129,523 used machines on RESALE, but how to find them? Machine Search
Grinding wheel diameter: approx. 60 mm
Lot of MIG welding wire steel G3Si1 rolls - Ø1.0 mm (D300 / 15 kg per roll) Weight: 725KG net
Profile steel shears, hand lever shears SCHERENBAU NOSSEN ScDH 10 Knife length: 180 mm round: 24 mm square: 22 mm angle: 60 x 7 mm continuous: 10 mm drivable ! used, tested ! Dimensions: 1300 x 700 x 1600 mm
" Locksmith/precision angle (90°), steel, in wooden boxes Marking (on the boxes): • Russian inscribed: "Угольник слесарный" • 100 mm, class 1 • GOST 3749-65 • "Сделано в СССР" (Made in USSR) Number of pieces: 7 pieces Condition: • several angles as good as new / very little used "
Bundle steel tube; diameter 51mm; Number of tubes on a bundle is 51 pieces
Sold without content Batch that is part of a combination of batches
Batch of industrial bearing housings & various steel clamp bushes 261KG
Batch of galvanized steel brackets, clamps and mounting plates (453KG) Weight: 453KG net
Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat bar Support table on the punching side with stops Range of tools is included in the price Weight: 3,000 kg
Steel tubes ST 37 galvanized, thick-walled, 5 mm material thickness, Diameter = 57 mm, Length = 3360 mm Unused, partly slight flash rust, slightly dirty, photos are older. Price for individual purchase, quantity discount possible from 25 pcs., approx. 150 pcs. available.
Buyer is responsible for proper and safe dismantling on the collection day
Cold work tool steel 4 pcs Diameter 299 Length 232mm Weight 191.5kg Wnr. 1.2379, X153CrMoV12 EN/ISO 4957 forged, annealed, peeled, or overturned, round DIN 7527 Bl.6
1000 Pieces / Box 2 boxes in stock
1000 Pieces / Box 4 boxes in stock
Format: 13x33x0.6 mm for plastic belt, galvanised 1000 Pieces / Box 2 boxes in stock
The scope of delivery includes: 06x Steel panel, used Manufacturer: SSI Schaefer Total depth: approx. 960 mm Inner depth: approx. 955 mm f. Stand depth: 950 mm Total width: approx. 300 mm Material thickness: approx. 2.50 mm Material colour: sendzimir galvanised Frame profile: approx. 300 x 40 x 20 mm Weight|pcs.: approx. 7,940 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Dismantled two-aisled hall supporting structure with the reference no. hbs1789f2 (L 41.5 x W 43.1 x H 10.3 m) as a section of an originally three-aisled industrial hall. In the second life cycle, the section of approx. L 41.5 x W 43.1 x H 10.3 m to be sold could be used for the construction of a sorting hall, production/storage hall, workshop with overhead crane, etc. APPROXIMATE DIMENSIONS: Built GFA: approx. 1789 sqm; Hall length: approx. 41.50 m; Longitudinal grid: approx. 10.24 m MM frame supports; Hall width: approx. 43.11 m AK frame supports; Hall width: approx. 21.1 + 21.1 m MM columns; Clear height: approx. 9.37 m UK Frame - Binder; HALL STRUCTURE: Bolted flat roof frame construction made of hot-rolled and primed/painted steel profiles with frame supports made of IPB / HEB 900 and frame trusses made of IPBl / HEA 900. The roof substructure consists of hot- ...
The scope of delivery includes: 01x U-profile, used Material colour: orange Overall length: 2,480 mm U-profile: 100 x 50 mm Slotted hole: 40 x 15 mm Material thickness: approx. 6.00 mm Weight | Pcs.: approx. 26.31 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
Overhauled: 1999 Shear force: 2000KN Cycle rate: 59/min Achievement; Round steel up to D 63 mm, square steel up to 55 mm Machine weight: 7350 kg Dimensions:2260 x 2920 x 1770 mm Hewvu Nev Ta Ucju Isk Bar feeder with separation: Max. pole length: 6m Dimensions: 6.3 x 1.75 x 2.25 m Weight: 4000 kg Machine is still energized.
Max. punching and shearing capacity: 400 kN For example, punches 20 mm holes in 15 mm steel Shears on the flat steel shear on 120 mm to 12 mm steel Further technical data on request With an assortment of stamps and dies as desired
Key data: 45 mm, 130 mm, 13 mm
Punching force: 70 ton Punching capacity: Ø 28 in 20 mm steel Projection: 300 mm Scissors: 130 x 130 x 13 mm angle steel 90º 450 x 15 mm flat steel 45 mm round steel Notching: 100 x 13 mm Equipped with: - Electric length stop 1000 mm - Various accessories - 2 stations machine Country of origin: Spain Motor power: 7.5 kW Machine LxWxH: 2000 x 1200 x 2000 mm Machine weight: 2000 kg
Measuring and marking plateCast steel-grey cast iron heavily ribbedLength 1000 mmWidth 1000 mmThickness 54/225 mmWorking height approx. 800 mm- 4 pieces feet with adjustment screws for aligning the plateWeight 390 kggood surface; used
Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/AMasch. No. 9566 Year of construction approx. 2000Punching force 80 ton. Projection 300 mmPunching up to 40 mm in 14 mm sheet metalFlat material shears 450 x 15 mmAngle steel shears 130 x 130 x 13 mm4 edge shears 45 x 45 mmRound material shears 45 mmRectangular clinker up to 12 mmMotor power 5.5 kWNeching connection 400 volts, 50 Hz stop with el. Stroke release 500 mm - work table with stop at the hole device 550 x 380
A Lissmac steel brushing and deburring machine is available. Passage width: 1500mm, max. sheet thickness: 20mm, medium: brushing block, machine dimensions X/Y/Z: approx. 3100mm/1400mm/1800mm, weight: approx. 2300kg. Documentation available. On-site inspection is possible.
maximum number of results exceeded
please refine your search
10 € 
