t cork used for sale

Tipper Tie Alpina GmbH cutter with lifter for 200 liter meat bins and ejector, model: TTChop20, serial number: 872.010, year of construction: 2015, 400 V, 3 Ph, 50 Hz, 180/220/250, 98 kW, weight: 4100 kg, s/s bowl, volume: 200 liter, dimensions: 3250 mm x 2600 mm x 2200 mm. Including 12 extra knife sets.

Transport belt, s/s frame, plastic belt, belt width: 600 mm, total dimensions: 4300 mm x 630 mm x 1200 mm.

Turbin reverse osmose system, type: RO-10, serial number: PAT2020-384, year of construction: 11-1-2021, design volume: 10 m³ per hour, 16 bar, 32 amp, dimensions: 4600 mm x 1000 mm x 2000 mm.

Transport belt, s/s frame, plastic belt, belt width: 600 mm, dimensions: 3500 mm x 900 mm x 1200 mm, with s/s frame, dimensions: 5000 mm x 700 mm x 900 mm.

Tronrud Engineering case packer, type: CP30, serial number: TE1002350, year of construction: 2018, 400 V, 3 Ph, 50 Hz, 25 A, weight: 2700 kg, capacity: 30 cases / minute, plastic infeed belt, belt width: (2x) 30 mm, clearance: 340 mm x 380 mm, plastic outfeed belt, belt width: 330 mm, total dimensions: 4650 mm x 5650 mm x 2570 mm.

Toyota electric pallet lifter, type: LWE160, number: 6558023, year of construction: 2018, capacity: 1600 kg, fork length: 1100 mm, total dimensions: 1600 mm x 700 mm x 1300 mm. Without charger. Technical condition unknown.

Double transport belt, s/s frame, plastic belts, belt width: 600 mm and 340 mm, total dimensions: 4000 mm x 900 mm x 1800 mm.

Robust swivel milling machine T 26 swivel from -45 to +45 degrees Swivel milling machine in very good equipment A treat for every Martin fan Pole-switchable drive motor 5 / 6kW with automatic motor brake R/L Barrel Swivel angle from - 45 to + 45 degrees electrically adjustable Height adjustment max. 150mm, electrically adjustable When adjusting the height, the correction factor for the swivel angle is displayed in the upper display, which is then adjusted at the stop, so that adjustments can be made according to drawings Four speeds 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30mm, mandrel fix quick-change spindle with torque wrench T226 comfort stop with digital displays for overall adjustment and infeed jaw individually, as well as input of the cutter diameter, whereby the cutting depth is automatically calculated Stop with lifting device can be swivelled away (for s ...

The testing device can measure even the smallest leaks in packaging (helium detection)., The device is little used and in good condition., Information from the manufacturer’s brochure:, The detection limit of < 10-8 mbar l/s of the CONTURA Z can only be determined by mass spectrometric, Analysis can be achieved with a test gas., However, when sensitive flexible packaging is exposed to such a pressure difference,, the sealing seams could be subjected to such severe stress that the package could even burst., Such stress is eliminated by the patented membrane chamber principle of the CONTURA Z²., Function:, The product to be tested is placed manually or automatically on the bottom membrane. When the lid, is closed, the test procedure is initiated automatically., During the evacuation, the pressure of the atmosphere pushes the highly elastic membranes against the, packaging, and the conto ...

pressure:1000 t table length:4000 mm table width:1600 mm Controls:SIEMENS S7-1500F PRESS DESIGN:. - frame design : Transfer press :. - Drive type : mechnical :. - openings in uprights : yes :. - opening in table : yes :. - moving bolster : yes :. - number of tables:2 PRESS FORCES:. - total force (nominal):1000 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):1600 mm - height above floor level:600 mm - autom. tool clamping device : yes :. RAM:. - stroke:400 mm RAM (MECHAN. PRESS):. - ram adjustment:300 mm - ram adjustment:100 mm - number of strokes min:8 /min - number of strokes max:50 /min - hydraulic overload protection : yes :. TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):900 mm - shut height (stroke down, adjustment up):766 mm - distance between columns (H-frame):4250 mm - Free passage between side c ...

turning diameter:120 mm turning length:650 mm weight of the machine ca.:11 t dimensions of the machine ca.:5,032 x 3,048 x 2,445 m Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts.

turning diameter:120 mm turning length:650 mm weight of the machine ca.:11 t dimensions of the machine ca.:5,032 x 3,048 x 2,445 m Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts.

bore capacity in steel (diameter):- mm throat:- mm bore stroke:- mm x-axis:1.800 mm y-axis:1.600 mm z-axis:1.250 mm w-axis:630 mm max. table load:5.000 kg table length:1.400 mm table width:1.600 mm spindle diameter:105 mm spindle turning speed range:3.300 U/min numbers of positions in the tool changer:40 internal coolant system feed:40 bar Splash guard around rotary table Chip Conveyor Oil cooling unit (chiller) Touch probe Renishaw RMP60 Upgrades in 2024 and 2025 Retrofit of X and Z axis ball screws at producer ? KSK Kurim CZ New linear scales Heidenhain in X and Z axis including cabling retrofit of Z axis - new Biplast V lining on guideways, hand scraped Biplast lining on Z axis new TOS Varnsdorf parts for tool clamping and automatic tool changer arm Overhaul of X, Z and Y axis feed motors at authorized Siemens service (new bearings and sensor) New Siemens hand wheel

turning diameter:220 mm turning length:- mm control:- distance between milling spindels:800 mm spindle speed max.:12.000 U/min daylight:66 mm machine weight ab.:11 t total power requirement:90 kVA Fanuc control Two turrets Two spindles Spindle bore 66 mm on both spindles Two Y-axes Parts gripper Hainbuch chuck on both spindles Tailstock function Chip conveyor Tool eye Short bar loader Tool holder package

spindle diameter:100 mm x-travel:1250 mm y-travel:1100 mm z-travel:950 mm spindle turning speed range:2500 U/min Rotary-table:1100 x 1000 mm table surface area:1000 x 1100 mm tool clamping:69871 DIN spindle stroke:630 mm spindle taper:SK50 total power requirement:22/34 kW max. workpiece weight:3000 kg weight of the machine ca.:13000 kg

x-travel:3500 mm y-travel:2500 mm z-travel:1250 mm bore spindle speeds:2500 U/min table load:12 t dia. of rotary table:1800 x 2200 mm numbers of positions in the tool changer:60 Lifting operator platform External tool cooling Spindle clamping support

turning diameter over bed:20 mm spindle passage:3-20 mm turning length:250 mm control:FANUC 31 i-A main-spindle speed:10.000 1/min subspindle speed:10.000 1/min Main spindle capacity:3,7 kW subspindle power:2,2 kW number of tools:35 weight of the machine ca.:3,3 t dimensions of the machine ca.:2,11 x 1,2 x 1,89 m CNC sliding headstock turning/milling centre with B-axis Control system: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously B-axis: 0°-130° freely programmable Rod passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power counter spindle: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: Main and counter spindle Number of linear supports: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2,110×1,200×1,885 Weight: 3,300 kg Conversion from long to short  ...

table length:2200 mm table width:2500 mm table load:16 t total power requirement:6,5 kW feed speeds:1,25 - 160 mm/min rapid traverse speed:2000 mm/min longitudinal adjustment:1500 mm weight of the machine ca.:12 t dimensions of the machine ca.:4,1 x 2,65 x 0,95 m Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.

turning diameter:275 mm turning length:900 mm spindle passage:65 mm power capacity at 100 % load:25/20 kW spindle turning speed range:1 - 5000 U/min spindle diameter in front bearing:110 mm c-axis:1 - 500 U/min. number of workpiece supports:4 tool turret:1 x-axis:290 mm y-axis:165 mm z-axis:360 mm b-axis:360 ° rapid speed:18/30 m/min number of tools:2x2 + 2x2 number of driven tools:2x2 + 2x2 mm toolpiece turning speed range:8000 / 2000 U/min power capacity:25% ED 5,8 kW tool taper:TRAUB 60 tool turret:2/3/4 x-axis:170 mm z-axis:600/950 mm y-axis:+/- 60 mm rapid speed:18/15/30 m/min number of driven tools:10 mm toolpiece turning speed range:1 - 6000 U/min power capacity:25% ED 5,8 kW tool taper:DIN 69880 40 x 63 total power requirement:95 kW weight of the machine ca.:16 t dimensions of the machine ca.:10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and  ...

faceplate diameter:4000 mm swing diameter:4300 mm turning height:330 mm faceplate turning speed range:1 - 92 U/min workpiece weight:18 t feeds:1 - 4000 mm/min main drive motor:55 kW total power requirement:85 kVA weight of the machine ca.:64 t dimensions of the machine ca.:90, x 7,2 x 5,5 m with CNC SIEMENS 840 D for 4 axis 2 Vertical Supports tool Basic holder chip conveyor

spindle diameter:200 mm x-travel:10000 mm y-travel:4000 mm z-axis:1500 mm W-axis (spindle longitudinal):1000 mm bore spindle turning speed range:1 - 2000 U/min dimension of the ram:600 x 530 mm high speed spindle taper ISO:60/50 rapid motion - x-axis:8000 mm/min rapid motion - y-axis:8000 mm/min rapid traverse Z-axis:5 m/min total power requirement:120 kW weight of the machine ca.:135 t dimensions of the machine ca.:16,0 x 5,0 x 10,0 m with CNC Steuerung HEIDENHAIN iTNC 530 hydrostatic guideways x and Y- axis autom. toolchanger 40-pockets autom. Pickup Station for angular milling head, universal milling head and facing head rotary table 3000 x 3000 mm , max load 60 to. v-axis 2500 mm chip conveyor and coolant attachment

turning diameter:445 mm turning length:2000 mm turning diameter over bed slide:660 spindle bore:65 mm spindle speeds::16 - 3150 U/min. rapid motion - x-axis:10 mm/min rapid traverse Z-axis:15 m/min total power requirement:34 kW weight of the machine ca.:7,5 t dimensions of the machine ca.:6 x 2,5 x 2,2 m with CNC Control TX 8 D C-axis driven tooling 14 station turret head 3 jaw chuck dia. 315 mm tailstock, steady as NC-axis diverse driven toolholders diverse turning toolholders chip conveyor and coolant attachment

spindle passage:25 mm Article: CNC sliding headstock automatic lathe Manufacturer: Tornos Type: Deco 2000/20 Year of construction: 2001 Control: Fanuc spindle diameter: D25 mm max. speed: 7000 rpm comb: 2 (X,Z,Y-axis) Front attachment: 1 (X,Z,S-axis) Loading magazine: Tornos Robobar SSF Chip conveyor: Hinged belt conveyor other: various accessories such as polygonal impact device, HF spindle Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Weld-on part with VTN / Martin old small mount, Dimensions of the mount:, Bolt diameter: 50 mm, Handle/mounting width: 190 mm, Bolt spacing [center - locking plate]: 320 mm

General SKU025C042 MakeServo-Lift GmbH / Pharmatech TypePharmalift Hoist No.E-4398 A Year of construction1992 LocationBarneveld Main Features MaterialStainless steel Motor1.5 KW Height2550 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4301 (304) Lifting machineSlewable IBC hoist (1x) Max. weight150 KG Lifting height695-2550mm Hydraulic drivecheck With hydraulic unitcheck Motor1,5 KW, 230/400 Volt Information With switchgearcheck Floorspace1,8x1,0 M Total height2,9 M Extra Specifications- With 1x IBC (316), Dim. 500x500x400mm, Conical bottom 350mm Lifting/tilting machinesDiscountServoliftConveying systems > Lifting/tilting machinesDiscountBrand > Servolift What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspec ...

General SKU018W114 MakeApex Engineering UK TypeGranupex GR 311-565 No.A-46560 Year of construction1998 LocationBarneveld Material Jacket materialStainless steel Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket2.5 Bar Main Features MaterialStainless steel Volume565 Ltr. Specified Features - Tumbler dryer MaterialStainless steel 1.4401 (316) Tumbler dryer/granulator (1x) Capacity450-565 Ltr, Bulk density max. 1,2 G/CC Diameter± 800mm Cylindrical length± 1200mm Inletdia. 460mm Outletdia. 200mm With jacketcheck With braking motor11,0 KW, 400/690 Volt Dryer speed5,5-17,5 Rpm With lump breakerLiquid Dispersion Bar, Max. 2000 Rpm Motor11,0 KW, 380-415 Volt With vacuum pumpmake PIAB type MLL-400 With condensermake APEX, type 61A Information With switchgear(Dim. 100x400x150 CM)Tumbler dryersDiscountApexDryers > Tumbler dryersDiscountBr ...

General SKU079G384 MakeItalvacuum Borgaro Torino TypeCriox RB-1500 No.3336 Year of construction1996 LocationBarneveld Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket1.5 Bar Main Features MaterialStainless steel Volume1500 Ltr. Specified Features - Tumbler dryer Double cone tumbler dryer(1x) Capacity1500 Ltr, Useful capacity 600 Ltr Inlet/man hole dia. 450mm Outletdia. 350mm With jacketcheck Max. temperature95 Degr. C. Motor1,5 KW, 230/400 Volt (Ex) MaterialStainless steel 1.4404 (316L) Information Floorspace4,0x2,3 M Total height2,4 M Weight4000 KG ATEX compatiblecheck Extra Specifications- Cone equipped with 2 flanges which can be used to install choppers Tumbler dryersDiscountItalvacuumDryers > Tumbler dryersDiscountBrand > Italvacuum What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compare ...

General SKU050C396 MakeEdak AG Dachsen No.1362 Year of construction1993 LocationBarneveld Specified Features - Tumbler dryer Material finishPolished inside Material Jacket materialStainless steel Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume500 Ltr. Tumbler dryers Double cone tumbler dryer(1x) Capacity1145 Ltr, Useful capacity 500 Ltr Diameter1300mm Cylindrical length350mm Conical length775/600mm Inlet/manhole dia. 500mm Outletdia. 300mm With jacketcheck Max. temperature-30/+200 Degr. C. Motor± 0,75 KW MaterialStainless steel 1.4435 (316L) Information Floorspace3,3x2,5 M Total height1,6 MTumbler dryersDiscountEdak DachsenDryers > Tumbler dryersDiscountBrand > Edak Dachsen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new - ...

Overview The Zalkin screw capper top is made of stainless steel and has 22 capping heads. The running direction is from left to right (clockwise). It comes with an electronic height adjustment. 28 mm aluminum closures have been processed. The maximum output is 36,000 bottles per hour. Tech Specs: Pitch circle diameter 731.11 mm Number of closing elements 22 Pitch 104,4mm Running direction left-right (clockwise) Material: SST Electronic height adjustment Closures: 28mm aluminum closures Accesories: Six new closing elements Closure sorting unit Spare parts lists and technical documentation

Throughfeed case clamp Make: ERREGI Type: Tecnopress VR2/2 New machine Fast - Silent - Clean - Lean - Universal - Service by Wehrmann Technical data:  Self-positioning thru-feed carcase press The load bearing structure of the machine consists of a double portal in welded tubular steel, inside of which the two mobile heads and the presser table run. -The presser table and the mobile head are driven by motors. - Each of the mobile head and fixed is fitted with three horizontal pressure beams with programmable positioning moved vertically by an electro mechanical system. - The belt system is positioned on either side of the machine to allow the carcase to be clamped equally well, whether is his depth. -The carcase transfer system is located at the bottom of the bed and consists of an electro-welded steel structure on which a closed loop belt r ...

Witzig & Frank TriFlex 5XYear of manuf. : 2018 Control : Fanuc 30i-B ____________Description:In General:Year of construction:2018Control system:FanucProcessing stations:5 piecesLoading station:1 pieceTravelling range:X-axis:450 mmY-axis:500 mmZ-axis:450 mmRapid traverse X/Y/Z:50 m/minTurret:Number of stations:8Speed:13,300 rpmTorque:58 NmTool holder:HSK 63 CWorkpiece/device:Dimensions max.:350 x 350 x 350 mmMax. permissible mass:250 kgMedia supply line:6 piecesNC swivelling rotary table:A-axis:+/- 150°B-axis:360°Max. load:250 kgTable diameter:320 mmEquipment:Loading/unloading:Fanuc Robot M20i-AChip removal:2x chip conveyorsCoolant supply:IKZ system, 20 barPosition measuring systems:Direct in all axes

motor in front of the accretorial cassette for AccuSet - all details can be seen on the picture. The engine is tested and comes from a working AccuSet. Available on stock

cassette for AccuSet - all details can be seen on the picture. The cassette is tested and comes from a working AccuSet. Available on stock

cassette for Avantra25 - all the details can be seen on the picture. The cassette is tested and comes from a functional Avantra25. Available on stock

drive motor for Avantra25 - all details can be seen on the picture. The engine is tested and comes from a functional Avantra25. Available on stock

Digital Program Air table Side table right with air Side table left with air Photocell Cutting sanduder 2 knives Unloader BA 7 Still in operation: No Available: immediately

50 pieces of truss/carrying bar S70 L. 2.350 mm, top flush welded, max. Bel. / pair = 750 kg (assuming evenly distributed load), e.g. for 2 x industrial pallet of 1,000 mm / 375 kg side by side, colour RAL 6029 (mint green), very good condition Price of EUR 12.50 + VAT. + 100 hedging pins € 0.50 = net € 50,-

Deutz Zylinderköpfe im Tausch komplett mit neuen Ventilen,Sitzringen+Führungen. info@miw-zeven.de

Technical data: Diameter over bed: 625 mm Turning length: 1500 mm Diameter via slide: 325 mm Spindle head shape: Cam-Lock Spindle drilling diameter: 105 mm

Stainless steel container with manhole 500 litres capacity Derivative: NW 50 Dimensions in cm: 120 height x 93 length x 74 width

Basic refurbished Parta U II Cladding sheets new made of stainless steel All wear parts are renewed, Machine is completely rebuilt, Chamber and rotary vane correspond to a new machine, incl. 2 Mehler/ Or Öler Conveyor belt right/left defined position stop stepless speed control Warranty 6 months Suitable for different doughs Weight ranges: 1 chamber 300-2800gr 2 Chamber 110-1250gr Optional: Drop wave Large funnel etc Machine can be tested with dough at any time Delivery and commissioning as well as training possible.

Excenter screw pump Fabr. Cheeks, Type 60.4 R-ST

MWM TBG 234-V12, MWM TBD 234-V12 2 piece crankshaft, recon incl. gear and counterweights TN: 1216 3119 / 6.234.0.140.016.6 1st stage Price/piece: € 4,250.00 (ex works) Attention: We also have various other RECON parts from different manufacturers/types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

2x crankshaft, recon incl. gearwheel and counterweights PN: 1216 3119 / 6.234.0.140.016.6 2x 1st step Price/each: € 4.250,00 Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- Sales to commercial customers only! ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us.

1 of second-hand but unused! Thiele rotary placer (coupon feeder). Type 400. New 1985. Maximum speed 400 coupons/minute. Min/max coupon size: 38x38 - 152x152 mm. Size adjustable. Wired for 115V/60Hz.

Special items deep drawing film Under film white 150 my 432 mm wide 40 rolls a. 500 lfm. = 20,000 lfm Upper foil white 70 my 415 mm wide 40 rolls a. 500 lfm. = 20,000 lfm Roller core: 76 mm suitable for feta cheese packaging or similar Prices on request

Saw blade width: max. 110 mm Roll diameter: 1100 mm passage height 600 mm Opening width: 200 mm Number of feed rollers: 4 roll Adjustment: pneumatic Main engine: 22 kW Infeeding seed: max. 40 m / min,

Cat. No. 11-3015 in very good condition Two-phase decanters, also known as sewage decanters, are used for the continuous separation of solids from liquids with a high solid content. Due to the high speed of the drum, the solid particles settle on the drum wall and are continuously transported by the built-in conveyor screw to the solid discharge. The almost solid-free, clarified liquid leaves the separation space via openings at the opposite end of the drum. Built: 1973, Max speed 5000 rpm Power: approx.3000 Ltr/h Specific weight of the solid in the medium slingshot max. 2.3 kg HxWxD: 95 x 220 x 130 cm Weight: 745 kg For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scop ...

Thyssen Krupp model GK270NC Banbury type internal mixer, 4 wing tangential rotors, Year of manufacture: 2003 Latest Continental design chamber! Hydraulic hopper + power pack. Body and hopper only in good condition. Unidrive gearbox and motor can be quoted for if required (same centres as 11D or F270).

Cat.-Nr. 09-2900-2 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...