tapping center used for sale

DAEWOO PUMA 300 LB (Doosan), 2-axis CNC lathe, CNC Fanuc 18T, Hydraulic tailstock, Condition: very good. This machine can be inspected in our warehouse, under power., Mimu machine tools Italy

Key data: 1000 mm, 900 mm, 700 mm

We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMU 100 eVo Year of Make: 2013 Condition: Very good – machine partially overhauled in 2023  Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain HR 410 Technical data: • Spindle: 18000 rpm, infinitely variable • HSK-A63 interface • 60x WZW • Swivel rotary table 950 mm x 800 mm • B-axis 5°/+110° • C-axis 360° • IKZ (internal coolant supply) 40 bar • 600 l coolant tank with paper belt filter • Chip conveyor • Rinsing gun • Blowing air through spindle center Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

Used machine in good condition. Available for immediate delivery. - Rapid Traverse (X x Y x Z): 30.000 mm/min - Rapid Traverse (X x Y x Z): 650 x 400 x 305 mm/min - Number of tool stations: 22 - Spindle taper: BT-30 - Spindle power : 7,4 kW - Max. spindle speed: 16.000 rpm - Max. tool diameter: 80 mm - Max. tool weight: 3 kg - Coolant tank capacity: 200 l - Dimensions (long x wide x high): 3.248 x 1.837 x 2.696 mm - Weight: 3.500

Key data: 750 mm, 650 mm, 560 mm

We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMU 75 monoBlock Year of Make: 2017 Condition: Very good  Control: Name: Heidenhain TNC 640 Handwheel: Heidenhain Technical data: • Spindle: 20-20000 rpm, infinitely variable • HSK-A63 interface • 60x WZW • Swivel rotary table • CNC rotary table Ø 650 mm • Integrated with 800 mm x 650 mm • IKZ (internal coolant supply) 40 bar • 600 l coolant tank with paper belt filter • Flushing gun with pump, 2 bar // 40 l/min • Chip conveyor • Cooling device blowing air by spindle medium, selectable via M-function • Oil and emulsion mist separation system, mechanical filter, throughput volume 600 m³/h • Infrared probe Heidenhain TS 649 • 3D quickSET • Spindle load indicator for main drive, integrated in headstock cover • Mechan ...

Used machine in good condition. Available for immediate delivery. - Number of tool stations: 24 - Control: FANUC - Working area (X x Y x Z): 1.300 x 600 x 600 mm - Max. workpiece weight: 1.000 kg - Max. spindle speed: 9.000 rpm - Axes: 3 - Dimensions (long x wide x high): 3.550 x 2.568 x 2.171 mm

Key data: 730 mm, 560 mm, 560 mm

We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMU 60 monoBlock Year of Make: 2006 Condition: Good  Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain HR 410 Technical data: • Spindle: 20-18000 rpm, infinitely variable • HSK-A63 interface • 60x WZW • Rotary table Ø 600 mm (C-axis) integrated into 1000 mm x 600 mm • B-axis (infinitely variable) • IKZ (internal coolant supply) 40 bar • 600 l cooling lubricant tank with paper belt filter • Chip conveyor • Rinsing gun • Oil and emulsion separation plant • Blowing air through spindle center Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

Used machine in good condition. Available for immediate delivery. - Spindle taper: BBT40 - Max. tool length: 300 - Number of tool stations: 30 - Spindle power : 18.5/11 kW - Rapid Traverse (X x Y x Z): 36 x 36 x 36 mm/min - Travel (X x Y x Z): 900 x 460 x 520 mm - Control: FANUC - Max. workpiece weight: 600 kg - Max. spindle speed: 12.000 rpm - Max. tool diameter: 80 mm - Chip extractor: YES - Internal cooling: YES - High pressure pump: 20 Bar - Axes: 3 - Dimensions (long x wide x high): 2.805 x 2.180 x 3.026 mm - Weight: 5.500

Key data: 1000 mm, 1250 mm, 1000 mm

We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMC 100 U duoBlock Year of Make: 2015 Condition: Very good  Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain Technical data: • Spindle: 20-12000 rpm, infinitely variable • HSK-100 interface • B-axis (infinitely variable) • C-axis as pallet carrier • 2-fold pallet changer • Pallet size: 1000 mm x 800 mm • 180x WZW • Max. workpiece weight: 2000 kg • IKZ (internal coolant supply) 40 bar • 980 l coolant tank with paper belt filter • Blowing air through spindle center • Chip conveyor • Probe TS 649 • Tool breakage detection • Machine Protection Control (MPC) • 3D quickSET • ATC • BA 4 (extended manual intervention) Prior sale is reserved. No liability is assumed for the technical information provided here. ...

Number of axes: 5 Feed speeds in the X/Y/Z axis: 500/420/380 mm Feed rates in the C/B axes: 180°/360° Dimensions of the work table (L x W): 500 x 380 mm Maximum workpiece weight: 350 kg Spindle power: 15 kW Maximum spindle speed: 18000 rpm Tool magazine capacity: 30 pcs. Overall dimensions (L x W x H): 3360 x 2550 x 2600 mm Total weight of the DMU 50 eVolution machine: 6000 kg

Key data: 1000 mm, 1000 mm, 1000 mm

We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMC 100 U duoBlock Year of Make: 2006 Condition: Very good  Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain HR 410 Technical data: • Spindle: 18000 rpm, infinitely variable • HSKA-63 interface • 180x WZW • 2-fold pallet changer • Pallet size: 1000 mm x 800 mm • NC swivel rotary table • IKZ (internal coolant supply) 40 bar • Chip conveyor • Coolant tank with paper belt filter Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

x-travel: 350 mm y-travel: 240 mm Ucblcnl2H9 z-travel: 340 mm Speed: 20 - 4,500 1/min Table: D 400 x 280 Control: 810 D Shop mill SIEMENS Tool holder: SK 40 Rapid traverse: 5 m/min Spindle: 6.3 / 10 kW Total connected load: 15 kVA Approx. space requirement: 1.7 x 1.55 x 2.1 m Universal CNC Milling Machine, Rotary swivel table manual with angle display on the screen, El. Handwheel

Key data: 800 mm, 1050 mm, 850 mm

We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMC 80 U duoBlock Year of Make: 2014 Condition: Very good Control: Name: Heidenhain 640 Handwheel Heidenhain Technical data: • Spindle: 20-20000 rpm, infinitely variable • HSK-A63 interface • 123x WZW • B-axis (infinitely variable) • C-axis as pallet carrier • 2-fold pallet changer • Pallet size: 800 mm x 630 mm • IKZ (internal coolant supply) • Operating station for WZW • Coolant tank with paper belt filter • Signal light • 3D quickSET • Infrarottprobe • Blum Laser Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

Key data: 2 mm, 810 mm, 700 mm

General Manufacturer: Spinner Type: MVC1600-B Year of Make: 2006 Switch-on hours: 30,240 h Control: Siemens 810D ShopMill Travels: X 1,600 mm Y 810 mm Z 700 mm Spindle Speed: 6,000 rpm Power: 25 kW Tool holder: SK50 Tool Changer Number of stations: 24-fold with double arm Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Conveyor Blow-out device for spindle High-pressure system IKZ 26 bar Preparation 4th axis Preparation of workpiece probes

Key data: 1524 mm, 660 mm, 610 mm

General Manufacturer: Hurco Type: VMX60t Year of Make: 2011 Control: WIN MAX Travel: X 1,524 mm Y 660 mm Z 610 mm Spindle Speed: 12,000 rpm Spindle hours: approx. 1,937 h Tool holder: SK40 Tool Changer Number of stations: 24x Table Table size: 1,675 x 660 mm Table load: max. 1,500 kg Dimensions and weight Dimensions: 4,650 mm x 3,470 mm x 3,030 mm Weight: approx. 8,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Chip conveyor IKZ 20 bar Spindle coolers Coolant system Preparation of the Renishaw touch probe Flushing system for chip removal Cooling Water Spray Gun Electronic handwheel DXF Software Mechanical engineering package: Dialog Cycle Groove Dialog Polygon Cycle Dialog Cycle Thread Milling Angular Support for Circular Arc Dialog Reference point for engraving Flexible ...

CNC Lathe - twin turret - subspindle Y axis NAKAMURA WT 250 CNC Fanuc, Series 16i-T, Spindle - sub spindle 1 turret live tools + Y axis 1 turret live tools (lower), 2x C-Axis, Swarf conveyor, IEMCA TS560P Bar loader Under power in our in our warehouse in Gussago BS. Mimu machine tools Italy

Travel X/Y/Z: 2000mm/600mm/800mm, rapid traverse: 30m/min, feed rate: 30m/min, max. spindle speed: 9000rpm, tool holder: SK40, tool positions: 48, clamping plate: 650×2500mm, control: Bosch Type 3 OSA. Documentation available. An on-site inspection is possible.

Inv. Num. : 8135 Type: MCV 750 A speed Producer: MAS Created: 2020 Parameters: Control system: Heidenhain 640 Number of axes: 4 pieces Minimum vertical spindle speed: 12000 1/min X-axis travel: 750 mm Y-axis travel: 500 mm Travel Z axis: 500 mm Number of all tools: 24 pieces Rapid traverse X/Y/Z: 40000/40000/40000 mm/min Total power: 50 kW Machine height: 2500 mm Machine length: 3400 mm Machine width: 3110 mm Machine weight: 5250 kg Equipment: Chuck TOS UIS 200/4-1-M2; TOS UIS 250/4-2-M1

Sheet metal centering pull-down unit GENUSTECH PM4I2V395MEMB50C-287 flange diameter: Ø 56 / 72 mm Sensor unit: SENSTRONIC A1202R6K700111 10 - 55 V DC approx. 0.2 m Connection cable New ! Dimensions: 210 x 80 x 90 mm

Centering vise PAGUS jaw height: 50 mm span: 0...95 mm on table with graduation 360° rotatable Dimensions: 330 x 255 x 160 mm

turning diameter:1390 mm turning length:14000 mm weight of the machine ca.:13 t More information can be found in the Appendix.

Spindle with centering tip, clamping device PAGUS clamping range: 145 mm base plate 215 x 100 mm shaft diameter: Ø 40 mm Handwheel diameter: Ø 250 mm Dimensions: 600 x 250 x 250 mm

x-travel:1000 mm y-travel:800 mm z-travel:800 mm weight of the machine ca.:24000 t dimensions of the machine ca.:ca. 7,8 x 6,1 x 3,4 m m

x-travel:800 mm y-travel:460 mm z-travel:510 mm total power requirement:20 kW weight of the machine ca.:8 t Vertical Processing Centre 20kW is the nominal value. The spindle only needs 7.5kW. It looks like 15kW will be enough.

x-travel:560 mm y-travel:450 mm z-travel:450 mm table surface area:760 x 410 mm turning speed range:8.000 U/min total power requirement:20 kW Vertical Processing Centre

Centering disc, tube clamp PAGUS Ø 300 - 340 mm used, tested ! Dimensions: 340 x 340 x 50 mm

Centering Vise, Centric Clamp PAGUS Jaw Width: 100 mm Jaw Height: 55 mm Wingspan e: 0...70 mm can be rotated on carriage with millimeter scale - 70 - + 70 mm on a rotary table with graduation: - 90° - + 90° 360° rotatable ! used, tested ! Dimensions: 270 x 270 x 140 mm

Centering vise, centrifugal clamp PAGUS jaw width: 200 mm jaw height: 50 mm span: 0...200 mm on rotary table with graduation 360° rotatable used, tested ! Dimensions: 500 x 300 x 180 mm

Centering tip, lathe tip WMW ZN 206 ( ZN206 ) Ø 140 mm MK 6 used, tested ! Dimensions: 380 x 140 x 140 mm

x-travel:600 mm y-travel:700 mm z-travel:60 mm tool taper:SK40 magazine place:30 Stück table surface area:630 mm 5axis-CNC-Milling Machine Make: DMG Type: DMU 60 P YOM: 2004

Bridge type Machining Centre NICOLAS CORREA EURO 2000 - 18.000 rpm - capacity 2000x1250x650 mm, CNC SELCA 4045, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 2300x1000 mm, Longitudinal travel x axis: 2000 mm, Cross travel y axis: 1250 mm, Vertical travel z axis: 650 mm, Measurement system: HEIDENHAIN optical scales, Working feed x-y-z axes: 0 - 30.000 mm/1, Rapid feed x-y-z axes: 30.000 mm/1, Spindle taper type: HSK 63, Automatic tools change nr.: 40, Spindle speed: 0- 18.000 rpm, Spindle motor power: 20 Kw, Cnc: SELCA 4045, Approx net weight: 20.000 Kg, Accessories: through-spindle coolant, chip conveyor

x-travel:760 mm y-travel:760 mm z-travel:760 mm total power requirement:43 kW weight of the machine ca.:11,5 t dimensions of the machine ca.:2,7 x 4,73 x 2,87 m max. table loading capacity:500 kg

MAKA Systems GmbH Type: PA 37 Year of construction: 2006 Machining length: 11 m Operating hours: 23.792 Spindle exchange: 08/2018 MAKA CNC 5-axis machining center PA 37 for machining of aluminum profiles and (with clamping surface to be realized clamping surface) for aluminum sheets / plates. machining. Version with NC support crosshead positioning and with widened machine base frame to accommodate the required required drag chains, and with hydraulic workpiece clamping. Machine in travelling gantry design with drive on both sides (gantry drive). CNC-control BWO 930 in mobile operating- for 5-axis milling with RTCP function, memory 1 mB, with integrated PC with low power processor 1 GHz, hard disk 120 gB, with Windows-XP, 10 touch-screen display with touch-screen computer keyboard. Connections: 1 x VCS for screen, 4 x USB, 1 x mouse, 1 x keyboard, 1 x RS 232,  ...

2002 Deckel Maho DMU 50T still in use, can be viewed Find more here - .ucymachines/ Contact us at - sales@ucymachines

grinding diameter max.:400 mm max. width of grinding wheel:180 mm grinding range:2-100 mm total power requirement:24 kW weight of the machine ca.:3,2 t Out of valve production

x-travel:16000 mm y-travel:4000 mm z-travel:1600 mm

x-travel:700 mm y-travel:550 mm z-travel:500 mm tool taper:SK40 spindle speed max.:12.000 U/min Tool changer:30 fach electronic handwheel chip conveyor

2023 Haas UMC-500SS 5-axis vertical machining center Manufacturer: Haas Year: 02/2023 In production: 11/2023 X: 610 mm Y: 406 mm Z: 406 mm B: 120’ to 35-‘ C: 360’ Spindle speed: 12000 rpm Spindle taper: CT 40 Toolholders Vise Machine in very good condition, under power. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Siemens Sinumerik 828D control system with ShopMill Travel X/Y/Z: 1020 x 635 x 610 mm Spindle speed: 10,000 min-1 Tool magazine for 24 Wkz. SK 40 IKZ Conveyor Measuring Sensors

weight of the machine ca.:11,2 t one spindle

x-travel: 1250 mm mm y-travel: 1000 mm mm z-travel: 600 mm mm Control: total power requirement: 25 Kw kW weight of the machine ca.: t dimensions of the machine ca.: m Brand Tos Machine no F641 Type SPEEDtec CNC Brand Siemens CNC Type Sinumerik 840D Year of make 2009 X 1.250 mm Y 1.000 mm Z 600 mm Intake HSK 100 Engine power 25 kW Speed 12000 RPM Tool changer Number of pallets 4 Outgoing ram Including manuals Speed maximum 12.000 RPM Maximum pallet load 4.000 kg Chip transport Tool magazine positions: 2x 40 , HSK 100 4 tables, 1x 1.000 x 1.250mm / 3x 1.000 x 1.000mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Chiron Model: FZ15 S High Speed Year of Manufacture: 2007 Operating Hours: 48,000 h SINUMERIK 840 D - controlsystem Find more here - .ucymachines/ Contact us at - sales@ucymachines

turning diameter over bed:100 mm turning diameter over slide rest:70 mm turning length:80 mm total power requirement:1,0 kW weight of the machine ca.:0,5 t dimensions of the machine ca.:0,7 x 0,6 x 1,2 m facing lathe with manual feed, various accessories

turning diameter over bed:340 mm turning diameter over slide rest:190 mm turning length:700 mm spindle bore:50 mm shaving-spindle speed range:40 - 3.000 U/min dimensions of the machine ca.:2 x 1 x 1,6 m total power requirement:6 kW weight of the machine ca.:1,2 t

x-travel:1270 mm y-travel:460 mm z-travel:660 mm Machine hours: 58,355 Spindle speed: 8,000 rpm

Control Siemens Sinumerik 840D Bar passage 65 mm Speeds 5,000 min-1 2 x 12-speed revolver with attached revolver Competition. Turret 1 with Y-axis Parts collection facility Belt filter system Conveyor Bar loading magazine IRCO Profimat

bar material dia.: 75 mm max. max. swing dia.: 540 mm turning length: 650 mm control: FANUC Oi-TB machine weight ab.: 6.200 kg CNC Turning- and Milling Center | JOHNFORD - SL-50-CF-Y equipped with chip conveyor. Additional equipment: + C axis + Y axis + driven tools The machine is in good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SL 50 | SL50 | SL-50 CF Y | SL50 CF Y The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boring power:10 mm weight:590 kg connected load:2 kW dimensions::1500 x 1300 x 2300 mm

turning length:800 mm total power requirement:380 V weight of the machine ca.:1400 kg dimensions of the machine ca.:2200 x 1200 x 1300 m centre height:160 mm chucking diameter:150 mm

turning diameter over slide rest:280 mm turning length:4000 mm total power requirement:7,8 kW weight of the machine ca.:6 t dimensions of the machine ca.:5,9 x 1,9 x 1,40 m

HAAS VF-0 Vertical Machining Center YOM 1998 Table 660x356 mm X/Y/Z 508/406/508 mm Spindle speed 0-7500rpm Spindle motor 14.9kW Rapid feed rate 18m/min Tool Capacity 20 Max. part weight 340.3 kg Spindle taper BT40 Machine Weight 3175Kg Remark: The machine had worked small parts in the production of hunting and sporting rifles. Mechanically OK, Defective a cirquit board