t slot used for sale

range L-W-H: 960 x 460 x 860 mm weight: 75 kg : 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4 inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8 inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2 inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm  ...

Inv. Num. : 9027 Type: SE 520 - 1000 Producer: TRENS Created: 2017 Parameters: Control system: SIEMENS Sinumerik 840D Max. turning length: 1000 mm Maximum turning diameter: 520 mm Equipment: 3x bezel 15x quick-release bracket

Table milling machine - swivel spindle milling machine Manufacturer: Holzkraft Model: Tecnomax T50 Year of Make: 2007 Spindle swivel Feed unit Manufacturer: Maggi Model: Steff 2034

Zwick / Roell temperature chamber for AllroundLine Type: TEE160/LN2 40S The TEE160/LN2 40S RS Simulators model is a specialized temperature control chamber that was developed primarily for material testing in combination with ZwickRoell testing machines (especially the AllroundLine) Flexible in use ZwickRoell's innovative temperature control chamber guarantees a flexible testing system tailored to customer needs without compromise. This guarantees reliable test results in the future.  The safety door function guarantees the protection of the operator in accordance with European safety regulations. The chamber door serves as a protective door with a tumbler. Accurate temperature control The temperature chamber creates extremely homogeneous and precise conditions for the test specimens in the entire chamber volume.  The test results are therefore accurate and repeatab ...

High speed model with SPLIT ROLL high low pile patterning device, working width: 5180mm, needle gauge: 1/8 inch, 1632 (2x 816). Equipment: adjustable needle stroke eccentric and needle stroke adjustment lever with counterweights, prepared in side drive frames, easily accessible at working height, pile height adjustment range 5-16mm, table height adjustment (machine bed) with hydraulically controlled table lock via ENCORE PC memory programmable controller, looper stroke and knife stroke eccentrics with counterweights, 2 needle bars with individual needles, 2 looper bars with Cut Loop individual loopers, 2 knife bars with Tuftco knife blocks, 8 knives per block, individually replaceable, reed plates for front and rear needle bar, ENCORE PC memory programmable controller for controlled stitch density and controlled backing tension, main shaft designed as a hollow shaft with integrated pump  ...

This 7-axis Quick-Tech I-42U was manufactured in 2015. It features a maximum bar diameter of 42 mm and a maximum machining length of 250 mm. The machine is equipped with a powerful spindle speed of 6000 rpm and includes an automatic bar feeder. If you are looking to get high-quality turning capabilities, consider the Quick-Tech I-42U swiss type turning machine we have for sale. Contact us for further details.

An electric reach truck Toyota (BT) is available. Rated capacity: 2500kg, load center: 600mm, lift height: 8000mm, free lift: 2757mm, max. travel speed: 12km/h, gradeability with/without load: 12%/7%, wheelbase: 1600mm. Machine dimensions X/Y/Z: approx. 3200mm/1300mm/3350mm, weight: approx. 5000kg, operating hours: approx. 5438h. The battery of the machine was replaced in 2016. Documentation available. An on-site inspection is possible.

Tray packer KETTNER without OVEN 4x6 packs 0.5 l on a tray

This 7-axis TRAUB TNL 32 P was manufactured in 2012. It features a maximum bar diameter of 32 mm and a maximum Z-axis travel of 305 mm. The machine includes two turrets with live tooling capabilities, offering 10 and 9 tool stations respectively. If you are looking to get high-quality turning capabilities, consider the TRAUB TNL 32 P swiss type turning machine we have for sale. Contact us for further details.

This 5-axis SACHMAN TS10 bed type milling machine is manufactured in 2026 and brand new. It features an impressive X-axis travel of 2,500 mm, Y-axis travel of 1,210 mm, and Z-axis travel of 1,200 mm. The machine includes a robust table size of 2,700 x 800 mm and a maximum table load capacity of 3,000 kg. If you are looking to get high-quality milling capabilities, consider the SACHMAN TS10 machine we have for sale. Contact us for further details.

TRAUB TNS 65 D / 5 - Axis CNC Lathe -For complete technical data, see data sheets -Control TX8 D -Built in 1994 -Rod passage 65 mm -Hydraulic bar loading magazine -Various driven tool holders -Tool holder -Three-jaw chuck -Complete documentation Hebkn Auovug Uls S Tel

CNC Lathe Tongtai Topper TNL - 100 TL / Fanuc OT -CE marking -Fanuc OT control -Max. turning diameter 388mm -Max. turning length 580mm -Rod passage 51mm -Hollow spindle diameter 62mm -Speed 45 - 4500 rpm -Turret / 12 stations -Tool -Eye / Tool Measurement -Tool shank 25mm - Holder diameter 32mm - Axis movement X/Z 200 & 600mm -Rapid traverse X/Z axis 20 & 24 m/min -Spindle motor 15 KW -Tailstock -Footswitch -Machine feet -Chip conveyor -Documentation Dimensions: LxWxH 2.6x1.8x2 meters / Weight 4700Kg

Tube cutting machine manufactured in 2021. This HSG HS-TL220 features a powerful 3000 W fiber laser and a maximum no-load speed of 110 m/min. It is capable of processing round tubes with diameters ranging from Ø20 to 210 mm and square tubes from 20 × 20 mm to 150 × 150 mm. If you are looking to get high-quality tube cutting capabilities, consider the HSG HS-TL220 machine we have for sale. Contact us for further details.

Double Shield Tunnel Boring Machine for hard rock Typ of TBM Hardrock Double Shield TBM Manufacturer Robbins / Herrenknecht Year of manufacture 2015, 2020 Boring diameter DME = 7.100 m Length 14 m Main drive power 7 x 330 kW = 2.310 kW Main trust force 33.780 kN @ 350 bar Stroke length 1.760 mm Installed power 4.800 kVA Weight ca. 770 t Find more here - .ucymachines/

vibratory feeder diameter range 10-20 mm shaft length under head 16-180 mm max. thread length 105 mm output pieces/min 100

diameter range 1,8 - 4,2 mm shaft length under head 32 - 105 mm thread length 27 - 75 mm output pieces/min 2500

diameter range 8-16 mm shaft length under head 12-160 mm max. thread length 100 mm output pieces/min 115

vibratory feeder diameter range 6-12 mm shaft length under head 170 mm max. thread length 102 mm output pieces/min 125

with washer assembly diameter range 10 mm shaft length under head 100 mm max. thread length 60 mm output - pieces/min 320

bushing cut-off , PKO diameter range 2-6 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 95 mm shaft length under head 75 mm output - pieces/min 80-200

This 10-axis CMZ TTL66 turn-mill centre was manufactured in 2025. It features a maximum swing diameter of 800 mm and a maximum turning diameter of 515 mm. The machine is equipped with twin spindles and twin Y-axis turrets, allowing for simultaneous 4-tool machining capability. If you are looking to get high-quality turning and milling capabilities, consider the CMZ TTL66 machine we have for sale. Contact us for further details regarding this machine.

turning diameter: 200 mm turning length: 393 mm control: MSX 853 weight of the machine ca.: 3,5 t total power requirement: kW dimensions of the machine ca.: m MSX 853 cnc control 3-jaw chuck diameter 210mm 12-fold revolver C-axis driven tools tail stock coolant device chip conveyor Technische Daten: / technical details Drehdurchmesser / turning diameter 200 mm Drehlänge / turning lenght 393 mm X-Weg / X-travel 160 mm Z-Weg / Z-travel 450 mm max. Drehzahl Spindel / max. spindle speed 50-3000 UpM /rpm Eilgang X/Z / rapid feed X/Z 24/30 Anzahl der Revolverplätze / number of tool places 12 max. Stangendurchmesser / max. bar diameter 51 mm Antriebsleistung Spindel / drive capacity spindle 13,5 kW Gewicht ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are n ...

A high-temperature water temperature control unit for injection molding tools, extrusion systems, die-casting tools and industrial temperature control processes up to 200°C is offered. Temperature range: 0°C to 200°C, circulating medium: water, heating capacity: 45kW, cooling capacity: 120kW, filling volume main unit: 32l, filling volume valve unit: 2l, weight: approx. 300kg, dimensions X/Y/Z: approx. 700mm/900mm/1900mm, weight of the valve unit: 37kg. Equipped with control via touch-screen visualization, separate control cabinet and external valve unit for high-temperature applications. Documentation available. Inspection possible by appointment.

Key data: 108 mm

Theysohn TTS 108-26/CON 40 with coexrurder 40 mm // 2011 year prod. // Control Panel TEC-2TS

Key data: 63 mm, 1750 1/min

double extruder Theysohn CON 63 with Coextruder CON 40 PCV // 2008 year prod. // Main Drive Power - 37 kW // Control Panel Colour TEC-2TS

Used Plastic - Tube Filling and Sealing Machine Manufacturer: TGM Type E250 MATIC Year of construction 2006 Capacity: 800 – 3,200 tubes / hour Tube height: 50 – 235 mm Diameter: Ø 10 mm – 50 mm Closure: Hot air device (HA) Tube Loading Station with Magazine, Tube Alignment, Presence Control Tube, Tube Centration, Filling Station, Hot Air Group, Tube Coding, Tube Cutting Station, tube output, Various format sets and spare parts

Witzig & Frank TriFlex 5XYear of manuf. : 2018 Control : Fanuc 30i-B ____________Description:In General:Year of construction:2018Control system:FanucProcessing stations:5 piecesLoading station:1 pieceTravelling range:X-axis:450 mmY-axis:500 mmZ-axis:450 mmRapid traverse X/Y/Z:50 m/minTurret:Number of stations:8Speed:13,300 rpmTorque:58 NmTool holder:HSK 63 CWorkpiece/device:Dimensions max.:350 x 350 x 350 mmMax. permissible mass:250 kgMedia supply line:6 piecesNC swivelling rotary table:A-axis:+/- 150°B-axis:360°Max. load:250 kgTable diameter:320 mmEquipment:Loading/unloading:Fanuc Robot M20i-AChip removal:2x chip conveyorsCoolant supply:IKZ system, 20 barPosition measuring systems:Direct in all axes

Aseptic carton filler previously used for the filling of aseptic milk products in cartons. The Tetra Pak Tetra Brik Aseptic 8 (TBA 8) carton filler is designed for 1.000 ml Square cartons. Controls: 100V. Drawing spec: 648022-1001. Production hours: 69.621 hours. The machine has been running in in a juice factory in Europe. Line dismantled in KW 13 - 2026 and is now located in the warehouse of Hamburg Machinery in Germany. Including reel lifter., Additional features:, 1x Drive gear is missing below the folding station. List with article numbers can be send on request., Type of Machine: Aseptic carton filler, Capacity (Units): 5.500 cartons per hour, Packaging: 1.000 ml Square, Product: Juices, Controls: 100 V, Conveyors: No, Accumulator: No, Cap Applicator: No, Card board packer: No, Working Hours: 69.621 h, Electric: 400/230 Volt - 50 Hz

Tensile and compression tester Manufacturer: Zwick Type Z2.5/TN1S Included Force transducer 2 kN Pneumatic Specimen Holder Pneumatic control unit testExpert testing software Upgrade Packet testExpert II Documentation Calibration certificates Documents available

This 3-axis KNUTH Turnado 280/1500 was manufactured in 2018. It features a distance between centers of 1,420 mm and a swing over bed of 560 mm. The machine is equipped with a spindle speed range of 25 – 1,600 rpm and includes a 3-axis Digital Readout (DRO) and a quick change tool post. If you are looking to get high-quality turning capabilities, consider the KNUTH Turnado 280/1500 horizontal turning machine we have for sale. Contact us for further details.

A horizontal glass tempering furnace is offered. Max. temperature: 750°C, heating zones: 10, control system: PLC. Equipped with roller conveyor infeed and outfeed with ceramic rollers, high-pressure cooling blower, control cabinets, hydraulic power unit. Inspection possible by appointment.

Type: SCM160 - set van 4 vijzels met elk een hefvermogen van 16 ton - Hefslag: 2000 mm -Snelheid omhoog/omlaag: 230 mm/min - 3 kW vermogen per aansluiting - totaal vermogen: 24 kW Elke krik is uitgerust met een absolute encoder voor het detecteren van de hoogte, rotatie en diagnose- en veiligheidssensoren om belasting, versleten moeren en obstakels onder het aambeeld te detecteren. Elektrisch systeem met standaard aansluiting en computergestuurde bedieningseenheid, gemonteerd op een verrijdbare trolley.

Tornos CNC-controlled multi-spindle automatic lathe Type / Model: Torno Multi Deco 20.8 Condition: Used, very neat condition Machine hours: approx. 65724 h Technical data: Rod diameter 5-20 mm max. piece length (without counter-operation) 100 mm max. piece length (with counter-operation) 80 mm Spindle rotation speed up to 5000 rpm max. spindle power 15 kW max. bore/internal threading power 3.7 kW Number of numerical axis 22 Grooving carriage (axial) 2 Cross guide carriage (radial + axial) 5 Long slide 7 Parting Carriage 1 Sub-spindle motor power 1.1 kW Dimensions (LxWxH) approx. 5880 x 1400 x 1950 mm Weight approx. 7200 kg Costs for delivery by freight forwarder free curbside see shopping cart or for inquiry items in the individual offer.

Tornos 8-spindle automatic bar machine mechanically controlled Type / Model: Tornos B20 Condition: Used Year of Make: 1981 Technical data Max. rod diameter around 20 mm Max. bar diameter square 15mm Max. rod diameter hexagon 19 mm Max. machining length (bar feed) 60mm Number of spindle 8 multi-spindle Spindle speed 20 steps from 620 to max. 6,035 1/min Number of cross slides 8 (one per spindle) Production management Max. up to 50 parts per minute Dimensions (LxWxH) approx. 2465 mm x 1200 mm x 1700 mm Weight approx. 5,900 kg

Tornos CNC-controlled multi-spindle machine Type / Model: Tornos MultiDeco 20.6 Condition: used Hours: 45300 h Rods Ø 5-22 mm Max. piece length without counter operation 100 mm Max. piece length with counter operation 80 mm Spindle rotation speed up to 4000 rpm Max. spindle power 15 [kW] max. bore/internal threading power 3.7 [kW] Sub-spindle motor power 1.1 [kW] Number of numerical axes 17 Axial slides 5 Cross guide carriage (radial and axial) 5 (pos. 1 to 5) Parting Carriage 1 CNC-controlled counter-operation guide carriage with up to two back-processing tools (item 7) Connected load 35 kW Dimensions (LxWxH) approx. 8053 mm x 1508 mm x 2210 mm Weight approx. 8500 kg

Automatic motor spindle lathe: Tornos Type / Model: MultiAlpha 8x20 Condition: used Year of Make: 2008 Machine hours: 45017 h Technical data Capacities & Travel Distances Bar passage (round material) up to max. 22 mm (with turned rods up to max. 25 mm) Workpiece length max. 100 mm Longitudinal travel (Z-axis) 80 mm Cross slide path (X-axis) 50 mm End units (longitudinal slide) 200 mm Spindle & Axes Main spindle 8 independently driven motor spindles Sub-spindle one sub-spindle, with max. 5 machining tools and max. 3 driven machining operations possible Total axles 34 axles Tool slide 7 Cross slide X/Y (position 1 - 7) 1 parting carriage X (position 8) 7 longitudinal slides (positions 1- 7) Drive power & speeds Main spindle speed 0 - 8,000 1/min Power main spindle motor 11.2 kW Torque main spindle 17Nm (optionally up to 25 Nm) Speed of sub-spindle max. 8,000 1/ ...

1.Industrial filter housing tank Material S/S304 Capacity (bag) 7 dia x 32'' L Total Higher of Machine:905 mm Inlet pipe position for service Side of tank Conection In/Out 2'' Flange Max.operating pressure (bar) 10 Max. operating tempature (๐C) 100 Flowrate :45 m3/hr Vent 1/4'' Clean Drain 2'' Shell O - Ring EPDM Pressure gauge 2.5", 1 unit 2. Filter bag Nylon NY-250 Micron/ Collar:SS ring Size 7" x 32" (2 units/tank) For latex online filtration project SF13 Location: F8A Thailand PIC 1.Ms.Warisara S E-mail : warisaratopglove.co.th

Two used Oil transformers TRANSFIX aluminium winding ,ONAN cooling. 1250 kva 20000 Volt/ 20KV. Years of construction 1999 in Excellent condition. Always available, Price for both two 11,000€ . For more information please contact us .

EREMA 1109 TVE PLUS, Complete regranulation line for LDPE LLDPE HDPE PP PS, Throughput rate 400-500 kg /h depending on materials, Including:, loading conveyor belt, tunnel metal detector, compacting unit, extruder with 90 mm.screw Ø, double piston, backflush screen-changer, double degassing unit,, water ring pelletizer, stainless steel centrifugal dryer, closed cycle water flow, electric cabinet for full management, 44.500 worked hours, in production, Users manuals, CE compliance declaration, Electrical drawings available, capacity: 400-500 kg/h depending on materials, conditions: very good conditions - now disconnected , type: compact line from scraps to granule, highlighting: The Erema lines are particularly appreciated for the high efficiency production/consumption and for the screening which happens before degassing.

Horizontal turning machine manufactured in 2007. This Mazak QUICK TURN NEXUS 200-II features a maximum turning diameter of Ø 350 mm and a turning length of 550 mm. It is equipped with a chuck size of 200 mm and a maximum spindle speed of 5,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak QUICK TURN NEXUS 200-II machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2012. This Mazak Quick Turn Smart 200 features a 12-position turret and is equipped with a Hainbuch chuck, enhancing its versatility. It has a bar capacity of 65 mm, making it suitable for various turning applications. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Smart 200 machine we have for sale. Contact us for further details.

very good condition

very good condition

Stainless steel tanks Manufacturer: Becker Tankbau Capacity 14.250 litres Cylindrical stainless steel container, single-walled, no agitator Diameter 2.40 m, total height approx. 4.10 m

Stainless steel tanks Manufacturer: Becker Tankbau Capacity 14.250 litres Cylindrical stainless steel tank, lower third with double jacket for heating and cooling, upper part single-walled, no agitator Product space: pressureless, operating temperature 30 °C Boiler room: 1 bar, operating temperature 50 C Diameter 2.40 m, total height approx. 4.10 m

Stainless steel tanks Manufacturer: Becker Tankbau Capacity 14.250 litres Cylindrical stainless steel tank, lower third with double jacket for heating and cooling, upper part single-walled, no agitator Product space: pressureless, operating temperature 30 °C Boiler room: 1 bar, operating temperature 50 C Diameter 2.40 m, total height approx. 4.10 m

Hotung LK-PW1 Pile Turner - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Hotung LK-PW1 Pile Turner Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Hotung LK-PW1 Pile Turner Price: 7000 EUR Download PDF Hotung LK-PW1 Paper Pallet Turner, B1+ Format The machine is like new, fully functional, and ready to use. Technical Specifications: Format: 1280×800 mm Stack height: max. 1340 mm Load capacity: 1000 kg Device weight: 860 kg 380V power supply Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, space-saving. Ask About The Product Name (required) Company name Em ...

Polar Mohr PW-1 Pile turner - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Polar Mohr PW-1 Pile turner Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Polar Mohr PW-1 Pile turner Price: 6250 EUR Download PDF Polar Mohr PW-1 Pile turner This machine is like new, fully functional, and ready to use. Technical specifications: Format: 660x800mm Stack height: 1250mm Load capacity: 500kg Device weight: 700kg Power supply: 380V Controlled from a control panel, fast operation, hydraulic drive. Noiseless operation. Compact design, space-saving. Ask About The Product Name (required) Company name Em ...

Baumann BSW 2-500 pile turner - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Baumann BSW 2-500 pile turner Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Baumann BSW 2-500 pile turner Price: 6000 EUR Download PDF Baumann BSW 2-500 pile turner The device is fully operational and ready to work. Technical data: Format 550x750mm Stack height 1200mm Load capacity 500 kg The weight of the device is 700 kg Power supply 380V Control from the desktop, fast work, hydraulic drive. The machine is designed to be easily moved using a pallet truck. Compact design, takes up little space. Ask About The  ...

Inv. Num. : 9289 Type: Tandem 400 Producer: FAMAR Created: 2013 Parameters: Table diameter: 480 mm Max. workpiece diameter: 400 mm Max. length of the workpiece: 300 mm Number of Spindles: 2