tapping center used for sale

Axile G8 5 axis machining center Machine is like new condition 48 ATC 20000 rpm X: 670 mm Y: 820 mm Z: 600 mm

grinding diameter max.: 130 mm regulating wheel width: 250 mm max. width of grinding wheel: 250 mm Control: Siemens Sinumerik 3 total power requirement: 35 kW weight of the machine ca.: 6500 kg dimensions of the machine ca.: m max.workpiece length for plunge-cut grinding 250 mm max.workpiece length for throughfeed grinding 300 mm grinding wheel size: diam. x width 600 x 250 mm regulating wheel size: diam. x width 350 x 250 mm grinding speed 35 / 45 / 60 m/sec. regulating wheel speed stfl. 8- 100 rpm (360 rpm) control wheel slide swivels + 2 to - 7° grinding wheel drive 22 kW total drive 35 kW equipped with: - Standard version with double bearing mounted grinding spindle and control spindle. - SIEMENS CNC control type Sinumerik 3 for control of all feeds, speeds and dressing programs. For rapid traverse approach, roughing, finishing, fine finishing and spark out, all feed and time  ...

: neu : ca. 6 Monate ab Auftragse : Bulgarien : 78300 € : 1566 € : 760 mm : 3000 mm : 380 mm : 132 mm : 520 mm : 560 mm : 11 : 140 M : 3 : 7 - 42, 28 - 170, 165 - 1 U/Min : 150 : 0.039 mm/U : 0.02 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 2 - 240 : 410 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 4470 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position steady and following rest coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill ...

: neu : ca. 6 Monate ab Auftragse : Bulgarien : 46190 € : 933.04 € : 500 mm : 1500 mm : 250 mm : 75 mm : 300 mm : 400 mm : 8 : 80 M : 3 : 25-100, 100-400, 500-2000 U/Min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 0.5 - 120 mm : 0.125 - 30 : 1 - 240 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 11 kW : 2950 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length 1.000 mm € 45.150,- turning  ...

: neu : ca. 6 Monate ab Auftragse : Bulgarien : 55600 € : 1112 € : 630 mm : 2000 mm : 315 mm : 103 mm : 430 mm : 400 mm : 11 : 120 M : 3 : 16 - 63, 63 - 250, 315 - U/Min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 0.5 - 120 mm : 060 - 1/4 Gänge/ : 0.125 - 30 : 1 - 240 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3310 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length 1.000 mm � ...

: neu : ca. 6 Monate ab Auftragse : Bulgarien : 23160 € : 472.46 € : 400 mm : 750 mm : 165 mm : 32 mm : 190 mm : 200 mm : 5 : 4,5 M : 2 : 85-405, 470-2200 U/Min : 48 : 0.006 - 1.77 mm/U : 0.003 - 0.885 mm/U : 0.1 - 28 mm : 0.1 - 1.75 : 4 - 70 : 150 mm : 95 mm : 40 mm : 3 MK : 100 mm : 2.2 kW : 770 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 23.480,- The data for this ad was created with ModulMWS  ...

: neu : ca. 6 Monate ab Auftragse : Bulgarien : 37580 € : 759.12 € : 400 mm : 750 mm : 200 mm : 52 mm : 235 mm : 320 mm : 6 : 6 M : 4 : 18-98, 48-265, 144-790, 3 U/Min : 80 : 0.015 - 0.6 mm/U : 0.0075 - 0.3 mm/U : 40 : 0.25 - 7.5 mm : 120 - 4 Gänge/ : 0.0625 - 1.875 : 16 - 480 : 235 mm : 110 mm : 50 mm : 4 MK : 100 mm : 7.5 kW : 1530 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length 1.000 mm € 38.210,- turning  ...

Deckel Maho 600E vertical machining center axis: X : 600 mm Y : 450 mm Z : 450 mm

YOM 2009 X 660.4 mm Y 355.6 mm Z 457.2 mm Power 7.5 kW RPM 8,000 RPM # ATC 16 Table-W 355.6 mm Table-L 736.6 mm Taper CAT-40 Weight 8400 (LBS) Control CNC (HURCO MAX)

Hydraulic self-centering bezel, Luenette, Lynette SMW AUTOBLOK Hydraulic bezel with hydrostatic bearing Suitable for GILDEMEISTER / MAX MÜLLER Lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar Bezel base: 245 x 240 mm Type: fixed - 3 pieces roller bearing 35 mm- roll width 18 mm - hydraulically self-centering Dimensions L x W x H: 350 x 250 x 550 mm Net weight: 65 kg good condition; used

Huron EX10C 5-axis machining center Year 2001 Coolant 60 Bar Vibration sensor Blum laser probe x y z 1200 x 700 x 800mm

Vertical Machining Center Manufacturer: Deckel Maho Model: 60 CNC: Heidenhain 426

5-axis machining center Manufacturer: Deckel Maho Model: DMU 70 V

X-axis 700 mm Y-axis 550 mm Z-axis 500 mm Table dimensions 900 x 550 mm Max weight on the table 800 kg Number of axes 3 Number of rotations 18000 rpm

Drilling, dowel and milling centre Stegherr FD-E For efficient doweling of corner joints in windows and doors, doweling of transoms, setting timber and central friezes as well as milling out recesses for fittings and door locks. 4 controlled servo axes (X, Y, Z, NC-Stop) Positioning stop NC-Stop Stop extension NC-Stop to 3200 mm Lateral workpiece pressure unit on machine table Increase of clamping height to 140 mm Workpiece scanning horizontally Vertical workpiece scanning Workpiece Length Measurement Horizontal milling unit: 3.5 kW, up to 15000 rpm, Vertical milling unit: 2.4 kW, up to 15000 rpm Drilling unit for one dowel drill bit at a time Drilling unit for one drill bit at a time D6 mm (Safety Signs) Drilling unit for holding multiple drill heads (Griffolive) Drilling unit for holding multiple drill heads (cup belt) Pneum. Swivel device for 2 pos. Extensi ...

The machine is in good technical condition. Table clamping surface: 1000 x 500 mm Travel of the X axis: 750 mm Travel of the Y axis: 500 mm Travel of the Z axis: 500 mm Dimensions LxWxH: 2320 x 2590 x 2560 mm Machine weight: 4000 kg Upon prior agreement, a running inspection is possible

Longitudinal movement of the table - x-axis: 1250 mm Transverse table movement - y axis: 1250 mm Vertical movement of the table - z axis: 1000 mm Max. workpiece weight: 2800 kg Max. workpiece height:: 1600 mm Max. workpiece diameter:: 1250 mm

Makino A55e Horizontal Machining Center ::SPECIFICATIONS::: CNC Model: Makino CNC version: Professional 3 (Fanuc 16iM) Tool connection: HSK 63 Spindle power: 20Kw Number of spindle revolutions: 14000 Number of tools: 133 X Axis Stroke: 560mm Y-axis stroke: 560mm Z Axis Stroke: 600mm Rapid feeds linear axes X Y Z: 90m/min Guides: roller Pallet size: 400x400mm Pallet type: indexed Maximum load allowed: 500Kg High cooling pressure: yes Pressure value: 70bar System with external tank with filter: yes Chip evacuator: carpet Machine equipment: Marposs probe :::D IMENSIONS AND WEIGHT::: Length: 4800mm Width: 2200mm Height: 3000mm Weight: 9000Kg

Hartford Double Column Machining Center X Y Z : 2000x1500x800 BT50 Mitsubishi control unit 6000 rpm Hartford

Horizontal machining center Kafo HVC 500 :::SPECIFICATIONS::: CNC Model: Fanuc CNC version: 18i MB Tool connection: BT 50 Spindle power: 25Kw Number of spindle revolutions: 10000 Number of tools: 60 X Shaft Stroke: 720mm Y Axis Stroke: 650mm Z Axis Stroke: 650mm Rapid feeds linear axes X Y Z: 48m/min Pallet size: 500x500mm Pallet type: indexed Pallet degrees: 0.001 Maximum load allowed: 800Kg High cooling pressure: yes Pressure value: 20bar System with external tank with filter: yes Chip evacuator: carpet :::D IMENSIONS AND WEIGHT::: Length: 4035mm Width: 5170mm Height: 3000mm Weight: 13000Kg

Fadal VMC 6535 CNC Vertical Machining Center Machine is in good working condition Maximum spindle speed: 15.000 rpm X : 1700 mm Y : 890 mm Z : 1050 mm

DMG DMC 160U DUOBLOCK WITH 6 PALLET CHANGER Manufacturer DMG Model DMC 160U duoBLOCK Year 2008 CNC SIEMENS 8400 Powerline 3D Table Rotary pallet changer INCLUDED Rotary pallet storage RS4 – 4 pallets + 2 pallets in machine INCLUDED Total pallets 6 Pallet surface 1.250×1.000 mm. T Slots DIN 55201-A2 Table turning range (C Axis) 0,001 º (Continuous) Travels and feeds Longitudinal travel (X Axis) 1.600 mm. Cross travel (Y Axis) 1.250 mm Vertical travel (Z Axis) 1.000 mm. Main Spindle Automatic swivel milling head 0.001 º (Continuous) Rapid Traverse 60.000 mm/min Spindle taper HSK-A 63 DIN 69893 Spindle speed 20-30.000 rpm Main spindle power 85/65 kW Main spindle torque 40/32 Nm Automatic tool changer Type Horizontal double gripper ATC positions 120 Equipment Internal Coolant 50 bar INCLUDED Coolant deposit capacity 980 l. Oil and emulsion mist separ ...

Manufacturer DMG Model DMU 160P Year 2002 CNC HEIDENHAIN iTNC-530 Table Table surface 1.500 x 1.250 mm. Max weight allowed on table 4.000 kg. Table turning range (C Axis) 0.001 º (Continuo) Travels and feeds Longitudinal travel (X Axis) 1.600 mm. Cross travel (Y Axis) 1.250 mm Vertical travel (Z Axis) 1.000 mm. Horizontal / Vertical Auto Indexing Head (A Axis) 0,001 º (Continuo) Rapid Traverse 60.000 mm/min Spindle taper SK-40 DIN 69871 Spindle speed 20-18.000 rpm Main spindle power 28 kW Equipment Automatic tool changer INCLUDED ATC positions 60 Coolant deposit capacity 200 l. HEIDENHAIN optical scales INCLUDED Chip conveyor INCLUDED Portable handwheel HEIDENHAIN HR-410 3D-Rot INCLUDED Tool touch probe INCLUDED M-function for internal / external lubricant INCLUDED Ready for internal coolant INCLUDED Mode 4 operation INCLUDED Others Positioning precisi ...

Frontier MCV-1270 Vertical Machining Center X : 1250 mm Y : 700 mm Z : 600 mm Machine is like new condition

Awea AF-1060 Vertical Machining Center Working hour : 600-700( March 2024) Machine is like new X : 1060 mm Y : 650 mm Z : 650 mm Mitsubishi M80A

Deckel Maho MH1600 Vertical Machining Center X : 1600 mm Y : 800 mm Z : 800 mm 4000 rpm Maintenance has been done. Machine is in good working condition

Quaser MV154EL CNC Vertical Machining Center X : 1020 mm Y : 530 mm Z : 560 mm Machine can be seen in working condition

Table length: 630 mm Table width: 500 mm Longitudinal X: 500 mm Cross Y: 450 mm Vertical Z: 400 mm Positions ATC: 16   Positions APC: 1   CNC Brand: Siemens CNC Model: SIEMENS 840D X - Travel:               500mm Y - Travel:               450mm Z - Travel:               400mm B - Axis:                 -5 up to +110 Gr° Table Length:             630mm Table Width:              500mm Table load:               350 Feed rate X-Axis:         12000mm/min. Feed rate Y-Axis:         12000mm/min. Feed rate Z-Axis:         12000mm/min. Spin ...

Table length: 1080 mm Table width: 580 mm Longitudinal X: 1000 mm Cross Y: 600 mm Vertical Z: 760 mm Positions ATC: 24   Positions APC: 0   CNC Brand: Heidenhain CNC Model: HeidenHain TNC 430 X - Travel:     1000mm Y - Travel:     600mm Z - Travel:     760mm Table Length:   1080mm Table Width:    580mm Table load:     1000 Feed rate X-Axis:15000mm/min. Feed rate Y-Axis:15000mm/min. Feed rate Z-Axis:15000mm/min. Spindle Taper:  40ISO/Bt/Mk Speeds / ranges:8000Rpm ATC / revolver: 24 Chip conveyor:  yes Coolantsystem:  yes Length:         3200mm Width:          2100mm Height:         2900mm Weight:         6200kg

Table length: 840 mm Table width: 420 mm Longitudinal X: 560 mm Cross Y: 410 mm Vertical Z: 520 mm Positions ATC: 16   Positions APC: 0   CNC Brand: Heidenhain CNC Model: Heidenhain TNC 370 X - Travel:              560mm Y - Travel:              410mm Z - Travel:              520mm Table Length:            840mm Table Width:             420mm Table load:              250 Feed rate X-Axis:        5000mm/min. Feed rate Y-Axis:        5000mm/min. Feed rate Z-Axis:        5000mm/min. Spindle Taper:           40ISO/Bt/Mk Power on spindle:        7.5kW Speeds / ranges:&n ...

Table length: 800 mm Table width: 800 mm Longitudinal X: 1200 mm Cross Y: 600 mm Vertical Z: 700 mm Positions ATC: 72   Positions APC: 0   CNC Brand: Heidenhain CNC Model: HeidenHain iTNC 530 X - Travel:               1200mm Y - Travel:               600mm Z - Travel:               700mm A - Axis:                 - 180 to + 180° B - Axis:                 - 90 to + 90° Table load:               800 Table  Ø:                 800mm Feed rate X-Axis:         20000mm/min. Feed rate Y-Axis:         20000mm/min. Feed rate Z-Axis:  ...

Table length: 1200 mm Table width: 600 mm Longitudinal X: 1020 mm Cross Y: 610 mm Vertical Z: 610 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Heidenhain CNC Model: HeidenHain iTNC530 X - Travel:               1020mm Y - Travel:               610mm Z - Travel:               610mm Table Length:             1200mm Table Width:              600mm Table load:               1000 Feed rate X-Axis:         15000mm/min. Feed rate Y-Axis:         15000mm/min. Feed rate Z-Axis:         15000mm/min. Spindle Taper:            40ISO/Bt/Mk Power on spi ...

Longitudinal X: 700 mm Cross Y: 400 mm Vertical Z: 360 mm Spindle speeds maximum: 10000 rpm Feed maximum: 10000 mm/min Positions ATC: 60   Positions APC: 2   CNC Brand: Fanuc CNC Model: Fanuc 16i MB 5 Axis machining center Loading FANUC Robot RARC mate 210iB Martin Mechanic workpiece product storage tower X - Travel:               700mm Y - Travel:               400mm Z - Travel:               360mm Table  Ø:                 1400mm Feed rate X-Axis:         10000mm/min. Feed rate Y-Axis:         10000mm/min. Feed rate Z-Axis:         10000mm/min. Spindle Taper:            Big PlusISO/Bt/Mk Power on  ...

Spinner U630 5 axis Machining Center X : 630 mm Y : 530 mm Z : 465 mm

Machine Details Stock number 1105-03796 Machine type CNC lathe Make HARDINGE Type ELITE II 8/51 Year of construction 2006 Control type CNC Control FANUC 21 I TC Storage location FRANCE Country of origin UK Delivery time by arrangement from location Off-site freight base, uninsured Technical details Turning diameter 340 mm Turning length 350 mm Control FANUC 21 I TC Speed 5,000 rpm Drive power 11 kW Number of tools 12 pcs. Number of revolvers 1 Tool holder VDI 30 Information Clamping device main spindle 3 BAKENchuck Tailstock Programming system fanuc 21 I TC 3 AXIS WITH LIVE TOOLS VERY NICE MACHINE CHIP CONVOYER

This Makino V55 Vertical Machining center was manufactured in the year 2001. It is equipped with a Fanuc Professional 3 control unit. The machine has a spindle speed of 20000 rpm.

This GENTIGER GT-1614 Vertical Machining center was manufactured in the year 2010. It is equipped with a HEIDENHAIN control unit.

This Mazak VTC 300 C Vertical machining centre was manufactured in the year 2004. It is equipped with a spindle and a chip conveyor. The machine is included with 30 tools.

This Mazak VTC-200B Vertical Machining center was made in the year 2000. It is equipped with a Mazatrol PC-FUSION-CNC control unit.

This Mazak HCN-5000 Horizontal Machining center was manufactured in the year 2018. It is equipped with a Mazak Smooth G control unit. The machine has a spindle speed of 18000 rpm.

Complete machining in interior fittings on only 4.8 m2 Full-fledged cnc Milling Drilling Saw Clamex Lamello Connectors Working width 1250 mm Infinite length Tool change

This HERMLE C20U Vertical Machine Center was built in the year 2008. It is equipped with a HEIDENHAIN TNC 530 CNC control unit and has 5 axis. The machine has a spindle speed of 18000 rpm.

Table size 1500 x 710 mm Longitudinal travel 1300 mm Cross travel 850 mm Vertical travel 800 mm Spindle speeds 80 - 8.000 rpm Tool change 24 pcs Spindle taper ISA 40 Control FANUC O-M

Machine Details Stock number 1105-03807 Machine type CNC turning and milling center Brand Mori Seiki Type NL 2000 SY Year of construction 2005 Control type CNC Control MSX 850 Mapps 3 Storage location FRANCE Country of origin Japan Delivery time immediately Freight Base EX WORK Technical details turning diameter 356 mm Turning length 510 mm Control MSX 850 Mapps 3 Swing diameter 755 mm Standard turning diameter 275 Rod diameter 65 mm Travel - x 260 mm Travel - z 590 mm Spindle drive 15 kW Spindle speed 5000 1/min Turret stations / powered 12/12 Rapid traverse - longitudinal/flat 30 m/min Total power requirement 32 kW Machine weight ca. 5,8 t Space requirement approx. 2320 x 1783 x 1819 mm Accessories Conveyor High-pressure cooling 5 bar Workpiece counter Total counter Double foot switch Information High performance CNC lathe SUP SPINDLE + C AXIS + ...

This INTOS VOC 1000 Vertical Machining Center was made in the year 2003 in the Czech Republic. It is equipped with a Siemens control unit and has 3 axis. The machine has a spindle speed of 8000 rpm.

This MAZAK MTV655/60 Vertical Machining center was manufactured in the year 1996 in Japan. It is equipped with a MAZATROL M PLUS control unit. The machine has a spindle speed of 25 - 6000 rpm.

This FIDIA DIGIT 318 FH Vertical Machining center was manufactured in the year 2000. The machine has a spindle speed of 30000 rpm.

This Quaser MK603SP/12B Vertical Machining center was manufactured in the year 2011 in Taiwan. It is equipped with a Fanuc 18i-MB control unit and has 3 axis. The machine has a spindle speed of 12000 rpm.

CNC vertical machining center SIGMA Leader 5 - Control: iTNC 530 - Usable work surface 1400 x 700 mm - Travel distances: X 1250 mm / Y 810 mm / Z 630 mm - feed speed 40,000 mm/min -El. Handwheel - Heidenhain touch probe - Cooling by the spindle 30 bar -Aspirator - Tool measurement Renishaw (not used) - Rotary table Nikken Ø320 - Magazine with 50 seats FOR REPAIR or OVERHAUL - Motor spindle damage electrical - Control supply unit UV 101B approx. EUR 600,00