136,416 used machines on RESALE, but how to find them? Machine Search
Wheel diameter: 680 mm sawblade length: 8550 mm Sawblade width max.: 1,3 mm Cutting height: mm Motor output: 20 kW Table dimensions: 600 x 620 mm Feed speed: m/min. Machine height: mm Weight: 10.000 kg Bandsaw horizontal, Precision-Saw for Silicon (Solar industry) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 120 mm gear width: 160 mm max. module: 3 min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Two Flank Gear Tester The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 400 mm gear width: NA mm max. module: 5 min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Manual Two Flank Gear Tester The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Power: 7,5 KW Receiver: 270 L weight of the machine ca.: 180 Kg dimensions of the machine ca.: 1700x600x1270 mm feed pressure: 10 bar liter capacity: 850 l/min connected load frequency: 400 V The UWM 7.5 / 850/270 K30 + start box with K30 pump, V-belt drive, is suitable ideal for use at home, in the workshop, in industry and for heavy work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Power: 7,5 KW Receiver: 500 L weight of the machine ca.: 300 kg dimensions of the machine ca.: 1,7x 0,6 x 1,45 m feed pressure: 16 bar liter capacity: 870 l The UWM 10/870/500 K50 + Startbox is equipped with a K50 pump. Note that this is a high-pressure version (especially for trucks or places where higher pressure is required), Industry and hard work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The UWM 10/870/500 is available with 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 8,0 kN stroke: 40 mm throat: 90 mm Working height from to: 50 - 200 mm table surface area: 120 x 160 mm weight of the machine ca.: 22 Kg dimensions: 160 x 230 x410 mm Knee lever hand press with fine height adjustment SPECIAL PRICE! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 199,5 x 67,5 x 64 mm operating pressure: 2,5 - 8,0 bar air consumption at 6 bar: 350 l/min weight of the machine ca.: 0,23 t dimensions: 2,10 x 1,30 x 0,88 m Duo blast cabinet 10 PET sheets to protect the windows 10 PET sheets to protect the fluorescent lighting 2 foot pedals 2 jet guns 6 ceramic nozzle inserts (6 mm diameter) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 680 mm capacity 90 degrees: square: 640 mm : 820x610 saw band length: 5850 x 41 x 1,3 mm band speed: 15 - 100 m/min table height: 800 mm total power requirement: 5,5 kW weight of the machine ca.: 4,45 t dimensions of the machine ca.: 5,85 x 3,6 x 2,7 m 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effo ...
Wheel loader 40 kw/55 hp 3-cyl.- Perkins Turbodiesel, all-wheel drive, articulated steering, year of construction 1990, operating hours: 6430, tires BKT 14.5-20 MPT 567 12 PLY, tread depth approx. 90 %, mechanical quick coupler, loading bucket, stacking device with pallet forks 1100 mm Machine weight approx. 5.5 tons, bucket capacity approx. 0.85 cbm. Age and use-related wear, paint defects, play in the articulated joint (adjustable), windshields complete, direction switch, fuel pump and hydraulic hoses in the articulated joint already replaced. Static tipping load straight / kinked 3530 /3175 kg, lifting capacity 50.6 kN (Information from sales manual Zeppelin, without guarantee). Engine and hydrostatic drive in order, no leaks. Foot brake rusty, locking brake works. Electrics with defects (e.g. front lighting, switching gears). Age- and use-related optical defects and traces ...
Vertical stainless steel tank of the APV BAKER IBERICA brand, 4,800 liters., manufactured in 1989, the equipment has a configuration on legs, with upper and lower bottoms of conical geometry and agitation system by means of a three-blade propeller. The tank is equipped with a Ø450 mm upper manhole, two Ø180 mm sight glasses and different connections for process integration. It has a side socket for sampling, DIN20 and 3/4" side connections and DIN32 and DIN50 top connections. The body and both bottoms are 3 mm thick. The discharge is 240 mm high with a 2" junction Volume Total capacity 4800 L Material: Stainless Steel Technical characteristics Year of manufacture 1989 Vertical Orientation and Installation Tripala helix agitation On legs Tapered bottom Tapered top bottom Manhole on top bottom Equipment dimensions Body height 1000 mm Body thickness 3 mm Bott ...
Machine was regularly serviced, was in operation until recently, with documentation and accessories, an on-site inspection is possible.
capacity 90 degrees: round: 680 mm capacity 90 degrees: square: 640 mm : 820x610 capacity 45 degrees: round: 550 mm capacity 45 degrees: square: 550 mm capacity 45 degrees: flat: 550x600 mm capacity 60 degrees: round: 370 mm capacity 60 degrees: square: 370 mm capacity 60 degrees: flat: 370x600/450 mm saw band length: 7260 x 41 x 1,3 mm band speed: 15 - 100 m/min table height: 800 mm total power requirement: 5,5 kW weight of the machine ca.: 4,8 t dimensions of the machine ca.: 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new B&S positioning system”. reached. An intelligent NC contro ...
This 5-axis POSmill H 800 U was manufactured in 2015. It features a maximum spindle speed of 18,000 rpm and a table size of Ø 800 mm, with a maximum table load of 1,200 kg. The machine includes a 96-fold tool changer and advanced Heidenhain control unit. If you are looking to get high-quality machining capabilities, consider the POSmill H 800 U vertical machining centre we have for sale. Contact us for further details.
This 3-axis DMG MORI ecoMill 800 V was manufactured in 2015. It features an X-axis travel of 800 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine is equipped with a spindle speed of 12,000 rpm and a BT40 taper. If you are looking to get high-quality machining capabilities, consider the DMG MORI ecoMill 800 V vertical machining centre we have for sale. Contact us for further details.
BVLs Niagara DFS 800-2T was manufactured in 2015. It features a useful length of 800 mm and a carrying capacity of 150 kg. The machine includes two tanks, each with a volume of 1,100 L, and operates at temperatures between 45 °C and 60 °C. If you are looking to get high-quality cleaning capabilities, consider the BVL Niagara DFS 800-2T machine we have for sale. Contact us for further details.
Suitable for cleaning cooling oil for grinding hard metal. Accessories: 2 filter towers, Automatic backflushing, Chiller, container content: 800 l, flow capacity max: 60 l / min., Flow rate max: 60 l / min., Filter fineness:: greater than 0.003 mm, Connected load approx.: 9.0 kW (400 V / 50 Hz), Dimensions W x D x H: 1700 x 1100 x 2400 mm, Weight approx.: 710 kg, colour: light grey
8-spindle lathe, Number of spindles: 8
Control: Manufacture: HEIDENHAIN iTNC 530 x-travel: 800 mm y-travel: 500 mm z-travel: 540 mm table-size: 910x500 mm spindle turning speed range: 10000 U/min tool magazin:: 24 weight of the machine ca.: 8 t HEIDENHAIN TNC-426 Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 25115 Radial arm - Schiffterschnitt - Pendulum train saw Specifications: - Saw blade diameter 400 mm - Saw blade speed 3000 rpm - Cutting height up to approx. 125 mm - Cutting depth up to approx. 600 mm - Mitre adjustable in 2 axes - Table size approx. W 800 x D 800 mm - Table height 920 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 800 x H 1900 x D 1100 mm - Weight approx. 200 kg
Very large weigher specifically for fresh/humid fruits, meat, vegetable etc. - Weighing unit with 8 linearly arranged weighing heads, memory hopper for a higher accuracy and speed , spiral conveyor supply. Suitable for the filling into bags, skins, cans, jars etc., easy to clean. - Specifications: stainless steel | protection class IP65 | max. speed of the machine in neutral: 45 cycles/minute | weighing range 10-2500g. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All ...
Multi-head weigher specifically for fresh/humid fruits, sliced or pulled meat, vegetable etc. Weighing unit with 8 linearly arranged weighing heads and 8 memory hopper for a higher accuracy and speed , spiral conveyor supply. - Suitable for the filling into bags, skins, cans, jars etc., easy to clean. - Specifications: max. speed of the machine in neutral: 45 cycles/minute | accuracy: +/- 0.1-3.0g | hopper volume: max. 1l | weighing range: 10-2000g | power: 220V, 1.5kW | stainless steel | IP64 | machine dimensions and weight: L2320xW840xH1820mm, 350kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In additio ...
Multi-head weigher specifically for fresh/humid fruits, sliced or pulled meat, vegetable etc. Weighing unit with 8 linearly arranged weighing heads and 8 memory hopper for a higher accuracy and speed , spiral conveyor supply. - Suitable for the filling into bags, skins, cans, jars etc., easy to clean. - Specifications: max. speed of the machine in neutral: 50 cycles/minute | accuracy: +/- 0.5-2.5g | hopper volume: max. 0.5l | weighing range: 20-500g | power: 220V-240V, 1.5-2.0kW | stainless steel | IP54, weighing heads and memory hopper are made of polypropylene | machine dimensions and weight: L1294xW789xH1100mm, 320kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 d ...
Fully automatic liquid filling machine with 8 filling heads for filling volumes of different alternative ranges: ONE of the following ranges can be choosen from: a.) 25-250, b.) 50-500 or c.) 100-1.000ml. Conveyor: adjustable speed control, MITSUBISHI touch screen, bottle mouth positioning system, filling heads moved down and up during filling process (foam products). - No-bottle-no-filling device, suitable for various liquids (cosmetics, perfumes, flower oil, liquor, etc.). Stable performance and accurat filling with cold and hot liquids. -Specifications: max. speed of the machine in neutral: 80 cycles/minute | stainless steel version | power supply: 220V | compressed air: 6bar: power consumption and consumption of compressed air depending on filling volume range - machines dimensions too. That machine/system is available in different versions for different packaging sizes and with diff ...
Volumetric cup filler for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: filling range: 1-100ml | volume of hopper: 30L | number of dosing cups: We select a suitable cup version for you (1 or more heads) according to your product and the required filling quantities. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 300-800kg/h (with max. 5m conveying distance) |housing: stainless steel 304 | required compressed air: 0.6 MPa | air consumption: approx. 20L/min | power supply: 220V | power consumption: 3kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
X-ray inspection system for very small packages. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 85 mm | detection accuracy: Pb from ? 0.2 mm, Fe from ? 0.28 mm, SUS from ? 0.28 mm, non-metallic such as stone, glass, from ? 1.2 mm | X-ray output: 150 kVp, 7.5 mA | X-ray detector resolution: 0.4 mm | X-ray emissions: < 1usv/h | X-ray beam: vertical scan | conveyor belt height: 900 ? 30 mm | conveyor speed (dependent on product dimensions): 10 ?100 m/min | screen: 15 touch screen | software: intellisens?X-ray | operating temperature: 5 ? 35 ?C | reject system: optionally available according to requirements | power: 220VAC, 50/60Hz | dimensions of the system: L1500xW1300xH1810 mm | weight: 455 kg. Please note that our new prices are often below the usual used prices. Please feel free to inqui ...
X-ray inspection system specially designed for glass bottles. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 85 mm | detection accuracy: Pb from ? 0.2 mm, Fe from ? 0.28 mm, SUS from ? 0.28 mm, non-metallic such as stone, glass, from ? 1.2 mm | X-ray output: 150 kVp, 7.5 mA | X-ray detector resolution: 0.4 mm | X-ray emissions: < 1usv/h | conveyor belt height: 1100 ? 30 mm | conveyor speed (dependent on product dimensions): 10 ?100 m/min | screen: 15 touch screen | software: intellisens?X-ray | operating temperature: 5 ? 35 ?C | reject system: optionally available according to requirements | power: 220VAC, 50/60Hz | dimensions of the system: : L3500xW1300xH1795 mm | weight: 700 kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell ...
grinding length: 800 mm grinding width: 400 mm workpiece height: 375 mm Control: Siemens 840 D total power requirement: 18 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 05394 Specifications: - BIA tested sweat extraction device - Joint extraction arm 3000 mm - Air volume flow approx. 1000 m³/h - max. static pressure 2700 pa - Filter area approx. m² - Filter control - light for filter change - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW - Space requirement approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg
Transnorm Rising falling Incline with arch belt conveyor GF 6000+800-700-600 RA2181 Technical data: Conveyor length (NL): 6800 mm (6000 mm incline + 800 mm arch) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DRS71M4BE1/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed controll Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 6800 ( 6000 + 800 ) Nominal / outside width ...
For the automatic powder plant, conveys powder coating up to 20m in an even and 8kg quantity PDF with all details available, see also powceq com
Technical data of the pallet rack stand: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack stand, used Material colour: Ral 5015 blue Frame profile: PLFB 13 Profile dimensions: P 85 x 65 x 2.0 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 3,300 mm Depth: 800 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Manufacturer: Arburg Model: ALLROUNDER 1200T 800 – 150 (Vertical) Year of Manufacture: 2006 Technical Specifications: - Weight: 7400 kg - Clamping Force: 800 kN - Operating Voltage: 400 V / 3 Phase / 50 Hz - Heating Capacity: 9.4 kW - Pump Motor: 1 × 18.5 kW - Total Connected Load: 27.9 kW - Operating Hours: 86249 (automatic operation) - Tie Bar Distance: 1200 mm - Clamping Force: 800 kN - Screw Diameter: 25 mm - Max. Part Weight (PS): 45 g - Core Pull: Yes (1 unit) - Orientation: Vertical - Number of Components: 1 - Drive Type: Hydraulic - Robot There is an issue with the monitor. Monitor board needs replacement. Find more here - .ucymachines/ Contact us at - sales@ucymachines
(showroom machine) Main Technical Data Number of Spindles: 4 spindles Gundrilling Diameter Range: 4 - 20mm Working Method of Tool: Rotating Working Method of workpiece: Rotating Clamping Method: Clamping Cone Max. Drilling Depth: 800mm Workpiece Max.Outer Diameter: 300mm Drilling Feedrate: 1-180mm/min Spindle Center Height: 220mm Spindle Distance: 158.75mm Control System: SIEMENS 828Dsl A.C. Spindle Motor Power: 2×15 kW Spindle Speed (Infinitely Variable): Max.5000 RPM Tailstock Spindle Speed: 70rpm Rapid Traverse Speed: 6000mm/min High Pressure Pump Motor Power: 4×7.5 kW Coolant Flow Rate: 4×46 L/min Filter accuracy: 20µm Max.Coolant Pressure: 100 bar Oil Tank: 1200L Weight of Machine: 10000 Kg. Electrical Supply: ...
x-travel: 800 mm y-travel: 500 mm z-travel: 500 mm control: Siemens total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 89 x 50 mm Truss Type: SLO 089 | 2 Agraffe: 5 HK Clear width: 1,445 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 89 x 50 mm Truss type: SLO 089|2 Agraffe: 5 HK Clear width: 1,140 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Bridge punch from Sandt with 30t
Atom cart beam punch with 25t. The machine is fully functional.
Name: Hydraulic Power Unit with Electric Motor and Oil Tank Manufacturer: HYDAC (engine by Elprom S.R.L.) Type: 80C4 3030923 Short Description: Compact hydraulic power unit consisting of an electric motor from Elprom (type 80C4), mounted on a HYDAC oil tank with integrated hydraulic block. Suitable for hydraulic applications in machine tools or industrial plants. Power: 1.1-1.3 kW at 230/400 V, 50 Hz. IP54 rating.
A screen printing system including a feed table with XY adjustment is available. Printing area: 800mm/500mm, max. print object height: 160mm, max. frame dimensions X/Y/Z: 1290mm/760mm/40mm, max. printing speed: 500 prints/h, machine dimensions X/Y/Z: approx. 1700mm/1100mm/2000mm, weight: approx. 450kg. Documentation available. An on-site inspection is possible.
3,800 liter rinsing milk tank/storage tank made of V2A Characteristics: volume 3800 L material V2A (AISI 304) 1.4301 Total height 2400 mm Cylinder height 1100 mm inner diameter 1850 mm Outside surface marbled Surface inside 2B=IIIC ground Design Vertical Number of feet 3 Description: MJ UNI-HIGH Topsoil: Flat floor with 3% slope threaded connector CIP ball Manhole Ø 540 mm vent nozzle Tank cylinder: 2 x Step Arches 2 x Disc Valve Underbody: Cone bottom drawn from outside to inside Residual Drain Pipe 3 solid feet
Manufacturer: Kraintek Model: HX360-W2/OT/LT+VT1/800x1150x850 Year of Manufacture: 2020 Commissioned on 01.11.2020, and was decommissioned in 2022 Technical Specifications: - Overall Dimensions: - Length: 8277 mm - Width: 11,640 mm - Height: 3450 mm - Machine Weight: 15,000 kg - Basket (container) Dimensions: - External: 470 × 850 × 310 mm - Max Load Capacity: 70 kg - Electrical Requirements: - Power Supply: 3-phase + PE, 50 Hz, 400/230 V, TN-S - Max Power Input: 260 kW - Operating Power: 171 kW - Control Voltage: 24 V - Distribution Box Protection: IP55 - Air Pressure Requirement: 0.4 – 0.6 MPa - Steam Extraction: Connect to central exhaust line - Safety Standards: - STN EN 60204-1: 2007-06 - ČSN EN 60204-1 ed.2 Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: Kraintek Model: HX360-W3/LT1+VT1/800x1150x650 Year of Manufacture: 2020 Commissioned on 01.11.2020, and was decommissioned in 2022. Technical Specifications: - Overall Dimensions of the Machine: - Length: 8277 mm - Width: 11,640 mm - Height: 3450 mm - Machine Weight: 15,000 kg - Basket Dimensions: 470 × 850 × 310 mm - Maximum Basket Load: 70 kg - Electrical Data: - Power Supply: 3~N+PE, 50 Hz, 400/230 V, TN-S - Maximum Power Consumption: 260 kW - Control Voltage: 24 V - Current: 396 A - Protection (Electrical Cabinet): IP55 - Compressed Air Connection: 0.4 – 0.6 MPa - Steam Exhaust: Connect to central steam exhaust system - Compliance Standards: - STN EN 60204-1: 2007-06 - ČSN EN 60204-1 ed.2 Find more here - .ucymachines/ Contact us at - sales@ucymachines
This 5-axis POSmill H 800 U was manufactured in 2018. It features an impressive X-axis travel of 670 mm, Y-axis travel of 830 mm, and Z-axis travel of 600 mm. The machine includes a robust table diameter of 800 mm and a high spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the POSmill H 800 U vertical machining centre we have for sale. Contact us for further details.
Offered for sale is a conveyor dryer with conveyor belt for screen printing applications. Equipped with enclosed drying tunnel, conveyor belt and connected exhaust ducting. Inspection possible by arrangement.
maximum number of results exceeded
please refine your search
