tank used for sale

Stainless steel container 5,000 litres, 2 chambers 50/50, 2 x lid, insulation, 2 x floor drain tap, 2 x 2,500 litres, Ca-abemssungen: length 2,900 mm, width 1,300 mm, height 1,600 mm Price ex works

- 2 ZK yeast tanks, Fabr. BAM, each with a capacity of 59.98 hl, zul. Operating overpressure 3.5 bar, in stainless steel, standing on 3 feet, with 3 cooling zones (2 x frame + 1 x cone), with screwed swivel cone tip, with agitator in the cone, with Spray head, top with ladder bracket, YOC 1985. - 2 ZK yeast tanks, Fabr. Steinecker, with a capacity of 62 hl each, zul. Operating overpressure 3.5 bar, in stainless steel, standing on 3 Feet (1 foot on load cell), with 3 cooling zones (2 x frame + 1 x cone), with screwed swivel Cone tip, with agitator in the cone, with spray head, pulled down cleaning line, top with conductor bracket, YOC. 1981.

Stainless steel container standing 6,000 liters, insulation - 1 x yes, 1 x no; Approximate dimensions: diameter: 1,850 mm, total height incl. feet: 3,300 mm, height feet: 700 mm, height container 2,300 mm without cone Use so far: lye or acid

- 2 pressure tanks with 61.1 hl, Fabr. Noble, 2 bar, in stainless steel, single-walled, standing, with manhole in the lower frame, Spray head with downed cleaning line, fittings, with papers, Ø: 1,500 mm, H: 4,200 mm. - 4 pressure tanks with 102.2 hl, Fabr. Noble, 2 bar, in stainless steel, single-walled, standing, with manhole in the lower frame, Spray head with downed cleaning line, fittings, with papers, Ø: 1,800 mm, H: 4,900 mm.

Stainless steel container, transport container 250 liters Content: 250 Ltr. Working pressure: 0.9 bar, according to type plate, without papers, test pressure 2.0 bar Material: Stainless steel, 1.4301 Design: round, standing, on 4 feet, with welded construction for use by forklift or pallet truck, Outlet with disc valve DN 50, in the upper lid DN 125, 1 x safety valve, 2 x quick coupling connection for CO², Total weight 57 kg last use: Food Height: approx. 1,515 mm Diameter: approx. 625 mm

Information on request

Container turning device Fabr. WMWYear 1984consisting of 4 individual container rotating unitsCapacity: unfortunately not visibleAll idlers as double rolls, width: 185 mmDiameter idlers: 500 mmconsisting of:- 1 drive unit length 2000 mmxa0xa0 the furthest distance between the rollers is 1400 mmxa0xa0 External dimensions with control unit 2800 x 900 x 970 mmxa0xa0 1 control unit (speed + -, direction of rotation re-li)xa0xa0 footswitch- 3 revolving roller units (1 x blue, 2 x white)xa0xa0 blue: total length 2800 mmxa0xa0 white total length 2000 mmxa0xa0 white total length 2400 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Welding turning device make PROTARC-ZAAR type RB-ASV 1000Machine -No: 5540 built in 1988Technical specifications:Load capacity: 10 tRoll diameter: 400 mmRoll width: 110 mmNumber of roles: 2 eachExternal dimensions (driven part): 3500 x 900 x 900 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Welding turning device make HEINRICHSGLÜCK type RA 20Item No. 2171, make -No: D206435, built in 1989Technical specifications:Load capacity: 10 t = 20 tconsisting of- 1 powered rotating device Rollendrm. approx. 200 mm- 1 revolving device Rollendrm. approx. 400 mm smallest distance between the rollers approx. 200 mm largest distance between the rollers approx. 1400 mmused, but in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Roller block / welding turning device make APS type R 500Machine -No: U1-003 built in 1999Technical specifications:Max. workpiece weight: 500 kgTube diameter: 50 - 500 mmCircumferential force: 2500 NPeripheral speed: 0.05 - 1.5 rpm.electr. Connection: 220V/500WApprox. weight: 160 kgExternal dimensions approx.: 1600 x 750 x 1400 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

For sale: - vertical tanks with a capacity of 35,000 liters and 30,000 liters. - tanks dismantled

2 pieces of lying fermentation tanks, Fabr. Gresser, lying in storage saddle: each 6,550 lt capacity, 0.0 bar, coolable via half-tube coils in the cylinder Manhole in the front floor Spout Sampler Cleaning line Ø: ~1,900 mm, L: ~3,400 mm.

10,000 litres of above-ground containers for water or plant processes

Consisting of : - 3 tanks of 18000 litres - 3 tanks of 15300 litres - With walkways - Material: AISI 316 - Square discharge door (bottom) - Motorised mash discharge - Round manhole DN 400 (cylindrical part) - Total emptying: ball valve Ø 40 Friedrich no 2 - Partial drain: ball valve Ø 40 Friedrich no 2 - Taster - Recirculation with ball valve Ø 40 Friedrich no 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, with a cylinder-grid fixed inside (to keep the mash cake wet) Dimensions : - 3 tanks 18000 litres: Ø 2000 mm, height 5600 mm - 3 tanks 15300 litres: Ø 2000 mm, height 4800 mm - Ground clearance: approx. 550 mm

For sale : 500L useful fermenter Atmospheric Insulated Sampling buffer tap EPDM seals Stainless steel valve plugs Supplied with solenoid valve Price mentioned per unit 6 available

Technical data: V- 36 hl, 1.5 bar, stainless steel producer: Steinecker / Germany volume: 3.6 m3 pressure: 1.5 bar two cooling zones with chilled water propeller stirrer drive

Used storage tanks VARIBOX - 1.000 L - double-walled - with plug-in system and recesses for forklifts - Capacity: 1,000 L -Plastic - tested and cleaned - for diesel, oil or other liquids Discount possible for higher quantities. Inspection and shipping costs after consultation.

Spray booth water stabilizer Specifications: Agitator Pump Filler neck Ø 9 cm Thermostat display Level indicator Ø 176cm H: 67 thickness 3mm More items - new and used - can be found in our shop! International shipping costs on request!

- Coated steel tanks - Vertical, on concrete base Dimensions : - Depth : 2150 mm - Width : 1350 mm - Total height: 2700 mm - Ground clearance: approx. 350 mm (on concrete wall) Equipment : - Rectangular manhole 320 x 420 mm - Partial discharge, flap valve, DN 40, Friedrich no. 2 - Residual discharge, flap valve, DN 40, Friedrich no. 2 - Level indicator - Aeration and deaeration, DN 40, Friedrich no. 2

- Coated steel tanks - Vertical, on concrete base Dimensions : - Depth : 3800 mm - Width : 1850 mm - Total height: 2700 mm - Ground clearance: approx. 350 mm (on concrete wall) Equipment : - Rectangular manhole 320 x 420 mm - Partial discharge, flap valve, DN 40, Friedrich no. 2 - Residual discharge, flap valve, DN 40, Friedrich no. 2 - Level indicator - Aeration and deaeration, DN 40, Friedrich no. 2

- Coated steel tanks - Vertical, on concrete base Dimensions : - Depth : 3100 mm - Width : 1400 mm - Height: 1800 mm Equipment : - Rectangular manhole 320 x 420 mm, offset to the side - Partial discharge, flap valve, DN 40, Friedrich no. 2 - Residual discharge, flap valve, DN 40, Friedrich no. 2 - Level indicator - Aeration and deaeration, DN 40, Friedrich no. 2

Chemineer Ltd PD5M mixing tanks Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph

Chemineer Ltd PD5M mixing tanks Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph

3. Qty. 6 Second-hand process tanks Mfc.: Glencore Volume: 80 m³ Built: 2000 Dia.: 4.64 m Height: 5.23 m Stopped: 2018 Material: AVESTA 2507 (Super Duplex Steel) Code: API - 650 Capacity: 80 m³ Weight: 4.8 T Process: Leaching process Asset: Zinc Asturine Construction Structural Element Thickness Material Bottom 6 mm AVESTA SAF-2507 Virolas 6 mm AVESTA SAF-2507 Internal 6 mm AVESTA SAF-2507 Ceiling 6 mm AVESTA SAF-2507

5 used bitumen and oil tanks available the tanks are all around 10 m long and between 1.90 and 2.00 m in diameter for more see photos

Pressure: -1 / +2 bar / bar Volume: 1300 Ltr Temperature: 20 С Manufacturing date: 1996

Description: Capacity: approx 6.2 m3 Approx. Onsite Dimension. (l x w x h): 1,500 x 1,500 x 3,500 mm, weight approx.: 2,000 kg

Refrigerant: R407F; Class: 4BII;

Refrigerant: R407F; Class: 4BII;

Volume: 5000 l Quantity available: 2 pcs.  Price per item.  More then 300 machines new and second hand on our seema .de

Capacity: 1750l, max. operating temperature: 150°C, max. operating overpressure: 3.9bar, height: 2651mm, with extensive documentation, on-site inspection is possible.

There are four identical tanks available, motor power: 2.2kW, diameter: 3180mm, height: 3325mm, weight: 8t, with documentation.

Capacity: 5000l, max. operational temperature: 30°C, diameter: 1500mm, height: 3750mm.

Capacity: 9670l, weight: 2.3t, with agitator.

Capacity: 50l, operating temperature: -10 to 50°C.

There are two identical storage tanks available, diameter: 1500mm, height: 2500mm.

150 l stainless steel container Manufacturer : Sartorius Technical specifications : - 150 litre stainless steel container heatable, double jacket Interior: -1/+3 bar pressure- and vacuum-resistant Operating temperature 150 °C Double coat: -1/+4 bar pressure- and vacuum-resistant Operating temperature 150 °C Documents available - GMP standard mobile

There are three identical storage tanks available, width: 700mm, height: 3600mm.

Capacity: 156.73hl, pressure: 0.9bar, diameter: 2600mm, height: 3600mm, without accessories or documentation, was used for storing beer.

Capacity: 6200l, diameter: 2250mm, height: 2400mm.

Capacity: 2173l, diameter: 1500mm, height: 1230mm.

Usable volume: 1400l, melting kettle capacity: 90l, with anchor agitator and a homogenizer, for heating and cooling, was mainly used for the production of lotions, an on-site inspection is possible.

Stainless steel container Manafacture: Noorden Capacity 500 litres Mobile standing stainless steel container Double jacket for heating and cooling without pressure Product space pressure- and vacuum-resistant -1/+3 bar Operating temperature product space around jacket 150 °C Magnetic stirrer on the underbody Power 0.25 kW

Pressure vessels, compressed air tanks OKS, Otto Klein Stahlblechverarbeitung GmbH 479109 year 2000 Operating pressure: 16 bar maximum capacity: 10 litres Dimensions: 470 x 290 x 240 mm

Manufacturer: unknown Capacity: ~750 l Year of construction: 2000 Standing on 3 feet CIP-capable Manhole available Material: V2A / AISI 304 Condition: good

Pressure vessels, compressed air tanks with bracket and connections UDO KLEUSBERG GmbH X20.7.040.06 Pressure Equipment Directive (PED): 97/23/EC Content: 40 litres Operating pressure: 11 bar Connections ( internal thread ): 2 x R 1 1/2, 2 x R1 ( inch ) used, tested ! Dimensions ( boiler ): Ø 280 x720 mm Dimensions ( packaging ): 885 x 460 x 320 mm

Pressure vessels, compressed air tanks with bracket and connections UDO KLEUSBERG GmbH 01.20.7.040.06 Pressure Equipment Directive (PED): 97/23/EC capacity: 40 litres operating pressure: 11 bar Connections ( internal thread ): 2 x R 1 1/2, 2 x R1 ( inch ) used, tested ! Dimensions ( boiler ): Ø 280 x720 mm Dimensions ( packaging ): 870 x 550 x 320 mm

Pressure vessels, compressed air tanks SILIT - WERKE 3.5239.4-EG capacity: 200 litres zul. Operating pressure: 15 bar max. Operating temperature: +100 °C Main connectors: 1x 21/4 ( inches ), 1x 21/2 ( inches ) various auxiliary connectors: 3/8 ( inches ) to 1 ( inches ) Material: Steel, painted used, tested ! Dimensions: 1450 x 500 x 1100 mm