134,809 used machines on RESALE, but how to find them? Machine Search
Wielton NW-3 S5 SDJ steel tipper trailer – 42 ton – lift axle – HYVA – 2015 Specifications: Brand: Wielton Type: NW-3 Version: S5 Version: SDJ Year of construction / first admission: 27-11-2015 Chassis number: SUDNW30000051675 Version: 3-axle tipper trailer Chassis: Steel Tipper body: steel Tipping direction: hydraulic backward tipping Tipping installation: HYVA Assen: SAF-Holland SBS 2243 Technical axle capacity: 9,000 kg per axle Suspension: air suspension Tyre size: 385/65 R22.5, 164K/158L Number of wheels: 6 Own weight: 7.800 kg Permissible total weight: 42,000 kg Technical total weight: 42,000 kg Payload: 34,200 kg Length: 11,070 mm Width: 2,550 mm Wheelbase: 8,120 mm Center coupling to rear: 9,490 mm Maximum construction speed: 100 km/h Features: HYVA hydraulic tipping installation Lift axle with manual lifting/lowering control WABCO ...
Steel winch, rack and pinion winch, stick winch DKF PILLOW Block BEARING PLANT Type 1010 Lifting capacity: 10.0 t Attachment height: 90 / 700 mm stroke: 300 mm used, tested ! Dimensions: 700 x 450 x 230 mm
Tensioning lever OTTO GANTER (presumably) 10 pcs. steel clamping lever adjustable M16 / 80 mm (GN 212.3-33-M16-80-D) 180 x 150 x 35 mm New !' Dimensions: (total) approx. 200 x 200 x 200 mm
miscellaneous Different holders with Recordings
In and including 4 yokes, longest length approximately 6 meters Auction-ID: A1-50447-113
Steel Winch, Rack and Pinion Winch, Stick Winch DKF PILLOW Block BEARING PLANT Type 0310 Heavy Duty Type Lifting Capacity: 3.0 t Attachment Height: 70 / 700 mm Stroke: 400 mm Used, Tested ! Dimensions: 710 x 220 x 210 mm
Profile steel shears, hand lever shears SCHERENBAU NOSSEN ScDH 10 Knife length: 180 mm round: 24 mm square: 22 mm angle: 60 x 7 mm continuous: 10 mm drivable ! used, tested ! Dimensions: 1300 x 700 x 1600 mm
round bar steel: 32 mm square edge steel: 30 mm L-beam: 80 x 80 x 8 mm : 80 x 13 mm : 36 t throat: 170 mm work stroke: 28 mm work height max.: 980 mm material thickness: 28 x 13 mm hole diameter in sheet thickness: 25x10 / 30x8 mm total power requirement: kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 1,2 x 0,8 x 1,9 m Profile steel scissors with - 4 workstations - 1 foot trigger - hydr. drive - Support tables - Rectangular notcher - Hole punch including tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bunker installation, consisting of: (3x) steel bunker, dimensions: (3x) 4110 mm x 4260 mm x 4051 mm. (2x) dividing transport belts. Total dimensions installation: 13500 mm x 4070 mm x 6000 mm.
Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat bar Support table on the punching side with stops Range of tools is included in the price Weight: 3,000 kg
Cold work tool steel 4 pcs Diameter 299 Length 232mm Weight 191.5kg Wnr. 1.2379, X153CrMoV12 EN/ISO 4957 forged, annealed, peeled, or overturned, round DIN 7527 Bl.6
round bar steel: 30 mm square edge steel: 28 mm L-beam: 90 x 8 mm : 150 x 8 mm pressure: 35 t total power requirement: 2,8 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 0,75 x 1,0 x 1,5 m Profile steel shears combined with: - Foot switch - Length cut The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1000 Pieces / Box 2 boxes in stock
Steel tubes ST 37 galvanized, thick-walled, 5 mm material thickness, Diameter = 57 mm, Length = 3360 mm Unused, partly slight flash rust, slightly dirty, photos are older. Price for individual purchase, quantity discount possible from 25 pcs., approx. 150 pcs. available.
1000 Pieces / Box 4 boxes in stock
Format: 13x33x0.6 mm for plastic belt, galvanised 1000 Pieces / Box 2 boxes in stock
The scope of delivery includes: 06x Steel panel, used Manufacturer: SSI Schaefer Total depth: approx. 960 mm Inner depth: approx. 955 mm f. Stand depth: 950 mm Total width: approx. 300 mm Material thickness: approx. 2.50 mm Material colour: sendzimir galvanised Frame profile: approx. 300 x 40 x 20 mm Weight|pcs.: approx. 7,940 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
The scope of delivery includes: 01x U-profile, used Material colour: orange Overall length: 2,480 mm U-profile: 100 x 50 mm Slotted hole: 40 x 15 mm Material thickness: approx. 6.00 mm Weight | Pcs.: approx. 26.31 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
Overhauled: 1999 Shear force: 2000KN Cycle rate: 59/min Achievement; Round steel up to D 63 mm, square steel up to 55 mm Machine weight: 7350 kg Dimensions:2260 x 2920 x 1770 mm Hewvu Nev Ta Ucju Isk Bar feeder with separation: Max. pole length: 6m Dimensions: 6.3 x 1.75 x 2.25 m Weight: 4000 kg Machine is still energized.
turning speed range - grinding spindle: 4500 U/min max diameter of the vice bore: 17,5 mm max. radius to grind: max. 10 mm max. lateral adjust. of milling cutter: 10 max. longitudinal adjust. of milling cutter: 40 max. angle for relief grinding: 45 Grad weight of the machine ca.: 125 kg Operating instructions available including collet set, grinding wheel flange wrench and the following special accessories: - Aluminium oxide grinding wheel - 3 diamond grinding wheels, different versions - 1 additional grinding wheel holder with diamond grinding wheel - Dressing diamond - Grinding dust cover The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. punching and shearing capacity: 400 kN For example, punches 20 mm holes in 15 mm steel Shears on the flat steel shear on 120 mm to 12 mm steel Further technical data on request With an assortment of stamps and dies as desired
Dismantled shed / shed 36 x 12 m – galvanized steel construction with wooden purlins Complete dismantled shed/shed construction, originating from a building with a size of approximately 36 x 12 m. The construction consists of galvanized steel uprights, roof beams/trusses, tubes and wooden purlins. The warehouse has been completely dismantled and stored ready for transport. The steel structural parts are clearly arranged in racks and the wooden parts are bundled and stacked. Specifications: Dimensions shed / shed: approx. 36 x 12 m Number of uprights: 20 pieces Length of posts: approx. 4,200 mm Number of beams / roof beams: 20 pieces Length of beams: approx. 5,330 mm, measured from standing column towards ridge / over the longest distance Number of tubes: 11 pieces Number of wooden purlins: approx. 108 pieces, consisting of 78 + 30 pieces Length of wooden purlins: approx. ...
Measuring and marking plateCast steel-grey cast iron heavily ribbedLength 1000 mmWidth 1000 mmThickness 54/225 mmWorking height approx. 800 mm- 4 pieces feet with adjustment screws for aligning the plateWeight 390 kggood surface; used
Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/AMasch. No. 9566 Year of construction approx. 2000Punching force 80 ton. Projection 300 mmPunching up to 40 mm in 14 mm sheet metalFlat material shears 450 x 15 mmAngle steel shears 130 x 130 x 13 mm4 edge shears 45 x 45 mmRound material shears 45 mmRectangular clinker up to 12 mmMotor power 5.5 kWNeching connection 400 volts, 50 Hz stop with el. Stroke release 500 mm - work table with stop at the hole device 550 x 380
20,000 litre, Stock number: T1168, Litre: 20000, Material: Steel 37, In stock: Yes, Amount in stock: 1 pc., Item: Silo, Standing: On the shroud, Top: Conical, Bottom: Conical, Insulated: Yes, Outer cladding: Trapezoidal steel sheet, Manway: In the top, Dimensions: H 6650 x D 2850 mm, Inner diameter: Ø 2650 mm, Cyclone: At the top, Cell sluice: In the bottom, Vibrator outlet: In the bottom
Straightening and welded plate cast steel-grey cast iron strongly ribbedLength 2000 mmWidth 1200 mmThickness 150 mmWorking height 800 mmPanel thickness 35 mm- Substructure made of solid woodWeight approx. 950 kgGood surface; used
Straightening and welding plate cast steel-grey cast iron heavily ribbedheavy straightening plateLength 3050 mmWidth 2000 mmThickness 300 mmPanel thickness approx. 55 mm throughoutWeight approx. 4.5 ton.Good condition; used
maximum number of results exceeded
please refine your search
7.950 € 
