tank used for sale

1000L Vessel - Dish Bottom Vertical stainless steel tank Manufacturer: BBG Diameter Approx 1200mm Overall height Approx 1900mm Side entry man way door with DIN 15 Male Sample Port and Sample Tap Cooling Jackets Insulated with stainless steel cladding CIP Arm with Spray Ball Bottom Central Outlet DIN 50 Male Racking Outlet DIN 25 Male Temp Probe Pocket 2 x Sight Glasses 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

1000l Vessel - Dish Bottom Vertical stainless steel tank Diameter Approx 1050mm Overall height Approx 1650mm Side entry manway door Single skin stainless steel 1.5" RJT Top and Bottom Fittings Sight Glass DIN 80 Top fitting for gas vent 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

Porter Lancastrian 1500L/10BBL Vessel - Second Hand Vertical stainless steel tank Manufacture: Porter Lancastrian Dished Top & Bottom Diameter Approx 1000mm Overall height Approx 2900mm Single Skin Stainless Steel Inlet 1" RJT Side Manway Sight Level Tube Front Sight Port 3 x Legs Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

Compressor tank OKS 553676 2,000 litres built in 2010, S/N 3.5360.30060, 11 bar, with oil water separator Aquamat CF75

Brewing Kettle /Hot water tank 75HL Vertical cylindrical stainless steel External cladding and insulation finished in riveted stainless steel Mounted on 4 stainless steel legs with adjustable feet Working Capacity 75HL Vessel is fitted with a Lanemark gas burner Vessel is fitted with a wedge wire floor for whole flower hop retention. Previous owner devised a successful method for using pelletized hops utilising an upstand on the central outlet below the wedge wire floor. For more information and more available stock please visit us at - advancedbrewing.co.uk

Equipment: Insulation, agitator,Condition: used,Volume: 60,000,Lower floor: flat bottom with slope,Design: upright,Standing shape: flat bottom,Insulation: available,Insulating sheath: hermetically welded,Material insulating jacket: stainless steel,Diameter inside: 3,500,Cylindrical height: 6,500,Total height: 7,200,Manhole / dome: in cylinder,Nameplate: No,Equipment: Ventilation/ventilation, crane eyelets,Outlet: available,Outlet : 80,Remarks: Container feet are spacers for the Substructure/foundation,last purpose: foodstuffs,material in contact with the product: V2A 1.4301 (AISI304),agitator:

Equipment: Agitator,Condition: used,Volume: 30.000,Design: upright,Base: feet,Number of feet: 3,Diameter outside: 3.200,Cylindrical height: 4.100,Total height: 6.400,Manhole / dome: in the cylinder, in the topbody,Type plate: No,Equipment: crane eyelets,Outlet: available,Last use: Foodstuffs,Material in contact with the product: V2A 1.4301 (AISI304),Power: 2.2 / 4.4,Speed: 15 / 31,Agitator: Inclined blade stirrer,Voltage: 400,Bottom bearing: Yes,Current interferer: No, Agitator arrangement: eccentric in the topsoil,Bottom bearing: No,Current interferer: No

Condition: used,Volume: 38,000,Shelves: clapper bottom,Design: standing,Stand shape: feet height adjustable,Number of feet: 4,Diameter outside: 2,800,Total height: 8,000,Manhole / dome: in cylinder,Nameplate: No,Equipment: Spray head, crane eyelets,Outlet: present,Outlet: 65,Last use: Foodstuffs,Material in contact with the product: V2A 1.4301 (AISI304),Floor bearing: No,Current interferer: No,Floor bearing: No,Current interferer: No

Equipment: Agitator,Condition: used,Volume: 40,000,Design: horizontal,Base: feet,Number of feet: 6,Diameter outside: 3,000,Cylindrical length: 5700,Total height: 4,500,Total length: 6,300,Nameplate: No,Equipment: Ventilation/venting, spray head, crane eyelets,Outlet: pipe end approx. 65mm,Last use: Foodstuffs,Surface outside: marbled,Material in contact with the product: V2A 1.4301 (AISI304),Manufacturer agitator: Stelzer,Power: 1.1 / 4,Speed: 480 / 980,Agitator: Propeller,Voltage: 380,Bottom bearing: No,Current interferer: No,Agitator arrangement: on the container,Manufacturer agitator:

Condition: used,Volume: 37,000,Design: upright,Stand shape: feet height adjustable,Number of feet: 6,Diameter outside: 3,400,Cylindrical height: 4,000,Total height: 5,400,Manhole / dome: in cylinder,Nameplate: No,Equipment: Ventilation/venting, Spray head, Crane eyelets,Outlet: available,Outlet: 80,Last use: Foodstuffs,Material in contact with the product: V2A 1.4301 (AISI304),Floor bearing: No,Current interferer: No,Bottom bearing: No,Current interferer: No

Equipment: Agitator,Manufacturer: Möschle Behälterbau,Condition: used,Volume: 40,000,Specific gravity of the medium: 1.35,Bottoms: clapper bottom,Design: upright,Stand shape: feet,Number of feet: 5,Diameter outside: 2,800,Cylindrical height: 5,750,Total height: 7,490,Technical documents: Drawing,Manhole / dome: in cylinder (approx. 340 x 440 mm),Type plate: Yes,Equipment: Spray head, crane eyelets,Outlet: available,Outlet : 65,last purpose: foodstuffs,Manufacturer agitator: DENK Mixing Technology,Power: 1.8 / 8.4,Speed: 470 / 960,Agitator: Propeller,Voltage: 400,Bottom Bearing:

Equipment: Insulation,Manufacturer: Alfa Laval,Condition: used,Volume: 50,000,Lower bottom: conical bottom,Design: standing,Stand shape: feet height-adjustable,Number of feet: 6,Insulation: available,Insulating jacket: hermetically welded,Material insulating jacket: stainless steel,Diameter inside: 3,350,Cylindrical height: 5,500,Total height: 7,700,Manhole / dome: in cylinder,Type plate: No,Equipment: Ventilation/ventilation, crane eyelets,Outlet: present,Last use: food, Material in contact with the product: V2A 1.4301 (AISI304),Bottom bearing: No,Current interferer: No,Floor bearing: No,Current interferer: No

Equipment: Overpressure,Manufacturer: ADF Apparatebau Freudenberg,Condition: used,Volume: 37,100,Max. overpressure: 5.0,Max. permissible Operating temperature : 90,Shelves: clapper bottom,Design: upright,Stand shape: feet,Number of feet: 4,Diameter outside: 3,200,Cylindrical height: 3,500,Total height: 6,200,Manhole / dome: in the cylinder, in the topcase,Type plate: Yes,Equipment: Crane eyelets,Outlet: available,Remarks: Filter plate welded in inside (see pictures),Material in contact with the product: V4A 1.4571 (AISI316),Floor bearing: No,Current interferer: No,Floor bearing: No,Current interferer: No

Equipment: Insulation, Agitator,Manufacturer: Alfa Laval,Condition: used,Volume: 40,000,Design: upright,Standing form: Standing frame,Insulation: available,Insulating jacket: hermetically welded,Insulation material: Cork,Material insulating jacket: Stainless steel,Diameter outside: 3,050,Cylindrical height: 6,000,Total height: 8,300,Wall thickness underbody: 3,Wall thickness cylinder: 2.5,Wall thickness upper floor: 4.5,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Ventilation/ventilation, crane eyelets, Spout: available,Spout : 100,Remarks: Stand frame reinforced with concrete (see pictures),last use:

Equipment: Overpressure, Vacuum,Manufacturer: Gebr. Schmeck Siegen,Condition: used,Volume: 50,000,Vacuum: 1.0,Max. overpressure: 3.2,Max. permissible Operating temperature : 200,Shelves: clapper bottom,Design: upright,Stand shape: feet,Number of feet: 4,Diameter inside: 3,600,Cylindrical height: 4,050,Total height: 6,000,Manhole / dome: in the cylinder, in the top floor,Type plate: Yes,Equipment: Crane eyelets,Outlet: Flange DN100,Remarks: Steel feet cut off below the mounting flange (see pictures) Inside with reinforcement rings (see pictures),Last use: Chemical,Material in contact with the product: V4A

Equipment: Insulation, agitator,Condition: used,Volume: 100,000,Lower bottom: conical bottom,Design: upright,Standing form: Standing frame,Insulation: available,Insulating jacket: hermetically welded,Material insulating jacket: Stainless steel,Diameter inside: 3,600,Total height: 12,300,Manhole / dome: in cylinder,Nameplate: No,Equipment: Ventilation/ventilation, crane eyelets,Remarks: Underbody outside insulated with PU foam (see pictures),Last use: Food,Material In contact with the product: V2A 1.4301 (AISI304),Agitator: Propeller,Bottom bearing: No,Current interferer: No,Agitator arrangement: lateral

Equipment: Overpressure, Vacuum,Manufacturer: Industrietechnik Ambs,Condition: used,Volume: 50,950,Vacuum: 1.0,Max. overpressure: 3.0,Max. permissible Operating temperature : 200,Shelves: clapper bottom,Design: upright,Stand shape: feet,Number of feet: 4,Diameter inside: 3,600,Cylindrical height: 4,100,Total height: 6,000,Manhole / dome: in the cylinder, in the top floor,Type plate: Yes,Outlet: flange,Outlet : 100,Remarks: Steel feet cut off below the mounting flange (see pictures),Last use: Chemical,Material in contact with the product: V4A 1.4571 (AISI316),Material feet: Steel,Bottom bearing:

Equipment: Heatable/coolable, Overpressure, Vacuum,Condition: used,Volume: 33.725,Vacuum: 1.0,Max. overpressure: 6.0,Max. permissible Operating temperature : 140,Specific gravity of the medium: 1.9,Design: upright,Stand shape: feet,Number of feet: 4,Heating/cooling (filter bar): available,Volume double jacket: 420,0,Max. permissible Operating overpressure: 4.0,Max. permissible Operating temperature : 140,Temperature control cylinder: half tube coil,Temperature control underbody: half tube coil,Diameter inside: 2,400,Total height: 8,850,Technical documents: drawing, various documents,Manhole / dome: in the cylinder, in the top floor (DN

Equipment: Insulation, agitator,Condition: used,Volume: 120,000,Lower floor: flat floor with slope,Design: upright,Standing form: Stand frame,Insulation: available,Insulating jacket: hermetically welded,Diameter inside: 3,650,Cylindrical height: 11,500,Total height: 12,860,Manhole / dome: in cylinder,Type plate: No,Equipment: Ventilation/ventilation, crane eyelets,Remarks: Insulating cladding and insulation in the area of the stand frame plus 30 cm above it removed (see pictures),last Intended use: Food,Material in contact with the product: V2A 1.4301 (AISI304),Power: 1.0 / 4.4,Speed: 470

Equipment: Insulation, agitator,Manufacturer: Thrun Maschinen- und Behälterbau,Condition: used,Volume: 113,000,Design: upright,Stand form: Stand frame,Insulation: available,Insulating jacket: hermetically welded,Insulation material: PU foam,Material insulation jacket: stainless steel,Diameter inside: 3,750,Cylindrical height: 11,700,Total height: 13,000,Technical documents: Drawing,Manhole / dome: in the cylinder,Type plate: No,Equipment: Ventilation/ventilation, spray head, crane eyelets, Outlet: available,outlet : 80,last use: foodstuffs,agitator: propeller,bottom bearing:

Equipment: Insulation, agitator,Manufacturer: Ahlborn,Condition: used,Volume: 110,000,Lower floor: flat floor with slope,Design: upright,Standing form: Stand frame,Insulation: available,Insulating jacket: hermetically welded,Material insulating jacket: Stainless steel,Diameter inside: 3,484,Cylindrical height: 13,330,Total height: 14,550,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Ventilation/ventilation, crane eyelets,Remarks: Ladder included,Last purpose: Foodstuffs,Material in contact with the product: V2A 1.4301 (AISI304),Agitator: Propeller,Bottom bearing: No,Current interferer:

Equipment: Agitator,Condition: used,Volume: 39,000,Design: upright,Standing shape: Feet height adjustable,Number of feet: 6,Diameter outside: 3,200,Cylindrical height: 4,750,Total height: 5,800,Manhole / dome: in the top floor,Type plate: No,Equipment: Ventilation/venting, crane eyelets,Outlet: available,Outlet : 50,Remarks: 1 container without ventilation hood,Last purpose: Foodstuffs,Material in contact with the product: V2A 1.4301 (AISI304),Manufacturer agitator: Stelzer,Power: 5, Speed: 980,Agitator: Propeller,Voltage: 380,Bottom Bearing: No,Current Jammer: No,Agitator Arrangement: Laterally

500 litre, Stock number: T4031, Litre: 500, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Bottom: Conical, Double jacket: Yes, Insulated: Yes , Outer cladding: Fully welded stainless, Tank cover: Half hinged lid, Agitator: Yes, 2 pcs., Agitator type: Anchor with scrape and propeller, Agitator placement: From the top, Motor Anchor: 0,55 kW - 230/400 Volt - 25 rpm., Motor Propeller: 1,5 kW - 220/380 Volt - 925 rpm., Inner diameter: Ø 800 mm., Outer diameter: D 920 mm., Total height: H 2000 mm., Manufacturer: Kofa, Year: 1998

1.500 litre, Stock number: T4016, Litre: 1.500, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 5 pcs., Item: Tank, Standing: 3 pcs. legs, Top: Conical, Bottom: Conical, Tank cover: In the top, Ø 400 mm., Inner diameter: Ø 1100 mm., Total height: H 2280 mm.

22 L tank, with lance. Never used Overall dimensions: 330 x 330 x 1000 mm Weight: 8 kg Auction-ID: A7-45834-238

Tank comes from Linde H30T model 392, suitable for every model 391, 392 and 393 from Linde. Loading onto trucks no problem Auction-ID: A1-45450-1021

Dimensions: - Width: 1750 mm - Depth: 1500 mm - Height: 2400 mm (without base) Equipment : - Rectangular manhole 320 x 420 mm - Remaining drain NW40, Fredrich - Clarification drain NW40, Fredrich - Sampling - Stand display - Upper door 320 x 420 mm - Connection for ventilation

EXCLUDING INTESTINES Including blue drag hoses (rear part) - Working width: 650cm Pump overhauled several years ago! Last 10 years only used with water Auction-ID: A3-43516-13004

Dimensions: - Width: 1500 mm - Depth: 1500 mm - Height: 2400 mm (without base) Equipment : - Rectangular manhole 320 x 420 mm - Remaining drain NW40, Fredrich - Clarification drain NW40, Fredrich - Sampling - Stand display - Upper door 320 x 420 mm - Connection for ventilation

22 L tank, with lance. Never used Overall dimensions: 330 x 330 x 1000 mm Weight: 8 kg Auction-ID: A7-45833-238

Cooling ONI year 2014 2 plastic tanks 2,000 l, 4 feed pumps KSB, control Siemens Simatic

300 litre, Stock number: T4029, Litre: 300, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Open top with lid, Bottom: Plain sloping, Inner diameter: Ø 625 mm., Total height: H 1200 mm., Manufacturer: Jahala Rustfrit stål, Model/type: JBT-300

Diesel IBC storage tank mobile, with hose and automatic filling nozzle, tank gauge, lockable cap, valve cylinder, lashing strap securing brackets, 200L Auction-ID: A3-43515-5928

For sale is a used CEMO spray system with a 500 liter tank (suitcase-shaped, with steel runners). The system is expressly sold as defective or as a spare parts donor. Details: • Manufacturer: CEMO • Tank volume: 500 litres • Year of manufacture / inspection: 2023 (see nameplate) • Incl. pump, control system (HCW City Sprayer / epoke), valves and attachments • Electrical components available Condition: • Significant signs of wear and dirt • Partly heavy rust on pump and metal parts • Functionality not tested / presumably limited • Fuel cap is missing • Sold only for cannibalization or as a spare parts carrier Auction-ID: 04F-QBK-2

500 litre, Stock number: T4032, Litre: 500, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Bottom: Conical, Double jacket: Yes, Insulated: Yes , Outer cladding: Fully welded stainless, Tank cover: Half hinged lid, Agitator: Yes, 2 pcs., Agitator type: Anchor with scrape and propeller, Agitator placement: From the top, Motor Anchor: 0,55 kW - 230/400 Volt - 56 rpm., Motor Propeller: 1,1 kW - 220/380 Volt - 1080 rpm., Inner diameter: Ø 800 mm., Outer diameter: D 920 mm., Total height: H 2000 mm., Manufacturer: Kofa

For sale are 2 agitator tanks from the manufacturer Gruss. The tanks were previously used in a food factory and are in pristine condition. Technical data: Manufacturer: Gruss Capacity: 5.000 Ltr. Year: 2011 Dimensions: Height: approx. 4.20m Diameter: approx. 1.90m Material: 1.4301 If you have any questions, please feel free to contact us.

Small tank; 500 litres of roto; 115x85x100cm Large tank; 200x90x170cm Auction-ID: A1-40105-97

Equipment: Vacuum,Condition: Used,Volume: 27.300,Vacuum: 0.6,Max. permissible Operating temperature : 50,Design: upright,Stand shape: feet,Number of feet: 3,Diameter inside: 2,800,Wall thickness shelves: 8,Wall thickness cylinder: 7,Technical documents: Drawing,Manhole / dome: in the cylinder, in the top floor,Type plate: Yes,Outlet: available,Remarks: Wall thickness of the underbody at the upper container 11 mm,Last purpose: Pharmaceutical chemistry,Material in contact with the product: V2A 1.4301 (AISI304),Material feet: Stainless steel,Bottom bearing: No,Current interferer: No, Bottom Bearings: No,Power Interferers: No

Equipment: Insulation, agitator,Manufacturer: Ritter Behälterbau Hildesheim,Condition: used,Volume: 130,000,Lower floor: flat floor with slope,Top floor: conical bottom,Design: upright,Standing shape: Stand frame,Insulation: available,Insulating jacket: hermetically welded,Diameter inside: 3,400,Diameter outside: 3,500,Cylindrical height: 16,500,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Ventilation/ventilation, crane eyelets,Remarks: Stand frame made of V2A,last Intended use: Food,Material in contact with the product: V2A 1.4301 (AISI304),Agitator: Propeller,Bottom bearing: No,Current interferer:

Manufacturer: Inox Maurer AG,Condition: used,Volume: 25,000,Max. max. Operating temperature : 50,Design: upright,Stand shape: feet,Number of feet: 3,Diameter inside: 2.600,Total height: 5.900,Wall thickness shelves: 6.9,Wall thickness cylinder: 6,Technical documents: Drawing, various documents,Manhole / dome: in the cylinder, in the top floor,Type plate: Yes,Equipment: Crane eyelets,Outlet: available,Note: Manhole cover plated,Remarks: Test truck + 4 bar,Last purpose: Pharmaceutical chemistry,Material in contact with the product: V2A 1.4301 (AISI304),Material Feet: Steel,Bottom Bearings:

Bright Beer & Fermentation Tanks Speidel 3 x 625 liters Top condition, vertical stainless-steel bright beer and fermentation tanks, made by Speidel in year 2019. Tank side walls are double jacketed which can be connected to a cold-water source for a product temperature control. Technical characteristics Manufacturer Speidel GmbH, Germany Manufacturing year 2019 Manufacturer’s type BBT FD-082-S Tank volume 625 litres Number of tanks 3 pcs Tank material Stainless steel 1.4301 (AISI 304) Cooling jackets Tank side Tank outside diameters 820 mm Tank height 1660 mm Tank empty weight 80kg

Bright Beer & Fermentation Tanks Speidel 3 x 625 liters Top condition, vertical stainless-steel bright beer and fermentation tanks, made by Speidel in year 2019. Tank side walls are double jacketed which can be connected to a cold-water source for a product temperature control. Technical characteristics Manufacturer Speidel GmbH, Germany Manufacturing year 2019 Manufacturer’s type BBT FD-082-S Operating pressure 1.2 bar Tank volume 625 litres Number of tanks 3 pcs Tank material Stainless steel 1.4301 (AISI 304) Cooling jackets Tank side Tank outside diameters 820 mm Tank height 1660 mm Tank empty weight 80kg

New 25.000 litre tank, Stock number: T25B4-1, Litre: 25.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 4 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the top, Ø 500 mm., Pipes: Top Ø 1½ og Ø 4 - Bund Ø 2½, Inner diameter: Ø 2600 mm., Cylinder: H 4500 mm., Total height: H 5627 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 3.000 litre tank, Stock number: T3B4-1, Litre: 3.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 3 pcs. legs, Top: Conical 15°, Bottom: Conical 15°, Tank cover: In the top, Ø 450 mm., Pipes: Top Ø 1 and Ø 4 - Bottom Ø 2, Inner diameter: Ø 1560 mm., Cylinder: H 1500 mm., Total height: H 2162 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 3.000 litre tank, Stock number: T3B6-1, Litre: 3.000, Material: Stainless acid proof steel AISI 316, Item: Tank, Standing: 3 pcs. legs, Top: Conical 15°, Bottom: Conical 15°, Tank cover: In the top, Ø 450 mm., Pipes: Top Ø 1 and Ø 4 - Bottom Ø 2 , Inner diameter: Ø 1560 mm. , Cylinder: H 1500 mm., Total height: H 2162 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0-+50°C., Density: 1,0, Working pressure: None, Manufacturer: Handing

New 25.000 litre tank, Stock number: T25B6-1, Litre: 25.000, Material: Stainless acid proof steel AISI 316, Item: Tank, Standing: 4 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the top, Ø 500 mm., Pipes: Top Ø 1½ and Ø 4 - Bottom Ø 2½ , Inner diameter: Ø 2600 mm., Cylinder: H 4500 mm., Total height: H 5627 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

Fliegl PFW 16000 – Slurry tanker 16,000 l with dribble hose distributor General data • Machine type: Slurry tanker • Manufacturer: Fliegl Agrartechnik GmbH • Model: PFW 16000 • Year of construction: 2019 • Capacity: 16,000 l • Permissible Total weight: 23,000 kg • Condition: used Technical equipment • Tandem axle • Air brake system • Tyres: 750/60 R 30.5 • Hydraulic drawbar suspension • Suction connection 6\" left and right with automatic hydraulic shut-off • 4,000 l Armatec pump • Drag hose distributor \"Skate 150\" • Working width: 15 m • Distributor with half-side switch • Piano controls available Condition • Optical condition: used, usual signs of wear present • Technical condition: functional • Ready to use Powerful slurry tanker with modern spreading technology and high efficiency – ideal for efficien ...

Equipped with: Stainless steel storage silo ± 9.05 m³, conical bottom – Ø 2,400 mm, year of construction: 1987, serial number: 200-450-307/154, max. Operating pressure: 3 bar, max. operating temperature: 200°C, approval: TÜV DB 81/2, stainless steel standing storage silo with conical bottom, placed on four stainless steel legs, diameter: 2,400 mm, cylindrical height: 1,500 mm, cone height: 1,100 mm, top part (hood): approx. 0.60 m³, total capacity: ± 9.05 m³, outlet: Ø 70 mm, manhole cover with toggle closures, vent / safety valve available, standing model on 4 legs. Auction-ID: A1-41993-45

Vacuum pump on a sled; tanker without chassis Auction-ID: A1-40135-205

With pallet; Auction-ID: A1-45925-3