tandberg data used for sale

Ladies and gentlemen, we are happy to offer you wheat flour in different categories to be able to offer. Please send us your request. We will be happy to answer your request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. i ...

Technical data: Double column vertical turret lathe CNC control Siemens 802 D Weight 66 to 63 kw Dimensions 13,600 x 9,800 x 6,750 mm Faceplate diameter 3,500 mm Maximum workpiece height 2000 mm Max support adjustment 30 ° Maximum workpiece diameter 4,000 mm Maximum workpiece diameter with page support 3,750 mm Number of support 2 Max turning height 1,400 mm Maximum workpiece weight 25 to Max speed 30/min Min. speed 1/min

Ladies and gentlemen, below the offer for a used 200 beds hospital The entire technology can be checked before handover. Prices: on request We are also happy to offer you other new and used medical devices. We would be pleased to have your request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire transport process is carried out at the buye ...

Industrial replacement monitor 12.1 TFT monitor High-quality anti reflective glass incl. cable with 15-pin. D-Sub-Plug Technical Data: TFT-LCD Monitor 12.1 inch Display/Resolution 800 x 600 Pixels Brightness 400 cd/m2 Contrast ratio 500:1 Response time 8 ms Frequency 60 hz Display range 246 x 185 mm External power supply 12V Operating power unit -10c +60 celectricity consumption max. 30 W connection D-Sub 15-pol, 2 row OSD control Brightness, contrast control, auto-adjustment phase position, clock, instalment speech, reset connection cable, power supply The Front panel is not included in the offer. The installation is carried out on the existing front panel. 24 Month Warranty! More monitors, new and used on request! ; New!

The NEXUS of 7501 is the cheapest universal hardness testing machine with currently available technology: This hardness testing machine sets the benchmark in quality and price in the device class with proven swivel mechanism (motor switch between Indenter and lens): never get a comparably-equipped machine of this quality at such a fair price. In the standard version are already integrated: USB camera + software for the automatic measurement of impression of hardness -electronically controlled test load application with load cell in closed-loop -integrated boxed PC (WIN 7), LAN connectivity, result export, hardness testing software IMPRESSIONS -integrated touch-screen monitor for a simple, direct touch control -LED lighting, Brinell with ring light The machine is universally suitable for all classic metal hardness testing (test loads 0.5 250 kg). Due to the modern, quality equip ...

ndustrie replacement monitor 12.1 TFT monitor Matching for lid machines with dialog 11 control High quality anti reflective glass Technical data: TFT-LCD Monitor 12.1 inch display/exposure 800 x 600 pixels brightness 40 0 cd/m2 Contrast ratio 500:1 response time 8 ms frequency 60 hz display range 246 x 185 mm External power supply 12V operating power system -10c +60c power consumption max. 30 W connection D-Sub 9pol. 2 consecutive OSD control Brightness, contrast adjustment, auto adjustment phase position, clock, voice installation, reset accessory: cable, power supply 24 months warranty! More monitors, new and used on request!; New

NEMESIS 9000 are high-quality, modern, by INNOVATEST developed and produced hardness tester. These versatile machines combine groundbreaking technologies and extensive facilities in a machine body with a modern design. The basic function of the hardness concept is based on a settled on the test piece nose cone's mounted a turret with up to 8 positions. The desired hardness test method can be choiceed conveniently on the large touch screen monitor by means of Visual, intuitive user interface (control and evaluation software IMPRESSIONS. Now, the operator presses START and starts the automated testing: -automatically the turret swivels the correct Indentor / lens -using search drive, the specimen surface is contacted and focused (Vickers / Brinell) -now the impression generated power-regulated -then the integrated image analysis software automatically evaluates the impression of h ...

CARVING MACHINE type MARIANI PL 8 I Volt. 380/50 with Inverter rotary device for the simultaneous rotation of the model and the pieces (3D) manual chuck of mandrins unit also to work with flat pieces Technical Data : n. 8 spindles distance betwen spindles mm. 400 rotation speed by Inverter . rpm min. 9600 / max. 17400 max. working length ( on rotation ) mm. 2100 net weigth kgs. 2500 overall dimension mm. 5000 x 3000 H=mm.1500

Technical data: Application: Laser, plasma and autogen cutting, grinding and welding materials: steel and stainless steel sheets, dry and oil-free cartridges / electric valves: 6 / 6 Nominal volume flow: 3,600 m3/h (at cartridge load of 600 m3/h) Filter area: 84 m2 (21 m2 per cartridge) Dustcollection of Air input diameter: 300 mm Air outlet diameter: 350 mm air temperature/humidity: < 60 C / < 50 % Total oil concentration: 3 mg/m3 compressed air: at least 6-7 bar on Feed-in point, dry and oil-free compressed air consumption: max. 18 Nm3/h - x 50 NLiter s per pulse with max. 6 per minute Filter level: 99.99% Dust emission: < 1 mg/m3 control cabinet: 400 V, 3 phases, 50/60 Hz Control unit: 24 VAC, 50 Hz Geraeusch Level: < 73 dBA x 2 dBA plus pulse surcharge of < 10 dBA x 2 dBA Color: RAL 5015 Width x Depth: 1,305 x 1,382 mm Weight: 640 kg Engine: 7.5 kW 13.2 A 32 A 4.234 Pa ...

Ladies and gentlemen, We are pleased to offer you a hand bagging machine. If necessary, we can send you pictures and specifications. Please send us your request. We will be happy to answer your request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the  ...

Data processing!

CNC plasma cutting system working range: 1500 x 3000mm OTC Superplasma 12000 Cutting up to 20mm quality cutting New control ProDNC from Micompan data transfer via USB; ready to use

new BARUFFALDI turret for Gildemeister lathe. Tool recording VDI 40. No other data is available. 6 month warranty; as

Properties < b >: < / b > Used Roller converter of manufacturer Overbeck Feet to be ordered separately Condition: fully functional with traces of use Ideal for the fast material handling Expertly disassembled and packed Interroll motor roller v-belt drive maximum width 68cm packages that can be implemented to converter < b > < /b > Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. Technical data < b >: < / b > Mass of the roller length: 2000 mm Total width: 600 mm Segment length: 750 mm the role < /b > details < b > Clamping length: 450 mm Diameter approx: 50mm Length: 100mm Material: Steel, galvanised the framework < /b > details < b > Frame height: 135mm Frame width: 30mm Ma ...

Description: heavy double grinding buck (Leipzig Iron and Steel Works) with chip container Technical data Grinding wheel permeser 400 mm Operating voltage 380 volts Drive power 4 KW Weight approx. 340 kg Dimensions (LxWxH) 1100 x 1150 x 1120 mm

Manufacturer: Heinrich KöllschenMaschinefabrik Rheydt Model: on the 2000 x 20 machine no.: 761907 Year of construction: 1976 weight: 24500KG General information / technical data: heavy mechanical bending machines from sturdy welding construction in very good condition Working width: 2000 mm Steel ST 50 maximum material thickness: 20 mm Opening the top clamping (clamping cheek): 475 mm Adjustment of the beam: 200 mm motorized height adjustment Bending angle: 130° via electrical rotation angle input can be set Upper cheek speed: 6 mm / sec Bending beam speed: 1.25 RPM (approx. 90 sec for 90 ° bend) Backgauge: from 50 to 999 mm electrically adjustable, with digital display of length dimensions machine: (h x w x d) 3600 x 4350 x 4400 mm (without pit / with bending beam landing) Dimensions cabinet:(h x b x t) 1800 x 1200 x 400 mm Bending actuator power: 30KW Power top clam ...

Manufacturer: Noise Model: RS4/1000 machines no.: 5123/706 Year of construction: 4/1989 weight: approx.: 540 KG General information / technical data: used mechanical vertical Innenräummaschineim of very good immediate quiet machine running Zugkraftbei 3m / min: 4000 KG Räummgeschwindigkeit: 3m / min and 5m / min Return speed: 10 m / min maximum stroke: 1000mm maximum tool length: 1200 mm Table area: 450 mm x 250 mm Table breakthrough 90 mm Workpiece diameter: any Dimensions: h x w x d 1610 x 630 x 855 mm Engine power: 2.2 / 4,7KW Stromversorgung380 Volt 50 HZ Optional accessories: -Kühlmittel / thread cutting fluid pump electric power meter -electrical scanning of the clamping JAWS (tool collection control to prevent against accidentally driving back the drawbridge) Comment: The double spindle drive ensures a quiet and central point of the train, as well as a  ...

Weber, Masch. No. 1109226, orbital riveting machine with RT-stand Motor M 631 / 4 0.18 kW 1360 RPM KMT - APK T-3-S-60-Z SN 307 89 01 Riveting time - adjustable 0.15-3 s Control - Siemens Simatic S 7-200 External dimensions 30 x 20 x 86 cm - riveting machine Panel 50 x 40 x 30 cm More info and details. Photos upon request I am retailer offers to similar machines interested in financing through leasing or hire-purchase request send data protection

Technical data: - max. workpiece dimensions 300 x 250 mm- min./max. Distance from the saw belt to the conveyor belt 4 - 125 mm- wide conveyor belt 285 x 5470 mm wheel diameter 711 x 51 mm- min. workpiece length 200 mm- feed speed infinitely 0 - 25 m/min. (standard:15 m/min., optional: - Sawband dimension 4267 x 51 mm- drive motor 15.0 kW- Hydraulic motor 2.2 kW- motor Height adjustment 1.5 KW- voltage 400 V / 50 Hz- Suction nozzle 4 x 100 mm- cooling device- pneumatic Discontinuation roller in the inlet with shock absorber pneumatic pressure roller for precise sawing - the combination of thin saw band and precise sawband guide enables the production of extremely thin lamella thicknesses at min. slat thicknesses of 1.0 - 2.0 mm- smooth, glueable saw cut- saw band cutting joint from 1.2 - 1.6 mm (50% material saving) - Schmitt accuracy +/- 0.5 mm- PLC control with user-friendly touchscreen ...

akuum-ham press Technical data: completely made of stainless steel Mobile stainless steel frame 1 container for approx. 40-50 kg inclusive Total ext: H130 x w75 x T130 cm incl. Busch vacuum pump: 40 m³/h See pictures original Super condition!

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Universal Cylindrical Grinding Machine MSO FFM-U 130/1000 manufacturer: MSO type: FFM-U 130/1000 mach.-Nr.: 16219Mv12438 year of construction: ? comm.-Nr.: 3990505/009 stock-nr.: 1841 + Regular Price: 4.750,- € > Reduced Price: 2.375,- € BN + All prices are shown without taxes (net price) The machine can be used for: outer grinding surface grinding cone grinding Technical Data (According to manufacturer) centre height: 130 mm swing-Ø: 260 mm grinding length: 1000 mm between centres: 1050 mm grinding wheel diameter: 300 mm bore-Ø: 127 mm largest width of grinding wheel for plunge grinding: 40 mm largest total width of a grinding wh ...

10,000 pieces of grating gratings for pallet shelves galvanized Insertion grids available in different sizes, mesh widths, support rod and weight load: Negotiation price: from € 5,-- net per piece from stock Price with € 5,-- refers to the insert ingerate with the size 24.5 x 104.5 cm Larger quantities on request! Insertion grid Mesh width 80 x 89 cm 2.5 x 2.5 cm 99.5 x 49.5 cm 3 x 3 cm 99.5 x 99.5 cm 3.5 x 3.5 cm 100.5 x 98.5 cm 4.5 x 1.1 cm 104.5 x 24.5 cm 6.5 x 3 cm 108.5 x 111 cm 6.5 x 6.5 cm 120 x 89.5 cm 7 x 3.5 cm 120 x 109 cm 7 x 4.5 cm 125.5 x 59 cm 7 x 7 cm 128.5 x 81 cm 129 x 118 cm support rod 132.5 x 111 cm 20 mm x 2 mm 134 x 76.5 cm 25 mm x 2 mm 134 x 92 cm 30 mm x 2 mm 134.5 x 99.5 cm 35 mm x 2 mm 134.5 x 122 cm 40 mm x 2 mm 143.5 x 124 cm 45 mm x 2 mm 157.5 x 81 cm 170 x 150 cm 179 x 121 cm Used goods, very good condition, see  ...

Electrically heated furnaces with conveyor belt (for non-explosive substances) TECHNICAL DATA temperature max.: 420°C working temperature: approx. 350°C total power consumption: 60 kVA heating power: 48 kW drive: 0,55 kW air circulators: 2 x 4 kW number of control groups: 2 external dimensions (approx.): length: 8500 mm width: 1800 mm height: 2625 mm useable dimensions: conveyor belt width: 900 mm clear height: 150 mm heated length: approx. 7200 mm

Technical data: hydraulic undertable circular saw unit - drive power motor 7.5 kW- diameter saw blade Z=48x5 600 mm- diameter saw blade bore 30 mm- inclined working table Yes- Automatic rotation of the table -70C 0C+70C- Speed of rotation from / to 0C / 70 C 3s- Positioning accuracy +/- 0.2C- Pneumatic workpiece holder 2 pieces- Pneumatic side organizers 2 pieces- Safety cover via capping unit Yes- Cutting capacity at 0C: 160 x 310 mm, 80 x 390 mm- cutting capacity at 45C: 160 x 220 mm, 80 x 270 mm cutting capacity at 70C: 160 x 90 mm, 80 x 130 mm- minimum workpiece thickness 10 mm connection values - supply voltage 400 V / 50 Hz- Control voltage 24 V compressed air requirement at 8 bar per cycle approx. 8 Nl- Suction nozzle FI100 mm 2 pieces- Suction nozzle FI160 mm 1 piece- air speed Suction in center of nozzle approx. 25-35 m/s Electronically controlled slider:- Loading length: 6000 m ...

UniMaster STS, the space-saving solution with a standing container! Standard with all fittings, such as an electromagnetic valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, check valve, condensation tap and shut-off valve V-cylinder driven 2-cylinder unit with two-stage compression for 10 bar pressure increases performance and ensures a high efficiency. Intermediate and aftercoolers ensure a rapid cooling of the generated compressed air Large fan flywheel for optimal cooling With refrigeration dryer and bypass line With complete module Öwadry, consisting of: refrigeration dryer, pre-filter and oil-water separator (only for DKS version) Safety tub optionally available Technical data: - Pressure 10 bar - intake capacity 660 l/min - eff. Delivery quantity 520 l/min - drive power 4.0 kW - speed 1025 rpm. - Container vol ...

Kjellberg Plasma Quick-change head Percut 370 M 1 , 160 amps data see PDF; ready to use

Properties The manufacturer's scarce discharger Drive: Pneumatic Condition: fully functional with traces of use Colour: black Material: Steel Expertly disassembled and packed Price per piece Total quantity in stock: 6 PCs. Technical data Total width: 530 mm Height: 580mm Boom length: 590mm The Assembly traverse length: 430 mm Hub depth: 400 mm Wide pusher: 400 mm Tailor-made solutions We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to.

Properties < b >: < / b > Used belt conveyor Color: grey SEW geared motor available Feet to be ordered separately Material: Steel Ideal for the fast material handling Expertly disassembled and packed Condition: fully operational Technical data < b >: Mass of the belt conveyor < /b > Overall length: 1,040 mm Overall width: 700 mm the belt < /b > details < b > Belt width: 600 mm Belt type: smooth the framework < /b > details < b > Frame height: 160mm the motor < /b > details < b > SEW-EURODRIVE Type: R27 DT90S4/BMG/HR kW: 11 Belt conveyor < b > < /b > The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. During transport, the belt conveyor can promote sensitive and different-sized containers, boxes or other packaging and a ...

Technical data: - max. workpiece height 245 mm - min. workpiece height 50 mm - max. workpiece width 250 mm - min. workpiece width 50 mm - working height 900 mm sawing unit - motor 7.5 kW - speed 2900 rpm. - Cutting height 145 mm (170),(245) - Suction nozzle - saw blade FI 400 mm (450),(600),(750) Horizontal/vertical milling unit - 2 vertical spindles 2 x 7.5 kW - 2 horizontal spindles 2 x 7,5 kW - spindle FI 40 mm - speed of spindles 2850 rpm - max. tool FI 180, 230, 270 (330) mm - swivel-on protective arm - suction nozzle FI 200 mm drilling unit - motor 1.8 kW - Speed 1450 rpm. - Drill FI 12 - 35 mm - Drill length 220 - 320 mm - suction nozzle FI 150 mm forehead groove milling unit - motor 4.0 kW - spindle speed 2900 rpm - max. tool FI 230 mm - spindle FI 30 mm - suction nozzle FI 150 mm Inclusive - pneumatic tensioner - roller table and right - 1700 kg weight

Technical data: 6 kW Type: 233 407 00

Technical data: with driven rollers Roll width: 1,200 mm Wide lifting table 1,400 mm Length lifting table: 3,350 mm Height retracted: 900mm Max lifting weight: 5 to Lifting height: 1,000 mm Platform size (length x width) With built-up roller movement: Roll length: Roll diameter: 164mm Roll spacing: 640mm

480 m2 steel construction stage used, good condition, see pictures Length approx. 21 m Width approx. 23 m Height lower edge 2.45 m Height top edge 2.9 m fastened with screws and nut Grid distances adjustable in length without shelf shelves Negotiation price: € 14,000.00 net from stock Disassembled and loaded from stock Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 3000 lfm pallet racks in stock by numerous manufacturers Changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock Purchase / Sale We are looking for, or offer numerous items from various areas on an ongoing broom-pure company clearances Operational resolutions Fast- flexibl ...

with rotary tower for sieve-edge presses (except EBP350) For cleaning and grinding fruit. The pre-washing system is an absolute must for the hygienic processing of fruit. Thanks to the built-in ratz mill with interchangeable sieves, you get the ideal mash consistency for the respective pressing method. Technical data: Rated power up to 6 000 kg/h Power: Elevator 2.2 (3.0) kW (PS) Mill 5.5 (7.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 750 mm Width 870 mm Height 2 700 mm Delivery or insertion height 800 mm Weight 420 / 450 kg Material 1.4301 / AISI 304 Connections: Connection for cleaning 1/2" inside Connection for washing container 2" outside Height mash ejection 1 730 mm / with transition 1 510 mm can be used for core fruit Scope of delivery 7, 9 and 12 mm cutting sieve

Euro-Pool Grid Box 800 x 1200 mm New goods, see pictures. External dimensions 1,240 x 835 x 970 mm Internal dimensions 1,200 x 800 x 800 mm Capacity 1500 kg Weight 70 kg Weight 70 kg Load 6,000 kg Colour grey Stack height nested 20 Stack height unnested 5 according to UIC standard 435/3 The front side is foldable. One half is open from above the other half is open from below (see pictures). Price: € 109.00 net per piece from stock Larger quantities on request Goods are in stock. Transport possible on request. Visit possible at any time by appointment. More information on request. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or offer numerous items from various areas on an ongoing broom-pure co ...

Oel-Diffusion pump Manufacturer: Leybold Type: DIP 50,000 Status: used Technical data Product: DIP 50000 Catalogue: 22240 Connection flange Suction side: DN 1000 ISO-F Connection flange Print side: DN 160 ISO-K Suction Below 1.0 x 10-4 mbar / 7.5 x 10-5 Torr: 50000 l/s working range: 1.0 x 10-2 - 5.0 x 10-7 mbar 7.5 x 10-3 - 3.8 x 10-7 Torr Final pressure: < 5.0 x 10-7 mbar < 3.8 x 10-7 Torr Max. pre-vacuum pressure: 6.0 x 10-2 mbar 4.5 x 10-2 Torr Equipment: Pump is delivered without equipment quantity of equipment min.: 12.0 l 12.7 qt max.: 25.0 l 26.4 qt grid connection: 3-ph Y, 400 V, 50/60 Hz Heating capacity: 24 kW Number of heating cartridges: 24 Heating time: < 30 min Number of cooling water circuits: 3 Cooling water minimum pump: 1500 l/h 6.6 gal/min Duesenhut steam barrier: 150 l/h 0.66 gal/min Max. Cooling water pressure: 6 bar 87 psi Cooling water connection pump: 1/ ...

Technical data: - Pressure vessel 12 litre- operating pressure max. 5 bar- glue container with pressure gauge glue gun with pointed nozzle - glue hose 4 m- glue indication valve with pointed nozzle water tank for glue gun with holder

Technical data: - Foam rubber roller width 180 mm- glue roller for gluing surfaces- with stand - absper lever for stopping the glue flow

Granulator/granulator directly from stock available! Can be used in the cable processing and cable recycling, Kunstoffzerkleinerung and destruction of plastic and plastic parts Granulator/Schneidmühle type: RMH 16/22 VGA _ 4 KW drive power (further data see table) other granulator/granulator on request) RMH 16/22 VGA/power: 4 KW RMH granulator features: -In the RMH granulator RMH, a knife set is installed. -A sieve is fitted (drill holes on request.). -The following filter inserts are available standard production: 1.5 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm -V cutting geometry â Lenze electric motor / Schneider Electric box and breaker -Slight tilt of the filler funnel -Available with wheels/2 x fixed castors/2 x brake castors or adjustable rubber-mounted feet -With various trays available 1) Insert as box, here the material out of the box out can be tilted (2) slide ...

Technical data: - working width 300 mm- glue roller diameter 140 mm- rubber hardness glue roller 70 shor speed 20 m/min.- Power 0.25 kW- voltage 400 V, 50 Hz- quick change device of the glue roller glue container and rolls made of stainless steel- CE Conformity dimensions: 800 x 600 x 500 mm- Weight: 60 kg

Technical data: - Foam rubber roller width 72 mm- glue roller for gluing surfaces- with stand - absper lever for stopping the glue flow

1 x Farrel Banbury internal Mixer, Model 00C.  Machine number: 91M7017, Year: 1992, Stainless steel jacketed swing side (drop door design). Maximum steam or water pressure 150psi, chrome plated two wing cored rotors with spherical roller bearings, gross capacity of mixing chamber 4.24 liters. 5" Diameter ram cylinder, maximum pressure 100psi. Chrome plated single slope V-bottom, stainless steel, pneumatically operated front door, F.Y.A. dust stops, oil seals, thermocouple. With 65kw (87hp), 340/440 volt, 1500 rpm motor, reducer ratio 15:1. Unit mounted in an enclosed cabinet with a pull-out discharge drawer. In very good condition. Machine to be supplied checked over (overhauled) and fitted with new electrical controls including Siemens S7-1200 PLC and touch screen PC for auto/manual mixing and recipe/data saving.

Technical data: - working width 300 mm- 2 x glue roller diameter 140 mm- rubber hardness glue roller 70 shor speed 20 m/min.- Power 2 x 0.25 kW- voltage 400 V, 50 Hz- quick change device of the glue roller glue container and rollers made of stainless steel- mechanical height adjustment of the upper glue application roller- mechanic digital display of the passage height- CE conformity

Technical data: - pressure vessel 8 litre- operating pressure max. 5 bar- glue container with pressure gauge glue gun with pointed nozzle - glue hose 4 m- glue indication valve with pointed nozzle- water tank for glue gun with holder

Technical data:- Funnel opening 1030 x 1235 mm- Funnel volume 1.5 m3- Power depending on material and screen size- Motor 30 KW- rotor diameter 360 mm- rotor length 1030 mm- Rotor speed 70 - 90 rpm 50 checker knife 30 x 30 mm - PLC control cabinet (completely wired) incl. 5 m cable-siebloung 8 - 40 mm after optional suction nozzle diameter 200 mm- slider with pressure beam- vibration-absorbing machine feet- Automatic star triangle start-up- automatic Off when idle- clock control to avoid unnecessary idle time- CE-Conform dimensions LxWxH 2455 x 1970 x 1730 mm- Weight 2600 kg

We offer you used warehouse stage. Technical data of offered stock stage: It is possible to run a stock stage in the following composition: 7 x 7m Large quantity available! Height the camp stage 4, 75 m -Load capacity 500kg / sqm -Base plate which is made of non-slip plate, thickness of the base plate 40 mm Please contact us in connection. Price for 1 m² - â?¬89 NET / sqm plus Assembly min. order 100 m². For smaller requests, we reserve the right to charge the price otherwise. Prices are net, plus statutory VAT. On request, we can organise transport. After entering your postcode we will charge you the delivery charge We offer a professional fitting. Mistakes and intermediate sale is reserved! Offer valid until stock lasts. Before you click buy, you record please contact with us, to confirm the availability of t ...

Technical data:- Cutting length horizontally 4000 mm - cutting height vertical 2000 mm - cutting depth 30 mm - saw blade diameter 250 x 30 mm - speed main saw blade 5800 rpm speed cracksaw blade 7800 ppm motor 3.0 kW / 400 V - suction nozzle 100 mm - twist-free, free-standing machine frame - Installation dimensions L=5000,W=1150, H=2980 mm - weight 665 kginclusive:- V-slot device for composite panels - Digital display for horizontal cuts- Digital display for vertical cuts- automatically evasive slat slat - transport rollers- continuous small part support - strip stop

We offer metal trays, which are used as subjects in heavy duty and pallet racks. technical data: Width: 890mm Depth: 1120mm Number of sticks: 3 units Capacity: At box 500kg, when setting up a pallet of 1000 kg Weight: 6, 8kg / PCs. Net price: â?¬13 per piece Product available now We have also other Rack Accessories, as well as other racks on sale. Do you need something? Like to take contact with us. On request, we can organise transport. After entering the zip code, we will charge you the delivery cost. To the purchase price, transport costs must be considered. Offer is valid until stocks last. Before you click buy, you record please contact with us, to confirm the availability of the product.

Application: Picture frames, window construction, prefabricated houses, glass strips, hollow-throat strips, interior fittings, skirting boards, door construction, decorative strips, decorative profiles, etc. For Brads (compression head pins) of type "J" from 16 - 50 mm Technical data: - release protection - side loader magazine - setback-free - silencer - weight: 1.25 kg - working pressure: approx. 4-7 bar - air consumption: approx. 0.7 l / nailing Delivery in a plastic case

We offer metal trays, which are used as subjects in heavy duty and pallet racks. technical data: Width: 890mm Depth: 1120mm Number of sticks: 3 units Capacity: At box 500kg, when setting up a pallet of 1000 kg Weight: 6, 8kg / PCs. Net price â?¬13.00 per piece Product available now We have also other Rack Accessories, as well as other racks on sale. Do you need something? Like to take contact with us. On request, we can organise transport. After entering the zip code, we will charge you the delivery cost. To the purchase price, transport costs must be considered. Offer is valid until stocks last. Before you click buy, you record please contact with us, to confirm the availability of the product.

Busch two-stage pump level: Data Pump status: Type: BNV 1000 A Vacuum: 0.005 mbar (abs.) data Pre-pump: Type: NC0400B Suction volume: 400m3/h End pressure: 0.05mbar (abs.) Data Booster: Type: WV1000B Suction power: 1000m3/h End pressure: 0.005mbar (abs.) Condition: tested, maintained (good condition) Including: vacuum pre-filter, oil filling Performance: 3 months; ready for use