tank stainless steel used for sale

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: on hand reel, for rope hoist multi-purpose hoist -Rope diameter: 12 mm -Length: 40 m -Transport dimensions: 430/300/H460 mm -Weight: 26.9 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 20 m -Number: 3x steel cable available -Price: per piece -Transport dimensions: Ø 440 x 110 mm / Ø 430 x 95 mm -Weight: 10.7 kg / 11 kg

Cutting blades, replacement blades for guillotine shears, replacement cutting edges, cutting blades, shear blades, flat steel blades for profile steel shears, lever shears -Cutting blade: Replacement blade, flat steel blade for profile steel shears, lever shears -Cutting length: 229 mm -Hole spacing: 120 mm / M16 see photos -Dimensions: 229/15/H63 mm - Weight: 1.6 kg

Big bag traverse, lifting sling, adjustable traverse, crane traverse, overhead crane, crane hook traverse, load traverse, heavy load traverse, cross traverse, H-traverse -Crane traverse: Traverse for reinforcing steel mesh or similar -Load capacity: 5 tons -Hook chain: Length 940 mm -Transport dimensions: 2920/2365/H540 mm -Empty weight: 315 kg

Reinforcing steel mesh shears such as guillotine shears, sheet metal shears, sheet metal guillotine shears, hydraulic shears -Manufacturer: Maschinenfabrik Bock, hydraulic guillotine shear, reinforcing steel mesh shear type 2550 -Cutting width: 2500 mm -Max. cutting capacity: Ø 12 mm double at 100 mm pitch -Motor: Dietz 7.5 kW -Space requirement: 3020/2000/H1320 mm -Transport dimensions: 3130/1080/1465 mm -Weight: 2000 kg

Offer 23145 Technical data: - Flat steel shears - blade length 420 mm - For flat material 400 x 15 mm - Profile steel shears - no knives available - L-steel at 90° 110 x 10 mm - at 45° 65 x 8 mm - T-steel at 90° 90 x 10 mm - Steel bar shears - no knives available - Round steel / square steel 35 / 32 mm - Notching device - for material up to 12 mm - Triangle notch T 60 mm - Hole punch - punching force approx. 500 KN - - Stroke infinitely variable 0 - 40 mm - Punches in steel up to 30 mm Ø in 15 mm - Projection 410 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1400 x H 1800 x D 700 mm - Weight approx. 1800 kg - with: - various punches + dies - Support stop table - Triangular notching device - 2 St. E. footswitches

Offer 23145 Technical data: - Flat steel shears - blade length 420 mm - For flat material 400 x 15 mm - Profile steel shears - no knives available - L-steel at 90° 110 x 10 mm - at 45° 65 x 8 mm - T-steel at 90° 90 x 10 mm - Steel bar shears - no knives available - Round steel / square steel 35 / 32 mm - Notching device - for material up to 12 mm - Triangle notch T 60 mm - Hole punch - punching force approx. 500 KN - - Stroke infinitely variable 0 - 40 mm - Punches in steel up to 30 mm Ø in 15 mm - Projection 410 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1400 x H 1800 x D 700 mm - Weight approx. 1800 kg - with: - various punches + dies - Support stop table - Triangular notching device - 2 St. E. footswitches

Doka Framax 3.00 Steel 124m2 Framax panel formwork is a high-performance steel frame formwork for forming large areas with a crane.

Key data: 100 KG, 600 mm, 956 mm

100 pcs Stow type used shelf

Key data: 50 mm, 600 , 1200

100 pcs TORRI type used shelf .

Key data: 100 mm, 600 , 1300

100 pcs META type used shelf

Key data: 100 mm, 915 , 991

DEXION type used shelf

Key data: 100 mm, 600 , 1200

Used shelf Frame 600 x 1980 mm, (130 pcs) Shelves 600 x 1200 mm, (550 pcs )

Key data: 30 mm, 30 mm, 80 mm

Flat steel shears - Flat steel 2° inclination 300 x 10 mm - Flat steel 5° inclination 200 x 13 mm - Knife length 305 mm Profile steel shears - L-profile at 90° 80 x 80 x 8 mm - L-profile at 45° 60 x 60 x 6 mm - Round steelØ 30 mm - Square steel 30 mm 3-point notching station - Flat steel 7mm - Notching depth 50mm - Notching width 40mm Punching station - Punching capacity 450 kN - Material thicknessØ 27 x 13 mm - Projection 175 mm incl. electric stop

Key data: 100 mm, 400 , 1500

Used shelf Frame 400 x 3400 mm, (90 pcs) Shelves 400 x 1500 mm, (500 pcs)

Key data: 100 mm, 800 , 1200

Used shelf Frame 800 x 3400 mm, (35 pcs) Shelf 800 x 1200 mm , (190 pcs)

Key data: 50 mm, 300 , 970

Used shelf Shelf : 300 x 970, 1900 pcs Frame : 300 x 1830. 330 pcs

Key data: 50 mm, 600 , 1200

TORRI type used shelf

Max. punching capacity: 400 kN Max. shear capacity: 600 kN Punches 20 mm holes in 16 mm steel Shears on the flat steel shear to 300 mm up to material thickness of 12 mm steel Further technical data on request With an assortment of stamps and dies as desired Weight: approx. 1,500 kg

Year of construction 2015 Operating hours: 7747 Straightening and cutting from wire coils Max. Production speed: 160m/min Wire diameter 8 - 20mm 6 wire diameters guided in parallel, Automatic and immediate selection of wire diameter Finished wire rod length: 500mm to 14000mm Rotor straightening system with hyperbolic straightening rollers (no damage to the wire surface) Fully automatic wire diameter change Shears for cutting to length 14-metre wire rod outlet and roller conveyor 6 driven reels, suitable for 5 tonne coils Beckhoff controller, network connection, online service

Working range Mesh width (cross-wire length) max. 1,600 – 2,500 mm Distance between the outermost longitudinal wires max. 2,400 mm Number of longitudinal wires, depending on configuration max. 26 Longitudinal wire spacing: 150 mm Longitudinal wire diameter 4.0 – 8.5 mm Cross-wire spacing min. 50 mm, freely programmable in increments of 0.1 mm above this range Cross-wire diameter 4.0 – 8.5 mm Working speed: max 150 cross wires/min Scope of supply: line wire spool pay off to mesh paket stacking system

Key data: 100 mm, 600 , 1300

200 pcs META type used shelf

Key data: 100 mm, 600 , 1300

200 pcs META type used shelf

: 50 t. weight: 1,8 t hydraulic: ja round bar steel: 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Steel beam, HEB steel beam, double T-beam, IPB steel beam, steel column -Steel beam: HEB 140 mm with head and base plate -Condition: according to pictures -Total length: 4280 mm -Width: 140 mm -Height: 140 mm -Flange thickness: 12 mm -Bridge thickness: 7 mm -Base plate: 300 x 300 x 25 mm -Head plate: 200 x 250 x 20 mm -Number: 53 pieces steel beams available -Price: per piece -Weight: 171 kg/piece

Cutting blades, replacement blades for guillotine shears, replacement cutting edges, cutting knives, shear blades, flat steel blades for profile steel shears, lever shears, sheet metal knives -Manufacturer: Peddinghaus, 2 cutting blades for profile steel shears 210/16 -Cutting length: 229 mm -Hole spacing: 140 mm / M18 see photos -Submission/Price: complete -Dimensions: 260/18/H70 mm -Weight: 2.4 kg

round bar steel: div mm square edge steel: div mm L-beam: div mm No. 2984: 1 used plate, profile and bar shear with notcher 50 to manufactured by PEDDINGHAUS, type 210 / 13 Standard, built 1965 No. 3418: 1 used combined section shear 80 tonnes manufactured by PEDDINGHAUS, type 210 Super 16, built ca85 Cuonnbjt0a No. 3668: 1 used steel section shear + punching machine 95 to PEDDINGHAUS, type 210 Super 20, year of construction 1978 Space requirement 2.20 x 1.00 x 2.35 m, weight approx. 4.5 tonnes No. 3286: 1 used steel profile shear 65 to MUBEA / MUHR & BENDER, type KBL 16 N No. 1096 1 used hole punch 26 to EDEL SMO 26, various accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 45 mm square edge steel: 40 mm L-beam: 120 x 13 mm flat steel: 500 x 12 mm punching pressure: 60 t throat: 510 mm : 500 x 12 oder 400 x 16 mm punch diameter: 27 in 17 mm punch diameter: 39 in 12 mm oil volume: 80 l total power requirement: 7,5 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

incl. attached vise jaw width: 125 mm Auction-ID: A7-49089-159

Content consisting of a mandrel press, diameter: 170 mm and a small sheet metal shear, cutting length: approx. 70 mm and a larger sheet metal shear, cutting length: 200 mm Auction-ID: A7-49089-379

Operating voltage: 220/380 V Frequency: 50 Hz Rated current: 3.1/1.8 A with a total of two grinding machines Table dimensions: 290 x 170 mm and 380 x 190 mm Grinding wheel diameter: 100 mm and 200 mm Auction-ID: A7-49089-134

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, quick-change holder, turning tool holder, clamping holder, turning tool holder, lathe turret tool holder -Manufacturer: Kelch, tool holder steel holder -Socket: Ø 32 mm, bolt circle Ø 102x18 mm -Quantity: 1x holder available -Dimensions: 295/140/H110 mm -Weight: 8.8 kg

Cutting blades, replacement blades for guillotine shears, replacement cutting edges, cutting knives, shear blades, flat steel blades for profile steel shears, lever shears, sheet metal knives -Manufacturer: Peddinghaus, 3 cutting blades for profile steel shears 210/16 210 Super 16, unused -Zg. No.: 44085 510 00 Cutting length: 260 mm -Hole spacing: 140 mm / 2x M20 see photos -Submission/Price: complete -Dimensions: 280/18/H70 mm -Weight: 2.6 kg/pc.

round bar steel: 30 mm square edge steel: 25 mm L-beam: 28 x 10 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: - mm square edge steel: - mm L-beam: - mm total power requirement: 7,5 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 2,212,35 m div. punches and dies Foot switch Spare blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 50 mm square edge steel: 45 mm L-beam: 150 x 14 mm total power requirement: 4 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,3 x 1 x 2,1 m No. 3418 5-fold combined profile steel shears with flat steel shears PEDDINGHAUS 210 Super 16 pressure capacity 80 to Round steel 50 mm Square steel 45 mm angle steel 150 x 14 mm Punching up to 90 mm diameter 5.5 HP Space requirement 2.30 x 1.0 x 2.1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

punching pressure: 45.0 t punch diameter: 22 in 15.0 mm punch diameter: 38 in 8.0 mm round bar steel: 30.0 mm square edge steel: 25.0 L-beam: 100 x 10.0 mm shear: flat material: 300 x 12.0 mm adjustment of stroke: 0 - 55 mm work height max.: 940 / 1140 mm strokes per minute: 34 punch diameter: max. 110 mm voltage: 400 V total power requirement: 4.5 kW weight: 1245 kg dimensions: 1520 x 590 x 1700 mm In good condition () New price ~ 13.000 Euro Special price upon request Features: - Robust electro-hydraulic profile steel shear - With multiple workstations: Punching station Flat steel shear Angle/profile steel shear Notching station - Continuously adjustable stroke - Very compact design - Support table at the notching and punching station - Side support surfaces - 1x freely movable foot switch - Central lubrication system - Connection cable + connector The data for this ad was cre ...

DOEBELI D 175/150 ist eine Stähleschleifmaschine für Präzisionsarbeiten, mit hoher Genauigkeit und Zuverlässigkeit. Aufnahme für Schleifscheiben Ø 175 mm, Breite 20 mm. Hauptdaten: Anschluss 50 Hz, 3x 380 V; Leistung 0,6 CV; Abmessungen L 1000 x B 800 x H 1400 mm. Zubehör: neigbarer Werkzeughalter und Lampe. Ermöglicht enge Toleranzen; typische Einsatzbereiche: Werkzeugbau, Automobil, Luftfahrt, Uhrmacherei und Medizintechnik. Technische Daten ohne Gewähr

AGATHON 150 A ist eine Stähleschleifmaschine für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Schleifscheibe Ø150×20 mm, Bohrung 20 mm; Werkzeugspannbereich B32×H32 mm; Freiwinkel max. 26°; Spindeldrehzahl bis 2500 t/min. Technische Daten: Anschluss 3x 380 V 50 Hz, Leistung 0,7 CV, Gewicht ca. 225 kg, Abmessungen L850×B620×H1200 mm. Zubehör: Kühlmitteleinrichtung und Lampe. Ermöglicht enge Toleranzen; geeignet für Automotive, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

AGATHON 150 A ist eine Stähleschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsvermögen: Schleifscheibe Ø150 mm, Breite 20 mm, Bohrung 20 mm; Spindeldrehzahl bis 2500 t/min; Freiwinkel max. 26°; Spannbereich Werkzeuge Breite 32 mm, Höhe 32 mm. Technische Daten: 50 Hz 3x 380 V, Leistung 1.0 CV; Maschinengewicht ca. 300 kg; Abmessungen L820×B564×H1215 mm. Zubehör: neigbarer Werkzeughalter, Kühlmitteleinrichtung und Lampe. Ermöglicht enge Toleranzen für Automobil-, Maschinenbau-, Luftfahrt- und Medizintechnik sowie Uhrenindustrie. Technische Daten ohne Gewähr

AGATHON 175 A ist eine Stähleschleifmaschine, entwickelt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitskapazitäten: Schleifscheibe Ø175 mm x B 20 mm, Bohrung 20 mm; Werkzeuge bis B 32 x H 32 mm; Freiwinkeleinstellung max. 26°. Technische Daten: Spindeldrehzahl bis 2800 t/min; Anschluss 50 Hz 3x 380 V; Leistung 1.0 CV; Maschinengewicht ca. 300 kg; Abmessungen L820 x B564 x H1215 mm. Zubehör: neigbarer Werkzeughalter, Stahlhalterauflage. Erzielt enge Toleranzen; typische Branchen: Automotive, Feinmechanik, Werkzeugmaschinenbau, Luftfahrt, Medizintechnik Technische Daten ohne Gewähr

AGATHON 175 AR ist eine Stähleschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Schleifscheibe Ø175 mm × B35 mm, Bohrung 20 mm; Spannbereich Werkzeuge B32×H32 mm. Technik: Spindeldrehzahl ab 2800 t/min; Anschluss 50 Hz 3x 380 V; Leistung 1.0 CV; Gewicht ca. 300 kg; Abmessungen 1000×650×1400 mm. Zubehör: neigbarer Werkzeughalter, Kühlmitteleinrichtung, Lampe. Erzielt enge Toleranzen; geeignet für Automotive, Werkzeugmaschinenbau, Luftfahrt, Medizintechnik, Uhrenbau. Technische Daten ohne Gewähr

CLOTTU AB 175 is a Stähleschleifmaschine, ausgelegt für hohe Präzision, Genauigkeit und Zuverlässigkeit. Kapazität: Scheibe ø175 mm, Breite 35 mm, Bohrung 20 mm; Werkstück B30×H30 mm; Spindel ab 3000 t/min. Daten: 3×380 V 50 Hz, 0.75 CV, Gewicht ~215 kg, Abmessungen 900×600×1500 mm. Zubehör: Kühlung, Lampe, Plexi-Spritzschutz. Ermöglicht enge Toleranzen; Einsatz in Automotive, Werkzeugbau, Luftfahrt, Medizintechnik und Uhren. Technische Daten ohne Gewähr

AGATHON 175 A ist eine Stähleschleifmaschine, die Präzision, hohe Genauigkeit und Zuverlässigkeit bietet. Arbeitsdaten: Schleifscheibe Ø175 mm, Breite 20 mm, Bohrung 20 mm; Spindeldrehzahl bis 2800 t/min; Freiwinkel max. 26°; Spannbereich Werkzeuge bis 32×32 mm. Technische Daten: Anschluss 50 Hz 3×380 V, Leistung 1.0 CV, Gewicht ~300 kg, Abmessungen L820×B564×H1215 mm. Zubehör: neigbarer Werkzeughalter und Auflagetisch. Ermöglicht enge Toleranzen; geeignet für Automotive, Maschinenbau, Luftfahrt, Uhrmacherei und Medizintechnik Technische Daten ohne Gewähr

AGATHON 175 A ist eine Stähleschleifmaschine hoher Präzision, für Genauigkeit und Zuverlässigkeit. Kapazität: Schleifscheibe Ø175×20 mm (Bohrung 20 mm); Werkzeuge bis 32×32 mm; Freiwinkel max 26°. Techn.: Spindel bis 2800 U/min; 3×380 V 50 Hz, 1,0 CV; Gewicht ~300 kg; Maße 820×564×1215 mm. Zubehör: neigbarer Werkzeughalter, Kühlmitteleinrichtung. Sorgt für enge Toleranzen; Einsatz: Automotive, Uhrenbau, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

AGATHON 175 ist eine Werkzeugschleifmaschine mit hoher Präzision, großer Genauigkeit und zuverlässigem Betrieb. Angaben zu Arbeitskapazitäten (Durchmesser, Längen, Wege) liegen nicht vor. Technische Daten (Spindeldrehzahlen, Vorschübe, Stromversorgung, Abmessungen, Gewicht) sind nicht angegeben. Ermöglicht das Erreichen enger Toleranzen und eignet sich typischerweise für Automobil-, Uhren-, Maschinenbau-, Luftfahrt- und Medizintechnik. Technische Daten ohne Gewähr

F35 Office Workstation table ✔️ Specification: Length: 101" L × 50" W × 81" H ✔️ Comes with built-in drawers for storage ✔️ Spacious surface, ideal for office or study use If interested, kindly contact : DAMIA, n.damiatopglove.com.my ARINA arinatopglove.com.my TG MEDICAL SDN BHD - FACTORY F35

Profile steel shears, 80/110, Mas. No. 4423251690035 See photos

Large basket welding machine, Fabr. Züblin = Machine data of the automatic welding machine: - Range of inner reinforcement diameter 1,465-4,100 mm - Diameter of the longitudinal wires: 6-10 mm - Number of longitudinal wires: 12 or 24 - Length of cylindrical reinforcement: any mm - Weight of the entire system: approx. 26.0 t - Foundation dimensions: approx. 14.0 x 11.5 m Basket in basket production possible, i.e. for large-diameter pipes that have to be manufactured with a double basket from a static point of view Basket production is also possible with this system

consisting of approx. 33 pieces , mostly equipped with turning steels and insert holders, types: CD 45170, C40170 and C32/150 Auction-ID: A7-49089-362