135,980 used machines on RESALE, but how to find them? Machine Search
pressure: 28 t distance between columns: 510 mm dayligth: 380 mm stroke: 260 mm weight of the machine ca.: ca. 750 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-2262-242-009 inlet pressure: max. 27 bar outlet pressure: 0 - 7 bar stainless steel ! Dimensions: 120 x 120 x 60 mm
SPECIFICATIONS: Briquettes: Ø 60 mm Production: 70 kg/h Installed power: 7.5 kW EQUIPMENT: 1 mini silo
Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-2261-242-010 inlet pressure: max. 27 bar outlet pressure: 0 - 3.5 bar stainless steel ! Dimensions: 120 x 120 x 60 mm
with additional vacuum insert (sack)
110 Tons Press Machine 70-55 table size, 48-33 between colons with PLC Hydrolic
Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM Type: 44-3262H283-001 Inlet pressure: max. 35 bar Outlet pressure: 0 - 7 bar stainless steel ! Mint ! Dimensions: 140 x 140 x 100 mm
The PME 400-1700 C is a mechanical C-frame press manufactured by PME Pressen- und Maschinenbau Erfurt GmbH. While specific details about the 2018 model are limited, based on PMEs product offerings and industry standards, the following information outlines the typical features and specifications of this press model --------------------------------------------------------------- Key Specifications - Pressing Force: 400 kN (approximately 40 tons) - Table Width: 1,700 mm - Frame Type: C-frame (single-column) - Drive System: Mechanical eccentric drive via countershaft - Clutch-Brake System: Pneumatically or hydraulically operated combination - Ram Guidance: Precise sliding guide or roller recirculation guide - Stroke Adjustment: Fully automatic and electronically monitored - Ram Adjustment: Motorized - Overload Protection: Hydraulic system Find more here - .ucymachines/ Contact us at ...
Key data: 400 t, 160 mm
Nominal forming force of the press 400 t Table 1250x825 mm Dimensions of the ram 900x560 mm Lifting of the ram 30-160 mm Machine weight 22 T Power of the main electric motor 30 kW Dimensions L x W x H --> 1550 x 2900 x 3360 mm complete with press line = Production LASA, Spain year 2008 = - Decoiler 4 t - coil width 400 mm, coil outer diam. 1600 mm Coil inner diameter 450/550 mm, unwinding speed up to 25 m/min - Pre-feed machine RAPID PRESS max. width 420 mm, material up to 3 mm, max. speed 70 m/min - Documents, electrical diagrams, etc.
Dough dividing and rounding machine Bun press Fortuna Automat Size 3 Partial head reworked with stainless steel knife NEW Dough insert up to 2300g depending on TA Dough divider without knitting plate E-system NEW DGUV V3 tested Connection 400V, 1.6 kW, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine overhauled + Spare parts service Option: Platform or chassis Maintenance contract Warranty E-Box Service Package We have a wide range of bread presses!
Offer 25021 Technical data approx.: - Compressive force 250 t - Projection 360 mm - Table size approx. 1100 x 800 mm - Diarrhea hole in the table approx. 320 mm - Tappet area approx. 800 x 475 mm - Peg hole in the tappet mm - Plunger adjustability 110 mm - Stroke adjustment 30 - 140 mm - Max. stroke rate 45 1/min - Pneumatic connection 6 bar - Drive 400 V / 22 kW - Space requirement approx. W 1400 x H 2990 x D 2700 mm - Weight approx. 13 T
SMG 320 cold forming press for sale. Year of build 1981 Model HPU 315-1300/1150 The machine has a crack in the head piece. Total weight around 43 tons Drive power: 2 x 55 KW Oil volume of one tank filling 3800 liters Maximum ram force: 3200 KN Drive cylinder: 3 pieces Cylinder 1: 2000 KN Cylinders 2+3: 600 KN each maximum adjustment: 310 mm Pressing Force: 315 tons Find more here - .ucymachines/ Contact us at - sales@ucymachines
For Sale: Hammelmann Aquajet 204 High-Pressure Pump Unit – Demo Model Model: Aquajet 204 Machine No.: C5.02204.1617 Year: 2025 Engine Power: 200 kW - 2150 RPM Pressure Rating: Up to 2800 bar - 40 l/min Plunger Diameter: 20 mm Oil Type: PAO ISO VG 320 Oil Quantity: 12.5 litres Condition: Demo model – very well maintained Current Hours: Approx. Less than 500 (still in use; hours may increase) Crankcase: Filled with high-quality synthetic oil (Shell Omala S4 GX 320) This unit is ideal for hydrodemolition, surface preparation, industrial cleaning, and other ultra-high-pressure applications. Still in operational use and available for inspection.
2004 Alphatech Model RPS4000 Description: Electro-hydraulically driven frame press Series: Type:RPS 4000 Date of manufacture:12.2003 plunger force From approx. 4000 kN kN plunger force Up to approx. 916 kN kN plunger stroke approx. 600 mm Installation table - column max. 1050 mm Max. plunger rapid speed approx. 600 mm/sec Max. Splunger working speed approx. 41.7 mm/sec Max. Return speed approx. 440 mm/sec Table surface (WD) approx. 900965 mm Full volume Hydrauliko! HLP 46 approx. 5300 litres Main drive power 290 kW+ 255kW + 130kW Control voltage 230 VAC/ 24VDC Operating voltage 400 V /50 Hz Colour scheme: System RAL 1014 Control cabinet, control panel and hazard labelling RAL 2002 Find more here - .ucymachines/ Contact us at - sales@ucymachines
Liebergeld Li-transmatic Colombo Agostino for sale. Year of build 1990 Model G 400/1100/250/5 Nominal pressing force: 4000 KN Stroke : 250 mm Infinitely variable stroke rate: 20 - 60 1/min Table top usable, width x depth: 1100 x 900 mm Plunger plate usable, width x depth: 1050 x 800 mm Installation height, bottom stroke, top adjustment: 720 mm Vertical adjustability of the ram: 20 mm Table ejector cam-controlled Find more here - .ucymachines/ Contact us at - sales@ucymachines
For Sale: Hammelmann Aquajet 204 High-Pressure Pump Unit – Demo Model Model: Aquajet 204 Machine No.: C5.02204.1617 Year: 2025 Engine Power: 200 kW - 2150 RPM Pressure Rating: Up to 2800 bar - 40 l/min Plunger Diameter: 20 mm Oil Type: PAO ISO VG 320 Oil Quantity: 12.5 litres Condition: Demo model – very well maintained Current Hours: Approx. 500 (still in use; hours may increase) Crankcase: Filled with high-quality synthetic oil (Shell Omala S4 GX 320) This unit is ideal for hydrodemolition, surface preparation, industrial cleaning, and other ultra-high-pressure applications. Still in operational use and available for inspection.
Offer 25020 Specifications: - Compressive force 200 t - Projection 400 mm - Table size approx. 1000 x 750 mm - Diarrhea hole in the table approx. 320 x 220 mm - Pushrod area 940 x 400 mm - Plunger adjustability 100 mm - Stroke adjustment 20 - 130 mm - Drive 380 V / 10 kW - Space requirement approx. W 1400 x H 2980 x D 2900 mm - Weight approx. 13000 kg
pressure: 40 t stroke: 250 mm total power requirement: 6 kW weight of the machine ca.: 3 t distance between columns: 600/350mm mm table surface area: 860x620 mm ram surface: 860x620 mm table height: 900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SPECIFICATIONS: Installed power: 9.2 kW Briquette size: Ø 70 mm Complete with 13 filter bags (Ø 160 x 550 mm)
pressure: 300 t distance between columns: 1350/1000mm mm stroke: 500 mm weight of the machine ca.: 20 t table surface area: 1900x1600 mm ram surface: 1900x1600 mm table height: 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 7 t throat: 180 mm stroke: 100 mm table surface area: 300x300 mm ram surface: Ø105 mm hole in the table: Ø60 mm table height: 1050 mm tool hole in ram: Ø30 mm total power requirement: kW dimensions of the machine ca.: BxTxH 1200x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS PLC SIEMENS S7 PRESS DESIGN drive system: link drive feedstock transport direction: left to right SLIDE total force (nominal): 80 to stroke: 50 mm stroke rate (max.): 80 /min COUNTER RAM nominal force: 22 to stroke: 8 mm V-RING nominal force: 25 to stroke: 15 mm TOOL DIMENSIONS lower table (left-right): 420 mm lower table (front-back): 420 mm upper table (left-right): 420 mm upper table (front-back): 420 mm shut height max.: 220 mm ram adjustment: 80 mm distance between columns (H-frame): 450 mm passline opening (free passage in side columns): 200 mm OVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 180 mm sheet thickness max.: 5 mm feed velocity max.: 999 m/min STRIP-FEEDER feeder type: roll feeder sheet width max.: 180 mm sheet thickness max.: 5 mm feeding step max.: 999 m ...
Qty. 1 Second-hand aluminium extrusion press line Mfc.: TCS, Asimakis, Sistem Teknic Force: 2200 MT Billet dia.: 8” Built: 1979 Still in operation! Type: Hydrauli horizontal Hydraulic pressure: 235 bar Scope of supply: Billet Loader Billet Furnace Hot Shear Billet Transfer Table Extrusion Press Run-Out Table Single Puller Cooling Table Stretcher Profile Stacker Ageing Furnace
Erika Record Gr. 7 20 pcs dough dividing and knitting machine Year:2017 - Manufacturer: Erika Record Karl Schmidt GmbH - Semi-automatic roll press - To share and make an impact - Weight range: 70gram to 160gram - Type: 7 20 pcs - 20 pieces - 400 Volt 0.75kW 50Hz - Year of construction 2017
Eccentric shaft by drawing K04.038.842-22-402 for hot stamping press K04.038.842 (K8542), 1600T brand new in state stale from stock W 4675 kg
Specifications: Working length: 4100 mm Stand width: 3650 mm Press force: 220 to CNC control: OPERATOR OPII graphic Color Screen Size: 14" Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Mot. adjustable back gauge Projection: 420 mm Stroke: 180 mm Auto. Crowning Laser monitoring Motor power: 17 kW CE mark Dimensions (length x width x height): approx. 4800 x 2300 x 2900 mm Weight: approx. 16 tons Accessories: various tools
Specifications: Working length: 6200 mm Pressing force: 400 tons CNC control: CYBELEC ModEva 10S Number of controlled axes: 7 Controlled axes: Y1/Y2; X/1; R; Z1/Z2 Stroke: 315 mm Projection: 410 mm Crowning Motor power: 75 kW Tool clamping at the top and bottom Laser monitoring: FIESLER Dimensions (length x width x height): approx. 6300 x 2500 x 3850 mm Weight: approx. 40,5 tons Accessories: many tools Zustand / condition: very good condition
Specifications: Working length: 3100 mm Stand width: 2650 mm Pressing force: 100 tons CNC control : AMADA OPERATOR II 14-inch TFT color screen Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Mot. adjustable back gauge Projection: 415 mm Stroke: 200 mm Working height: 960 mm Crowning Engine power: 9 kW Dimensions (length x width x height): approx. 4300 x 2300 x 2950 mm Weight: approx. 8 tons Accessories: 1 set of segmented AMADA tools
Specifications: Working length: 3100 mm Stand width: 2650 mm Pressing force: 125 tons CNC control: AMADA OPERATOR II graphic 14-inch TFT color screen Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Automatic crowning Mot. adjustable back gauge Projection: 300 mm Stroke: 180 mm Working height: 960 mm Infrared photocell vertical and horizontal : SICK Motor power: 11.5 kW Dimensions (length x width x height)): approx. 3500 x 2200 x 2900 mm Weight approx. 9 tons Accessories: 1 set of AMADA tools 1 die : V50-35-22-16
Specifications: Working length: 4100 mm Stand width: 3650 mm Press force: 170 to CNC control: OPERATOR II grafic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Mot. adjustable back gauge Projection: 300 mm Stroke: 200 mm Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: 1 set of tools
Specifications: Working length: 3100 mm Pressing force: 150 tons CNC control: ARA TS1 2D simulation touchscreen Controlled axes: Y1/Y2; X; R; Z1/Z2 Mot. adjustable back gauge Stroke: 300 mm servo-electric drive Tool holder : MODUFIX Motor power 22 kW Dimensions (length x width x height): approx. 4000 x 2300 x 2900 mm Weight: approx. 13 tons
Specifications: Working length: 1600 mm Pressing force: 32 tons CNC Control: TS1 2D Simulation Touch Screen Controlled axes: Y1/Y2; X Mot. adjustable back gauge Stroke: 215 mm servo-electric drive Crowning Tool clamping: WILA system Working height: 910 mm Motor power : 6 kW Dimensions (length x width x height): approx. 2000 x 1900 x 2100 mm Weight: approx. 3,3 tons Accessories: 1 set of new tools
Specifications: Working length: 3050 mm Distance between stands: 2690 mm Pressing force: 130 tons CNC Control: DELEM DA69 adjustable back gauge Controlled axes: Y1 / Y2; X; R; Z1 / Z2 CNC Table Bending Compensation MODUFIX clamping hydr. Tool clamping at the top and bottom Pneumatic tool displacement Angle measuring system Stroke: 365 mm Projection : 410 mm 2 pcs bending aids Motor power: 12.5 kW CE mark Dimensions (length x width x height): approx. 3800 x 2350 x 3150 mm Weight : approx. 13 tons Accessories: Tool Condition: good condition
Fully automatic baler Manufacturer: PAAL Type KONTI 275 D Year of Make: 2000 specifications: Press force: 75 t Drive power: 1 x 45 kW Total connected load: kW __ / 170 A Throughput under operating conditions: 280 m³/h Filling opening: 1,020 x 1,550 mm Bale size:750 x 1,100 mm Binding: 4-fold vertical incl. front printing plate slot cover Machine weight: approx. 25 t Bale weights: up to approx. 600 kg Including: - Free kicks - Large digit display
Good day We hereby offer you a used baler from the manufacturer HSM, type VK 4812. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer: HSM Type VK 4812 Year of construction: 2011 Operating hours 20,580 hours Pressing force main press 48 t Drive power 30 kW Machine weight press 12 t The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be happy if this machine is interesting for you. Your service team Mertens & Frowein GmbH
Falch Pressure Washer R10/800, 1000 bar; only 2939 hours in use; complete with accessories as well as two rotary guns. Price basis for negotiation: 15.000,00€ net! If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055
Inv. Num. : 8150 Type: PDqV 4-500 Producer: KRUPP Created: 1972, GO 2008 Parameters: Compressive force: 500 t Table length: 3000 mm Table width: 1800 mm Distance between frame walls: 3100 mm Maximum stroke rate upper table: 11 1/min Ram stroke: 850 mm Adjustment of the ram: 350 mm Main motor power: 75 kW Machine weight: 158000 kg According to the GO in 2008, the press was in operation for a maximum of 100 hours. In the years 1972–2008, the press was operated in two shifts.
Inv. Num. : 8191 Type: Xpert 320 Producer: Bystronic Created: 2018 Parameters: Compressive force: 320 t Maximum bending length: 4100 mm Lifting height: 565 mm Motor power: 30 kW
Pressing and joint-setting machine Book height : 100 - 520 mm Book width : 120 - 450 mm Book thickness : 6.5 - 100 mm Output : approx. 150 books/hour (depending on the material used)
Manufacturer: Lauffer Model: 400 T Year of Manufacture: 1992 Type of Machine: Hydraulic Press - column-guided, but (without die cushion) - contactor control - digital position measuring system, Technical Data - Max. Pressing Force: 4000 kN - Max. Return Force: 340 kN - Ram Stroke: 500 mm - Installation Height (Platen/Ram): 1100 mm - Column Clearance (Front/Side): 1200 mm / - - Table Size: 1200 × 800 mm - T-Slots on Table (DIN 650): 22 H11 mm - Table Height: 850 mm - Ram Surface: 1200 × 800 mm² - T-Slots on Ram (DIN 650): 22 H11 mm - Drive Power: 76 kW - Max. Operating Pressure: 290 bar - Control Pressure: 90 bar - Machine Weight: 23000 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines
Dough dividing and rounding machine Bun press Fortuna Automat Gr. 3+ with active shutdown Head cleaning to the back Partial head reworked with stainless steel knife NEW Dough insert up to 2400g depending on TA Dough Dividers 30 Pieces/Piece with rewind button E-system NEW DGUV V3 tested Connection 400V, 1.6 kW, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine overhauled Option: Stainless steel pedestal Wirkteller Neu Service Package Maintenance contract Instruction & Commissioning Delivery With us you will find one of the largest selection of bun presses!
Working width: 120 mm Working height: 1200 mm : 6000 mm Number of cylinders: 12 St. 1 pc. LAMINATION PRESS Type SLV - H - 6.0 - 1.2 - 120 - 6V - II -P -------------------------------------------------------- Technical specifications -------------------------------------------------------- working dimensions: Length: 6000mm Height: 1200mm Gluing thickness: 20 - 120 mm Number of pressure cylinders: 12 pcs. Cylinder type: Ø 63 x 120 mm Max. force per pressure cylinder: 50 kN Specific pressure: 7.5 kg/cm2 Number of hold-down devices: 6 pcs. Cylinder type: Ø 40 x 100 mm Max. force per hold-down device: 20 kN Number of sections: 2 Max. pressure: 160 bar Power: 3.0kW Pump flow: 10L/min Manual control with hydraulic valves every work surface in contact with glue is covered with INOX Materila covered each pressure cylinder and the hold-down device can be locked separately equal pressure in each ...
pressure: 75 t stroke: 250 mm daylight longitudinal/sideways: 800 x 215 mm dayligth: 170 - 885 mm working pressure: 7,5 - 8.5 bar weight of the machine ca.: 0,45 t dimensions: 1,2 x 0,8 x 2,1 mm Hydraulic/pneumatic workshop press Cylinder can be moved sideways pneumatic foot pedal Winch for table height adjustment 2 pcs. pressing blocks CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Orma LS/ECO/CA 30/13 self-loading press Working length 3000mm Working width 1300mm Automatic material loading Adhesive Application System Shelves heated with oil up to 130C Upper clamping force 57t Side clamping force 9t Year of production 2001 CE Certified
Hot press Make: ORMA Type: NPC/DIGIT 6/95 New machine Technical datas: Press area: 3000x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (120°C) Optional: - Aluminium coating for panels - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - 4 side loading - Max. temperature up to 150°C - Max. temperature up to 200°C - Mylar protection foil - Pressure plate covered with glass fier fabric Teflon - Hardware for Industry 4.0
Hot plate press (electric) Brand: ORMA Type: NPC 6/120 new machine Technical data: Heating plates: 3500x1300mm Cylinder: 6 pieces Press force: 120t Stroke/opening dimension: 450mm Connection value: 28.8kW (ELKOM plates) Options: - Intermediate plate - Anodized surface for ELKOM panels - Parallelism sensor á 1,000.00 EUR - Pressing mechanism from above (fixed lower plate) - Max. temperature till 150°C - Max. temperature till 200°C - 4-sided loading possible - Mylar protective film - Fiberglass Teflon protection - Hardware for Industry 4.0
Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 64 mm Free frontal opening L-R: 1100 mm Free lateral opening F-B: 250 mm Table surface area : 1080 x 650 mm Slide area: 980 x 420 mm Hole in table: 1060 x 200 mm Number of strokes: 100 - 750 s.p.m. Required power: 22 kW Working hours machine: 16850 h Height over floor approx.: 2471 x 1278 x 3150 mm Weight of machine approx.: 9 ton
Press capacity: 50 ton Ram stroke: 54 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 303 mm Table surface area : 810 x 550 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 7,5 ton Main Motor: 11 kW
A dismantled Mecamaq hydraulic press is available. Pressing force: 100t, max. pressure: 290bar, main piston diameter: 200mm/120mm, auxiliary cylinder diameter: 40mm/25mm. Main cylinder working stroke: 500mm, max. installation height: 800mm, working height: 800mm, effective dimensions X/Y: 700mm/500mm, table dimensions X/Y: 800mm/500mm, working speed: 6mm/s, return speed: 150mm/s. Max. tool dimensions X/Y: 800mm/600mm, max. tool weight: 1000kg. Machine dimensions X/Y/Z: approx. 1000mm/1350mm/2750mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible.
maximum number of results exceeded
please refine your search
