Cooling by the spindle High pressure pump 70 bar 20 l/min . PLC with 7 pressure levels Chip conveyor MAYFRAN CONSEP 2000 II 70 bar 20 l/min . PLC with 7 pressure levels Interface for bar feeder Automatic Parts Catcher Synchronized Threading ...

Key data: 660 mm, 1495 mm

Mazatrol Matrix Max. Rotary Diameter 660 mm Max. turning length 1,495 mm Travel X-axis: 580 mm Y-axis: 150 mm Z-axis: 1,545 mm W-axis: 1,490 mm B-axis -30 to 210° Rapid traverse X/Y/Z/W 50/40/50/30 m/min Main spindle Drive power: 22 kW Max. spindle speed 4,600 rpm C-axis Max. bar passage: 65 mm Sub-spindle Drive power: 18.5 kW Max. spindle speed 5,000 rpm C-axis Milling spindle Drive power: 18.5 kW Max. spindle speed: 12,000 rpm B-axis: 0.0001° Capto C6 Tool magazine / ATC 120 tool positions Max. tool diameter: 90/125 mm Max. tool length: 300 mm Max. tool weight: 10 kg lower turret Drum turret 9 tool stations 6 powered tool stations Max. speed: 6,000 rpm Special equipment Mayfran Consep 2000 II Chip Conveyor, Double Switching Filter Preparation IKZ 70 bar 70 bar high pressure pump Milling spindle synchronized threading Cyl ...

Year of construction 2019 Control Celos with Siemens 840D sl Operate including 21.5 ERGOline Control Travel X-axis: 490 mm Y-axis: 250 mm Z-axis: 1,300 mm B-axis: +120° to -120° Max. turning diameter 500 mm Max. turning length 1,200 mm Main spindle ISM102 Drive power: 37/28 kW Max. torque: 700/800 Nm Max. spindle speed: 4,000 rpm Max. bar passage: 104 mm Sub-spindle ISM52 Drive power: 14.5 kW Max. spindle speed: 6,000 rpm Milling spindle Drive power: 22 kW Max. spindle speed 12,000 rpm HSK-63A DIN69893 Tool magazine 80 tool positions Other equipment Interface for robots Glass scales in X, Y and Z axes MP 1.0 – Machine Protection Control Tool probes Workpiece probe, BLUM TC60 Sorting the tools in the magazine Technology cycle for the application of an alternating speed for vibration-critical voltages Chuck rinsing device on the ...

Inv. Num. : 8429 Type: Bluestar 6 Producer: HÜLLER-HILLE Created: 2006 Parameters: Work table length: 630 mm Work table width: 630 mm X-axis travel: 700 mm Y-axis travel: 630 mm Travel Z axis: 700 mm Max. tool diameter: 150 mm Max. tool weight: 10 kg

Control Winmax Travel X/Y/Z 2135 x 865 x 762 mm Spindle speed 12,000 min-1 Tool magazine for 40 Wkz., SK 40 Handwheel Ultimotion IKZ 40bar Probes Renishaw Conveyor

Machine Type: Turning Machine Model: Sprint 50 2T Manufacturer: DMG MORI Year of Manufacture: 2017 Specifications: - Spindle Speed (Max): - 1st Spindle: 7000 rpm - 2nd Spindle: 7000 rpm - Machine Weight: 9200 kg Electrical Specifications: - Power: 54 kVA - Current (Max): 135 A - Fuse Rating: 160 A - Voltage: - Main: 400 V ±10% - Auxiliary AC: 230 V - Auxiliary DC: 24 V - Frequency: 50 Hz Accessories/extras: CT-20D Hinge Belt chip extractor 2 pcs Sauter turret head Typ. Grip main spindle SPANNTOP mini 65 Grip counter spindle SPANNTOP mini 52 Unloading system Marposs TT30 tool setting system Artis CTM V6 tool wear and breakage monitoring system LNS Alpha 552 - 4 meter bar feeder Find more here - / Contact us at -

Ergomat TNG 32 + LNS Sprint 552 - Turning Center + Bar Feeder - FANUC 0i-TF CNC control - 60° inclined bed - Cross slides with linear guides - Parts separators - Coolant device -Conveyor - Switch-on time: 645 hours - Processing time: 390 hours - Year of construction 2022 LNS Sprint 552 - Bar Feeder - Rod Ø: 5 - 52 mm - Bar length: 3200 mm - Loading capacity: 11, 9, 8 bars Specifications Main spindle: - Bar passage Ø: 32 mm - Spindle speed max.: 5000 rpm - Collets DIN6343: 171-E A36 - Collets DIN6343: 161-E A25 Workspace: - Workpiece Ø/length: 32 / 75 mm - Travel in X: 300 mm - Travel in Y: 175 mm Cross slide "Gang Type": - Rapid traverse X: 12 m/min - Rapid traverse Z: 20 m/min - Number of tools: 7 - Tool shank Ø: 20 mm - Tool holder 4-point: 12 x 12 mm Coolant system: - Coolant pressure: 6 bar - Tank capacity: 100 l Performance data: - Po ...

Daewoo X: 1250 - Y: 1000 - Z: 1000 mm CNC X-axes: 1250 mm Y-axes: 1000 mm Z-axes: 1000 mm Table dimensions: 800 x 800 mm Max weight on the table: 2000 kg Admission in spindle (ISO): ISO 50 Power on the spindle: 25 kW Control: Fanuc OM Number of axes: 4 axes: X,Y,Z,B Toolstore: yes Tools: 90 positions Frequency : 20 -> 4500 rpm Number of pallets : 2x Power principal motor: 70 kva Length: 4100 mm Depth: 6850 mm Height: 3240 mm Weight: 18 ton ACCESSORIES: yes Cooling-system: yes

ISEL SM Alpha Omega – 5-axis CNC machining center with 2 spindles For sale is a precise and versatile ISEL SM Alpha Omega 5-axis CNC milling machine, built in 05/2015, equipped with two high-frequency spindles. This machine is ideal for applications in medical technology, precision engineering, micromachining, and mold and prototype construction. Specifications: Model: ISEL SM Alpha Omega Year of manufacture: 05/2015 Item number: 274507 SSZ6000 Axes: 5 (X, Y, Z, A, B) Travel: X-axis: 1800 mm Y-axis: 1700 mm Z-axis: 800 mm Spindles: Quantity: 2 high-frequency spindles Speed: up to 60,000 rpm Power: up to 6 kW Tool holder: HSK25 / HSK32 Dimensions (WxDxH): approx. 2800 x 2550 x 2950 mm Weight: approx. 1400 kg Solid steel/granite sandwich construction for high rigidity and vibration damping Highly dynamic linear motors in X and Y axes Turn/swivel  ...

GILDEMEISTER MF twin 65 CNC lathe was built in 2000 in Germany by GILDEMEISTER Drehmaschinen GmbH. This extremely efficient machine is used for precision machining of workpieces with a maximum diameter of 200 mm. The machining process is performed inside a large work space, by means of two spindles and tools taken from two 12-position turrets. This solution maximises production efficiency by enabling simultaneous workpiece machining on both spindles. What’s more, any vibration or oscillation is eliminated by a rigid bed, guaranteeing high process stability even during the most intense challenges. The MF twin 65 CNC turning center, including the control cabinet, weighs approximately 6500 kg. Technical specifications of the GILDEMEISTER MF twin 65 CNC dual-spindle lathe General data - number of axes: 4 (X1,X2,Z1,Z2) - swing over bed: 240 mm - maximum turning diameter: 200 mm - ma ...

A Röders vertical CNC high-speed machining center is available. Travel X/Y/Z: 600mm/450mm/300mm, speed: 42000rpm, tool holder: HSK-E40, power: 14kW, table dimensions X/Y: 700mm/500mm, max. workpiece weight: 800kg, feed: 30m/min, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3200mm/2250mm/2650mm, weight: approx. 5200kg. Including suction and cold water set. Documentation available. On-site inspection is possible.

Center width: 1000mm, turning diameter over bed/crank/trolley: 360mm/510mm/205mm, spindle bore: 42mm, speed: 2100rpm, machine dimensions X/Y/Z: approx. 1950mm/900mm/1350mm, weight: approx. 750kg. On-site inspection is possible.

Travel (X / Y / Z) 762 mm / 508 mm / 610 mm Table size 1,020 mm × 510 mm Table load max. 1,000 kg Spindle holder SK 40 (DIN 69871) Spindle speed max. 10,000 min⁻¹ Spindle power 11 kW Tool Stations 24 Stations, Automatic Tool Changer (ATC) Iobjwt Rfwstfb Tpmjic Max. tool weight 7 kg Max. tool length 300 mm Max. tool diameter 80 mm Rapid traverse (X / Y / Z) 24 m/min / 24 m/min / 20 m/min Feeds programmable up to approx. 7,600 mm/min Control HURCO Ultimax 4 Machine weight approx. 4,700 kg Machine dimensions (L × W × H) approx. 3.9 m × 2.4 m × 2.7 m

Year of manufacture 2007 Travel X 1270 mm Travel Y 660 mm Travel Z 610 mm Table size 1500 mm × 660 mm Table load 1300 kg Spindle speed up to 12,000 min⁻¹ Spindle drive approx. 18 kW Tool holder SK 40 Tool Stations 24-Fold Tool Changer Rapid traverse (X/Y) 30 m/min Rapid traverse (Z) 20 m/min Machine weight approx. 9000 kg to 9500 kg Machine dimensions (L×D×H) approx. 3.25 m × 2.35 m × 2.95 m

Manufacturer: Klaaßen Model: SDM15-5 Year of Manufacture: 2019 Type of Machine : Turning Machining Center - Turning Diameter: 1,500 mm - Center Distance: 4,500 mm Key Features: - 4-guideway bed machine - High-performance spindle box with backlash-free C-axis - Full-featured 3-axis milling (Y-axis travel = 340 mm) - Direct measuring system in each CNC axis - Infinitely adjustable motor milling spindle - Klaaßen motor milling spindle: 37 kW / 4000 rpm / 330 Nm (S1) - Automatic tool changer for turning and milling tools - Steady rests and tailstock fully traversable - Internal milling heads - Grinding support - Extensive accessories available Find more here - / Contact us at -

The machine is in good technical condition, a test run is possible by prior arrangement.

Ø min/max to be rectified: 3 - 300 mm, Dimensions of the work wheel: Ø610xØ304.8x508 mm, Dimensions of the drive wheel: Ø355xØ152.4x508 mm, Weight: 17000 kg, Power: 100 kW

Grinding wheel dimensions (h x w x d x w): Ø 508 x Ø 305 x width 655 mm, Ø min/max to be ground: 5/240 mm, Min/max speed of regulating wheel (rpm): 0/115 rpm, Type of control (cnc/manual): manual, In feed Grinding (auto/manual): manual, Dimensions of the regulating grinding wheel (h x w x d x w): Ø 330 x Ø 203 x width 655 mm, Maximum length to grind in feed grinding: 655 mm, Grinding wheel head motor power: 45 hp, Total power: 60 HP, Length 3.000 mm, Width 1.400 mm, Height 1.600 mm, Weight 11.500 Kg

Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Longitudinal auto, manual penetration of both grinding wheels, Cnc axes nº: 1, Diamond dressing speed: 255 r.p.m., Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300 mm, Width: 2.800 mm, Accessories included: Grinding wheel balancer, plongeé rule holders / Grinding wheel balancer, plongeé rule holders., High: 2.100 mm, Weight: 15.000 Kg

Dimensions: 1520x1020x1260mm, Weight: 1550 kg, Grinding wheel gap: 1.5/50mm, Max.width of wheel in feed grinding: 125mm, Working wheel dimensions (od x id x width): 325x175x125mm, Øext.min. working wheel: 220mm, Max. profile depth of the working wheel: 8mm, Driving wheel dimensions (od x id x width): 220x125x125mm, Øext.min. driving wheel: 165mm, Working wheel motor power: 7,5Kw, Driving wheel motor power: 0,75Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º

Ø max working wheel: 508, Ø min. working wheel: 380, Ø inside working wheel: 254 (305), Working wheel width: 205, Ø max. drive grinding wheel: 305, Ø min. drive grinding wheel: 230, Ø inside grinding wheel: 152.4, width of feed wheel: 205, Cutting speed: 30-45-60 m/s, R.p.m. of the driving wheel: 0-300, Diamond speed: 300, working wheel motor: 15 Kw (18Kw), Driving wheel motor: 10.4 Nm, Dimensions WxLxDxH: 2250x3380x2385, Weight: 9000Kg, CNC Brand: SIEMENS, CNC Model: 840 D, Number of CNC axes: 11

TECHNICAL INFORMATION:, Grinding wheel dimensions (od x id x width): Ø508xØ304.8x204 mm, Dimensions of the regulating grinding wheel (od x id x width): Ø304,8xØ152.4x204 mm, Main motor power: 20 Kw, Voltage: 380 V, Height: 1700 mm, Length: 2000 mm, Width: 1080 mm, Weight: 4315Kg approx. machine and 60 Kg box

Dimensions: 1520x1020x1260mm, Weight: 1550 kg, Grinding wheel gap: 1.5/50mm, Max.width of wheel in feed grinding: 125mm, Working wheel dimensions (od x id x width): 325x175x125mm, Øext.min. working wheel: 220mm, Max. profile depth of the working wheel: 8mm, Driving wheel dimensions (od x id x width): 220x125x125mm, Øext.min. driving wheel: 165mm, Working wheel motor power: 7,5 Kw, Driving wheel motor power: 0,75Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º

GENERAL CHARACTERISTICS:, Grinding Wheel Dimensions: Ø610xØ304,8x508 mm, Regulating Wheel Dimensions: Ø355xØ152,4x508 mm, Ø min/max to be rectified: 3 - 300 mm, Dimensions of the work wheel: Ø610xØ304.8x508 mm, Dimensions of the drive wheel: Ø355xØ152.4x508 mm, Weight: 17000 kg, Power: 100 kW

GENERAL CHARACTERISTICS:, Grinding Wheel Dimensions: Ø610xØ304,8x300 mm, Regulating Wheel Dimensions: Ø355xØ152,4x300 mm

GENERAL CHARACTERISTICS:, Grinding Wheel Dimensions: Ø610xØ304,8x300 mm, Regulating Wheel Dimensions: Ø355xØ152,4x300 mm

Grinding wheel dimensions (od x id x width): Ø 650 x Ø 304.8 x 500mm, Ø min/max to be ground: 3 / 200 mm, Ø min/max to be rectified: 3/200mm, Grinding wheel peripheral speed (m/s): Variable with regulator, Peripheral speed of grinding wheel (m/s): Variable with regulator, Width of regulating grinding wheel: 500 mm, Regulating wheel width: 500 mm, Number of regulating wheel speeds: Infinite, No. of regulating wheel speeds: Infinitas, Min/max. speed of regulating wheel (r.p.m.): 10 / 255 rpm, Min/max speed of regulating wheel (r.p.m.): 10 / 255 rpm, Diamond dressing (auto/manual): CNC automatic on 2 grinding wheels, Diamond cutting (auto/manual): Automatic CNC 2 grinding wheels, Diamond speed: 255 r.p.m., Diamond cutting speed: 255 rpm, Lubrication (auto/manual): Automatic, Greasing (auto/manual): Automatic, Control type (cnc/manual): CNC, No. of cnc axes: 8, Plongée (auto/manual): Au ...

Rectificadora sin centros GOZUA RC 2-75

Diámetro de la muela principal 250 mm Diámetro de la muela auxiliar 200 mm Unidad de diamantado Esmerilado de alimentación pasante Filtro de papel Diámetro máximo: 50 mm

Hydraulic clamping table, Automatic wheel balancer, Fairing, Hydraulic working wheel cover, AEROEL measuring equipment, Hydraulic table clamping, Hoist for 1,000 kg, Electric cabinet cooling, Pneumatic box, Coolant transfer tank, Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Automatic - CNC, Diamond dressing speed: 255 r.p.m., Lubrication (auto / manual): Automatic, Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300 mm, Width: 2.800 mm, High: 2.100 mm, Weight: 15 ...

Ø grinding wheel dimensions (od x id x width): Ø650xØ304.8x500 mm, Ø min / max to grinding: 3/200 mm, Peripheral grinding wheel speed (m / s): 35 m / s, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/225 rpm, Dressing (auto / manual): Automatic CNC the two wheels, Diamond dressing speed: infinite 10/225 rpm, Lubrication (auto / manual): automatic, Control type ((cnc / manual): CNC, Cnc axes nº: 6, Infeed (auto / manual): Automatic CNC, Regulating wheel dimensions (od x id x width): Ø355xØ203,2x500 mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Weight: 14,000 Kg machine + peripherals, Accessories included: Fairing, hydraulic work cap, hydraulic ruler / Machine casing, hydraulic cover of the grinding wheel, hydraulic workrest

Grinding wheel gap: 1.5 / 50 mm, Max.width of wheel in feed grinding: 125 mm, Working wheel dimensions (od x id x width): 325 x 175 x 125 mm, Øext.min. working wheel: 220 mm, Max. profile depth of the working wheel: 8 mm, Lubrication (auto / manual): Manual, Control type ((cnc / manual): Manual, Driving wheel dimensions (od x id x width): 220 x 125 x 125 mm, Øext.min. driving wheel: 165 mm, Working wheel motor power: 7,5 Kw, Long: 1520 mm, Width: 1020 mm, High: 1260 mm, Weight: 1550 Kg, Driving wheel motor power: 0.75 Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º

Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min / max to grinding: 1.5 / 120 mm, Regulating wheel width: 254 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 10/250 r.p.m., Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Power hydraulic motor: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 2.300 mm, Width: 1.885 mm, High: 1.900 mm, Weight: 6.420 kg, Accessories included: