tank stainless steel used for sale

Double-tubing stainless steel tanks very stable quality. Suitable for cooling with a net content of 2500 l

Stainless steel container with manhole 500 litres capacity Derivative: NW 50 Dimensions in cm: 120 height x 93 length x 74 width

General SKU200W003 MakeInotec TypeReblend tank No.IN110/15037 Year of construction2015 LocationBarneveld Main Features MaterialStainless steel Volume1600 Ltr. Specified Features - Vertical tank Closed vertical tankcheck Capacity400 Ltr. (4x) total 1600 Ltr. Vessel sizesDia. 800x1000 mm Dished topcheck With covercheck Dished bottomcheck OutletDia. 65 mm Max. temperature100°C MaterialStainless steel 1.4401 (316) General With switchgear( as is) Floorspace4,30x1,25 m Total height2,30 m Weight1000 kg CEcheck Extra SpecificationsStainless steel mounted dosing systemyear of construction 2015, CE, volume 4x 400 ltr, stainless steel 316L, design temp 0-100ºCwith Endress+ Hauser flow meters, Indi flow valvesGeneric medicinesOintmentsFine chemicalsOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Ot ...

20,000 liters tank with thermal insulation not used tanks

Two stainless steel tanks with drain. About 1500 l individual was sold

stainless steel process tank capacity 0.25 m3 heating jacket thermal insulation stirrer for dense masses

Size dia 1500x1900mm

Centrifugal pump, acid pump, alkali pump, water pump for groundwater lowering pump -Centrigeminal pump: with stainless steel tank -Motor: 2.2 kW -Flow rate: 1900 l/min -Pumping height: 15 m -Tank capacity: approx. 500 liters -Overall dimensions: 1080/920/H1190 mm -Weight: 126 kg

horizontal stainless steel tank, can be ordered with 6 brackets Volume; 85 m³ Dimensions: Ø 3.10 × 12.0 m long

upright stainless steel tank with flat bottom Weight: 3 tons Volume: 43.5 m³ Dimensions: Ø 3.10 m × 6.15 m high

upright stainless steel tank, flat bottom Volume: 15 m³ Dimensions: Ø 2.60 m × 3.40 m high

upright stainless steel tank, incl. agitator Volume: 6 m³ Dimensions: Ø 2.24 m × 2.80 m high incl. agitator, cylindrical height 1.54 m

upright stainless steel tank Volume: 6 m³ Dimensions: Ø 2.40 m × 1.90 m high

horizontal stainless steel tank, double-walled, insulated, oval, with feet Volume: 5.2 m³ Dimensions: Ø 2.05 m wide × 2.80 m long x 1.80 m high incl. feet

upright stainless steel tank, incl. agitator Volume: 3.3 m³ Dimensions: Ø 1.66 m × 2.50 m high incl. agitator, cylindrical height 1.54 m

upright stainless steel tank, bottom with cone. with feet, pressure tank with cooling zones Volume: 2.7 m³

horizontal stainless steel tank, oval, with feet Volume: 2.3 m³ Dimensions: 0.70 m wide x 2.30 m long x 1.50 m high and 0.20 m high feet, total height 1.70 m

horizontal stainless steel tank, double-walled, insulated, with feet Volume: 1.6 m³ Dimensions: Ø 1.20 m × 2.06 m long, total height with feet 1.80 m

Stainless steel tank, upright, cube Volume: 1 m³ Dimensions: 1.0 m wide × 1.2 m long × 1.60 m high

upright stainless steel tank, with feet Volume: 1.5 m³ Dimensions: Ø 1.10 m × 2.10 m total height incl. feet Feet 30 cm, dome top Outlet under the tank with flange Ø 4.5 cm Outlet at the bottom of the floor Ø 6.5 cm, without tap

Industrial Processing Tank – 19,517 L Working Capacity (2006) High-capacity industrial processing and storage tank designed for hygienic handling of liquid food products in beverage and dairy processing environments. The tank offers robust construction, high temperature tolerance, and pressure capability suitable for modern production lines. General Information - Year of Manufacture: 2006 - Condition: Used, operated only for a short period Capacity - Working Capacity: 19,517 liters Technical Specifications - Maximum Pressure: 4.0 bar - Maximum Temperature: 145 °C Dimensions - Outside Diameter: 2,570 mm - Total Height: 6,830 mm Key Advantages - Large 19,517 liter working capacity - Suitable for high-temperature processing applications - Designed for pressure-resistant operation up to 4.0 bar - Ideal for dairy, beverage, and liquid food processing - Robust  ...

Characteristics: volume 32000 L material V2A (AISI 304) 1.4301 Outside surface 2B=IIIC ground Surface inside 2B=IIIC ground Total height 7500 mm Cylinder height 4600 mm inner diameter 3400 mm Number of feet 4 Last use corrosive liquid Description: MJ UNI-HIGH Topsoil: dished end Wall thickness 8.3 mm 4 crane eyes CIP cleaning Manhole Filling nozzle pressure gauge Tank cylinder: Manhole DN 500 Clear drain connecting piece Wall thickness 2.4 mm Underbody: dished end Flange connection Residual drain with flanges 4 fixed feet with domes with reinforcement with lateral reinforcement Wall thickness 8.1 mm

1,000 litre hot water tank/storage tank Characteristics volume 1000 L material V2A (AISI 304) 1.4301 Total height 2600 mm Cylinder height 1100 mm inner diameter 1000 mm Outside diameter 1120 mm Outside surface 2B=IIIC ground Surface inside 2B=IIIC ground Year of construction 2013 Design vertical Last use chemical industry Insulation 60 mm Operating temperature range 20-95°C Description MJ UNI-HIGH Topsoil: Flat floor with 3% slope crane eye Manhole DN 400 2 x connection CIP cleaning with line Connection Tank cylinder: Ladder hook Level measurement Underbody: Residual drain pipe with T-piece with 2 butterfly valves 3 fixed feet with domes

Properties: Volume 24000 L Year of manufacture 1976 Overall length 4400 mm Cylinder length 3400 mm Total height 4000 mm Diameter 3000 mm Material V2A (AISI 304) 1.4301 Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Horizontal design Number of feet 4 Description: MJ UNI-HIGH Tank crest: Supply pipe CIP Ball Cathedral In front: Manhole 520 x 410 with sample tap Filling line Flange 200/219.1 DIN2632 PN10 WNR 1.4541 68715 Residual drain with outlet surround with disc valve DN 60 Below: 4 fixed feet with reinforcement ring

Properties: Volume 35000 liters Total length 6500 mm Cylinder length 5500 mm Diameter 3400 mm Material V2A (AISI 304) 1.4301 Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Insulation 200 mm Horizontal design Number of feet 6 Last use nitric acid - in dairy operations Description: MJ UNI-HIGH Tank crest: Supply pipe CIP Ball 2 x Small Connectors Fill measurement connection In front: Manhole 520 x 410 with sample tap Filling line Flange Residual drain with outlet surround with disc valve DN 60 Below: 6 fixed feet with reinforcement ring

1,000 liter water tank/storage tank Characteristics volume 1000 L material V2A (AISI 304) 1.4301 Total height 1800 mm Cylinder height 1100 mm diameter 1000 mm Weight 170 kg Outside surface 2B=IIIC ground Surface inside 2B=IIIC ground Year of construction 2008 Design Vertical Last use chemical industry Description: MJ UNI-HIGH Topsoil: flat bottom Dome DN 400 Connection Underbody: Remaining process 3 feet with domes

Grundy Tank 400L / 90Gallon Insulated and Clad in welded Stainless Steel 50mm of insulation Bolted top lid with internal cooling coil attached Temperature probe pocket working pressure 30psi This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Vertical Cylindrical Transportable Tanks. Stainless Steel 700L Approx. Insulation, temp probe pocket port, carbonation stone port, sample tap port. Previously used for carbonating beer. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Transportable 1000L Bulk Container Tank Manufacturer: Bison Stainless Steel, Top Entry Manway. Previously used for spirits This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Equipment: Heatable/coolable,Manufacturer: Hinke Tankbau,Condition: used,Volume: 53,000,Design: horizontal,Standing shape: feet,Number of feet: 6,Heating/cooling (filter bar): available,Temperature control cylinder: rectangular half-tube coil,Diameter inside: 3,000,Cylindrical length: 6750,Total length: 7,900,Type plate: Yes,Outlet: available,Remarks: 3 reinforcement rings Fe with 2 feet each (Attention: tank diameter lower than tank feet should be noted when setting up) 1 manhole in the front floor, Last purpose: Brewery,Material in contact with the product: V2A 1.4301 (AISI304),Material

Stainless steel tanks Manufacturer: Becker Tankbau Capacity 14.250 litres Cylindrical stainless steel container, single-walled, no agitator Diameter 2.40 m, total height approx. 4.10 m

Stainless steel tanks Manufacturer: Becker Tankbau Capacity 14.250 litres Cylindrical stainless steel tank, lower third with double jacket for heating and cooling, upper part single-walled, no agitator Product space: pressureless, operating temperature 30 °C Boiler room: 1 bar, operating temperature 50 C Diameter 2.40 m, total height approx. 4.10 m

Stainless steel tanks Manufacturer: Becker Tankbau Capacity 14.250 litres Cylindrical stainless steel tank, lower third with double jacket for heating and cooling, upper part single-walled, no agitator Product space: pressureless, operating temperature 30 °C Boiler room: 1 bar, operating temperature 50 C Diameter 2.40 m, total height approx. 4.10 m

Stainless steel tanks Manufacturer: Becker Tankbau Capacity 14.250 litres Cylindrical stainless steel container, single-walled, no agitator Diameter 2.40 m, total height approx. 4.10 m

Buffer tank, isolated. lying Steel tank with a volume of 27,500 L Dimensions: Ø 2.50 m × 7 m long Weight: 8 tons Insulation: 15 cm thick

15,000 liter sugar tank/storage tank Characteristics: volume 15000 L Total length 4300 mm Cylinder length 3350 mm Total height 3600 mm diameter 2500 mm material V2A (AISI 304) 1.4301 Outside surface marbled Surface inside 2B=IIIC ground Design Horizontal Number of feet 6 Description MJ UNI-HIGH Tank crown: Inflow 2 mushrooms 2 x Cathedral Digital level measurement Floor slope 3% In front: Cone bottom Manhole 420 x 360 mm with magnetic safety device 2 x line connections - front and rear CIP Residual drain with butterfly valve DN 100 Below: 6 trumpet feet with domes - height adjustable on steel supports

22,000 liter sugar tank/storage tank Characteristics: volume 22000 L Total length 5500 mm Cylinder length 4500 mm Total height 3500 mm diameter 2500 mm material V2A (AISI 304) 1.4301 Outside surface marbled Surface inside 2B=IIIC ground Design Horizontal Number of feet 8 Description MJ UNI-HIGH Tank crown: CIP Management 3 x Connections In front: 2 sight glasses Manhole 470 x 400 mm Circuit Below: Residual drain pipe with disc valve 8 trumpet feet with domes - height adjustable on steel supports

3,800 liter rinsing milk tank/storage tank made of V2A Characteristics: volume 3800 L material V2A (AISI 304) 1.4301 Total height 2400 mm Cylinder height 1100 mm inner diameter 1850 mm Outside surface marbled Surface inside 2B=IIIC ground Design Vertical Number of feet 3 Description: MJ UNI-HIGH Topsoil: Flat floor with 3% slope threaded connector CIP ball Manhole Ø 540 mm vent nozzle Tank cylinder: 2 x Step Arches 2 x Disc Valve Underbody: Cone bottom drawn from outside to inside Residual Drain Pipe 3 solid feet

P311 - used approx. 110 m³ / 110,000 L GF-UP tank, standing on stand frame or horizontal, with chemical protective layer. Technical details: Capacity: approx. 110 m³ / 110,000 litres Material: glass fibre reinforced plastic, GF-UP Manafacture: Reich-Tank Year of construction: 2005 DIBT bauaufsichtl. Approval: Z-40-11-117 Specific gravity: min. 1.06 kg/L Dimensions: Ø approx. 3.00 m × H total approx. 19.05 m Other: Used tank made of glass fibre reinforced plastic / GF-UP, with inner chemical protective layer, professionally cleaned and in good condition. Standing, above-ground storage container on stand frame, incl. ladder and roof platform, dome on the side of the tank and on top of the roof, several inlets and outlets. Former silo for the storage of biogas and 9% sulphuric acid, including container statics and expert opinion to prove suitability according to §19 g/h WH ...

Diesel filling station - Home filling station - Gas station - Small filling station composed of: 1 x 20m³ storage container - brand new 1 x fuel dispenser type eco 75 - brand new Description steel tank: 20,000 litres capacity according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 6.90 m - D = 2.00 m - weight app ...

P427 - used approx. 30 m³ / 30,000 litre HDPE tank, plastic tank, double-walled, flat-bottom tank. Technical details: Content: approx. 30 m³ / 30,000 litres Material: HDPE tank, plastic tank Manufacturer: Formoplast Specific gravity: min. 1.55 kg/L Dimensions: approx. Ø 3.49 m × H total approx. 5.50 m Certification mark: PA-VI 321.103, AHL/ASL listed Other: Used HDPE tank in good condition, inside professionally cleaned, from the outside as shown in the pictures. Above-ground storage tank for outdoor installation, standing on flat floor, double-walled with outer tub, dome on top of the roof, several inlets and outlets, opaque, incl. railing on top of the roof. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. If the ladder fits on the truck, it can be supplied. This container can be used as a storage tank for many different media ...

Double-walled steel tank. Price is negotiable. Shipping possible. The sale is carried out on behalf of the customer. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.

Farm petrol station - company petrol station - diesel petrol station composed of: 1 x 16 qbm steel tank - brand new 1 x Nozzle type K-80 - brand new Description of storage containers: 16,000 litres capacity according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 8.50 m - D = 1.60 m - weight approx. 3.5 tons. - ex works, fre ...

Fire water tank, rainwater tank Steel tank with a volume of 50,000 L Weight: 14 tons Dimensions: Ø 3.00 m × 8.5 m long

Fire water tank, rainwater tank, water tank Steel tank with a volume of 40,000 L, upright Dimensions: Ø 3.20 m × 8.00 m high

Fire water tank, rainwater tank double-walled steel tank with a volume of 30,000 L Dimensions: Ø 2.50 m × 10 m long

Water tank Steel tank with a volume of 25,000 L Dimensions: Ø 3.20 m × 4.50 m high

Steel tank, horizontal, double-walled, with leak detector Volume: 7,000 L Dimensions: Ø 1.60 m × 3.50 m long

Tank container 26,000 L tank and apparatus construction Manufacturer: Tank und Apparatebau Neesen Segler GmbH&Co.KG Built: 1993 Room capacity: 26,000 L Danger Class: AIII Inside rubberized, monitored Condition: good

Storage tank containers tank containers (diesel, canola oil) for heat and power generation Built in 2006 24,000 L capacity with agitator Manufacturer: Krampitz tank systems TÜV Hannover / Sachsen Anhalt