93.7 kW, MTA chiller air-cooled, type: Taurus TAN 094 M.T.A. S.p.a..
Taurus TAN 094N are compact water chillerss, which are suitable for outdoor installation up to-20 °C inclusive with hydronic Kit (tank + pump) for ...
93.7 kW, MTA chiller air-cooled, type: Taurus TAN 094 M.T.A. S.p.a...
Taurus TAN 094N are compact water chillerss, which are suitable for outdoor installation up to-20 °C inclusive with hydronic Kit (tank + pump) for low outdoor temperature. with electronic Fan speed control..
Cooling capacity kW 93.7.
Water temp. Exit entry: 7 12 °C.
Flow rate m³h 24.3.
Ambient temperature °C 35.
Refrigerant R 407C..
Voltage V 400, frequency Hz 50, stages of pH 3.
Maximum power consumption (kW) 44.
Max current (A) 76.
Starting current circle (A) 199.
Protection class: IP54.
Length mm 2477, width mm 1110, height 2120 mm.
Weight kg 1047.
Connection RP 2 12 ".
Serial No.: 2200080824.
Built in 2006, condition: Optical 3, technically 2-3.
Used machines can have Visual defects due to their use..
(Subject to change and prior sale reserved!).
Location: MTA Deutschland GmbH, 41334 Nettetal.
Price: On request (excl. VAT from Nettetal), 0 months warranty.
Chillers, heat pumps, chiller, MTA.
Screw compressor station, complete system - little up
Delivery quantity 1090 L min
Pressure 10 bar
motor 7,5 KW
Tank 250 liters
Refrigerant dryers built
T. 0171 721 2068
Screw compressor station, complete system - little up.
Delivery quantity 1090 L min.
Pressure 10 bar.
motor 7,5 KW.
Tank 250 liters.
Refrigerant dryers built.
T. 0171 721 2068.
Working width: 710 mm
Brush speed: 250 RPM
Fuel tank capacity: based on 115 ltr. Fresh dirt
maximum speed: 6.7 km h
Battery: 36 Volt - good condition
Weight: approx. 650 kg
Working width: 710 mm.
Brush speed: 250 RPM.
Fuel tank capacity: based on 115 ltr. Fresh dirt.
maximum speed: 6.7 km h.
Battery: 36 Volt - good condition.
Weight: approx. 650 kg.
Battery - charger.
All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake..
Each party has the possibility of the seat up - abrasion - suction machine before making a purchase in our factory to test..
1 half automatic working Cryovac round table packaging machine
1 Cryovac round table packaging machine
Series No. G 1959
with 5 vacuum ...
F 104 .
1 half automatic working Cryovac round table packaging machine.
Pos. 1 .
1 Cryovac round table packaging machine.
Series No. G 1959.
manufacturer year: .
with 5 vacuum chambers.
for packaging size from 700 g to 2 kg.
storage place: 1,70 m x 2,30 m.
with suction of plastic foil parts in a round .
with 1 vacuum producing Busch pump .
with 1 plastic chain links conveyor, .
length 80 cm with motor drive.
1 belt conveyor to transport the closed .
packaging to the shrinking tunnel.
1 Cryovac shrinking tunnel.
Manufacturer is Cryovac.
Type STBW 6090.
Mach. No. 72CJ 1442.
with 35 kW for hot water production.
with one steam exhauster with a .
rown plastic pipe.
to the roof.
length 88 cm, breadth 1,20 m, .
igh is 1,10 m.
1 conveyor to connect Pos. 3 with Pos. 5.
length 43 cm.
1 Cryovac drying and cooling machine.
to dry the humidity from the plastic bags.
and to cool down the content of the plastic bags.
Manufacturer is Multivac Sepp Hagenmüller.
Mach. No. 103969.
Type TE 100.
length 1,00 m, breath 95 cm, high 1,10 m.
with 1 roller conveyor in the output of the dryer plant.
Price up standing point: 9.000,00 Euro.
Hot glue, glue melter HHS, type HMP 06-1x2 M machines no. 470203118158
Melting tank coated aluminium,
Tank contents 6 kg
Melting capacity 7 kg h
Hot melt glue pellets, or block hose connections of max 2 pieces temp ...
Hot glue, glue melter HHS, type HMP 06-1x2 M machines no. 470203118158.
Melting tank coated aluminium,.
Tank contents 6 kg.
Melting capacity 7 kg h.
Hot melt glue pellets, or block hose connections of max 2 pieces temperature control 5-channel control.
Maximum setting temperature 200 ° C.
Supply pressure min. 6 bar bypass, adjustable maximum 80 kW bar connection value 4 weight approx. 30 kg site 32683 Barntrup (errors and omissions in the technical data as well as subject to prior sale).
1 culture dosing room, covered with sterile air,
dismantling is possible
a.) 1 sterile air production plant, installed in a stainless steel cabinet
int. No. PAL 4.6
is installed in a stable wall c ...
H 102 .
1 culture dosing room, covered with sterile air, .
dismantling is possible.
a.) 1 sterile air production plant, installed in a stainless steel cabinet.
int. No. PAL 4.6.
is installed in a stable wall construction.
Sterile culture working place.
enclosing with small walls and with a Laminarflow roof .
The milk, which is prepared for the soft cheese ripening in tanks.
is flow through a milk pipe directly through the sterile culture .
Here was vaccinate by hand the culture and rennet in the .
skim milk what is flow through the pipe into the ripening tank.
The frozen culture was delivered in a sterile plastic bag and .
this bag was installed on the culture emptying pipe end..
To fill the great ripening tank with milk needs 3 hour, enough time .
to dose the culture and rennet in the pipe in the sterile room..
The room existing about removable walls an d 1 door..
Size: 2,5 m x 1,8 m; high 2,80 m.
Price up standing point: 2.300,00 Euro.
Machine no. P53059
Working methods for the processing of PUR adhesive and EVA glue edges material PVC, solid wood
To glue er thickness 0,2-20 mm
Width min 60; Length min. 150 mm
Height min. 10 ...
Machine no. P53059.
Working methods for the processing of PUR adhesive and EVA glue edges material PVC, solid wood.
To glue er thickness 0,2-20 mm.
Width min 60; Length min. 150 mm.
Height min. 10 mm, 60 mm quick heating pool melt-Matic.
with automaticher DC and counter running control of the glue roller.
Pressure zone 1 x pressure roller, 6 x rollers.
Feed 8-24 m min, stepless.
Heated infeed fence spray.
Release agent is applied before the trimming unit up and down on the work piece. The adhesive can no longer adhere to these surfaces facilitating the work piece cleaning.
Detergent is sprayed Schwabbelaggre-gat up and down before on the workpiece around the edges of.
Anti-static coolant is sprayed after gluing of edge tape directly on the joint and on the edge tape.
2 motors in the equal and opposite working, automatically controlled.
Automatic edge magazine.
for the Automatic Strip edge feeder.
Automatic reel magazine caps scissors for edges of the role.
Doppelkappaggregat K-17 front and rear 2 x 0,6 kW, Tiltable 0-20 °.
Bündigfreäsaggregat updown 2 x 1,9 kW; 1200015000Upm 200250 Hz.
Chamfer milling unit updown with auto chamfer thickness adjustment.
2 x 0, 75 kW; 250 Hz, Tiltable 0-45 °.
RADIUS milling unit topbottom 2 x 0, 4 kW; 13800 rpm, spindle tilt 25°.
Nutagreggat 3.5 kW; 8800 rpm, 150 Hz, swiveling 90°.
Corner rounding unit AR 4.
Top front and rear bottom front and rear 4 x 0, 35 kW; 10900 rpm, 200 Hz.
Profile scraping unit for removing the rounded Kunstoffkanten, zweiseting non-detenting, auto heading to.
Flat scraping with fine button device for the Restschmelzklebr rentfernung in the joint area.
Edge cleaning unit KE-PURbottom 2 x 0,8 kW; 1450 RPM.
Including external melting unit multi-melt - tank location with level sensor in the CombiMelt type CMTA year: 2006.
Max. Temperature heating hopperhose 230 ° C.
Time monitoring 15 min.
Tank content 2 kg.
Minmax amount of subsequent pumps in manual mode 50500 grams.
Max.Nachpumpemenge of the secondary pump automatic 200 grams.
Minmax glue temperature input 140160 ° C..
Motor 3 kW.
Supply channel with tube.
to feed a PUR adhesive external tank system.
Total connected load 26 kW.
Machine length 11200 mm.
Machine width 960 mm.
Machine height 1420 mm.
Weight 5500 kg.
Site D-32683 Barntrup.
Changes and errors in the technical data, as well as subject to prior sale).
1 CIP plant with 3 CIP pressure lines
Manufacturer is Com,p. Muggli Germany
manufacturer year is 2009
Rectangular constructed tanks
1 x 3.000 for fresh water
1 x 6.000 l for pre ...
E 106 .
1 CIP plant with 3 CIP pressure lines.
Manufacturer is Com,p. Muggli Germany.
manufacturer year is 2009.
Rectangular constructed tanks.
1 x 3.000 for fresh water.
1 x 6.000 l for pre rinsing water .
2 x 6.000 Lye and .
1 Tank with 6.000 l for acid.
2 detergent concentrate container connection possibilities.
to bring the concentrate of lye and acid solution automaticly .
to the cleaning concentration.
3 disinfection concentrate container connection possibilities.
to bring automaticly in the 3 CIP pressure way the needed.
disinfection detergent during the water rinsing..
3 pipe heat exchanger to heat up the cleaning solution.
during the CIP circulation automaticly to the right .
temperature with steam and condensate tap technique .
2 pipe connection plates with Ini control to extent.
the existing 3 CIP pressure ways with pipe connection .
the possibilities to more CIP circulations ways. .
1 Siemens S 7 automatic control system for the .
whole CIP plant..
Price up standing point: 54.000,00 Euro.
1 round Alfa Laval tank, standing on 3 feet
fabrication No. 1517380
man hole in the top, without stirrer
isolated, diametre is 1,65 m
manufacturer is 1998
content 3.000 l
Price up standing point: ...
B 126 .
1 round Alfa Laval tank, standing on 3 feet.
fabrication No. 1517380.
man hole in the top, without stirrer.
isolated, diametre is 1,65 m.
manufacturer is 1998.
content 3.000 l.
Price up standing point: 1.800,00 Euro.
1 standing sugar silo store tank
dismantled, content approx. 35.000 l
complete constructet outr of stainless steel
int. No. LSA-T 20
int the top with hand rails and an air vent
outlet in the mi ...
B 125 .
1 standing sugar silo store tank.
dismantled, content approx. 35.000 l.
complete constructet outr of stainless steel.
int. No. LSA-T 20.
int the top with hand rails and an air vent.
outlet in the middle with strong conical bottom.
is standing on 4 stable round feet.
Diameter of the tank is 2,40 m.
outlet in the middle with NW 80.
Price up standing point: 3.300,00 Euro.
1 VA-activated charcoal filter brand EUWA, total content 5,770 l
Brand: Euwa H.H Eumann GmbH
Year of construction: 1988
Performance: approx. 30 m ³h (depending on the intended use m ...
1 VA-activated charcoal filter brand EUWA, total content 5,770 l.
Brand: Euwa H.H Eumann GmbH.
Year of construction: 1988.
Performance: approx. 30 m ³h (depending on the intended use more).
Total content: 5,770 l.
Net capacity: 4.000 l.
Operating pressure: 6 bar.
Mass tank: diameter. = 1.60 m H frame = 2.50 m H tank = 3,20 m H ges. = 3.55 m (without buffer).
Connections: 1 rest outlet diameter. internal = 110 mm flanged (bottom middle).
1 inlet diameter. inner = 170 mm flange (top frame) -..
Intake tube, diameter inside. 0.39 m, with VA sieve.
1-port above middle diameter. internal = 38 mm flange.
2 flanged manhole covers: closed 20 screws.
2 manholes: Diameter. outside = 0,645 m diameter. internal = 0.50 m 2 cover: material thickness 24 mm, diameter. outer 0,645 m with 20 holes, dia. =. .
22 mm bolt circle diameter 600 mm.
2 flange: Diameter. outside = 0,645 m diameter. internal = 0,495 m.
Flange width 75 mm with 20 holes, diameter. 22 mm bolt circle diameter 600 mm.
The two seals for the manhole covers must be bought new..
Floor nozzle: Diameter. approx. 1.58 m with removable center plate, diameter. = 0.59 m.
Jets: bolted a 120 piece in nozzle plate stainless steel nozzle diameter. = 50 mm.
Each nozzle has 4 holes with a diameter of about 3 mm each..
The nozzles are arranged in circular.
in circles with 34 + 28 + 23 + 17 + 11 + 6 + 1 nozzle..
Other: with 3 crane eyelets top.
TÃ?V Inspection Manual: a test log book for the tank does not exist at the time..
We reserve the right to make changes, misapprehensions and sale..
Terms of payment: 100% prepayment or cash on collection..
Terms of delivery: from site Maxhütte free recharge truck dispatch through forwarding is possible at home and abroad, exact additional cost for this on request.
A 1 130
One with steam directly heating UHT plant
is standing on a frame
place: 6 m x 4 m
Manufacturer year is 2003
with balance tank
with electronic cabinet, flanged to the big frame
but is standing on ...
A 1 130 .
One with steam directly heating UHT plant.
is standing on a frame.
place: 6 m x 4 m.
Manufacturer year is 2003.
with balance tank.
with electronic cabinet, flanged to the big frame.
but is standing on own feet.
with 2 equal constructed energy converter.
int. M2M5 and a small one, No. M9.
Type label information from the electronic cabinet.
Type:VIHS 100 PII.
Mach. No. T5844230056.
1 Alfa Laval plate heater with 3 plate sections .
with a second frame, installed there the complete .
steam injection ans flash detentecooler system .
to make sure, that the water content in the milk after .
heating is the same as to begin..
with 1 Alfa Laval centrifugal pump for product.
with a balance tank .
int. No. LS04.
1 detente process tank.
and with a second Alfa Laval centrifugal pump, 17 kW.
1 balance tank with 1 pump.
Between the second stainless steel frame is standing .
a plate heater, on both side covered with stainless steel plates.
manufacturer year 2003.
Sure to 16 bar pressure , max. 22,9 bar.
1 Rannie Homogenisiermaschine.
Type: Blue Top 50-5880.
Manufacturer year: 1997.
Machine No. 4734.
capacity: 7.500 lh.
pressure until to 400 bar.
Price up standing point: 124.000,00 Euro.
A 1 119
milk pasteur line No. 3 with 35.000 lh
with 1 Westfalia milk separator and
with 1 Westfalia Bactofuse
1 Westfalia milk separator
Modell MSD 200-01 076,
A 1 119 .
milk pasteur line No. 3 with 35.000 lh.
with 1 Westfalia milk separator and .
with 1 Westfalia Bactofuse.
1 Westfalia milk separator.
Modell MSD 200-01 076, .
No. 10829688 .
manufacturer year: .
capacity is 35.000 lh.
reconditioned from Comp Winkelhorst.
with cream flow meter with a glass measurement.
with 1 closed and round separator sludge.
balance tank and with 1 centrifugal pump.
manufacturer is KBA Artern..
1 Westfalia Bactofuse.
capacity is 35.000 l h.
manufacturer year is 1990.
1 Alfa Laval plate heater.
Type Ronts 10 RH.
No.. 30107 18566.
manufacturer year is 2010.
pressure proved until to 17,2 bar.
available is 1 hot water plate secrion.
1 big heat exchanger section and.
1 smaller plate section for heating .
piping in DN 100.
Verrohrung in NW 100.
1 slimmy balance tank, high 2,2,m.
with a centrifugal pump and.
with 1 Alfa Laval centrifugal pump.
1 Alfa Laval hot water circulation system.
with a Alfa Laval hot water pump and with a small.
plate heater, covered with a fender, blue painted..
with 2 condensate tap..
Price up standing point: 128.000,00 Euro.
A 1 118
Milk plate heater line No. 2
1 Westfalia separator, capacity 25.000 lh
manufacturer year: 1994
with a closed sludge drainage tank
with pressed water supply for the separator drum
1 smal wall e ...
A 1 118 .
Milk plate heater line No. 2.
1 Westfalia separator, capacity 25.000 lh.
manufacturer year: 1994.
with a closed sludge drainage tank.
with pressed water supply for the separator drum.
1 smal wall electric cabinet for the water vale control.
1 small pump to emptying the sludge balance tank.
manufacturer is KBA, Artern, 2 m³ per hour.
Near by the separator is standing .
A small, closed balance tank.
with a manhole in the top.
D= 80 cm, high 1,70 m.
with a big pipe sieve in DN 200 with a KBA centrifugal pump.
capacity is 35.000 l per hour and.
with 1 IDM flow meter installation.
1 Alfa Laval plate heater .
Type Pronds 8-RM.
manufacturer year is 2010.
pressed sure until to 14,3 bar.
2 equal round, closed balance tanks.
D= 80 cm, high 1,20 m.
content approx. 200 litre of each one.
with 1 Alfa Laval centrifugal pump, int. mark PU 5.
1 centrifugal pump manufacturer is KBA.
int. mark: 2 PU01.
with an IDM flow meter.
1 rectangular installed Gully with 5 pipe end.
On the gable end of the Alfa Laval plate heater are standing.
2 complete hot water circulation systems.
one for milk heater, one for crem plate haetaer.
1 Alfa Laval cream plate heater.
int. mark CCP 2.4 Rahmerhitzer 2.
with luke warm water utilization.
and 2 hot water circulation systek are available.
with 5 plate sections and with big plate outlets.
but small piping after the outlet in DN 50.
2 product pumps, int. mark: .
PU 02 PJ 02 und PU 03 Milchseite.
Price up standing point: 95.000,00 Euro.
A 1 117
milk plate heater plant No.1
1 round balance tank, closed
d= 1,00 m, content 250 litre
1 centrifugal pump with manual butterfly valves
1 pipe sieve in DN 80
1 plate heater, in ...
A 1 117 .
milk plate heater plant No.1.
1 round balance tank, closed.
d= 1,00 m, content 250 litre.
1 centrifugal pump with manual butterfly valves.
1 pipe sieve in DN 80.
1 plate heater, int. No. milk heater 1.
manufacturer year 1993 .
capacity 25.000 litre per hour.
existing with a big plate section and.
2 smaler plate sections..
with one pipe heat holder.
installed horizontal under the roof.
place requirement: length 3,5 m .
1 small plate heat exchanger.
working as a ice water cooler.
Fabr. No. 57583.
manufacturer year 2000.
capacity : 10.000 lh bis max. 6 bar.
with 1 Plate section.
with autom. working energy valves in DN 100.
is installed to extent the milk plate heater No. 1.
manufacturer is APV.
One pipe heat exchanger to produce hot water.
constructed out of stainless steel.
complete with energy and condensate valwe technique.
manufacturer is Deller, fabr. No. 25025-1.
manufacturer year is 1993.
1 Nagema milk separator from Kyffhäuser, Artern.
with aotumatic working counter pressure device.
capacity 25.000 litre per hour.
int. No. Sep. MI 1.
with a closed sludge balance tank.
manufacturer year: xxxxx.
place requirement: 2x 2 m.
1 hot water circulation pump.
manufacturer is Fristam.
with 7,5 kW motor, int. mark: CU 7.
1 cream plate heater.
with a complete hot water circulation system.
int. mark: .
CCP 2.3. Erhitzer und Rahmerhitzer 1.
The cream heater has 2 bigger plate sections.
and 1 smaler plate section, work as heater and.
1 small plate section, work as hot water .
Near by plate heater is installed a pipe heater .
constructed with stainless steel and automatic .
working energy valves.
is standing on 2 feet, length 1,5 m.
Manufacturer is Fa. Deller.
Fabr. No. 2333-13.
manufacturer year is: 1992.
Price up standing point: 42.000,00 Euro.
5 kg gable carton packaging machine
plant is standing without production since June 2017
and it is in a very good condition.
The 5 kg gable carton filling machine exist about:
a.) One round table gabl ...
D 123 .
5 kg gable carton packaging machine.
plant is standing without production since June 2017 .
and it is in a very good condition. .
The 5 kg gable carton filling machine exist about:.
a.) One round table gable carton filling machine.
manufacturer year is 2004.
Manufacturer is Induflex GmbH 27337 Blender.
Serial No. 380 10801-02.
capacity until to 800 packaging per hour.
with sterile air covering inside of the filling machine.
filled is fresh cream with 28 days shelf life.
with carton magazine.
with carton upfolder.
with 2 filling plant, who filled up 2 packaging in the same time.
with a gable carton sealing equipment.
One electronic cabinet installed on the machine, .
The filling head electric construction is made from ABB.
Place requirement is: L x B: 2.22 x 1,92 m, high 3,55 m.
pressed air vonccection is 8 bar, pressed air demand: 6 bar.
electric power input is 30 KVA.
weight of the machine is 3.000 kg.
1 centrifugal pump installed by a balance tank.
for CIP back flowing..
b.) with aproxx. 2 m plastic chain conveyor from .
the outlet of the 5 kg carton filling machine.
then 1 x 180° curve and 2 m chain conveyor with total .
3 motor drives into the inlet of the Meurer 5 kg carton .
manufacturer of the chain conveyor construction .
c.) One Meurer gable carton packaging machine.
2 packaging byside, 4 x 5 kg cartons in one in the top open 20 kg carton..
The gable carton measurements of the carton bottom is: 146 x 146 mm.
High of one 5 kg gable carton is 256 mm.
Measurement of the 20 kg carton is: L x B = 300 x 300 mm.
max capacaity is: 5 x 20 packaging per minute.
The electronic system is changed to a new one in 2013.
In the outlet is installed a transport conveyor approx. 2 m.
From this conveyor the 20kg carton was packed on pallets by hand.
Price up standing point: 38.500,00 Euro.
a. One aseptic working deep drawing and filling machine
Manufacturer is GEA Finnah,Type 2300
capacity is 21.600 units per hour
Manufacturer year is: 1998
size of the cups: 90 mm x 75 mm
deep drawing foil ...
D 122 .
a. One aseptic working deep drawing and filling machine.
Manufacturer is GEA Finnah,Type 2300.
capacity is 21.600 units per hour.
Manufacturer year is: 1998.
size of the cups: 90 mm x 75 mm.
deep drawing foil material is PS.
The dosing system of the filler can fill.
75 g to 300 g, all deep drawing tools without 75 g .
The machine was still standing since June 2017.
The dosing system of the FFV filler can fill per stroke .
4 different colours .
The GEA FFV filling machine has in the operator electronic.
installed a Siemens S 5 equipment..
After filling procedure the lid foil, which was sterilized .
with H2O2 was laying on the filled cups and the GEA machine .
drag this under the sealing station. .
After sealing was done, the closed cup quit the sterile tunnel .
and going under the press..
The press of the GEA machine cut single cups and the single .
cups arrive after this procedure the 4 lane Polycetting transport .
The electronic system of the GEA Finnah filling machine and of .
the sterile module is installed in 3 double door electronic cabinets..
The complete electronic system is active and sure available..
The machine is standing since Hune 2017-08-14.
The sterile module is standing on the left side of the GEA filling .
machine (running direction).
Configuration normal with 2 pipe heat exchanger and with sterile .
module filter technique..
Replacement stamping press is available.
It was be pressed in the past only single cups..
Further handling with the filled cups.
b. Transport out of the GEA filling machine was well done .
with a Polycetting transport conveyor, start with a 4-lane .
plastic chain conveyor,.
then reduction to 2 lanes and in the end (after 15 m) and .
then with a 180 degree installed 1 lane conveyor curve .
into the inlet of the Labeling machine.
c. The inlet to the crones labeling machine is a 1-lane conveyor.
2 label magazines are available.
The both label spending unit spend on the wall of the rectangular .
single cup in the same high 2 labels..
It seems like a cup body labelling, round about..
d. 1 fourfold fruit container connection plant and a .
white soft cheese mixing station..
Configurated with vertical installed dynamic working .
e. Out of the Krones labeling machine the single qurk cups .
with 4 fruit products will be transported with a 4-lane .
plastic chain conveyor into the inlet of the tray packaging .
4 different cup, 20 cups per tray was packed..
Manufacturer of the packaging machine is Schäfer&Flottmann..
The packaging produce from a carton flat a tray with 4 pile corners, .
without cup grids, measurements are: 200 x 300 mm.
The machine is working with Nordson glue technique..
f. The tray transport will be done with a plastic .
chain conveyor from 1,20 m to 2,40 m high..
The tray are transport in a high of 2,40 m to the inlet .
of the tray elevator..
The tray elevator lift the single tary one after one down .
into the basement floor..
manufacturer transport conveyors is Polycetting,.
manufacturer of the tray elevator is A&F..
g. In the basement floor is standing the tray layer palletizer machine.
Manufacturer is A&F.
with empty Euro and chep Pallete magazine.
the filled pallet is transport over a small roller conveyor .
outside of the palletizer machine, .
over an roller conveyor corner seat to approx. .
6 m roller conveyors..
The pallet doest need a special pallet safety shrinking foil, .
the piling corner of the trays bring enough stability..
White soft cheese processing..
h. The white soft cheese, germfree produced, would filled in .
2 equal constructed sterile tanks.
This sterile tank equaipment is standing o a stable .
stainless steel frame .
The germfree white soft cheese was sucked out of the .
2 sterile tanks with big capsule pumps. .
The 2 sterile tanks have a content of 1.500 kg and they have.
both in the top a stirrer drive with a stirrer in “Z” form..
The outlet of the sterile tanks will be done with a outlet .
pipe with automatic working vales in DN 120.
1 small rectangular balance tank with a man hole in the top,.
with a Alfa Laval centrifugal pump for CIP back ways..
i. One foaming machine with 1 mixing head.
Foaming will be done with Nitrogen gas..
with necessary valves and dosing systems.
1 small high balance tank with a centrifugal pump before..
Price up standing point: 244.000,00 Euro.
2 devices brewhouse with a wort of 5 HL, direct heated with GAS the plant March 2015 which is conditioning was:-2 devices brewhouse 5 HL wort Kettle, mash lauter tun - centrifugal pump and plate cooler - mashing Auto - ...
2 devices brewhouse with a wort of 5 HL, direct heated with GAS the plant March 2015 which is conditioning was:-2 devices brewhouse 5 HL wort Kettle, mash lauter tun - centrifugal pump and plate cooler - mashing Auto - Panel - 3 piece included storage tank of 5 hl (net) with CIP cleaning - 2 PCs supplied storage tank 5 hl (net) with CIP cleaning - mobile centrifugal pump used materials and components : Sheets: Thyssen Krupp pipes: beverage line pipe according to DIN 11850, clean, pipes 1.4301 valves: AWH Germany agitators and gear: Getriebebau NORD Germany pumps: PACO measuring and control technology: IFM control: Siemens S7 the plant is located in a very good condition. A tour is like possible by arrangement. We send to like more information upon request.
Glue tank, special design up to 20 mm edge,
Mint, conveyor belt
Main motor 4, 4kW
Heating 2, 7kW
L = 2800 B = 800 = 1200 H
Glue tank, special design up to 20 mm edge,.
Mint, conveyor belt.
Main motor 4, 4kW.
Heating 2, 7kW.
L = 2800 B = 800 = 1200 H.
This evaporative dryer was built in Hungary by DKG-EAST RT in 1995. The equipment was transported to Finland, where it was inspected by Finnish Inspecta in 1999. The original purpose of this equipment was to concentrate ...
This evaporative dryer was built in Hungary by DKG-EAST RT in 1995. The equipment was transported to Finland, where it was inspected by Finnish Inspecta in 1999. The original purpose of this equipment was to concentrate waste water solution from a molasses production process by evaporating water, but the system was never installed. The certified pressure for the equipment is max 2.0 bar, min -1.0 bar. The input heat for the evaporation comes from steam of 200 °C. .
The equipment is suitable for similar purposes, concentrating waste water streams from various processes and thus reducing the amount of waste water to handle. .
Capacity in molasses wash water evaporation: .
Input of thin stillage: 30.0 th, 8.5 %.
Output of product stillage: 3.54 th, 72 % .
Steam input: 3.9 th, 200 °C, 11018 MJh.
Heater 1. Nominal heat surface 512 m², actual heat surface 518 m². Max pressure 2.0-1.0 bar. Calculation temperature 135100 °C. Volume in pipe side 12.4 m³, coat side 9.2 m³. Material AISI 316 L, RSt 37.2. .
Heater 2. Nominal and total heat surface 410 m². Max pressure 2.0-1.0 bar. Calculation temperature 135100 °C. Volume in pipe side 10.9 m³, coat side 8.1 m³. Material AISI 316 L, RSt 37.2. .
2 x stainless steel boiler
Stainless steel lifting arm 380V 50 Hz
Boiler is extendable
for max 200 kg dough or 125 kg flour
Boiler diameter in about 95 cm
Boiler height inside 50 cm
tested and cleaned
2 x stainless steel boiler.
Stainless steel lifting arm 380V 50 Hz.
Boiler is extendable.
for max 200 kg dough or 125 kg flour.
Boiler diameter in about 95 cm.
Boiler height inside 50 cm.
tested and cleaned.
Tank content in litres: 300 lt
Brand: DMG MORI
Model: DMC 1035 V eco
Application type: Milling
Machine type: Machining Center
Construction year: 2008
Production hours: 10000
Origin country: ...
Brand: DMG MORI.
Model: DMC 1035 V eco.
Application type: Milling.
Machine type: Machining Center.
Construction year: 2008.
Production hours: 10000.
Origin country: Poland.
Measurements width: 2607 mm.
Measurements depth: 2198 mm.
Measurements height: 2650 mm.
Machine weight: 3600 kg.
Spindle speed range: 10000 1min.
Spindle motor power: 9 kW.
Tool taper: SK 40 .
Movement: 635 mm.
Working feed: 20000 mmmin.
Feed force: 5000 N.
Rapid traverse: 30000 mmmin.
Movement: 510 mm.
Working feed: 20000 mmmin.
Feed force: 5000 N.
Rapid traverse: 30000 mmmin.
Movement: 460 mm.
Working feed: 20000 mmmin.
Feed force: 2000 N.
Rapid traverse: 30000 mmmin.
Workpiece z: 720 mm.
Workpiece weight: 600 kg.
Outer length: 790 mm.
Outer width: 560 mm.
Number of T-Slots: 4 .
Distance between slots: 100 mm.
Max distance between vertical spindle and table: 720 mm.
Slots in storage: 20 .
Max weight: 6 kg.
Max tool diameter: 30 mm.
Max tool length: 300 mm.
Main electronic connection: 400 V .
Power consumption: 17 kVA.
Air pressure: 8 bar.
Lubrication tank: 120 L.
Chip conveyer: yes.
Cooling pressure: 3.7 bar.
Production line includes: (1) Infeed Station: Control through RFID (2) Machining Centre HONSBERG LAMP HSC Mach 500: Year of construction: 2000, number of spindles: 2, number of tables: 2, number of tool slots: 44, voltag ...
Production line includes: (1) Infeed Station: Control through RFID (2) Machining Centre HONSBERG LAMP HSC Mach 500: Year of construction: 2000, number of spindles: 2, number of tables: 2, number of tool slots: 44, voltage: 400V, nominal current: 160A, fuse rating: 250A, number of machines: 2, year of construction machine 2: 2002, including Coolant Plant KNOLL TG 30-2407 285: Year of construction: 2000, coolant tank volume: 2200l, number of machines: 2, year of construction machine 2: 2002 (3) Portal Control 840 D Powerline (4) Machining Centre HONSBERG LAMP HSC Mach 500: Year of construction: 2000, number of spindles: 2, number of tables: 2, number of tool slots: 44, voltage: 400V, nominal current: 160A, fuse rating: 250A, number of machines: 2, year of construction machine 2: 2002, including Coolant Plant KNOLL TG 30-2407 285: Year of construction: 2000, coolant tank volume: 2200l, number of machines: 2, year of construction machine 2: 2002 (5) Portal Control 840 D Powerline (6) Spraying Chamber Cleaning Machine MTM SKR 900: Length: 4840mm, width: 3310mm, height: 3265mm, voltage: 400V, connected load: 90kVA, fuse rating: 200A, capacity: Caustic tank: 1000l, rinsing tank: 800l, destimat: 200l, product size: 750x350x353mm, product weight: 30kg max. (7) Loading through Industrial Robot ABB IRB 6600 short arm: Year of construction: 2006, voltage: 400V, fuse rating: 35A, weight: 2t, load capacity: 175kg max., number of axis: 6, including Coolant Plant KNOLL TG 30-2407 285: Year of construction: 2000, coolant tank volume: 2200l (8) Cleaning Plant MTM Omega 5, product size: 730x350x355mm max., voltage: 400V, fuse rating: 250A, compressed air supply: 7-14bar, capacity: Washing water: 2000l, rinsing 1: 1000l, rinsing 2: 1300l, destimat: 270l, length: 5300mm, width: 2900 2060mm, height: 4670mm (9) Pressure Testing System PAUL KÖSTER: Year of construction: 2001 (10) Measuring Station KOMEG (11) Extraction Station for separation, control and sealing of the products (12) Chip Processing KSS: Year of construction: 2003, voltage: 400V, frequency: 50Hz, connected load: 13kW.
Tetra Almix Batch Mixer
The Tetra Almix batch version is a high shear mixer designed to dissolve powders and stabilizers like pectin and gums, quickly and efficiently. The unit can also be used for mixing l ...
Tetra Almix Batch Mixer.
The Tetra Almix batch version is a high shear mixer designed to dissolve powders and stabilizers like pectin and gums, quickly and efficiently. The unit can also be used for mixing liquid, concentrates, sweet condensed milk, and water..
The efficient mixing system produces homogeneous and lump-free products..
• No shear and high shear in the same machine.
• Produces high as well as low viscous products.
• Line solution for emptying and rinsing of barrels and concentrate tanks.
• Low raw material losses.
• Minimal air incorporation.
• Gentle blending of particles
2 silos receiving peeling fiber 100 cubic meters unit1 calcium oxide silo (lime) of 60 cubic meters of painted steel1 stainless steel silo 3 mm diamond pulp feed 4.5 ms1 stainless steel auger. Truck loading. 1 Complete installation composed of;1 pulp feed nozzle1 pulp lime mixer1 endless continuous pressSilo of reception of pulp and peeledConveyor distributor to container and truck.Plant treatment of solids and liquids of potato pulp and peeling.Pos.02) Emergency chokePos.02A) Power chopping boardPos.03) new cone in silo of peeling of potato and pulps.Pos.04) mixer type MPD-300 with automatic cleaning and feeding additives.Pos.05) Continuous press of type PTE-300 with automatic cleaning.Pos.06) Support structure of the mixer and pressPos.07) Electronic chartPos.08) Mixing preparation tankPos.09) Conveyor DosingPrice as it is and where it is
In X, Y, Z: 800 X 800 X 800 mm
The machine is in good technical condition, after agreement possibility of testing. Chip conveyor control OKUMA OSP-E100 Renishaw TS27 probe tool and preparation for the spindle probe avai ...
In X, Y, Z: 800 X 800 X 800 mm.
The machine is in good technical condition, after agreement possibility of testing. Chip conveyor control OKUMA OSP-E100 Renishaw TS27 probe tool and preparation for the spindle probe available spindle speed 15,000 rpmmin spindle high pressure 70 bar cooling clamping HSK 63 60 tools in the magazine without vices will include many devices in the tank
Hydraulic notching machine
Year of construction: 1995 2014 ueberarbeitet
detectable with Bill from Indumasch)
The hydraulically operated notching machine universal-206-makes ...
Hydraulic notching machine.
Year of construction: 1995 2014 ueberarbeitet.
detectable with Bill from Indumasch).
The hydraulically operated notching machine universal-206-makes a continuously variable notching in corners of 30-135 degrees possible. .
The rugged construction of machine allows cutting capacity of 6 mm. .
Pivoting knife carrier via Handwheel adjustable after graduation on the machine table. The attacks also can be adjusted after a Gradeiteilung. Hirzu there are ways of ventilation of the sheet location. .
Table clamp is manually.
Two additional pressure switch Mzpa7.
Table dimensions: 1000 x 800 mm.
Blade length: 200 mm.
Max cutting capacity: 6 mm.
Maximum cutting performance stainless steel: 4 mm.
Infinitely adjustable cutting head: 30-135 degrees.
Motor: 3 kW.
Oil tank: 60 litres.
Strokes min: 60.
Technical data operator data and are therefore not binding
Air Compressor Atelier Francois CE680B, 40 bar with Dryer and Air tank
This air compressor was made by Atelier Francois in Belgium in 2004, capacity FAD is 53.3 Nm3 min. with discharge pressure of 40 bars. The del ...
Air Compressor Atelier Francois CE680B, 40 bar with Dryer and Air tank .
This air compressor was made by Atelier Francois in Belgium in 2004, capacity FAD is 53.3 Nm3 min. with discharge pressure of 40 bars. The delivery includes the skid mounted 3–stage intercooled oil-free piston compressor and 1.000 litre galvanized 40 bar pressured air tank and separately installed stainless steel air dryer with integrated 1 micron air filter. The operation was stopped in 2007 but equipment is installed an in good condition but not anymore connected to electric power. .
Manufacturer: Atelier Francois, Belgium .
Serial no: 20G311.
Year: 2004 .
Capacity: 53.3 m³min, 40 bar .
Estimated operation hours: 20 000 .
Speed: 510 rpm.
Power: 550 kW .
Dryer: Hankison .
Pressured air tank: .
Manufacturer: Römer GmbH, Germany.
Operating pressure: 45 bar max..
Operating temperature: 50 °C max..
Volume: 1.000 ltr.
Serial no: 3164571.
Jenbacher 312 551 kw complete on large control blue with diane
motor has ca 77000 betribsstunden complete with gas control line power switch documentation batteries of abgaswermetaucher-schalldamfer oil tank Sund pumps
Jenbacher 312 551 kw complete on large control blue with diane.
motor has ca 77000 betribsstunden complete with gas control line power switch documentation batteries of abgaswermetaucher-schalldamfer oil tank Sund pumps.
Motor is in the good condition.
Motor with or one revition bought verden
Flow rate (m3 h): Approx. 545 m3 h
Power (kW): 110 ppal engine
Hours Hours: 36799
Complete with lung tank and dryer
Remarks: Compressor at 220V . ...
Flow rate (m3 h): Approx. 545 m3 h.
Power (kW): 110 ppal engine.
Hours Hours: 36799.
Complete with lung tank and dryer.
Remarks: Compressor at 220V .. Cooling tower included.
Glass Bottle Fillerblock AVE FHP 18 000 bph for still drinks, hot filling
This glass bottle rinsing-filling-capping machine was made by Italian AVE in 2002. It is designed for gravity based hot filling up to 85 – 95 ...
Glass Bottle Fillerblock AVE FHP 18 000 bph for still drinks, hot filling.
This glass bottle rinsing-filling-capping machine was made by Italian AVE in 2002. It is designed for gravity based hot filling up to 85 – 95 °C. Gravity filling systems are suitable for still beverages. With these systems, filling is carried out by simple fall. Once the pre-set filling level is achieved, the product in excess is re-collected to the filling tank. The filling tank is completely manufactured in AISI316, as well as all the parts in contact with the product. The machine has operated 0.2 and 1.0 liter glass bottles. Equipment is in good condition, some parts need refurbishment before operating. .
Manufacturer: AVE Industries S.p.A., Italy.
Model: UNIBLOCCO FHP 404012.
Serial no: 2290 .
Capacity: 3.000 – 18.000 bph.
Number of filling heads: 40.
Max bottle diameter: 110 mm.
Capping: Twist-off caps.
Dimensions: 4.5 x 3.3 x 3.3 m, 7.000 kg.
Electricity: 15 kW, 380 V, 50 Hz .
Certification: CE .
Aseptic PET Line PROCOMAC 18.000 bph year 2004
Line is still installed but not powered it was used for filling still water but it can be used for any still any still product: high acid, low acid, clear, viscous and ...
Aseptic PET Line PROCOMAC 18.000 bph year 2004 .
Line is still installed but not powered it was used for filling still water but it can be used for any still any still product: high acid, low acid, clear, viscous and those with pulps, fibers and pieces with dimensions up to 6x6x6 mm. This was installed in 2004 and was in use till 2015 it is still today installed but not powered anymore. .
Aseptic filling of still products.
The product is fed from a sterile buffer tank located on top of the filling carrousel and pushed by an overpressure of sterile nitrogen gas, through a linear product path. The flow meter determines the quantity of liquid according to the container and closes a membrane valve when the pre-set quantity is reached; a dual-speed design (slow speed mode is used at beginning and end of filling cycle) avoids foaming even with critical products..
The flow meter is the only moving part in contact with the product and the filling process does not allow contact between the filling nozzle and the bottle to avoid cross contamination. FX fillers are sterilized internally using steam to guarantee optimal hygiene..
The bottle ‘neck handling’ system allows handling of any container with the same neck finish. Changeover is performed without compromising sterility. CIP cup insertion and extraction for closed-loop CIP and SIP is completely automatic. Automatic product changeover can be achieved in less than 30 minutes with minimal product scraps..
Made by GEA Procomac .
Made in year 2004.
Capacity: 8.000 bph @ 0.5 lt; 12.000 bph @ 1.5 lt; 9.000 bph @ 2.0 lt.
Neck finish: ?.
Products: Any still any still product: high acid, low acid, clear, viscous and those with pulps, fibers and pieces with dimensions up to 6x6x6 mm.
Availability: Immediately available .
List of equipment: .
Procomac Uniclean 3A year 2004.
Procomac Uniclean 3A year 2004.
Procomac Unisolve VE BS year 2004.
Procomac Unimix CM CM2 30 year 2004.
APV Pasteurizer APV Invensys 1129 year 2003 24000 Lh.
APV Homogenizer Rannie 90-76.115 year 2003 18000 Lh.
APV Homogenizer Rannie 55-60.95 year 2004 8000 Lh.
Procomac Bottle Conveyor year 2004.
Procomac Convair 2000 year 2004.
AGR AGR Camera year 2009 .
SIPA Blower SFR 16 E year 2004, cap 22000 bph.
Procomac Mechanical Cap Feeder, year 2003.
Procomac Sterilcap 3W, year 2006.
Procomac Unidox, year 2004 .
Procomac Unitherm HS 20, year 2004.
Procomac Uniflux year 2004.
Procomac Aseptic Filler Fillstar CX 70.20.113, year 2004.
Arol Aseptic Capper EUR PK Elespectic year 2004, cap 18000 bph.
Heuft Bottle Inspector Spectrum TX, year 2004.
Fuji Sleever year 2004 22000 bph.
Sacmi Labeller Opera 200 RF 15TR year 2004, cap 19800 bph.
Procomac Divider BMCA year 2004.
Dimac Packer Star 60 year 2004 43200 bph.
Twinpack Handle Applicator MDE year 2004.
Floor rider sweeper-scrubber Tennant 8210 Diesel
Combination of vacuum sweeper and wet scrubber with 4 cyl . Kubota diesel engine water cooled.
Tank high dump , stepless hydrostatic drive , automatic functions .
Floor rider sweeper-scrubber Tennant 8210 Diesel.
Combination of vacuum sweeper and wet scrubber with 4 cyl . Kubota diesel engine water cooled..
Tank high dump , stepless hydrostatic drive , automatic functions ..
Max . Working width 1270 mm ..
2 x present, year of construction 20062005, done hours of operation about 220 and about 1020..
Solid technology from the brand manufacturers , for indoor and outdoor surfaces !.
Realistic price suggestions are gladly accepted and answered.
System includes: (1) Storage Silo: Number of silos: 2, capacity: 36m³ (2) Stainless Steel Storage Tank AZO D800-VB800X1900GH: Number of tanks: 2, capacity: 25m³, condition: Unused (3) BigBag Unloading Station: Number o ...
System includes: (1) Storage Silo: Number of silos: 2, capacity: 36m³ (2) Stainless Steel Storage Tank AZO D800-VB800X1900GH: Number of tanks: 2, capacity: 25m³, condition: Unused (3) BigBag Unloading Station: Number of stations: 2 (3) Vacuum Pump BUSCH (4) Steel Construction (5) Weighing Container, Pipes, Exhaust System, Control Cabinets, Wiring, Electric Documentation, Drawings, Piping Diagram, General Documentation and Tets Certificates available.
Brand: INGERSOLL HANSEN
Model: Gantry 500
Application type: EDM
Machine type: Erosion machine
Construction year: 1996
Location: United Kingdom
Origin country: Germany
Brand: INGERSOLL HANSEN.
Model: Gantry 500.
Application type: EDM.
Machine type: Erosion machine.
Construction year: 1996.
Location: United Kingdom.
Origin country: Germany.
Measurements width: 2100 mm.
Measurements depth: 2450 mm.
Measurements height: 2600 mm.
Machine weight: 4800 kg.
Number of spindle: 1 .
Movement: 525 mm.
Movement: 400 mm.
Movement: 375 mm.
Outer length: 730 mm.
Outer width: 630 mm.
Main electronic connection: 400 V3 50 Hz .
Power consumption: 8.5 kVA.
Dielectric tank: 400 L.
1 - Cooling unit not included in sale.
gebr. Radial drill press Stanko 2A554 MK 5 x 1600 mm, built circa 1975
Spindle retainer 5 MK
Drilling performance steel 50 mm
Power 5,5 KW
Spindle speeds 18-2000 RPM
Quill stroke 400 mm
Feed rates of 0.045 - 5 mm ...
gebr. Radial drill press Stanko 2A554 MK 5 x 1600 mm, built circa 1975.
Spindle retainer 5 MK.
Drilling performance steel 50 mm.
Power 5,5 KW.
Spindle speeds 18-2000 RPM.
Quill stroke 400 mm.
Feed rates of 0.045 - 5 mm UMD..
Extension spindle 1600 mm.
Dimensions (Lxwxh) 2800 x 1000 x 3430 mm.
Weight approx. 4,700 kg.
-Thread cutting device.
-Central clamp electric.
For sale sand blasting machine with a Vespa free blasting tank and a screw compressor Kaeser BS51 in mint condition.
Hours of operation 8363
Weight approx. 1.200 kg
System is now available.
Package price € ...
For sale sand blasting machine with a Vespa free blasting tank and a screw compressor Kaeser BS51 in mint condition. .
Hours of operation 8363.
Weight approx. 1.200 kg.
System is now available..
Package price € 3.800,00 free shipped from stock Arbing.
Drilling rig Grundodrill 12 GS vehicle + locating system drill Track G2
Truck to 7731 T31 with 2 axle trailer with ramps
-ONE year of manufacture 1995
Drilling rig GRUNDODRILL 12 GS
-Manufacturer TRACTO-TECH ...
Drilling rig Grundodrill 12 GS vehicle + locating system drill Track G2.
Truck to 7731 T31 with 2 axle trailer with ramps.
-ONE year of manufacture 1995.
Drilling rig GRUNDODRILL 12 GS.
-Manufacturer TRACTO-TECHNIK GmbH.
-Type 12 GS drilling bore rig.
-Tractive force 120 kN.
-Thrust 120 kN.
-0-20 ° inclination angle.
-Number of strokes 1000 min-1.
-maximum torque at 130 Umin.
-maximum spindle RPM 70130 Umin.
-Pilot hole diameter 80 mm.
-Diameter percussion drilling pipe TWIN DRIVE 54 mm.
-Impact drill pipe (effectively) 3000 mm long.
-maximum feed speed 0.5 msec.
-maximum diameter of Expander (soil-dependent) ≤ 600 mm.
-maximum pipe of A diameter (soil-dependent) ≤ 450 mm.
-maximum drilling length (depending on the floor) ≤ 350 mm.
-maximum detection depth (depending on the system) 16 m.
-minimum theoretical bending radius 42 m.
-maximum speed 1.2 kmh.
-Fresh water tank 200 liters.
-Drive motor (diesel) HATZ.
-Commercial at 1750 RPM 68 kW.
-Power Max kW at 2400 RPM 80.5.
-Diesel tank 100 litres.
-maximum hydraulic pressure 300 bar.
-Oil tank capacity (oil) 60 litres.
-12 V starter system.
-Sound pressure level LPA according to DIN EN ISO 11201.
-Sound pressure level LWA according ISO 4872.
-Incl. operating instructions.
-Dimensions (Lxwxh) 6160 x 1900 x 2440 mm.
-Weight 8450 kg.
-Boom box weight incl. 48 rods approx. 1600 kg.
-Linkage weight 25 kg.
The Grundodrill 12 GS drilling rig is used exclusively for the production of underground tunnels in sand, silt, clay and clay soils with low stone inclusions up to a diameter of 450 mm (depending on the floor)..
The first step creates a pilot hole with the diameter of the drill head..
In the second step, this pilot bore is so enlarged through special Expander in diameter and pulled into the channel in the continuative piping at the same time..
A drilling fluid (usually water-bentonite mixture) is used to reduce the soil mechanical resistance during these operations. .
In addition, the drilling fluid serves as a support medium for the dissolved particles along the tunnel wall to the start - or intermediate pit..
This procedure is used mainly in the fields of supply:.
Used in PE, steel or cast iron..
The GRUNDODRILL 12 GS drill is suitable for the following applications:.
-Crossroads of federal highways, highways, parking lots, etc.,.
The drill operates the poles and cutting tools, which create a tunnel through which the product tube is retracted..
Beacon drill track G2.
-Manufacturer of Radiodetection CE, continental Europe.
-Monitoring location system of drilling.
The drill Track G2 receiver is designed for the requirements of horizontal drilling..
Good used condition..
For further details on request. Sale as shown (see pictures).
Changes and error in the technical details and information and subject to prior sale..
Condition: overhauledFor pumping alive fishPump RVF27TM (installed 3 pumps)Capacity of pump: 700 m3hMotor power: 45 kW at 1450 rpmMin. suction pressure: 40 mbar (at service liquid temperature 20 C)Max. service liquid f ...
Condition: overhauledFor pumping alive fishPump RVF27TM (installed 3 pumps)Capacity of pump: 700 m3hMotor power: 45 kW at 1450 rpmMin. suction pressure: 40 mbar (at service liquid temperature 20 C)Max. service liquid flow for 1 pump: 40 ltrminService liquid intake adjustable by liquid counter separate for each pump.Standart capacity tanks for conveying alive fish should be 3,2 or 4,2 m3., with inlet and outlet 350 mm accordingly.Vaccum pumps, manifolds, water pump and wiring with el.panels are placed in regular container size 3 x 2,4 x 2,5 m
257 kW, MTA water chiller air-cooled, type: Aries TECH AST 120 SN
The Aries TECH AST 120 SN are air cooled water chillers, which are suitable for outdoor installation (from -10 °C up to + 46 °C) with T ...
257 kW, MTA water chiller air-cooled, type: Aries TECH AST 120 SN.
The Aries TECH AST 120 SN are air cooled water chillers, which are suitable for outdoor installation (from -10 °C up to + 46 °C) with Tube bundle evaporator and four scroll compressors and Control Panel..
In addition, the cooling unit has:.
-Storage tank, - shut-off valves before + after the refrigerant circuits, EC fans, - Electr. Frost protection heating,.
-Filter mats before condensors... .
Cooling capacity (kW): 257.
Water temp.. Exit entry (°C): 7 12.
Flow rate (m3 h): 44.
Ambient temperature (°C): 35.
Refrigerant R 407C..
Circuits (number): 2.
Compressor (number): 4.
Performance level (%): 0-25-50-75-100.
Voltage V 400, frequency Hz 50, stages of pH 3..
Maximum power consumption (kW): 121.
Max current (A): 197.
Start-up current circuit 1 and 2 (A): 423 419.
Protection class: IP54.
Length (mm): 4595, width mm 2188, height 1940 mm.
Weight (kg): 3063 connection: (inch): DN 125 (5") Vitaulic.
Serial No.: 2200287751.
Year of build 2016, State: Optical 1, technically 1.
Price: On request (plus VAT from Nettetal), without warranty, trial run in Nettetal possible.
Used machines can have Visual defects due to their use..
(Subject to change and prior sale reserved!).
Location: MTA Deutschland GmbH, 41334 Nettetal.
Model: H-250 B
Application type: Injection_moulding
Machine type: Injection Moulding Machine
Construction year: 1979
Production hours: 274560
Model: H-250 B.
Application type: Injection_moulding.
Machine type: Injection Moulding Machine.
Construction year: 1979.
Production hours: 274560.
Origin country: Germany.
Measurements width: 6500 mm.
Measurements depth: 2300 mm.
Measurements height: 2200 mm.
Machine weight: 10500 kg.
Type of drive: Mechanical.
Injection pressure: 300 kN.
Clamping force: 2850 kN.
Opening stroke: 560 mm.
Distance between bars (h x v): 550 x 550 mm.
Size of mold platens: 840 x 840 mm.
Main electronic connection: 380 V 3 P 50 Hz .
Power consumption: 22 kVA.
Oil tank: 510 L.