tandberg data used for sale

Tank Environmental Protection Wozniack . Specialist establishment according to the Water Budget Act (WHG) offers as follows . Storage tank / extinguishing water tank 50.000 liters used. The container is used and cleaned from the inside. Length: approx. 10,700 mm Diameter: approx. 2,500 mm Weight: approx. 8,000 kg The container can be fitted with the appropriate fittings for extinguishing water can be equipped according to DIN . Of course, you can also use your tank system. All our tank systems are used in our company by selected employees extensively checked and checked. An inexpensive delivery can be offered with . In addition, we purchase existing tank systems and can professionally as an approved specialist company , clean and transpot. We would be happy to make you an offer . We are happy to offer you diesel pumps and diesel pumps with data coll ...

Accessories: -Three-jaw Chuck -Steel holder multi fix A -Lamp -Coolant Technical data: Tip height 120 mm Top width 450 mm Spindle passage 23 mm Spindle inner taper MK 4 Plan travel 150 mm Tailstock MK 2 Quill way 80 mm Manual 9 levels Speed range 2 travel of bolt turn 30 3000 rpm

Coloricon: MOELLER Types: MT-SK II and OFN 2/850 DZSH Price on request Contact data can be found under Contact

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 16,000 liters double-walled used, with a used diesel pump DK 70 EZ: The pump is 1 year young and was overhauled by the manufacturer general. The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 diesel pump DK 70 EZ Container dimensions Length 8,290 mm Diameter 1,600 mm Weight approx. 3,000 kg Of course, you can also use your tank system. We are happy to offer you diesel pumps with a hig ...

Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 5,000 litre double-walled storage tank for the storage of diesel, with a new diesel pump incl data acquisition. Rated capacity 5 cbm Piece 1 used but overhauled, i.e. the container is cleaned, reworked, primed and painted Colour equipment lacquer RAL ; However, you can also use your own colour wishes. Material steel in steel, material S235JRG2 Documents Manufacturer's/Test Certificate in accordance with DIN 6616 D/2 and Nameplate Piece 1 bearing rod Piece 1 Vent nozzle Piece 1 filling nozzle Piece 1 new limit sensor Piece 1 new leak detector with refilled leaking liquid Piece 1 ladder Piece 1 suction line Form of cylindrical storage container wi ...

Cheap LAGERCONTAINER 10 feet (3m) ideal as a material/storage container from location DE-83395 Freilassing Delivery at extra cost ! DESCRIPTION / SPECIFICATION Factory-new storage containers in robust and stable design. Welded steel frame made of wood and rolled profiles with corner fittings, stackable. The floor construction consists of steel beams with welded cross beams and a covering made of 28 mm thick, water-resistant glued plywood. The walls were made of a profile plate with a thickness of 1.5 mm and are welded to the frame construction. The roof skin consists of a 2.0 mm thick profile plate. Container doors are equipped with a double lip seal and rotary rod closures. Each container has anti-theft protection and forklift bags. TECHNICAL DATA / TECHNICAL DATA Dimensions outside: length x width x height: approx. 2,991 x 2,438 x 2,591mm Dimensions inside: length x wid ...

Technical data: 2 axle, block design with integrated cab, Incl. working crane HIAB 125, type 1252 Weight: 10.040 kg maximum permissible load: 960 kg maximum permissible total weight: 11,000 kg Support load: 1,800 kg Type speed: 40 km/h Machine dimensions length x width x height: 5800 x 2500 x 3700 mm

Fuel oil tank tank system diesel tank and other hazardous substances. 50,000 litres capacity according to DIN 6616/D, above ground, double-walled including an officially recognised test certificate. Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank 50,000 liters double-walled used . The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Length 10.7000 mm Diameter 2500 mm Weight approx. 9,000 kg Of course, you can also use  ...

-Röhm three jaw Chuck ø 160 mm -Steel holder multi fix A -div. collets -Fixed bezel -Revolving bezel -Chuck -Nivelierelemente Technical data: Tip height 140 mm Top width 500 mm Spindle bore 38 mm Spindle speeds 15-3550 RPM. Machine weight approx. 750 kg

Diesel tank gas station tank plant. 30,000 litres capacity according to DIN 6616/D, above ground, double-walled including an officially recognised test certificate. Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank 30,000 liters double-walled used . The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder HDMeco 80 Diesel pump with tank data acquisition for 100 users Flow capacity max. 77 l/min PC software Windows, also Windows 7, USB interface incl ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 25,000 liters double-walled used, with a new diesel pump Vision 80 The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 Diesel pump Vision 80 (new) . Flow rate approx. 70 LTR/min . Hose length 4mtr can be extended. Automatic pumpgun new . Container dimensions Length 8,390 mm Diameter 2,000 mm Weight approx. 4,500 kg Of course, you can also use your tank system. We are happy to offer yo ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 7,000 litres double-walled used, with a new diesel pump Vision 80 The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 Diesel pump Vision 80 (new) . Flow rate approx. 70 LTR/min . Hose length 4mtr can be extended. Automatic Zapfpisole is new . Container dimensions Length 3,710 mm Diameter 1,600 mm Weight approx. 1,450 kg Of course, you can also use your tank system. We are happy to offe ...

Description The machine was Teilrevidiert Technical data: Usable area of table 1100 x 255 mm Table movement: Longitudinal/vertical/horizontal 700 / 430 / 250 mm Spindle speeds 38 1500 rpm. Recording ISO 40 Dimensions L/W/H 2260 / 1720 / 1650 mm machine weight approx. 1650 kg

Technical data: X away the 800 mm Y away 300 mm Z away 400 mm Speed 40-2000 RPM. Recording ISO 40 Feed 10 500 mm / min. Spindle motor 2,2 KW

Anthracite grade AO size of pieces - 25-50 mm, sulfur 1% max, ash - 8% max, 6% max volatile - 3.5-4 Сalorific value - 6500-7000 kkal in Lots a 2000 MT other quantities can also be delivered. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire transport process is carried out at the buyer's own expense and at the buyer's own expense. We cann ...

Description -Pivoting milling head -Coolant system Technical data: Table 250 x 500 mm Travel ca X/Y/Z 330 / 400 / 475 mm Speed 63-2800 RPM. Quill stroke 60 mm Dimensions of 1100 x 1400 x 1600 mm machine Recording ISO 30 continuous feed Machine weight approx. 950 kg

Description Accessories available Technical data: Procedures Route x 500 mm Y way 500 mm Z way 380 mm Table size 350 x 800 mm Speed 50-2240 Rev/min Machine dimensions approx. 1.8 x 1.8 x 1.7 m Weight approx. 1650 kg

Anthracite grade AO size of pieces - 25-50 mm, sulfur 1% max, ash - 8% max, 6% max volatile - 3.5-4 Сalorific value - 6500-7000 kkal in Lots a 2000 MT Smaller and larger quantities can also be delivered. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire transport process is carried out at the buyer's own expense and at the buyer's own expe ...

Approx. 30 lfm shelf shepherd, type R 3000 Over 300 meters present as good as new, 50 cm depth present Negotiation price: € 2,330.00 net Offer consists of: Approx. 30 lfm shelf, 2.3 m high, 50 cm deep, 100 kg load/compartment. Field width approx.100 cm 31 pcs stand or frame, 2.3 m , galvanized 150 pcs. shelves, 100kg load/compartment, galvanized 7 St. Cross Associations for Stiffening. 5 levels per field (several are of course possible at an extra cost) Other compilations possible. Heights 2.3m, 2.5m or 3m available. Shipping/transport costs on request Visit possible at any time by appointment. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or offer numerous items from various areas on an ong ...

Description Steel holder Multifix type: B Plexiglass Chuck guard Three-jaw Chuck ø 200 mm Live Technical data: Tip height 160 mm Top width 800 mm Spindle bore 36 mm Speeds 24-2800 RPM Recording bayonet 5 (DIN 55022)

WEBER SCALE DATAPOND 85-AB Capacity 200 t / h complete pre and post container immediately available Mob. + 491715213204

Ladies and gentlemen, Below you will submit a non-binding offer for a used 3.7 tonne arc furnace: Offer Arc Furnace we will send you our offer with technical data on a used standard system arc furnace 3.7 t All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of  ...

Description Steel holder Multifix type: B Plexiglass Chuck guard Four-jaw Chuck Face plate ø 300 mm Live Fixed bezel Various gears Technical data: Tip height 160 mm Top width 800 mm Spindle bore 36 mm Speeds 24-2800 RPM Recording bayonet 5 (DIN 55022)

Type: diving motor unit Flygt submersible pump Pump: 3085891 Data: 259 mm / M15-09-2AL Y/A: 2,4 kW r/min: 2840 V: 4.7 / 8.1 kg: 55

Ladies and gentlemen, Below you will submit a non-binding offer for a used 50 tons arc furnace: Offer Arc Furnace we will send you our offer with technical data on a used standard system arc furnace 50 t All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the ...

Description The machine was without Accessories: Spannznangen, div. end mill holders. Technical data: x away the 300 mm y away 150 mm z away 340 mm Table 210 x 600 mm Spindle speeds 40-2000 RPM. Feed 10 500 rpm. Recording ISO 40

Technical data: -2.77 l/s, 14.7 m -Rated speed: 1440 1/min -Inlet: DN 50 -Print: DN 40 -Motor: 11 kW -2-pole New price: 16,500

Ladies and gentlemen, Below you will submit a non-binding offer for a used 50 tons arc furnace: Offer Arc Furnace we will send you our offer with technical data on a used standard system arc furnace 50 t All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the ...

Description Feeds in all 3 axes adjustable Digital display, route and position control HEIDENHAIN TNC technical data: Traverse path X / Y / Z 500 / 500 / 400 mm Speed range 30-2240 Rev/min Spindle speeds 24 Feed range 1 750 mm / min Rapid traverse in all feed directions 1500 mm / min Size 450 x 800 mm Weight approx. 1400 kg

The plant is 6 months old and is being abandoned due to conversion of production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. There are 2 containers of wood chips/firewood (35m3) to be connected. NOTE TO PICTURES: Plant can only dry 2 containers and is half as wide as shown on pictures. Construction analogous to drying system for 4 containers! Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit ( ...

The small laboratory press MHSP5 can perform very well with the round stamp (70 mm diameter) deformations of many materials. By delivering fine (0.5 mm per wheel revolution), deformations are carried out very accurately. Small punching or stamping operations are possible. The press is driven by a worm gear screw jacks, which requires minimal hand strength by high reduction ratio. The pressing frame consists of stable-dimensioned polyamide PA6G. Here are some technical data:-static force 5 KN (0.5 to) - portable presses frame made of polyamide PA 6 G, very stable design, with FEM program added - spindle manual jacks 20 mm, pitch 5 mm - with Handwheel diameter 120 mm and handle - gear ratio 1:10, per the Handwheel 0.5 mm screw - table size 235 195 mm - clearance width 190 mm - stamp size diameter 70 mm with 4 holes 8 mm for mounting a major stamp Very easy operation with spindle and w ...

Description Digital display (3 axis) Technical data: 1100 X 300 mm clamping surface Longitudinal stroke 700 mm Transverse stroke 250 mm Vertical lift 470 mm Spindle speeds 45-2000 RPM. Recording ISO 40 12 Milling feed longitudinal and transverse 18 800 mm / min. vertical 7.2 320 mm / min. The milling spindle 7 HP drive motor Drive motor of 1.5 HP table Machine weight 2050 kg

Price per 2700 mm; continuous shelf BITO 5 levels per shelving system Continuous shelf BITO Manufacturer BITO Regaltechnik All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is ...

A fireproof card box approx. 500 kg of own weight. We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and erro ...

Description Digital display (3 axis) Technical data: 1100 X 300 mm clamping surface Longitudinal stroke 700 mm Transverse stroke 250 mm Vertical lift 470 mm Spindle speeds 45-2000 RPM. Recording ISO 40 12 Milling feed longitudinal and transverse 18 800 mm / min. vertical 7.2 320 mm / min. The milling spindle 7 HP drive motor Drive motor of 1.5 HP table Machine weight 2050 kg

Technical data: Fruit wash, grind, pressing then the juice pasteurization and bag-in-box packaging pour performance up to 750 L/h incl. mounted hydraulic large box emptying wash grinding plant Kreuzmayr KWEM 1000 cover press Kreuzmayr KEB 500 Pasteur Kreuzmayr PA 750 oil bag-in-box fillers Kreuzmayr CBF 900, incl. 6-digit series bottling juice pump, strainer, 2 PCs. juice buffer tank 220 litre stainless steel base frame, Tandem chassis with tyres 195/50-10 plan building with gas spring lift for the two side walls, roll-over tarp back 4 PCs. crank rotating supports for the horizontal alignment of the System cleaner, air compressor and complete piping fix established

Heavy cable separation machine DeltaX 4010 technical data diameter cable: 18 up to 180 mm cutting speed: 32 m minute power: electric motor 11 kw / 380V dimensions (Lxwxh): 1880 x 1400 x 1560 weight: 1750 kg blade adjustment: hydraulic

Wood chip dryer, firewood dryer for 4 containers The plant is abandoned due to conversion of the production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit (radial fan with motor 11kW) Heater 480kW Funnel for air flow incl. 4 shut-off valves and & 4 pieces connections Power con ...

Plant: frequency inverter inverter needed Manufacturer: VEE Voith-Elin electronics Type: Elovert SD 400/15C18.5P 8852520.00 Input: Data L: 400 V + 10-15% q: 50/60 Hz +/-5% I: 27A/35A Output: Data L: 0.. 380 (415) V q: 0.. 300 Hz I: 30A nominal / 38 A continuous Protection IP: 20 Serial No.: 255999 Condition: well maintained

Lauber Energy Use Centre for 4 containers. The plant is abandoned due to conversion of the production. We replace our steam engine with a turbine, which is why most of the waste heat is eliminated. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) The system consists of: Intake hopper for air incl. dust filter Blower unit Heater 370kW Funnel for air flow incl. 4 shut ...

Compact bag machine Technical data: Nominal width: 420 mm Working width: 400 mm Flow speed: 7 m / min, depending on the film Bag length: 15 mm to 4000 mm Foil thickness: 2 x 10 in the 2 x 100 in the Slide material: LDPE, HDPE (others determine by tests) Film type: flat film (others determine by tests) Max film roll: Ø 400 mm Schweißschine Oberschine pulse heated against attempts on the bottom blade Welding seam width shrink seam Air consumption: no compressed air required Dimensions (WxHxD): approx. 800x480x600mm (without base plate) Supply voltage: 230 Volt, 50/60 Hz Protection: 16 A, slow-blow The advantages at a glance: Outstanding price / performance ratio quick and easy to use no compressed air required precise stepper touch screen to set up all parameters (feed, stroke, welding and cooling time, quantity) switched it can compact, small design of easier film roles c ...

Frequency inverter inverter Plant: frequency inverter inverter needed Manufacturer: VEE Voith-Elin electronics Type: Elovert SD 400/18 5C22P 8853540.00 Input: Data L: 400 V + 10-15% q: 50/60 Hz +/-5% I: 36A/46A Output: Data L: 0.. 380 (415) V q: 0... 200 Hz I: nominal 40A / 50A continuous Protection IP: 20 Serial No.: 256559 Condition: well maintained

Motor data -1/1.9 HP -710/1420 RPM -380 Volt -3.7/3.8 amps

Run-through ragal approx. 500 pitches Price on request All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer' ...

Traypacker power food Capacity: 14,400 cups/h à 125 g / cups, used in very good condition Technical data: production capacity: 40 cartons / min 6 Cup/tray = 240 cups per minute = 14,400 Cup 125 g / Cup year: 2008 Dimensions: Ready-cut pieces Lxwxh: 698,5 x 168,0 x 1.5 mm Cover LxDxH: 95.5 x 95.5 x 9.0 mm Cup DxH: 92.5 x 42.0 mm machine dimensions: Lxwxh: 7500 x 7400 x 3000 mm Weight: approx. 6,800 kg Original price: 950,000

Ladies and gentlemen, we can offer you pre-produced components for roads on request in order to build short-term system roads. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices; The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty; We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling, loading and transport is carri ...

New machine editing by: wood, plastic, PVC, Fiberglass, Plexiglas, non-ferrous metals such as aluminum, brass, etc. Technical data: Auflöstung: 0,0018 mm X-Y-Z of precision trapezoidal thread spindles 12 x 3 mm All drive spindles are without triple play ball bearings Table size: 506 mm x 320 mm Traverse paths: x 215 mm, y 375 mm, z approx. 90 mm Passage about 78 mm Prices and further sizes on request

More information against request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error are expressly reserved. Price quotes are available on request. Yours sincerely Trade & Tra ...

Description Accessories available. Technical data: Tip height 185 mm Turning diameter in the offset 450 mm Turning diameter over bed 395 mm Turning diameter over slide 220 mm Length 310 mm of offset Top width 1000 mm 20 spindle speeds or optional 22-1500 rpm. Turning length 1000 mm

Technical data: Diameter over bed: 1550 mm Diameter over slide: 1600 mm Turning length: 5500 mm Max cross travel: 400 mm