We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
120,093 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Tschu-Tschu-Bahnen electric train, type: EH, number: W09HEF23260T08001, year of construction: 2003, 48 V, weight: 4000 kg, 3 cabins, 29 passenger seats, dimensions each cabin: (1x) 3800 mm x 2550 mm x 1600 mm, (1x) 4200 mm x 2550 mm x 1600 mm, (1x) 4200 mm x 2550 mm x 1600 mm, total dimensions: 14100 mm x 2550 mm x 1600 mm. Including Micomp light Lade Technik, battery charger, 48 V, 100 A, dimensions charger: 500 mm x 370 mm x 700 mm.
used
used
Tos HOV 25 Ø 500 mm Strokelength: 250 mm Table dia: 500 mm Longitudinal travel table X-axes: 560 mm Crosstravel table Y-axes: 450 mm Length : 2270 mm Depth : 1425 mm Weight: 2850 kg
used
MAX DIAMETER 550 MAX MODULE 6
used
MAX DIAM 550 MAX MODULE 6
used
MAX DIAM 500, MAX MODUL 8 , PLC , DRO
used
MAX DIAM 500, MAX MODUL 8 , MAX STROCE 125 , SINUMERIC 840 D
used
I offer those interested a used rotary table from the HP100 horizontal boring machine. The size of the table is 2200x2200 mm, weight 14,000 kg, rotation on a ruler + optically adjustable by 90°, linear measurement in the direction of table movement. Load capacity over 4,000 kg. Motor/manually controlled feed and rotation. Sliding guide in condition according to the photo. Fully functional. We are replacing it with a table with a rotary sensor. Available immediately. (it will be connected until 12/10/2022 and can be demonstrated)
used
T-slot Table 3500 x 2450 x 610 mm Thickness: 610 mm Length: 3500 mm Large: 2450 mm With (1) -- Without (2) nuts: 7 t-slots
used
T-slot Table 3050 x 1520 mm Length: 3050 mm Large: 1520 mm Weight: 10 ton With (1) -- Without (2) nuts: yes
used
T-slot Table 3150 x 2000 x 400 mm Thickness: 400 mm Length: 3150 mm Large: 2000 mm With (1) -- Without (2) nuts: 8 t-slots
used
T-slot Table 3050 x 1520 mm Length: 3050 mm Large: 1520 mm Weight: 10 ton With (1) -- Without (2) nuts: yes
used
T-slot Table 3050 x 1520 mm Length: 3050 mm Large: 1520 mm Weight: 10 ton With (1) -- Without (2) nuts: yes
used
T-slot Table 4000 x 2500 x 300 mm Thickness: 300 mm Length: 4000 mm Large: 2500 mm Weight: 12 ton With (1) -- Without (2) nuts: 10 t-slots
used
<br>With near head UNION SPECIAL Maximum sack length: 120 cm<br><br><br><br>Verf Gbar: now
used
Static distribution, model: CLASSICLON, feeding size: 4-5 mm, end product: up to 150 µm, capacity: approx. 30-40 t/h, ideal for producing filler sand
used
Dynamic separator, model: CLASSICLON, E-drive 11 kW, ideal for producing filler sand; less use
used
With stitching head UNION SPEZIAL Maximum sack length: 120 cm Available: now
used
used
Section floor area 0.61..0.68 1.6m width 3.10m length : 1.5m x 3.0m 700mm high one suction duct A area of application plasma 24 months warranty ; new
; ready for use
used
Spindle diameter: 0 mm Cross X: 0 mm Vertical Y: 0 mm Table length: 0 mm Table width: 0 mm Positions ATC: 0 Number of pallets: 0 CNC Brand: 0 CNC Model: 0 Technical data Longitudinal feeds: from: 10 mm/min up to: 1600 mm/min Transversal feeds: from: 10 mm/min up to: 1600 mm/min Taper in spindle: MT: 7 Way of the drill slide: 600 mm Drill spindle diameter: 180 mm Drill spindle travel: (Z) 1500 mm Spindle speeds: from: 3.15 rpm up to: 630 rpm Spindle feeds: from: 4 mm/min up to: 630 mm/min Rapid traverse:: 2.5 m/min Milling head:: Ø 260 mm Machine´s weight about: 53000 kg Overall dimensions machine: Length: 8500 mm Width: 5800 mm Height: 9200 mm Various accessories: Rotary table diameter: 2000x2000 Skoda E20 mm
used
Spindle diameter: 0 mm Cross X: 1250 mm Vertical Y: 900 mm Table length: 1120 mm Table width: 1000 mm Positions ATC: 0 Number of pallets: 0 CNC Brand: Heidenhain CNC Model: TNC 426 X – Travel: 1.250mm Y – Travel: 900mm Z – Travel: 630mm W – Travel: 1.000mm Table Length: 1.120mm Table Width: 1.000mm Table load: 3.000Kg Speeds / ranges: 1800Rpm Power: 30kW Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis:&nbs ...
used
Spindle diameter: 50 mm Cross X: 2000 mm Vertical Y: 1400 mm Table length: 1600 mm Table width: 1400 mm Positions ATC: 60 Number of pallets: 0 CNC Brand: Heidenhain CNC Model: TNC 415 MACH-id 6016 MAKE TOS Varnsdorf TYPE WHN 110 MC YOP 1996 SPECIFICATIONS X - Travel 2000 mm Y - Travel 1400 mm Z - Travel 1250 mm W - Travel 710 mm Table Length 1600 mm Table Width 1400 mm Table load 5000 Kg Speeds / ranges 1800-(2500?) Rpm Power   ...
used
Spindle diameter: 0 mm Cross X: 2000 mm Vertical Y: 1400 mm Table length: 1600 mm Table width: 1400 mm Positions ATC: 60 Number of pallets: 0 CNC Brand: Heidenhain CNC Model: TNC 415 MACH-id 5321 MAKE TOS Varnsdorf TYPE WHN 110 MC YOP 1996 SPECIFICATIONS X - Travel 2000 mm Y - Travel 1400 mm Z - Travel 1250 mm W - Travel 710 mm Table Length 1600 mm Table Width 1400 mm Table load 5000 Kg Speeds / ranges 1800-(2500?) Rpm Power &n ...
used
Spindle diameter: 100 mm Cross X: 1120 mm Vertical Y: 1250 mm Table length: 1250 mm Table width: 1250 mm Positions ATC: 0 Number of pallets: 0 MAKE TOS Varnsdorf TYPE H 100 A YEAR SPECIFICATIONS Controll Conventionel Floor or table type borer Table borer X - Travel 1120 mm Y - Travel 1250 mm Z - Travel 1250 mm W - Travel 900 mm Spindle Diameter Ø 100 mm Spindle Taper MK 6 Spindle speeds / ranges 900 Rpm Table Length x Width 1250 x 1250 mm Table load in kG 3000 Kg DIMENSIONS Length 6000 mm Width 3700 mm Height 3000 mm TOS Varnsdorf H100A Horizontal borer
used
Spindle diameter: 100 mm Cross X: 1250 mm Vertical Y: 900 mm Table length: 1120 mm Table width: 1000 mm Positions ATC: 0 Number of pallets: 0 CNC Brand: Siemens CNC Model: Sinumerik MAKE TOS Varnsdorf TYPE WH 10 CNC YEAR 80 er SPECIFICATIONS Controll Siemens Sinumrik Floor or table type borer Table borer X - Travel 1250 mm Y - Travel 900 mm Z - Travel 630 mm W - Travel 1000 mm Spindle Diameter Ø 100 mm Spindle Taper ISO 50 kW power on spindle 30 kW Spindle speeds / ranges 1300 Rpm Table Length x Width 1120 x 1000 mm Table load in kG 3000 Kg Number off controlled axis 4 DIMENSIONS Length 4500 mm Width 3800 ...
used
Spindle diameter: 130 mm Cross X: 5000 mm Vertical Y: 3000 mm Table length: 2500 mm Table width: 1800 mm Positions ATC: 0 Number of pallets: 0 CNC Brand: Heidenhain CNC Model: iTNC 530 Make TOS WHN13CNC Type WHN 13 CNC Year 2008 iTNC 530 in 5 Axis Spindle diameter (mm) 130/46/3000 Table length (mm)L = 2.500 Table width (mm)W = 1.800 Longitudinal X (mm)X = 5.000 Cross Y (mm)Y = 3.000 Pos ATCZ = 1.250 Number APC.W = 800 Load = 25 Ton Table index 0.001 Gr Coolant true spil 17 Bar Chip conveyor Spindle extensions Optional milling head HUR 50 Optional Milling head HOI 50
new
Section 0.61 .. 0.68 length of 1.6 m width 3.10 m length operating range: 1,5 m x 3,0 m 700mm high sided suction scope plasma 24 months warranty; new
new
Pharma Technology DV1300 +VC vertical tablet/capsule deduster, output 50,000 to 2,000,000 pieces/hour.
used
1 used Tischbohrwerk manufacturer: TOS Type: W75 1998. X-1250mm Y-900mm Z-1000mm W-560mm with 3-axis digital HEIDENHAIN Positip 855
used
Electronic Scissor Lift Fabr. TREPEL Type M-Boy 4Machine -No: 30706872, built in 1985Load capacity: 500 kgOperating pressure max.:160 barTable size: 710 x 600 mmHeight retracted: 470 mmMax. Extension height: 920 mmOperating pressure: 160 barDrive power: 1.1 kWExternal dimensions retracted: 650 x 900 x 470 mmPower connection: 380 V / 50 HzWith- Remote control with 3.0 m cable- freely installable limit switchvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Table drilling unit W 100 A Manufacturer: TOS Varnsdorf overhauled: 2019 Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 7-1120 rpm. Axis W ... 900mm Axis Z ... 1250mm ISO 50 Max table load ... 3000kg L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14000kg Main Engine Power... 11kW Total power demand ... 17kVA Clamping table area ... 1250 x 1250mm Flat disc diameter... 600mm Max circulation diameter ... 900mm The machine is possible to test under electricity, with one-year warranty.
used
spindle diameter: 100 mm x-travel: 1600 mm y-travel: 1120 mm z-travel: 1250 mm Table dimensions: 1250 x 1250 mm tool adaptor: MT 6 spindle turning speed range: 7,1 - 1120 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Outriggers Facing head D.R.O. Acurite ISO 50 adapter Spindle support The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 100 mm x-travel: 1250 mm y-travel: 900 mm z-travel: 1000 mm w-axis: 630 mm table load: 3 t Table dimensions: 1000x1120 mm voltage: 380 V taper ISO: 50 P.D.B. control: Heidenhain TNC 135 total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 90 mm x-travel: 1250 mm y-travel: 1200 mm Table dimensions: 1000 x 1120 mm w-axis: 700 mm tool adaptor: ISO 40 spindle turning speed range: 28 - 1400(x18) U/min z-travel: 1600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 90 mm x-travel: 1250 mm y-travel: 1120 mm z-travel: 1400 mm w-axis: 710 mm spindle turning speed range: 28 - 1400(x18) U/min tool adaptor: MT 5 Table dimensions: 1000 x 1120 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Facing head, 3 axis digital read out, spindle support and tailstock. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1500 mm z-travel: 1450 mm table surface area: 1400 x 1600 mm taper ISO: 50 spindle speed:: 2 - 2500 Control: TOSNUC 7-3 total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 100 mm x-travel: 1250 mm y-travel: 1100 mm z-travel: 950 mm Table load: 3000 kg table surface area: 1000x1120 mm turning speeds: 16-1250 U/min spindle taper ISO: 50 Control: Heidenhain total power requirement: kW weight of the machine ca.: 13,4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Table length: 3000 mm Table width: 800 mm Longitudinal X: 3000 mm Cross Y: 800 mm Vertical Z: 1000 mm Positions ATC: 0 CNC Brand: Heidenhain CNC Model: TNC 355 Make TosTypeFSS-8 Year 1991 Tos FSS 80 CNC bedmilling machine Table length (mm) 3000 Table width (mm) 800 Longitudinal X (mm) 3000 Cross Y (mm) 800 Vertical Z (mm)1000 630 mm CNC Rotary table Iso 50 Automatic head CNC Heidenhain TNC 355
used
Spindle diameter: 0 mm Cross X: 2000 mm Vertical Y: 1400 mm Table length: 1400 mm Table width: 1250 mm Positions ATC: 60 Number of pallets: 2 CNC Brand: Heidenhain CNC Model: TNC 415 Make TOS WHN11 Type WHN 110 MC Q Year 1994 TNC 415 in 5 Aixs Spindle diameter (mm)110/iso50/37kW Table length (mm)L = 1.400 Table width (mm)W = 1.250 Longitudinal X (mm)X = 2.000 Cross Y (mm)Y = 1.400 Pos ATCZ = 1.250 Number APC.W = 500 Spindle 2500 Rpm ATC chain 60 positionsPallet changer 2 x
used
Spindle diameter: 130 mm Cross X: 3500 mm Vertical Y: 2000 mm Table length: 2200 mm Table width: 1800 mm Positions ATC: 60 Number of pallets: 0 CNC Brand: Heidenhain CNC Model: TNC 430 Make TOS WHQ13 CNC Type WHQ 13 CNC Year 2004 TNC 430 in 5 Axis Spindle diameter (mm) 130/3000/37kW Table length (mm) L = 2.200 Table width (mm) W = 1.800 Longitudinal X (mm) X = 3.500 Cross Y (mm) Y = 2.000 Pos ATC Z = 1.250 Number APC .W = 800 ATC 60 position 20 bar high pressure coolant
used
Spindle diameter: 130 mm Cross X: 3500 mm Vertical Y: 2000 mm Table length: 1800 mm Table width: 1600 mm Positions ATC: 0 Number of pallets: 0 CNC Brand: Heidenhain CNC Model: TNC 415 Make TOS WH13 CNC Type 1996 Year Heidenhain TNC 415 - 5 Axis tos wh13 cnc cnc table borer tisch bohrwerk kotter Spindle diameter (mm)130/iso50/37kw Table length (mm)1800 Table width (mm)1600 Longitudinal X (mm)3500 Cross Y (mm) 2000 Pos ATC 1250 Number APC.w = 800 1500 rpm
used
Spindle diameter: 105 mm Cross X: 1800 mm Vertical Y: 1250 mm Table length: 1400 mm Table width: 1250 mm Positions ATC: 0 Number of pallets: 0 CNC Brand: Heidenhain CNC Model: TNC 426 Make TOS WH105 CNC Type WH 105 CNC Year 1998 Tos WH 105 CNC with TNC 426 - 5 Axis Spindle diameter (mm)105 / iso50 / 28 kW Table length (mm) L = 1.400 Table width (mm) W = 1.250 Longitudinal X (mm)X = 1.800 Cross Y (mm)Y = 1.250 Z = 1.250 W = 630 CNC TNC 426 - 5 AxisSpeeds 2800 Rpm
new
Machine table for laser marking, stable design, aluminium electric height adjustment 36 cm by Rose+Krieger Additional mechanically adjustable height adjustment 4 frame feet - all adjustable Frame dimensions without table: H 121cm, W 88 cm, D 117 cm Table surface: W 80 cm x D 48 cm
new
Machine table for laser marking, lightweight design, aluminium electric height adjustment 36 cm by Rose+Krieger Additional mechanically adjustable height adjustment 4 frame feet - all adjustable Frame dimensions without table: H 121cm, W 88 cm, D 117 cm Table surface: W 80 cm x D 48 cm
used
Hydraulic scissor Lift Fabr. VEB TakrafCapacity: 3000 kgPlate size: 2500 x 800 mmPlate height: 185 mmMax. Lifting height: 1060 mmHeight lowest state: 550 mmEngine power: 2.2 kWMax. Pressure: 100 barColor whiteWith- mobile on wheels- each 5 clamping eyelets right and left on the plateused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Single column faceplate welding rotating and swiveling device make TEHAG type SG 3Fabr. -No: 6555 built in 1974Technical specifications:Load capacity: 600 kgSwing arm torque max.: 810 kpmMaximum torque for the face plate: 140 kpmProjection: 1600 mmSwivel range: 360 °Swing speed: 0.06 - 1.2 rpmRotation speed: 0.7 rpmFaceplate size: 1100 x 1100 mmPower connection: 380 V, 50 HzControl voltage: 24 voltsDimensions L x W x H: 4000 x 1200 x 2200 mmWeight approx: 2500 kgwith- remote control- foot controllerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Welding turning device make TEHAG type DB 15Built in 1979Technical specifications:Max. Weight: 150 kgChuck diameter: 250 mmExternal dimensions approx: 600 x 500 x 800 mmWith- Infinitely variable speed adjustment- R + L run- inclinable chuck- foot switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
new
table length: 184 mm table width: 132 mm table load: 0,02 t T-slot - width: 13 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.