t slot table used for sale

Transformer station with precast concrete building L = 5.50m, B = 3.00m, H = 1.00m + 2.70m - Three-phase cast resin transformer - Low-voltage distributors - Undermeasurement - Mains protection component

Machine Details Stock-No. 1105-03856 Type of machine CNC Lathe Make COLCHESTER Type TORNADO T 6M Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Great Britain Delivery time immediately Freight basis EX WORK Technical details turning diameter 440 mm turning length 450 mm control FANUC 21 ITB total power requirement 15 kW Weight of the machine approx. 4 t Additional information NICE COLCHESTER T 6M FROM 2006 FANUC 21 ITB CUCK TAILSTOCK SWARF CONVEYOR VDI 30 TURRET 12 P LIVE TOOLS BARFEEDER MBF 1000 INCLUD

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...

A rotational shear viscometer according to Mooney for performing Viscosity tests (ML / MS 1+X), Stress Relaxation testing, Mooney Scorch, Delta Mooney testing on polymers as well as rubber compounds for quality control, research and development applications.

Automatic hardness testing device with 4 heads Micro IRHD IRHD Type L IRHD Type N IRHD Type H The device needs gibitre software installed on the computer to work. The device consists of a stand and 4 heads

Automatic hardness testing device with 3 heads Shore 00 Shore A Shore D The device needs gibitre software installed on the computer to work. The device consists of a stand and 3 heads

Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bardiameter: 5 - 42 mm Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg

continuous grilling line all stainless steel with lower and upper belt : bottom and top heating temperature of the belts is separately adjustable nett length 1800 mm belt width 600 mm electrically heated 93 kW belt washing system temperature from 50 up to 260°C grilling time 0,3 – 3 m/min adjustable speed

Sharpening machine for band saw blades Manafacture: Alber Sharpening machine for band saw blades Sharpening circuit Fabr. Alber Model: TB1 - AE2 Year of construction: 1978

Turbovac TV5575 Dip tank Serial: 20151529 2015, stainless dip tank, shrink tank, platform dimensions 730mm x 535mm, dipping length 300mm, max product height 250mm, max water capacity 130l, max product weight 30Kgs, adjustable temp control, exhaust hood, with outfeed conveyor, mobile, 3Ph

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 190 mm -Admission recess: Ø 160 mm -Passage: Ø 56 mm -Weight: 10 kg

90m Trapezoidal threaded spindle, steel, warehouse liquidation, TR30x6 bis TR10x3, , new -75% Single-start, rolled threaded spindles with trapezoidal thread according to DIN 103, in material C35/C45, in many sizes between TR10x3 to TR30x6. Special price These threaded spindles come from a stock liquidation, therefore we offer a bundle with spindles for an absolute special price. The current purchase price of these threaded spindles is € 2354 excl. VAT Our selling price is only 25% that is € 588 excl. VAT Attention: The photos do not correspond to the indicated quantity Scope of delivery: appr 180kg TR30x6 right: 3x780mm TR28x5 right: 1x1940mm, 1x1180mm TR26x5 right: 6x950mm, 1x850mm, TR26x5 left: 1x1900mm, 3x1000mm, TR24x5 right: 2x1570mm, 1x1700mm, 2x840mm, TR24x5 left: 2x2000mm, 1x1120mm, 1x840mm, TR22x5 right: 1x2000mm, 1x790mm TR20x4 right: 1x2000mm, 1x ...

Roller bench Material thickness 1 mm Usable length 1,275 m Weight 200 kg

Folding bench TEKO Sheet thickness 1.9 mm Usable length 2025 mm Length 2500 mm Width 650 mm Height 1080 mm Weight 500 kg

Clamping claw box made of solid steel GR 9 (new) 4 pieces

537 KW Tuthill Nadrowski back-pressure steam turbine C4. S-GIII from 2004, only turbine (was used as a pump). 1 available inlet pressure 90 bar, outlet pressure 18 bar, Price: € 19,500 each, plus VAT and FCA-free Manufacturer: TUTHILL Nadrowski Model: C4. S-G III Type: Steam Back Pressure Serial Number: 21004 Power [kW]: 537 Pressure inlet [bar]: 90 Pressure outlet [bar]: 18 Speed (rpm) 3.554 Year of construction: 2004 Weight [kg]: 2.440 Dimensions LxWxH [cm]: 370x138x174

Weibert WJ-FS-41 Top Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min Professional dressing stop Motor 5.5kW 400V Numerical display of planing height planed dressing and thickness tables Spiral planer knife shaft WJ-300200

SPINNER TTC 300- 52 SMMCY CNC Lathe YOM 2012 Twin-opposed-spindle, twin-turret lathe Control FANUC 31iT Swing diameter 400 mm Max. turning dia ~200-250 mm Max. turning length 400 mm Travels: X1 180 mm, X2 110 mm, Z 450 mm, Y +40/-40 mm Rapid traverse: X1 15 m/min, X2 15 m/min, Z 24 m/min, Y 15 m/min With C-axis Main Spindle 1: Motor spindle with water cooling With hollow shaft measuring system for C-axis drive mounted directly on the spindle shaft Spindle bore 52 mm Spindle speed 0-5000 rpm/ 19 kW Performance Pmax 23,5 kW Torque 150 Nm Spindle nose A6/DIN Sub-Spindle 2: Motor spindle with water cooling With hollow shaft measuring system for C-axis drive mounted directly on the spindle shaft Can be moved on a slide to take over spindle 1 Spindle speed 0-7000 rpm/ 8 kW Performance Pmax 13,8 kW Torque 189 Nm Spindle nose 100 mm Turret 1: At the top of the ...

FOLIANT Taurus 760 SF Industrial Laminating Machine year 2017 Max sheet size : 760 x 1150 mm Min sheet size : 320 x 250 mm Max speed : 30 m/min Paper weight : 115 - 600 gsm Temp control : 80 - 140 C Lamination films : BOPP 23 - 42 microns , max nylon film max 35 microns, PET film max 25 microns - Pallet Feeder - Touch screen controls - PLC controlled overlaps - Almost 8 minute warm up time - Film air shaft - Integrated Bump separator - Pallet stacker

Cantilever racks SPECIFICATIONS Mast height: 4000 mm (blue) Truss length: 1200 mm or 1200+1200 mm (orange) Item 1 05 Supports 10 trusses Grid/round POSTS 2 07 Supports 14 trusses Grid/round Item 3 11 Double-sided supports (re-li) 44 trusses Grid/round Base 2600 x 30 x 30 mm Item 4 17 double-sided supports (re-li) 68 trusses Crossbars Base 2600 x 30 x 30 mm

Single screw Extruder Theysohn 63mm

HAISHU CNC550T 4-axis CNC Lathe Producer- Taian HAISHU Machinery Co. Ltd YOM 2015 Condition- Never used Equipped with two spindle and an additional lower turret with 12 tools, providing automatic two-way processing of the workpiece in the achievement of maximum processing speed. Control CNC GSK988TD Additional Y axis Max. working length 750 mm Maximum turning diameter over bed 550 mm Maximum turning diameter pallet 500 mm Spindle type А12 Hydraulic Jaws: 2x 300 mm Front spindle bore taper 1:20 Spindle pass 75 mm Speed of Servo spindled 0-4000 mm/min Axis X/Z/B Quick moves 40 000 mm/min CS1, CS2 power of main motors: 15 kW Engine motor on axle C- 5.5 kW Moment by Axis X/Z: 15 Nm Movement on Y axis: + 55/-55 mm; Moment on axis B: 20 N. m; Time to change tool 1.6 sec Positioning accuracy 0.005 mm Moves on axes X1/X2- 350 mm Moves on axes Z1/Z2- 1100/1350/1850 mm ...

Farm petrol station - company petrol station - diesel petrol station composed of: 1 x 16 qbm steel tank - brand new 1 x Nozzle type K-80 - brand new Description of storage containers: 16,000 litres capacity according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 8.50 m - D = 1.60 m - weight approx. 3.5 tons. - ex works, fre ...

Tapping chucks, thread chucks, tapping chucks, tapping attachments -with: slip clutch -Integrated reverse gear with: fast reverse -Thread sizes: M5-M18 -Recording: MK3 -Dimensions: 380/95 mm -Weight: 2.6 kg

HOFMANN swivel spindle milling machine TFS 1200 Year of manufacture: 2004 S/N 127-01323 Manufacturer: Hofmann Bad Windsheim from a training company very good condition electric height and swivel adjustment manual height and swivel adjustment for fine adjustment analogue display for height adjustment, height adjustment 125mm Table size 1200 x 820mm and table extension 200 x 820mm Swivel range -5° to + 45 Spindle speed 3000/4000/5000/6000/8000/10000 rpm. Milling spindle D=30mm milling mandrel MK5 Engine 4.7 Kw / 6.3 hp Suction nozzle D=120 mm Side roller table with eccentric hold-down device and adjustable angle stop Height adjustable with handwheel CE mark Weight 1300 kg

Sputter target, tube, pipe -Pipe dimensions: Outer: Ø 152 mm Inner: Ø 125 mm Total length: 3249 mm -Number: 2 pipes available -Price: Complete -incl. transport crate -Box dimensions: 3600/570/H585 mm -Weight: 306 kg

Mooney Viscometer Make: Alpha Technologies Model MV 2000 Rotational Speed 0.1 to 10 rpm, temperature Range ambient to 200C, torque Range 0.01 to 200 MU, rotors large: 38.10 mm D, small: 30.48 mm D.

MAX CAPASITY 20 T

Hardness tester Wolpert Testor HT 2001 Year of manufacture 1979 Hardness testing Rockwell Brinell Vickers Weight 185 kg Data Adjustment tool Unchecked!

Thermostat, sensor -Number: 250 V 10 A/24 V = 2 A -2.0 K: 20-110 °C -2.5 K: 20-150 °C -5.0 K: 20-230 °C -Dimensions: 140/80/H270 mm -Weight: 1 kg

Screen width: 800 mm Screen length: 5700 mm Incl.: Control unit - without control cabinet Mixing station Pump New sieve band Spares Subject to prior sale - errors possible Ref. No.: F-1162

Posiweigh Triple200 Three lane linear weighing line Serial: 3054 2015, never been in production, weighing capacity up to 1000grams, suitable for dry, free flowing granular or piece type products, hopper capacity 120l, weighpan capacity 5l, two different discharge chutes for single drop of treble drop, comes with vibratory conveyor with 500kg hopper then feeds onto flighted elevator conveyor that feeds into the linear weigher and finally discharges onto a 3m indexing conveyor, supplied with a set of stainless steps, 1Ph

Tool holder for TR 20 mounts -made from: Polypropylene copolymer -Impact and scratch resistant, heat resistant -resistant to: mineral oil and various chemicals -Price/Sale: complete -Weight: 1 kg

THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) M. No.: 403 Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Ven ...

Knives for A750 - TREIF PUMA S Article number Treif - 58114 / 846000 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

Manufacturer: TREIF Type: PUMA CE 700 EB Product holder with 45 catchers / teeth / for PUMA CE 700 EB, Art. No. 124777 Dimensions: L 180 x W 185 mm Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

knife for slicer TREIF type TA 108 Article number Treif : 13844 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

3 pieces Teflon knife for slicer TREIF type PUMA CE 700 EB Article number Treif : 244755 = 83581 - ID 16391, 12153,11695 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

suitable for nitrogen all stainless steel belt width ± 600 mm nett belt length ± 6.000 mm dimensions (l x w x h) : ± 7.600 x 1.500 x 2.300 mm

Offer 20142 Specifications: - Tapping capacity up to approx. M 16 - Tapping depth approx. 75 mm - Drill feed Ab + Auf infinitely variable - Projection 90 mm - Spindle speeds up to 290 rpm - Pneumatic connection with pressure reducer 6 bar - Pneumatic foot switch - Drive 400 V / 0.75 kW - Space requirement approx. W 700 x H 2250 x D 800 mm - Weight approx. 150 kg

end mill, end mill, milling cutter -Condition: Like new -Diameter: 50 mm -Working height: 100 mm -carbide-tipped -Recording: SK50

CNC Vertical Lathe PIETRO CARNAGHI Model AP 140 TMY Year: 2013 Never used Table Diameter: 10000mm Max. swing: 14000mm Max. loading on table: 500t Max RPM: 0.2-35 Turning height: up to 8900mm CNC Siemens 840D Ram size: 600x600mm Ram stroke: 4000mm Milling head power: 100kW Machine is packed in containers and ready for shipment. The machine was assembled by manufacturer, tested, disassembled and shipped to the buyer. And was never installed after that.

-the baking surface: widht is 210cm height is 22cm length is 2100cm, -oven ext. dimension aprox is 300 x 2100 cm - PLC controler - stanless steel plating -steam device -dismantled

Key data: 530 mm

KELCH KALI-tec A tool presetter built in Germany in 2004 is a high-tech device for accurate measuring, presetting and simultaneous tool shrinking. The state-of-the-art KELCH tool presetter with integrated induction coil is offered with equipment that includes e.g. the electronic measuring system with intelligent image processing KELCH EasyVision and the KELCH Easy Webset computer software for tool measurement and inspection. The tool length is determined by the setting adapters before the chuck heating phase. The KALI-tec A tool measuring and presetting machine then automatically sets the tool exactly to the target length during the chuck opening phase by heating, while for more complex measuring tasks or tools made of high-speed steel the KELCH i-tec shrink-fit device shrinks the tool to the target length using intelligent calculations and pre-positioning of the setting pins. Tech ...

Device tester, power supply -For: 15 V devices -Measuring range -Measuring current: max. A. -Dimensions: 233/225/H160 mm -Weight: 1.9 kg

Lathe TOS SUI 40-50 Center width 1500 mm Circulation over machine bed 500 mm Circulation over support 320 mm Spindle speed 14 to 2240 rpm Quick Release - Steel Bracket § Jaw wedge bar chuck Machine is ready for operation and in good condition

Ref. -No.: 10372 Manufacturer: STAMA Year of construction: 2021 Type of control: CNC Control: SINUMERIK Siemens 840 D sl Storage location: Halberstadt Country of origin: Switzerland Turning Speeds: 4200 RPM X-axis travel: 615 mm Y-axis travel: 290 mm Z-axis travel: 500 mm Number of tools in the chain magazine: 64 Max. Rapid traverse: 65 m / min Max. Feed force: 4000 N Acceleration (X): 7 m/s² Acceleration (Y): 9 m/s² Acceleration (Z): 13 m/s² Further information: - Ball screw - Automation - Workpiece loading/unloading chuck parts with X- / Z- gantry loader - Clamping pressure preselection 15 - 50 bar for both spindles - Buffer station for constant short chip-to-chip times - NCU High Performance NCU 730.3.m - Magnetic gripper

8 Sulzer TPS Terry Looms 360cm Year 2000 8 Colours 16 Frames 20 Levers 1.25 Beams 1 Cloth roll 2 Weft feeders on the loom (total 29 pcs for 8 looms) Staubli dobby 2668 Heald wires and droppers 5000 Total number of beams are 20 for 8 machines

Signal pillars, signal lights, signal lamp, control lamp -Manufacturer: Patlite -Type: LU7-02 -Dimensions: 70 x 340 mm -Weight: 0.7 kg

Signal towers, signal lights, signal lamp, signal tower, control lamp -Manufacturer: Telemecanique -XVB C21/ XVB C2B6 -Number: 4 pieces available -Price: per piece -Dimensions: 80 x 300 mm -Weight: 0.9 kg