british flag
Resale Logo

tal used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used engines and spare parts  Motoren Steffens GmbH  http://www.motoren-steffens.de 
banner logo
start page > keywords tal > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125489668 101

MATEC Matec 30 SH for sale
Processing Centers


REF.-No. 00495 Description of the system used CNC machining center manufacturer Matec Model Matec 30 SH Year of manufacture 2003 control Bosch type 3 osa workspace X 500 mm Y 400 mm Z 400 mm machine table 1000 x 6 ...
used machine
 
REF.-No. 00495

Description of the system used CNC machining center manufacturer Matec
Model Matec 30 SH
Year of manufacture 2003 control Bosch type 3 osa workspace X 500 mm
Y 400 mm
Z 400 mm machine table 1000 x 600 mm T grooves 6 x 14 H 10 (grid panel) power drilling capacity in St 60 40 mm
Threading in St. 60 24 M
Milling capacity in ST 60 400 cm3/min

Main spindle drive power 40% ED 15-16 kW
Speed range 20-15,000 torque max. 127 NM
2003
Price  
    request
125499263 109

LUNA MBC8835 for sale
Metal bundling machine Luna MBC8835


The machine is a special four-roller winder, intended for folding sheets AL m. Al. reflector. It has 3 independent lower rollers shortening the time to a minimum roll. The rollers are supported by adjustable, bearings sl ...
used machine
 
The machine is a special four-roller winder, intended for folding sheets AL m. Al. reflector. It has 3 independent lower rollers shortening the time to a minimum roll. The rollers are supported by adjustable, bearings slides for easy compensation of the deflection depending on the thickness and hardness of the material. Compensation of sagging upper roller is realized by longitudinal beam. All rollers are driven. The spinning process is carried out without slip to prevent scratching of the workpiece. CNC - equipped with an interpolation, it is a simultaneous rotation bending rolls, along with their shift. All rolls are chrome-plated and polished. All axes are programmable. The machine has the possibility of rolling difficult elliptical shapes.
2010
27,000 EU?  
  PL   request
125484140 804

PLANETA Supervariant P 44 for sale


-Four colours with 2/2 or 4/0 max size 72x102 cms. -Varidamp dampening with Webitalia refrigeration system -Varicontrol Planeta Console with ink and plate registers ( no cocking ) -16.000 hours of work, installed a ...
used machine
 
-Four colours with 2/2 or 4/0 max size 72x102 cms.
-Varidamp dampening with Webitalia refrigeration system
-Varicontrol Planeta Console with ink and plate registers ( no cocking )
-16.000 hours of work, installed and under production
-No damages, complete with all accessories
1992
29,000 €  
  IT   request
125497110 1010

GENIE S125 Diesel, 4x4x4 Drive, Jib, 40.1m Working Heigh for sale
Telescopic handlers


; Gross weight [kg]: 21006; Rear tyres remaining: 40; Front tyres remaining: 40; Accessories: Manufacturer: Genie, Typ: S125/4WD, Building year: 2008, Fuel: Diesel, Serial number: S12508-2211, Working hours: 1.403 h, Loa ...
used machine
 
; Gross weight [kg]: 21006; Rear tyres remaining: 40; Front tyres remaining: 40; Accessories: Manufacturer: Genie, Typ: S125/4WD, Building year: 2008, Fuel: Diesel, Serial number: S12508-2211, Working hours: 1.403 h, Loading / lifting capacity: 230 kg, Working height: 40.1 m, Horizontal reach: 24.4 m, Boom sections: 4, Drive speed: 4.8 km/H, Numbe; Maximum lift capacity [kg]: 230
2008
67,500 €  
  NL   request
125480025 832

STAHL KD 78/4 KTL-PD-T for sale


- Pallet feeder - Tremat - Digital control - 4 buckles at Station KD 78/4 - Cross fold station with 2 knifes, 1 buckle - VSA 86 D+MKE.D mobil delivery (1998)
used machine
 
- Pallet feeder
- Tremat
- Digital control
- 4 buckles at Station KD 78/4
- Cross fold station with 2 knifes, 1 buckle
- VSA 86 D+MKE.D mobil delivery (1998)
1995
Price  
    request
125497063 1005

HAULOTTE H43TPX Diesel, 4x4x4, 42.2m Working Height, Jib, ( for sale
All terrain cranes


; Gross weight [kg]: 20600; Rear tyres remaining: 70; Front tyres remaining: 70; Accessories: Manufacturer: Haulotte, Typ: H43TPX, Building year: 2013, Fuel: Diesel, Serial number: TD106627, Working hours: 3.949 h, , Wo ...
used machine
 
; Gross weight [kg]: 20600; Rear tyres remaining: 70; Front tyres remaining: 70; Accessories: Manufacturer: Haulotte, Typ: H43TPX, Building year: 2013, Fuel: Diesel, Serial number: TD106627, Working hours: 3.949 h, , Working height: 42, 2 m., Horizontal outreach: 20 m., Lift capacity: 230 kg., Platform size: 2, 44 x 0, 8 m., Drive speed:; Maximum lift capacity [kg]: 450
2013
79,500 €  
  NL   request
125480021 305

MADE IN ITALY mm.300 for sale
SEMI-AUTOMATIC HYDRAULIC SCREENCHANGER


SEMI-AUTOMATIC HYDRAULIC SCREENCHANGER for extruders 130 to 160 mm diam. sliding plate made in special steel alloy hydraulic piston movement 3 heating areas n.2 removable filtering sections diam. 298 mm. sliding ...

 
SEMI-AUTOMATIC HYDRAULIC SCREENCHANGER

for extruders 130 to 160 mm diam.
sliding plate made in special steel alloy
hydraulic piston movement
3 heating areas
n.2 removable filtering sections diam. 298 mm.
sliding between 2 bronze rings
operated by 2 push buttons
termoregulated by control panel
 
15,000   
  IT   request
125494864 102

SCHIESS FRORIEP CNC Model for sale
Turning machines, Vertical


Turning diameter: 10000 mmTurning height: 6500 mmChuck diameter: 8000 mmNumber of chucks: 1  CNC Brand: NUM MAKE  Schiess Froriep TYPE    5K800 - 1000 YEAR   Complete rebuild in 2014 - 2014 SPEC ...

 

Turning diameter: 10000 mm
Turning height: 6500 mm
Chuck diameter: 8000 mm
Number of chucks: 1  
CNC Brand: NUM

MAKE  Schiess Froriep


TYPE    5K800 - 1000


YEAR   Complete rebuild in 2014 - 2014


SPECIFICATIONS


Controll   NUM


Max. turning diamter Ø  10.000 mm


Table / chuck size Ø   8000 mm


Workpiece height   6500 mm


Work piece weight    350.000 Kg


Horizontal movement support / ram   6000 mm


Stroke support left ram   3500 mm


Stroke support right ram   3500 mm


Angle adjustment / ram swivable   - 30 / + 45


Singel column or double column    Double Column


Spindle speeds / ranges   Vario 18 Rpm


Power   125 Kw


DIMENSIONS


Length   11.000 mm


Width    15.000 mm


Height    14.000 mm


 
Price  
    request
125480019 815

DURST RHO 600 for sale


Condition very good

 
Condition very good
 
15,000 €  
    request
125494855 102  

OERLIKON DM 2a for sale
Center Lathe


turning diameter over bed: 625 mmturning diameter over slide rest: 385 mmturning length: 2500 mmturning speeds: 7 - 1070 U/mincentre height: 300 mmspindle bore: 62 mmtotal power requirement: 20 kWweight of the machine ca ...
used machine
 
turning diameter over bed: 625 mm
turning diameter over slide rest: 385 mm
turning length: 2500 mm
turning speeds: 7 - 1070 U/min
centre height: 300 mm
spindle bore: 62 mm
total power requirement: 20 kW
weight of the machine ca.: 5,2 t
Dimensions (LxWxH): 4,7 x 1,4 x 1,6 m
Center lathe with
- 3-jaw chuck F 315
- Fixed tailstock top
- Multifix holder
- 2-axis digital display
- Fixed Lynette 180 mm
- Coolant system
- rapid traverse



This ad was created with MODUL MWS - the software solution of LogoTech.
1980
Price  
    request
125480017 101

SMTCL VMC 1051 for sale
Numerically Controlled Machining Centres


Machining center - vertical SMTCL VMC 1051 bearing no 1105-02409 category machining center - vertical make SMTCL type VMC 1051 year 2007 State second-hand machine control CNC storage France country of origin CHINA delive ...
used machine
 
Machining center - vertical SMTCL VMC 1051 bearing no 1105-02409 category machining center - vertical make SMTCL type VMC 1051 year 2007 State second-hand machine control CNC storage France country of origin CHINA delivery immediately cargo Base EX WORK technical details x way 1020 mm y way 510 mm z trail 650 mm CNC CNC FANUC 0I MC FANUC table size 1120 X 510 mm ISO 40 spindle adaptor bt spindle speeds 8000 1/min spindle drive motor (30 min) kW tool changer 15 for 24 tools
maximum table load of 1000 kg projection 630 mm coolant system chip conveyor operating voltage 380 V rapid traverse speed 30 m / min feed range 20000 mm / min weight 7 tons of space approximately 3.0 x 2.60 x 2,90 m description - control: FANUC OI MC.
-Conveyors - coolant system
MAGAZINE 24 COMPARTMENT DOUBLE ARM
8000 RPM
2007
28,000 €  
    request
125494857 107

STÖLTING 2000/5 for sale
Rolls bending machine - 3 Rolls


sheet width: 2050 mmplate thickness: 5 mmdistance between columns: 2240 mmdiameter of upper rolls: 140 mmdiameter of lower rolls: 130 mmtotal power requirement: 4 KWweight of the machine ca.: 1,5 tdimensions of the machi ...

 
sheet width: 2050 mm
plate thickness: 5 mm
distance between columns: 2240 mm
diameter of upper rolls: 140 mm
diameter of lower rolls: 130 mm
total power requirement: 4 KW
weight of the machine ca.: 1,5 t
dimensions of the machine ca.: 3,0 x 0,8 x 1,6 mm




This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125480015 101

HECKERT CW 1000 for sale
Horizontal Numerically Controlled Machining Centres


Horizontal machining center Heckert Type CW 1000 Built in 1995 Control Siemens 880M X 1350 Bcl2keqt93 Y1450 Z1000 Spindle diameter 110 mm Pallet clamping surface 1000 x 1000 x 1000 The sale is ...
used machine
 
Horizontal machining center Heckert

Type CW 1000

Built in 1995

Control Siemens 880M

X 1350

Bcl2keqt93
Y1450

Z1000

Spindle diameter 110 mm

Pallet clamping surface 1000 x 1000 x 1000

The sale is carried out only to traders in accordance with § 14BGB
1995
Price  
    request
125494859 102

KAPPEL for sale
Center Lathe


turning diameter over bed: 380 mmturning diameter over slide rest: 240 mmturning length: 1000 mmturning diameter in the gap: 520 mmturning speeds: U/mincentre height: 190 mmspindle bore: 52 mmtailstock quill taper MT:  ...

 
turning diameter over bed: 380 mm
turning diameter over slide rest: 240 mm
turning length: 1000 mm
turning diameter in the gap: 520 mm
turning speeds: U/min
centre height: 190 mm
spindle bore: 52 mm
tailstock quill taper MT: MK
tailstock travel: mm
tailstock quill diameter: 80 mm
total power requirement: 2,9 kW
weight of the machine ca.: 12, t
dimensions of the machine ca.: 2,8 x 1,3 x 1,4 m
- 3-jaw chuck with reversible jaws
- Coolant system
- Multifix steel holder with 4 cassettes



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125480011 101

YCM SUPERMAX MV 106 A for sale
Numerically Controlled Machining Centres


Machining center - vertical SUPERMAX YCM MV 106 A bearing no 1105-02408 category machining center - vertical make SUPERMAX YCM type MV 106 A year 2006 condition second-hand machine control CNC storage France country of o ...
used machine
 
Machining center - vertical SUPERMAX YCM MV 106 A bearing no 1105-02408 category machining center - vertical make SUPERMAX YCM type MV 106 A year 2006 condition second-hand machine control CNC storage France country of origin Taiwan delivery time immediately cargo base EX WORK technical specifications x way 1020 mm y-way 600 mm z-way 600 mm FANUC CNC control 20 I FANUC table size 1120 X 650 mm spindle retainer ISO 40 spindle speeds 8000 bt 1/min spindle drive motor (30 min) kW tool changer 18 for 24 tools of Max table load 1200 kg projection 630 mm coolant system chip conveyor operating voltage 380 V rapid traverse speed 12 m / min feed range 1-5000 mm / min weight 7 tons of space approx. 2.90 x 2.60 x 2.50 m description - St FANUC euerung 20 IN the
-Conveyors - coolant system
MAGAZINE 24 COMPARTMENT DOUBLE ARM
8000 RPM
2006
27,500 €  
    request
125494861 102

HEYLIGENSTAEDT 440 Ea/2000 for sale
Center Lathe


turning diameter over bed: 890 mmturning diameter over slide rest: 600 mmturning length: 2300 mmturning speeds: 11,2 - 560 U/mincentre height: 450 mmspindle bore: 98 mmtailstock quill taper MT: 6 MKtotal power requiremen ...
used machine
 
turning diameter over bed: 890 mm
turning diameter over slide rest: 600 mm
turning length: 2300 mm
turning speeds: 11,2 - 560 U/min
centre height: 450 mm
spindle bore: 98 mm
tailstock quill taper MT: 6 MK
total power requirement: kW
weight of the machine ca.: 7,3 t
Dimensions (LxWxH): 4,5 x 1,7 x 1,8 m
Center lathe with
- 3-jaw chuck F 315
- Fixed tailstock top
- Multifix holder
- 2-axis digital display
- Fixed Lynette 180 mm
- Coolant system
- rapid traverse



This ad was created with MODUL MWS - the software solution of LogoTech.
1973
Price  
    request
125480009 110

FISCHER 3000 X 1500 for sale
Measuring Plates


Measuring plate fishing 3000 X 1500 11-99-010 delivery: immediately number: 11-99-010 manufacturer: Fischer type: 3000 x 1500 MACHINE data year: approx. 1994 L x W x H: CA. 3000 x 1500 x 1000 mm weight: approx. 3000 k ...
used machine
 
Measuring plate fishing 3000 X 1500 11-99-010 delivery: immediately number: 11-99-010 manufacturer: Fischer type: 3000 x 1500

MACHINE data year: approx. 1994 L x W x H: CA. 3000 x 1500 x 1000 mm weight: approx. 3000 kg

Very good condition specifications measuring plate length: approx. 3000 mm width: approx. 1500 mm thickness: approx. 350 mm

Accessories â?¢ 4 x tailstock for concentricity measurement â?¢ 2 x bezel for concentricity measurement â?¢ central guide rail for tailstock â?¢ storage feet accessories on request price and other specifications on request
1994
Price  
    request
125494851 102

RAVENSBURG KH 100-M- CNC for sale
Facing and Centering Lathe


turning diameter over bed: 2400 mmturning diameter over slide rest: 2000 mmturning length: 1800 mmpower capacity: 95 kWmax. torque on faceplate: 80000 Nmmain spindle speeds:: 1-200 U/min main spindle bore: 150 mmmax. wor ...
used machine
 
turning diameter over bed: 2400 mm
turning diameter over slide rest: 2000 mm
turning length: 1800 mm
power capacity: 95 kW
max. torque on faceplate: 80000 Nm
main spindle speeds:: 1-200 U/min
main spindle bore: 150 mm
max. workpiece weight at 540 mm: 8000 kg
faceplate diameter: 2400 mm
total power requirement: 125 kW
weight of the machine ca.: 40 t
dimensions of the machine ca.: 10,4x7x4,3 m
Modernized and equipped with Siemens 840 D SL in 2014!

Machine has following options:
- Linear measuring system
- oil cooling unit
- oil-dust-exhaust
- traveling splash guard
- traveling operator platform
- ATC with 40 stations
- tool measuring device
- cooling unit
- chip conveyor



This ad was created with MODUL MWS - the software solution of LogoTech.
1993
Price  
    request
125480007 110

MESSPLATTE 1500 X 3000 for sale
Measuring Plates


Measuring plate of 1500 x 3000 - 11-99-009 delivery time: immediate number: 11-99-009 manufacturer: measuring plate type: 1500 x 3000 MACHINE data year: approx. 1990 L x W x H: CA. 3000 x 1500 x 1000 mm weight: appro ...
used machine
 
Measuring plate of 1500 x 3000 - 11-99-009 delivery time: immediate number: 11-99-009 manufacturer: measuring plate type: 1500 x 3000

MACHINE data year: approx. 1990 L x W x H: CA. 3000 x 1500 x 1000 mm weight: approx. 3000 kg

Good general condition specifications measuring plate length: approx. 3000 mm width: approx. 1500 mm thickness: 300 mm

Accessories â?¢ storage feet accessories on request price and other specifications on request
1990
Price  
    request
125494845 102

GILDEMEISTER CTX 200 S2 for sale
CNC Lathe - Inclined Bed Type


turning diameter: 290 mmturning length: 365 mmcontrol: Heidenhain MANUEL GUIDEgreates pass round over bed: 440 mmx-travel: 160 mmz-travel: 350 mmspindle head: 120 H 5 mmspindle bore: 56 mmbar material dia.: 42 mmspindle  ...
used machine
 
turning diameter: 290 mm
turning length: 365 mm
control: Heidenhain MANUEL GUIDE
greates pass round over bed: 440 mm
x-travel: 160 mm
z-travel: 350 mm
spindle head: 120 H 5 mm
spindle bore: 56 mm
bar material dia.: 42 mm
spindle diameter in front bearing: 90 mm
turning speed range: 20 - 5000 U/min
spindle drive: 9 kW
no. of tools in turret 1: 12 x VDI 30
total power requirement: 22 kW
weight of the machine ca.: 4,2 t
dimensions of the machine ca.: 2,8 x 1,7 x 1,8 m
0114002271

Machine with CE

Heidenhain CNC Pilot 3190
Tool pickup device
Bar loader LNS Super Hydro BAR

C-axis (main spindle)
- speed min / 1 28
- Holding torque Nm 70
- Graduation accuracy degree <0.03

Universal disc turret with driven tools
Number of tool stations 12
   of which max. powered tools 12
   Max. Clamping diameter of the angetr. Tools 13 mm
   Drive line 40% ED kW 5.7

movable tailstock
Chip conveyor
19 hornbin collets with keys
35 x various VDI tools
Hornbuch SPANNTOP
6 x VDI 30 tools driven
Operating instructions, operating instructions, planning documents,
Transport documents and wiring diagram available

Operating hours approx. 23,300 h



This ad was created with MODUL MWS - the software solution of LogoTech.
2001
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More TAL models (2 or more machines):
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

SEMI-AUTOMATIC HYDRAULIC SCREENCHANGER MADE IN ITALY mm.300


SEMI-AUTOMATIC HYDRAULIC SCREENCHANGER for extruders 130 to 160 mm diam. sliding plate made in special steel alloy hydraulic piston movement 3 heating areas n.2 removable filtering sections diam. 298 mm. sliding between 2 bronze rings operated by 2 push buttons termoregulated by control panel

Shinohara 52-4


-Four colours Straight machine max size 37x52 cms. -Year 2008, Only 11 mil. impressions -Semi automatic plate change SPC -Shinohara Alcool continuous dampening with Baldwin cooling unit -Console with CIP 3 software installed, all automatic ink and plate registers PCC -Automatic blankets and rollers washers ABW -In production, any print test possible -Top conditions Included CTP SDP-ECO 1630 III R Platesetter: Computer to plate for plates in polyester and paper ( Silver- Digiplate ) -RIP Mitsubishi SDP-RIP, Intelcore 2 Quad Q 6600, Ram 2 Gb

MACCHINARI ATTREZZATURE


For sale exclusively on next 26/06/2018, 10-30 hours in Bergamo (BS) For more information contact us at 030 – 7751645 between 9-13, 14-18 MACHINERY: -5 Slot machines -lot composed # 4 Jukebox with cd -Electric linkage ARMANNI MASTER LIGHT 105/29, capacity kg 1000 of 2001 -pallet truck 2000 kg pallet truck 2000 kg -lot workshop Equipment: -metal shelf L = 120, 6 2 uprights and shelves -Iron shelving, shelves and uprights 48 16 L = 120 -iron and wood stair with landing, 4 risers, trundle -Blue iron rack, 3 uprights H = 300, 2 uprights H = 250, 26 traverse L = 150 and 2 crossbars L = 120 -aluminium staircase with landing -Blue iron shelving H = 300, 21 2 uprights, crossbars L = 200, 118 traverse L = 120, 14 traverse L = 150....... ETC, etc, etc. -detailed catalogue Available.

CNC Bending Machines Gasparini PBS 135/4000


OVERVIEW: Brand: Gasparini Model: PBS 135/4000 Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 2003 Location: Spain Origin country: Italy GENERAL DATA: Measurements width: 4250 mm Measurements depth: 1700 mm Measurements height: 2750 mm Machine weight: 14000 kg MAIN DRIVE: Pressing force: 1350 kN Bending length: 4000 mm CONTROL UNIT: Brand: Delem Model: DA-65 MEDIA: Main electronic connection: 380 V / 50 Hz Power consumption: 15 kW

Self-Cleaning Disc Separator Alfa-Laval BRPX 617


Clarifier design, centripetal pump liquid discharge. It is used for removing suspended solids with particle sizes from approximately 0.5 to 500 ?m from a liquid having a lower specific gravity than the solids. The solids content in the feed is normally in the range of 0.1-10 % by volume, but can vary between different duties CONTROL Cabinet available

Granulating mills PREVIERO MU-710 P.R.


PREVIERO GRINDER TYPE MU-710 PR complete with conveyor belt and metal detector closed rotor Grinding chamber : mm.1000 x770 Feeding hopper : 1170 mm x 900 mm 160 kW Motor 6 knives on rotor + 2 knives on stator grid with 14 mm drilling Inspection door for knives replacement Output 2000/2400 kg / h depending on material and grid Electric cabinet Offered completetely reconditioned in 2018 Construction year 1989

Circular press FPA PXW 100 AAb


Press obwiedniowa of varying matrix FPA PXW 100 AAb was built by the factory Automatic Presses Warsaw, Poland-Italy. FPA press-specific data PXW 100 AAb: largest diameter: 100 mm -pressure: 160 T -stroke: 140 mm -the amount of fluctuation matrix: 1500 l/min. -engine power: 17 kW -the engine speed: 3000 l/min. -pump motor power: 11 kW -the engine speed pump drive: 1000 l/min. -the power of pump motor battery: 0.8 kW -the engine speed pump battery: 1500 l/min. -weight of the machine: 53000 kg

horizontal boxer press Euromac Digibend 360


EUROMAC punching Digibend 360 capacity 36 tonnes lengh of stroke 250 mm working speed 10/24-6 mm/sec hight bending 200 mm extra high bending 415 mm oil tank capacity 60 lt aprox 3-phases motor 5.5-4 (hp-kw) table 580 x 1170 mm size 680 x 1170 x 1130 mm weight 900 kg year 2000 CE The data are mechanically translated in the english language. Translation errors are possible. No guarantee for printed date and pricing. • Save up to 100 bend in machine memory. • Bend the guaranteed accurate to +/-0.05mm. • Automated for fast, precise production. • Reduce your set up time. • Adjusting the machine bending pressure or working speed. • Monoblock construction. • Maximum flexibility for bending application (up to 10 tooling) Benefits: • With Euromac punching bending machine, you can change over from one type of tooling to another quickly and easily. • Our bending table is machined from one piece tapered roller steel casting that's guaranteed for 5 year. • Our horizontal acting bending machines give you unlimited bending capabilities, without the risk of damaging your expensive press brake tooling. • Euromac punching bending machine are easy to program, easy to operate, and the cost of production is surprisingly low Well in good conditions of use, which ' can be seen connected and running, by appointment. Specification The RAM force-tonnage (KN) 36 (160) Length of stroke 250 mm Table dimension 1200x580mm Overall dimensions (W x D x H) 1250 x 650 x mm-1140 mm Weight 900 kg

Guillotine Shears STROJARNE PIESOK NTC 2000/4


Guillotine STROJARNE PIESOK NTC 2000/4 were produced in 1987. Shears allow cutting of materials with different strength such as steel, aluminium, copper, etc. The materials with a tensile strength of more than 450 MPa cut material thickness must be correspondingly reduced. In the case of less strength than the 450 MPa can cut materials with a greater thickness, which the breakdown does not exceed 8 mm. The thickness of the material to be cut, depending on the strength of: aluminum 200 MPa: 6 mm copper 250 MPa: 5.3 mm nickel 400 MPa: 4.2 mm steel 450 MPa: 4 mm steel 500 MPa: 3.8 mm brass 600 MPa: 3.4 mm steel 700 MPa: 3.2 mm steel 800 MPa: 3 mm Technical parameters of the guillotine NTC 2000/4: -maximum thickness sheet with pt = 450 MPa: 4 mm -maximum cutting length: 2050 mm -cutting angle: 1.33 degree -outreach in the stands: 200 mm -number of jumps continuous operation at idling speed: 60 RPM -the minimum thickness of the metal: 0.4 mm -the minimum width of the webs: 10s mm (s-thickness) -the maximum radius of curvature of the knife: 0, 05s mm (s-thickness) -cut on the rear bumper, the maximum width without brackets: 300s mm (s-thickness) -position the rear bumper: 4-750 mm -installed power: 5 kVA -the power of main motor: 4 kW -engine power bumper: 0.25 kW -overall dimensions of the device (l x w x h): 2600 x 1600 x 1500 mm -Cutter weight: 3400 kg -foot pedal -DTR, a technical-functional

Horizontal Machining Center SCHARMANN Ecocut 1.3


X-travel: 2200mm, y-travel: 1600mm, z-travel: 1400mm, max. table load: 5t, quill diameter: 125mm, clamping surface: 4x 1000x1200mm, 2x 1250x1600mm, drive power: 30kW, with pallet changer.

Horizontal Milling Machine BURKHARDT WEBER MC 80


X-travel: 1600mm, y-travel: 1000mm, z-travel: 800mm, B-travel: 360°, max. table load: 3t, drive power: 20kW, clamping surface: 2x 800x800mm, with pallet changer.

Wheel loaders HSW 515 G


Loader HSW 515 G was built by Ironworks Stalowa Wola in 2009 year. HSW-specific data 515 G: -mileage: 30.000 mTh (hours) -engine: Cummins-after overhaul -weight-tires Good Year RL-5 k

Hydraulic Press Brake EHT EHPS 20-40


Pressing force: 200t, press length: 4050mm, column width: 3550mm, installation height: 710mm, stroke: 330mm, inlet depth: 350mm, table width: 300mm, table height: 900mm, speed: 9mm/s, length: 7500mm, width: 3800mm, height: 3540mm, weight: 19.8t.

Concrete block making machines Prometal RHP 500


With RHP 500 concrete products machines we provide excellent medium level entry solution, and also long term solution for many customers. These machines combine durable, heavy duty construction with possibility for assembly various concrete product lines - from simple to fully automatized. Production of high quality concrete products is offered with RHP series of machines: concrete paving stones, hollow blocks, solid blocks, insulated blocks, curbstones, gardening blocks etc... RHP 500: • Production board size: 1400x700 mm • Production area: 1300x650 mm • Production height: 25 - 300 mm

Horizontal Band Saw MEBA 407 A


Clamping surface diameter: 390mm, saw band length: 5120mm, cutting speed: 15-150m/min, clamping height: 10-407mm, clamping width: 10-407mm, cutting range: 407x407mm, cutting range round: 407mm, lowering speed: 0-300mm/min, length: 1400mm, width: 2500mm, height: 2000mm, weight: 3.5t.

Horizontal boring machine TOS H100 A


X - the table is transversal, 1250 mm Y - spindle turret upright, 1000 mm Z - table longitudinally, 1250 mm W - spindle extension, 900 mm Spindle diameter, 100 mm Morse spindle cone execution 6 Power of the drive of the main motion, 7,5 kW Working surface of the table, 1250x1250 mm Capacity of the table, 3000 kg The speed of rotation of the flatbed, 0.8 ... 800 rpm Overall dimensions of the machine (LxBxH), 6000 x 3700 x 3000 mm Total machine weight 13500 kg

Furnaces Naber 2,2 m3


Selling rarely used Naber furnace. Max. heating temperature 1340 C; Outer dimmensions - 3200(L)x1700(W)x2200(H). Power supply - 120 kW. Furnace is in good condition, just new controler and clamps should be installed.

Boring Mills TOS Varnsdorf W9


Horizontal boring machine W9 TOS Varnsdorf K.102259 Diameter of working spindle mm 90 Depth of working spindle mm 710 Vertical spindle adjustment mm 900 (1120) Spindle speed: number of degrees 21 range min-1 14-400 Spindle speed with removable faceplate number of degrees 18 range min-1 28-1400 Speed of the face plate number of degrees 12 range min-1 14-180 Working feeds: 18 degrees in the mm / rev range 0.016-0.8 18 degrees in the range of mm min-1 12.5-600 Micro-axis mm min-1 5 Rapid traverse mm min-1 2400 Threads: 18 metric with pitch mm 0.25-12 24 Whitworth threads / 1 "120-2 Electric motor kW 7.5 Machine dimensions: length mm 3900 (4750, 5120) width mm 2500 (2600) Height mm 2650 (2875)

Tube Bending Machines SCHWARZE WIRTZ PERFEKT WE 100 D T870


Bender socket key SCHWARZE WIRTZ PERFEKT in 100 D T870 built in 1975. Hydraulic bending machine for tubes with electro-hydraulic control system, as well as with pressure device sliding Rails and with hydraulic mandrel drawing inferences is intended primarily for tube bending with mandrel. Specific data: -maximum capacity: 114 mm tube diameter x 6.3 mm wall thickness (for maximum tensile strength 45 kp/mm2) -maximum torque resistance: 55 cc -minimum pipe diameter: 22 mm -the maximum bending radius: 500 mm -minimum bending radius: 50 mm -the maximum bending angle: 180 degrees -the length of the plate shaft steady rest: 4000 mm -bending direction: right -the maximum bend speed, running forward: 0-3.25 RPM continuous adjustment -the maximum bend speed, running back: 5.4 RPM. constant -main motor power: 22 kW -total power requirement: 25 kW Equipment for bending SCHWARZE WIRTZ PERFEKT in 100 D T870: -hydraulic bending with mandrel -traffic control creep -automatically select angle -the length limiter system with 4 fingers przyporowymi -mandrels to sections: 20 PCs. -dies holding the pipe bending: 16 PCs.

Radial Drilling Machines Z 3050 X 16


Radial drilling machine with 3050 X 16 was built in 1989. This versatile general-purpose machine. It is suitable for drilling, countersinking, reaming, chamfering and thread cutting medium and large items. With the right equipment it is also possible to boring. Technical data drilling machine Z3050 X 16: -the maximum drilling diameter: 50 mm maximum range: 1600 mm -the maximum distance between the axis of the spindle and the column: 1600 mm -the minimum distance between the spindle axis and column: 350 mm -horizontal spindle head on your shoulder: 1250 mm -maximum distance from spindle face to the working surface of the base plate: 1220 mm (1250 mm) -minimum distance from spindle to base plate working surface: 320 mm (350 mm) -vertical stroke in column: 580 mm -arm lifting speed: 0.02 m/sec. -angle of rotation of the arm: 360 degrees -taper in the spindle: Morsea Nr. 5 -spindle speed range: 25-2000 RPM. -number of spindle speeds: 16 PCs. -feed range: 0.04-3.2 mm/Rev. -the amount of feeds: 16 PCs. -extension: 315 mm -depth of feed per rotation of graduated: 122.5 mm -maximum permitted torque on the spindle: 490 Nm -maximum permitted weight spindle: 15680 N -the power of main motor: 4 kW -engine power lifting arm: 1.5 kW -engine power the hydraulic lock: 0.75 kW -Coolant pump motor power: 0.09 kW -overall dimensions (l x w x h): 2500 x 1060 x 2655 mm -weight of the machine: ok. 3500 kg (3900 kg with a column guide)

Plasma cutter ECKERT JANTAR 2


Plasma cutter ECKERT JANTAR 2 was built in 2008. The basic technical data cutting ECKERT JANTAR 2:-working width with 2 suportach burners: 2000 mm -cutting length: 6000 mm -the length of the road: 5000 mm -passage speed: 0-20000 mm/min. -cutting thickness (with one burner HARRIS): 100 mm -the type of flammable gas: propane, acetylene, APACHI, natural gas -format programming: ESSI -positioning accuracy: 0.05 mm -supply voltage: 50 Hz/230V/+-5% Part of the basic equipment cutting device JANTAR-2 includes: -computer control system CNC ECS 859:1 PCs. -torch cutting nozzles HARRIS: set of 3/palnik -Central gas Splitter: 1 PCs. -beam portal with guides on the gas hoses and electric cables: 1 set. -the longitudinal rails made of roadway (2000 mm cutting workspace): 1 set. -drive unit wzd?u?my (double-sided): 1 set. -drive unit: 1 set.

CNC Turning Machines MATRA FUL 510x1000


CNC lathe MATRA FUL 510x1000 was produced in 2000. CNC lathe-specific data MATRA FUL 510x1000: -CNC control in Polish and German: Fagor 8055TC (the machine you can program the g code or supplement the ready field in marker overlays) machine reads dxf drawings -Turning length: 1000 mm -turning diameter: 510 mm -spindle speed: 5-2000 RPM -Chuck: fi 250 hydraulic head: 8 items VDi30 -extracted Bridge: increases the diameter of component manufacturing -taper tailstock: Morsea 5 -installed power: 13 KVA -size Lathes (l x w x h): 2500 x 1800 x 1900 mm -machine weight: 2.5 tons of equipment: a variety of high-quality knives for turning the company ISCAR

Concrete paving stone production line HENKE HERMETIK SILENTA SADP 50/300/6


Line for the production of paving tiles from the concrete HENKE HERMETIK SILENTA SADP 50/300/6 was produced in 1982. Line-specific data HENKE HERMETIK SADP SILENTA 50/300/6: -performance line: 800 PCs./day-line mode: semi-manufactured items: 2-ply line has molds for the production of tiles in size:-40 x 40 cm-50 x 50 cm-40 x 60 cm-50 x 25 cm The line includes:-Control Panel-set of forms-production-safe metal-Kit metal and rubber, 3 designs -the receiving machine, plate type HERCULES

Automatic hydraulic press PAWN 100 G


Hydraulic automatic PAWN 100 G was built in 1991 by HYDOMAT-Warsaw, Poland. Technical parameters of the press PAWN 100 G: -nominal pressure: 100 t Jump Mobile disc: 0-70 mm -number of jumps the disc movement.: 10-60 l/min. -maximum operating pressure: 22.5 MPa -maximum pressure: 4 MPa -installed power: 29 kW -the weight of the press: 5930 kg

FORNO PER FUSIONE Marconi


MELTING FURNACE MARCONI 14 RR MODEL YEAR 1999 Marconi BRAND Melting furnace Marconi; automatic metal loader hydraulic controls; capacity 1400 kg; Double burner; wait 1 and 1; 2 wells; side discharge and cleaning; gas powered for more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

PRESSA PER PRESSOFUSIONE Italpresse


ISOLA CASTING ITALPRESSE BRAND Italpresse The MODEL 300 YEAR 1974 Horizontal press for die casting with charger and Lubricator Datasheet Closing power 350 Ton Max power injection 40 Ton Central extraction power 18 Ton Max height 750 mm moulds Minimum height 250 mm moulds Stroke 130 mm 500 mm stroke central extraction platen 960x960 plans size mm Distance within the columns 580x580 mm motor power 18.5 Kw Printable area max 400 cm2 metal pressure Kg/cm2 845 total weight of 14.8 Tons press overall dimensions 1450x6100x1900 h mm For more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

Guillotine Shears STROJARNE PIESOK NTC 2500/4


Guillotine STROJARNE PIESOK NTC 2500/4 produced in 1986 year in Czechoslovakia. The data characteristic guillotine Strojarne Piesok NTC 4 x 2500: -the minimum thickness of cut metal plate: 0.6 mm-maximum thickness of cut metal plate (Rm = 450 MPa): 4 mm-maximum width of cut metal plate: 2500 mm -cutting angle: 1 ' 33 Grad-cutting angle: adjustable -outreach-stand: 200 mm -adjustment range rear bumper: 4-750 mm-main drive motor power: 4 kW -engine power rear bumper: 0.25 kW -infeed bumpers:-dimensions (l x w x h): 3100 x 1600 x 1500 mm-weight: 3800 kg

Fresalesatrice FPT LEM M60


Technical data Running Long. 6000 mm. 1200 Trasv.mm race. Corsa 2000 Vert.mm. Working feeds 6000 mm/min. Rapid feeds 15000 mm/min. Motor power mand. 22 kW. Spindle speed 3000 rpm. Total installed power KW. 57 Data not binding to obtain/verify Date must be Standard equipment CNC HEIDENHAIN TNC 426 C. Auto Tools 40 pos. Auto dual-rotating head 2.5° x 2 .5° Anchor plans mm. diameter 1500x6000

Bed milling machine floor type FPT LEM M60


Technical data Running Long. 6000 mm. 1200 Trasv.mm race. Corsa 2000 Vert.mm. Working feeds 6000 mm/min. Rapid feeds 15000 mm/min. Motor power mand. 22 kW. Spindle speed 3000 rpm. Total installed power KW. 57 Data not binding to obtain/verify Date must be Standard equipment CNC HEIDENHAIN TNC 426 C. Auto Tools 40 pos. Auto dual-rotating head 2.5° x 2 .5° Anchor plans mm. diameter 1500x6000

Injection molding machines Sumitomo electric 130ton SE 130-D


WE HAVE SUMITOMO FULL ELECTRIC MODEL SE-130D SCREW DIA. 28MM. THESE MACHINES HAVE BEEN USED AT THE CLEAN ROOM AND THE KEEPING CONDITION IS GOOD. WE HAVE TOTAL 3 UNITS. YOU CAN SEE AND CONTACT GJCHOI OF GNB IN KOREA

CNC Bending Presses EHT EHPS 11-35


CNC press brake EHT EHPS 11-35 was produced in 1992. Characteristic parameters of CNC presses EHT EHPS 110-3550: -CNC control -maximum pressure: 110 t -maximum length of bending: 3550 mm -maximum length of the pitch slider: 200 mm -the distance between the walls of the body: 3050 mm -outreach: 350 mm -maximum speed bending: 13 mm/s -the maximum distance between a slider and a dining table: 460 mm -the minimum distance between a slider and a dining table: 260 mm -speed: 130 mm/sec. -return speed: 138 mm/sec. -the distance between the bumper: 5-1000 mm -bumper speed: 250 mm/sec. -the height of the bumper over the table: 100-200 mm -a safety distance between the tool and support elements: 128 mm -stop time: 79 ms -the road stopping: 11.3 mm -power of the main engine Y1 + Y2:15 kW -the stopping of the bumper X: 3 Nm -maximum pressure in the hydraulic system: 280 bar -maximum air pressure: 6 bar -oil capacity: 390 l -type of oil: HLPD 46 -operating voltage: three-phase 380 V, 50 Hz -control voltage: 24 V -the total connected load: 21.5 kW -the total rated current: 42 Amp. -maximum switching current: 63 Amp. -machine weight: 9500 kg

Roll Bending Machines LAGAN PRESS AB APT M80BMOH


Rozwijak for sheet metal LAGAN PRESS AB APT M80BMOH produced in 1994. Technical specifications rozwijaka LAGAN PRESS AB APT M8OBMOH: -the maximum width of the circle: 1000 mm -maximum weight of circle: 10000 kg -the maximum diameter of the circle: 450/550 mm-motor: 380 V

Roll Bending Machines STANKOIMPORT IB 2222 V4


Rolling 3-roller for sheet metal STANKOIMPORT IB 2222 V4 16X2000 was built in the Soviet Union in 1984. Trójwalcowa sheet metal rolling mill has a mechanical drive, the yoke of the upper roller is also opened with gears. Technical data winders STANKOIMPORT IB 2222: -width: 2000 mm -rolled sheet thickness in bending: 16 mm -the thickness of rolled sheet at podginaniu: 12 mm -the smallest bending radius: 240 mm -bending speed: 7.7 m/min. -the diameter of the upper cylinder: 270 mm -overall dimensions (l x w x h): 4040 x 2020 x 1745 mm -weight: weight (without Cabinet): 9800 kg -DTR-technical-functional in Polish and Russian Fight for sheet metal bending are intended 2222 IB STANKOIMPORT cold rolled and tapered ring segments of the sheet with a yield T = 250 MPa (25 kG/mm2).

PRESSA PER PRESSOFUSIONE IDRA


PRESSES for DIE CASTING HYDRA Hydra BRAND MODEL OL 220 PRP YEAR 1995 DESCRIPTION Horizontal press for die casting included STP brand charger Datasheet Closing power 2450 KN Max power injection central extraction Power 180 285 KN KN Max height 550 mm minimum height 180 mm moulds molds 500 mm Race racing mobile plan measures Central ejection stroke 100 mm Dimension 765x765 mm Distance plans within the columns 500x500mm Engine power: 22 Kw total weight 10.2 press Ton 1592x5320x2293 h overall dimensions mm for more details and vision of machinery call us at + 39 030 725026 Monday through Friday from 8:30 19:00 13:00 and 14:00 hours at at

CNC Milling Centers INFOTEC 640 G


Milling CNC engraver INFOTEC 640 G was produced in 2007. The machine worked mainly in laminates-a wide range of colors and type (laminate on the outside, inside, silver, gold, imitations metal), aluminium + aluoxyd, Encre noire to capitalize after engraving. Plotter, milling also worked in plexiglass and PVC foamed (was cut). Grawerk? is characterized by high precision work. Milling CNC engraver INFOTEC 640 G-technical data: -area X, Y: 400 x 600 mm -Z axis: 100 mm

Circular Sawing Automatics Elumatec SA73


Automatic saw SA 73/36 Description Suitable for high-volume cutting of aluminium profiles for window manufacturing and industrial applications Material infeed (cycling) protects the surface of the workpiece by means of a single-stage profile lifting system One, two or three-stroke feed can be selected using a selector switch Reliable material feed using two horizontal clamping cylinders Automatic machine shut-down at the end of the profile Pulsed coolant system Equipped with saw blade as standard Technical specifications Cutting range 150 x 110 mm Saw blade diameter 380 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW Compressed air supply 7 bar Air consumption per working cycle 19 l without spraying, 31 l with spraying Length 1,500 mm, depth 1,100 mm, height 1,550 mm, weight 290 kg Feed distance per cycle 5 – 250 mm (up to three cycles possible)

CNC Bending Machines Göteneds FUTURA 20 3X2100


CNC bending machine Göteneds FUTURA 20 3X2100 the Swedish production, was produced in 2007. The machine has a full CNC control, which, along with digitally controlled bumper allows you to perform advanced near-perfect for example. such shapes as the gutter. Upper beam is rotating and can be fitted with two types of tools. Bending machine is equipped with a touch-screen LCD for easy programming and control of the machine. Today the company Göteneds is connected with the Du?s? company CIDAN and belongs to the Petersen Machinery Group. Characteristics: -bending length: 2100 mm The maximum thickness of bending: -steel standard: 3 mm -stainless steel: 2 mm -aluminum: 4.5 mm -motor power beam pressure: 2.2 kW -motor power beam solenoids: 2.2 kW -weight (with beam Combi): 3450 kg Standard equipment of the CNC machine Göteneds CIDAN FUTURA 20 3X2100: -rotating beam type COMBI with auto-lock, trim 300 and quick change tool system shared with a height of 125 mm -driven rear bumper type AMF-1550 -CNC control with graphics and touch screen type CS-301 -CNC controlled slot between the beam and the lower gn?c? -trim the lower beams -adjust the bending speed by inverter -Manual beam deflection compensation solenoids

Elumatec DG104, E555


Double mitre saw DG 104 Description The optimal double mitre saw for series production as well as for special applications The universal pivoting and tilting of both saw units allows cutting of high and wide profiles as well as every type of compound mitre. Consequently, many profiles can be cut without support blocks External-dimension cuts possible for all cutting variants. Consequently, no complicated length calculations are necessary. This is a big advantage when cutting special angles Pivoting range with digital angle display Safety hoods Equipped with saw blades as standard Equipped with digital display E 111 as standard Pulsed coolant system Technical specifications Minimum cutting length at 90° 350 mm Minimum cutting length tilted at 45° 350 mm Pivoting range inwards 90° - 45° (up to 22.5° manual with digital display) Tilting range inwards pneumatically 90° - 45° For cutting range, see cutting diagram Saw blade diameter 420 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output per motor 4 kW Compressed air supply 7 bar Air consumption per working cycle 40 l without spraying, 64 l with spraying Cutting length 6,000 mm Options DG 104 M machine bed made of steel sheet (cutting length 4,500 mm, 6,000 mm) Software for E 555: Software module for chop and oversize length cuts MACHINE IS WELL MAINTAINED AND WORKING WITHOUT ANY PROBLEM. PERFECT CONDITION. MACHINE HAS INCLUDED E555 INDUSTRIAL PC.

Hob milling machines LAMBERT 751


Hobbes gear Lambert 751. Technical parameters of the milling Lambert 751: -module: 1,5/2 mm -the minimum cutting diameter: 2 mm -maximum cutting diameter: 88 mm -speed of the cutter worm: 270-1440 Rpm feed range: 0.075-0.8 mm/min -length of milling (teeth, straight-screw): 25-50 mm -number of teeth: 4-390 -total power: 1.5 kW -machine weight: 400 kg -dimensions (l x w x h): 1.7 x 1.2 x 0.8 m

Rolling mills ZGODA 550L


Rolling machines for rubber CONSENT 550L built in 1967 by the Polish Factories of technical equipment CONSENT in ?wi?toch?owice. The machine has undergone complete renovation in the year 2016 for a total of $118000 NET. The scope of the renovation include gears, bearings, lubrication and a wardrobe. Technical data of rolling mills, rubber CONSENT 550 L: -roll length: 1500 mm -diameter of the rolls: 550 mm -engine power: 100 kW

End Milling Machines Graule, Elumatec 2015


Notching saw AKS 134/65, Graule ASP650 NC Machine is motorized 4 axis controlled and the saws diameter is 650x500mm Description High-performance notching saw for aluminium profiles offering an exceptionally large cutting range For demanding applications in the areas of curtain wall construction, conservatories and special designs Machining is performed with moving saw units while the profile is stationary, which ensures high accuracy and low space requirements Clamping of several profiles is possible due to the wide stop plate Support table with compound slide and pivoting fence is manually adjustable for optimal use of the cutting range Horizontal and vertical profile clamping Automatic working cycle at a 90° pivoting angle (two-hand control when cutting special angles) Hydro-pneumatic saw feed Minimum-volume lubrication system for saw blades Technical specifications Lower saw unit (vertical): Saw blade diameter 650 mm Tilting angle max. 45° towards front and 55° towards back, home position: Saw blade vertical Max. cutting height of 260 mm at 90° Max. cutting height of 187 mm at 135° Max. cutting height of 130 mm at 30° Power supply 230/400 V, 3~, 50 Hz 3 kW of power with motor brake Saw blade speed 1,400 rpm Upper saw unit (horizontal): Saw blade diameter 500 mm Tilting angle max. 55° downwards and 60° upwards, home position: Saw blade horizontal Notching depth, max. 190 mm Power supply 230/400 V, 3~, 50 Hz 3 kW of power with motor brake Saw blade speed 2,710 rpm Travel 950 mm Support table with working height of 990 mm: Pivoting range from 30° left to 30° right, home position, 0° Pivoting range manual with digital display Compressed air supply 7 bar Air consumption per working cycle 35 l without spraying, 45 l with spraying Length 3,000 mm, depth 1,570 mm, height 1,770 mm, weight 1,400 kg

Brazil Icumsa 45


Icumsa 45 white crystal sugar from Brazil..... or other commdities such as corn wheat corn oil ,soyabean etc etc.....

PRESSA PER PRESSOFUSIONE IDRA


HYDRO PRESS FOR DIE CASTING Hydro BRAND MODEL OL 220 PRP YEAR 1995 Horizontal press for die casting included STP brand charger Datasheet Closing power 2450 KN Max power injection 285 KN Central extraction power 180 KN 550 mm mould height 180 mm mould height Racing measurements Stroke 500 mm Cabinet plan Central ejection stroke 100 mm 765x765 plans size mm Distance within the columns 500x500mm Engine power: 22 Kw Total weight of 10.2 Ton press Overall dimensions 1592x5320x2293 h mm

ISOLA PRESSOFUSIONE ITALPRESSE


ISOLA CASTING ITALPRESSE BRAND Italpresse MODELL OAL300 YEAR 1974 Horizontal press for die casting with charger and Lubricator Datasheet Closing power 350 Ton Max power injection 40 Ton Central extraction power 18 Ton Max height 750 mm moulds Minimum height 250 mm moulds Stroke 130 mm 500 mm stroke central extraction platen 960x960 plans size mm Distance within the columns 580x580 mm motor power 18.5 Kw Printable area max 400 cm2 metal pressure Kg/cm2 845 total weight of 14.8 Tons press overall dimensions 1450x6100x1900 h mm

Plastic injection machines THYSON L-25


Production line for PVC pipes THYSON L-25 (1993/2000) is a line of three pipes. PCV line THYSON L25 consists of: -extruder THYSON/PAR 2-88 -extruder side METALCHEM/2T14/8 m -REIFENHAUSER/KKE-R0250 -cooling bath REIFENHAUSER/KKE-R0250 -cooling bath REIFENHAUSER/KE25/4 -saw SICA/TSQ -REIFENHAUSER kielichuj?cy/BA. CAH. 1T 50.250 -dust Extractor SICA model P-250/4 Technical data: -production performance: up to 350 kg -capacity: 75-250 mm -reconditioned in the year 2016

Plastic injection machines WEBER WE 7.40


Production line for PVC pipes WEBER in 7.40 (1996/2013) is a line of three pipes. PCV line WEBER in 7.40 includes: -extruder WEBER in 7.40 -dryer TECH MAIN/HOT AIR DRYER EST 960 -extruder of paskownic? METALCHEM/T25-25-22-91 -head with fi 90-400 type: PHPO 40 -vacuum: 2 PCs. -bath tub shower faucet: 3 PCs. -stamp marker R Jas?o -dust Extractor -saw IMP TP 630 -channel tray -water filter with housing and connection Technical data: -production line for PE pipes: fi 90 to fi 400 -capacity: 600 kg

Carousel Turning Machines (Lathes) CONDOR KROMERIZ STANKO 1516


Maximum diameter of folding support: 1600mm Maximum turning diameter by side support: 1600mm Maximum workpiece height: 1000mm Max. workpiece weight at revolutions of the clamping plate 4-125ot / min 6000kg 150-200ot./min. 2400 kg Number of steps for horizontally adjusting the support: 18 Feed rate range for adjustment: 5-1840 m.min Number of slides for slide: 18 Slide displacement range: 0.03-12.5mm / revolution of the clamping plate Number of positions of the turret head: 5

Sheet-metal-stamping trimming press Voronezh KV2536,400T


Maximum force ton-force 400 Slider stroke length mm 250 Slider stroke length to lower position mm 12 Slider strokes per minute 25 Number of single turn-on 19 Maximum distance between table and slider (in lower position of slider) mm 510 Adjustment mm 160 The sizes of a under-forginig plate mm 1000 Table overall dimensions: mm - from front to rear 1000 - from left to right 1000 The sizes of an aperture in a table mm 630 Slider overall dimensions mm 800 x 800 window dimensions in cheeks mm 600 Total power of electric motors kW 43,3 Press overall dimensions mm - length 3470 - width 3140 - height 5940 Press weight without hydropneumatic pillow kg 31 400

Horizontal Milling Machines Kitamura Mycenter H500


OVERVIEW: Brand: Kitamura Model: Mycenter H500 Application type: Milling Machine type: Machining Center Availability: Immediately Construction year: 1989 Production hours: 23200 Location: Germany Origin country: Japan GENERAL DATA: Measurements width: 7500 mm Measurements depth: 3800 mm Measurements height: 2910 mm Machine weight: 15000 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 35-8000 1/min CONTROL UNIT: Brand: FANUC Model: 15M MOVEMENT: X-AXIS movement: 710 mm Y-AXIS movement: 610 mm Z-AXIS movement: 610 mm MEDIA: Chip conveyer: yes ADDITIONAL EQUIPMENT: 1 - Tools 1 - Tool holder

Welding Machines KT7 KTP 300-150


Plasma cutter KT7 KTP 300-150 manufactured in 2016. The set includes: plasma source, plotter and screw compressor. Technical Data: -field work: 150 x 300 cm -precision stepper motor-based drives (servo motor) -the structure of the gate running, Y axis -double sided operator coupled mechanically -the application of very rigid and stable frame structure -Y axis: 4.7 NM ratio -X axis: 3.2 NM -Z axis: 3.2 NM -working speed for G0:16000 mm/min. (40000 mm/min-with servo motors) -water table which gives a cleaner cut, cooling and reducing emissions of gases during machining -corrosion protection design of hot galvanizing and specialised polyurethane paints -metal detection -protection system corruption of a burner -torch height control over the sheet of THC -handle antykolizyjny burner -precision ustawoanie punching sheet metal (longer life supplies the burner) -modern desktop operator with 19 "screen and the computer -external USB port that allows you to open files using the pen-drive -high precision cutting does not require further complex machining -software based on Linux-much greater stability than Windows -the total weight of the machine: ok. 800 kg CAM Software: -burning outside the useful edge -external, internal offsets -import files in DXF format -selection of parameters of smoking -software in Polish language SheetCam program to generate common shapes and simple distribution of parts on the sheet Screw compressor-technical data: -power: 5.5 kW -pressure: 8 bar -capacity: 0.85 m3/min. -capacity: 51 m3/h -weight: 340 kg -tank: 500 L -dimensions (l x w x h): 2030 x 650 x 1500 mm
Find used machinery dealers in your country