system used for sale

mobile heating system, central heating system, steam heating used STEAG / LOOS Boiler capacity: steam 3.2 t/h Boiler manufacturer: LOOS Boiler type: UHD 3200 Temp. max 190°C Pressure max 13 bar Boiler capacity 2650 l Burner WALKER D112/140-2 7.0 kW Heat and soundproofed container 9.2 x 3.6 x 3.6 m Transport weight: approx. 25t Operating weight approx. 30 t Electrical power requirement 25 kW Changes and errors in the technical data, information and prices as well as prior sale reserved.

AXXAIR orbital welding system was built in 2020 in France. It is an extremely easy-to-use and efficient solution for precision welding of tubes with a maximum diameter of 170 mm. The mechanised orbital welding is performed using the TIG method, in which a torch with a non-fusible tungsten electrode moves around a stationary workpiece. In this way, welds of the highest quality, repeatability and cleanliness are produced. The orbital welding system is offered with all the necessary components including – orbital welding power source AXXAIR SAXX-210 – open head for orbital welding SATO-170E41 – orbital cutting machine AXXAIR CC172 Technical specifications of the individual components of the AXXAIR orbital welder Power source - single-phase network with earthing - supply voltage 110-230 V ± 15% - frequency: 50/60 Hz - input current consumption (at 230 V): 25 A - input c ...

AXXAIR orbital welding system was built in 2020 in France. The system, designed to weld tubes with a maximum diameter of 220 mm, proves itself wherever the highest quality, repeatability and cleanliness of joints are required. The mechanised orbital welding is performed using the TIG method, in which a torch with a non-fusible tungsten electrode moves around a stationary workpiece. The use of this solution guarantees welds of the highest quality, repeatability and cleanliness. The orbital welding system on offer is fully complete and consists of the following parts: – orbital welding power source AXXAIR SAXX-210 – open head for orbital welding SATO-220E41 – orbital cutting machine AXXAIR CC222 Technical specifications of the individual components of the AXXAIR orbital welder Power source - single-phase network with earthing - supply voltage 110-230 V ± 15% - input cur ...

The detected defects from a camera system are transferred via an interface to the fault marking system, where a label is then placed as a marker on the side of the film roll. Project number 2010 / A8392 Rated voltage 230 V; 50 Hz Rated power 1 kW Dispensing speed 1-600 mm/s (depending on label size) Positioning speed 25-30 mm/s Thermal Transfer Printer

Process chiller / chiller air-cooled, Type: TAEevo Tech 201P3-20 MTA S.p.A. TAEevo Tech 201 P3-20 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crank tray heating, phase monitoring, buffer tank 350 ltr. and built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 44.2 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 7.53 Available pump pressure (bar) 2.67 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 23.69 Max. current (A) 39.83 Starting Current Circuit (A) 134.4 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 998 Connection Rp 2" Serial No.: 2200412190 Year of construction 20 ...

Palletiser consisting of - Knorr packing line - Knorr automatic jogger with air removing roller - Bizerba ITS industrial sheet counting scale Knorr system for palletising counted sheet. Paper is counted by Bizerba paper scale, straightened and smoothened and in the jogger with air removing roller. Paper is picked-up positively with a pincer gripper system, transported and positioned accurately onto pallet. However, equipment can also be used as a performance-enhancing alternative to a paper lift for offloading your large sized guillotine, then left standing

Copeland compressor unit Type: D6DT5-320X-AWM/D (x4) Volume: 4 x 126.9 m3/h Cooling capacity: 220 kW przy -10°C/40°C, 56 kW przy -35°C/40°C Refrigerant: R404A Reference number: Z17 Pieces in stock: 1 Condition: Used Price on request, We have many other kealte plants and meat and fish processing machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

SpectruMedix RVL 9612 Genetic Analysis System incl. PC and accessories The device is suitable for molecular biology laboratories, research institutions and universities for genetic analysis (e.g. DNA sequencing, genotyping). Model No.: RVL 9612 Manufacturer: SpectruMedix LLC, State College, PA, USA Serial Number: 1102 Revision: 2.0 Year of manufacture / Date of manufacture: 17 March 2006 Mains voltage: 115/230 V Frequency: 50/60 Hz Power consumption: 3300 W Phases: 1 (single-phase operation) Certificates: CE compliant (HCS CE-D) Condition: Used (see pictures). Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!

Fortuna Viereck Ciabatta - Bread roll system Type: TM 4-row with flour spreader with sprinkler with seed storage with turntable with Spüher Hourly output approx. 3800 pieces Stainless steel version on rolls 380V 50Hz

Fortuna + Lippelt Bread Roll System Compact Fortuna Primus K4 Head Machine 4- Rows Weight range: 35 - 80 grams Volumetric lobe diameter: 64 with hardening plate Hourly output max.  5000 / piece Front + Rear + Roller Flourer 2x working speed (slow + fast) Siemens Simatic Touch Panel Control Rev. 2010 Machine volume max. 70dB Weight head machine: 600kg Lippelt fermentation cabinet Type: G 8000 L/R Year of construction 2014 Operable from 4 to 6 rows (depending on the head machine) Number of hours per head machine from 5000 - 8000 pieces with punching station for round and long rolled dough pieces  4x punching with cutting device punch Cutting strength adjustable with stamp station with direct setting on 58x78cm & 58x98cm sheets with settling tape Special fermentation carriers without mould accumulation Siemens Touch Panel Color Screen incl. accessories on  ...

I sell the Fensterbau cone cutting and slotting system Weinig Unitec 10. Year of construction 1998. Milling heads OERTLI. Available the same. Unit price 5.500 euro. 3 pcs. available. Condition very good !

for sale chocolate tanks Capacity 1000 liters and 2000 liters. Heating jacket Stirrer for thick chocolate mass I send photos at the client's request

Brüel & Kjær Vibration Testing System 4812 + 4801 Shaker Specifications – Exciter Head 4812 • Max. dynamic force: 445 N (100 lbf) with Body 4801 • Current consumption: 23 A RMS with cooling / 11.5 A without • Resonant frequency: 7.2 kHz • Travel: 12.7 mm continuous / 14 mm max • Acceleration limit: 981 m/s² • Bolt Torque Limit: 3.4 Nm • Dimensions: Ø 235 mm × 178 mm • Weight: 8 kg • Material: hard anodized aluminum Specifications – Exciter Body 4801 • Power supply: 380 V ±10% or 440 V ±10%, 3-phase, 50 Hz • Cooling: Air-cooled (integrated fan) • Installation height (without head): 370–405 mm • Additional height due to head: +50 to +130 mm • Weight: 75–80 kg Description & Use: Condition: Used (see pictures). Hint: For detailed technical data and processing instructions, we strongly recommend consulting the or ...

I sell the window construction kit: 1 pcs. cone cutting and slotting system Weinig Unitec 10. 1 pcs. profile automatic converter center Weinig Univar 10. Year of construction 1998. Milling heads OERTLI. Available the same. Price together 10,000 euros. Condition very good !

RMS Vibration Vibration Test System Here we offer you an RMS Electrodynamic Vibration Vibration Test System. RMS Vibration Vibration Test System Test Manager SWR 900 Vibration exciter SW 3006 30V-50A-3434 N Power amplifier TGA 3000-000.00 Condition: used Unchecked! Tests were not possible Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone. Written order possible by email or fax

Process chiller / chiller air-cooled, Type: TAEevo Tech 351 P5-offAD bypass MTA S.p.A. TAEevo Tech 351 P5-offAD Bypass are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Including crank pan heater, electronic expansion valves, phase monitoring, buffer tank 350 liters and built-in P5 high-pressure pump. Extras: - Open filling system/ tank attached - Bypass with manual valve between water inlet and outlet Cooling capacity kW 66 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 11.2 Available pump pressure (bar) 4.68 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 39 Max. Current (A) 68 Starting Current Circuit (A) 213 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 108 ...

Process chiller / chiller air-cooled, Type: TAEevo Tech 251 P5 MTA S.p.A. TAEevo Tech 251P5 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Including crank tray heating, phase monitoring, buffer tank 350 ltr. and built-in P5 high-pressure circulation pump. Cooling capacity kW 48.7 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 8.26 Available pump pressure (bar) 4.93 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 29 Max. current (A) 50 Starting Current Circuit (A) 149 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 1034 Connection Rp 2 " Serial No.: 2200384598 Year of construction 2022 Condition: Optical 2, Technically ok Used Price: on request in Eur ...

- According to layout bottle transporters - According to layout carton transporter - With central control

SPECIFICATIONS: Machining max mm: 330 Ø mm: 40 Computer-aided measuring and displaying system for Measurement of tools, digital display of tool data Input of profile dimensions, calculation of spindle setting data Transfer to the machine by means of a label

HUNKELER POST-PROCESSING SYSTEM (unwinding, punching, turning, rewinding) The line consists of: Position 1: UNWINDER HUNKELER UW4 G 7119 (M. No.: 659595 // Age: 2001) Position 2: CROSS and LENGTH CUTTER HUNKELER AM 520-W 7150 (M.No.: 1509697 // Age: 2004) Position 3: TRANSFER STATION HUNKELER PU 520-W 7150 (M.No.: 2010062 // Age: 2008) Position 4: PUNCHING & PERFORATING UNIT HUNKELER DM 520-W 7152 (M.No.: 1509697 // Age: 2004) Position 5: TURNER HUNKELER WM 520-W (M.No.: 1509697 // Age: 2004) Position 6: CUTTER (TRANSVERSE and LENGTHWISE)HUNKELER CU 520-W 7154 (M.No.: 1509697 // Age: 2004) Position 7: CRISS CROSS DELIVERY ERTEC STSC-2 (S.No.: 34 // Age: 2008) Position 7.1: Brand new (never used) FOLDING UNIT FS4 7127 (M.No.: 1509697 // Age: 2004), can be used instead of the display Position 8: CRANE

SPECIFICATIONS: Number of filter bags: 150 - Ø mm 123 04 Ker crushing plates Height mm: 3000 Fan Power Hp: 30 Star valve Ø mm 320 Tank with 15 solenoid valves Triboelectric probe Spark detection system Output screw conveyor Switch box with inverter Complete with ladders, fencing and piping

see performance data on photo with data

Process chiller / chiller air-cooled, Type: Galaxy GLT 135 SHE MTA S.p.A., The Galaxy GLT 135 SHE are compact chillers designed for outdoor installation (from -20°C to +43°C) are suitable with plate evaporator, scroll compressors, control and control cabinet, shut-off valves for compressors, equipment for low ambient temperatures down to -20°C (EC fans), P2 pump, 510 litre buffer tank, electr. Antifreeze heating, condenser filter mats incl. Vitaulic couplings. Cooling capacity (kW): 354 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 60.7 Available pump pressure bar: 2.51 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration Circuits (Quantity): 2 Compressors (quantity): 6 Power levels (%): 0-17-33-50-67-83-100 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW): 167.7 Ma ...

I sell the complete window construction profiling line: 1 pcs. 5-spindle four-side planer with saw Weinig Unimat 23EL - without grinding machines HESS - other replacement machine by appointment 2 tap cutting and slotting system Weinig Unitec 10. 2 pcs. profile automatic converter center Weinig Univar 10. - Set of complete Weinig automation feeders and foerderer. - without a central computer - must be added and programmed. Year of construction 1997. Milling heads OERTLI. Available the same. Immediately dismantled with original pallets. Price together only 48,000 euros. Condition very good !

Bread roll system Kövy KA 2 4- deer hourly output 4800 pcs. for 60x40 and 60x80 cm tilting planks Baker's condition ready for action

This Collin inspection system has been in the machine storage at Plastima Used Machinery since 2021. The machine is from 2007 and has a normal number of working hours for its age. – Brand : Collin Pilot & Lab Solutions – Fashion model : Coficos AIS – Construction year : 2007 – Working hours : NB

Hot melt adhesive application system Adhesive Application, Hot Melt Glue Gun Make HBB Heinrich Bühnen GmbH Type WCH 1146 CE Serial No. 46-1007-04 PROline tank system Year of construction approx. 2004 Maximum power consumption approx. 1860 watts Electricity connection 230 V Current consumption 8 A Protection class IP 32 Electronic temperature controller grado 905 Operating temperature 135 – 230°C Heating capacity tank 1200 watts Melting capacity 4.5 kg/h Warm-up time approx. 20 minutes Hot melt adhesives as granules or block goods Usable tank volume 4.5 liters With heated hose type HP With hot melt adhesive hand applicator With instruction manual

A compact extraction system for light applications of the Laser marking, coding and engraving. AD-Access combines cost-effective operating costs with performance, which is adapted to smaller laser applications. A three-stage Filter status display and three-stage filtering are standard Included: DeepPleat prefilter, HEPA range and chemical range. AD Access is an ideal solution for beginners to secure Working conditions for the operator and product quality Maintain.

Process cooler, chiller, chiller - air-cooled, Manufacturer: MTA S.p.A. Type: TAEevo Tech 902 P3 – 178 kW TAEevo Tech 902 P3 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crank tray heating, phase monitoring, buffer tank 950 ltr. and built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 178 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 30.4 Available pump pressure (bar) 3.16 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 90 Max. current (A) 160 Starting Current Circuit (A) 365 Protection class: IP54 Dimensions: Length (mm) 4655, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2907 Connection Rp 3" Serial No.: 2200360489 Ye ...

BOFA's Advantage 350 suction and filter system effectively removes potential harmful vapours and particulate matter produced during the laser marking process arise. By maintaining a dust-free operating range, the System to protect valuable devices, a labeling of continuously higher To achieve quality, reduce scrap rates and reduce pollutants. The low-noise and compact Advantage 350 system is ideal for use light laser marking applications in schools, among others, Sign workshops and small industry.

Specifications: • RKT refrigeration dryer for the treatment of compressed air • 10 bar operating pressure • 4 kW • 400 V • 570 l/min effective delivery rate • ECN pressure vessel 270 l powder-coated • Duplex filter set WBF 63 MFO/CA consisting of Microfilters and activated carbon filters incl. automatic float trap (for paint booth) • Oil-water separation system KON-C2 incl. inlet and outlet fittings • 2 fully automatic tank drainage valves KN 1.230 Year of Make: 2025 Price: We ask for your binding offer. Available from: immediately Terms of delivery: ex location – EXW Berlin Payment Terms: Payment before pickup Accessories without guarantee. The following applies: "Object bought as seen". The prospective buyer must satisfy himself on site of the completeness of the property.

Extraction AD-Oracle from Bofa - new : with start/stop via external 24V optional: in stainless steel, , hose set, VOC, filter change signal - the compact device offers many areas of application - the filters used are characterized by a long service life - the two filter cassettes separate dust, fine dusts and gases - the air flow is 380 m³/h - the dimensions are 980 mm x 430 mm x 430 mm (HxWxD) Typical applications : Marking laser Engraving laser Cutting lasers Welding laser Soldering and welding smoke

split chiller, chiller - water-cooled, Type: OCEAN Tech OCTME 230 – 66 kW Manufacturer: MTA S.p.A. OCEAN Tech OCTME 230 are water-cooled chillers for indoor installation in split version (without condenser) without hydraulic circuit (pump, accumulator) incl. crank tray heating, phase monitoring. Cooling capacity kW 66.2 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 11.4 Condensing temperature: 45°C Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 27 Max. current (A) 45 Starting Current Circuit (A) 178 Protection class: IP22 Dimensions: Length mm 1735, width mm 660, height mm 1200 Weight kg 383 Connection cold water G 2" B Refrigerant connection Ø mm: 22 / 28 ODF Serial No.: 2200388958 Year of construction 2022 Condition: Optical 1 , Technically ok (Stock unit, as good as new) Pri ...

Dissolution Tester for testing the release of active ingredients from drugs. Incl. UV/VIS Spectrometer PerkinElmer.

Pilz safety system PNO m0p 773110, stocked goods, no functional test, manufacturer number: 773110. EAN number: 4046548013153

HausER composite system with 4 compressors Bitzer, 3 pcs. 6J-22.2Y and 1 pcs. 4G-20.2Y with control box, all wired The composite system can be used for plus as well as for minus.

Amico Uniflair SDC0200B precision air conditioner Model No.: SDC0200B Coolant Type Water Fan/s: Vent. with forward-drawn Shovel Power Voltage Device: 230V/1ph/50Hz SERVICE CONDITIONS Drying Ball Temperature 24.0 °C Wet bulb temperature 17.1 °C Relative humidity 50 % Altitude a.s.l. 0 m Air back pressure 20 Pa Entry Temp. d.Coolant 7.0 °C Outlet temp. d. Coolant 12.0 °C Glycol content 0 % Freezing temperature 0.0 °C Coolant flow rate 1237 l/h Coolant flow rate 0.34 l/s SERVICES AND FEATURES Total cooling capacity 7.2 kW Sensitive cooling capacity 6.4 kW Total net cooling capacity 6.7 kW Net sensitive cooling capacity 5.9 kW SHR 89.0 % EER ( Cooling Capacity / System Power Consumption 13.9 kW/kW Air flow rate of air conditioner (dry) 1600 m³/h Air flow rate of air conditioner (dry) 0.44 m³/s Air temperature outlet/unit outlet 12.9 °C Relative humid ...

I sell the scM Multiflex window angle system. Milling heads VIVALDI EU68mm. Incision + cone spindle right / cone side. 2 pcs. profile milling spindle + glass list cutting saw left / roll forming side Available the same.

Bitzer double composite system with 7 compressors. 4 of them are 6H-25.2Y and 3 of them are 4G-20.2Y

IZAN MAKINA IZFORM IZ5 roll forming line was built in 2019 in Turkey by İzan Makina – İmalat İnşaat İç ve Dış Ticaret Limited Şirketi. This line, distinguished by the use of the state-of-the-art technology available on the market, is designed for frame constructions. Its extensive machining capabilities allow for the precise, fully automatic forming of C- and U-type cold-formed profiles of various dimensions. These elements are used, among others, in partition walls and bathroom modules. The IZAN MAKINA IZFORM IZ5 profiling machine is offered with extensive equipment, including advanced BIM software and a sheet metal decoiler with a maximum capacity of 3 tonnes. The IZAN MAKINA IZ5 rool forming machine is currently configured for the production of C75x1.2mm and C100x1.2mm profiles. The production cycle is performed by means of a reliable tool head with the following machini ...

Double composite system BITZER for plus and minus, consists of 5 compressors. Negative composite consists of 2 pcs. compressor 4DC-5.2Y-40S Plusverbund consists of 3 pcs. compressor 4GE-20Y-40P Including switch box

Bitzer CO2 composite system type TPS4-2FHC-3K with 4 compressors type 2FHC-3K for TK

TEKO composite system with 4 PCS FRASCOLD compressor type Z30.126. With control box

ELECTROMASHSTAN EMC-SP/3/05 Sigma roll forming line was built in 2019 in Ukraine by ElectroMashStan. The line is designed for the production of precision Sigma-type cold-formed profiles, which are used in among others steel structures, load-bearing elements and supports. The production cycle is fully automatic, thanks to the use of an automatic sheet decoiler. The strip with a maximum thickness of 3 mm is uncoiled towards the workspace, where it is formed using rollers. The ELECTROMASHSTAN roll forming line offered is fully complete. Applications for Sigma profiles: – steel constructions (halls, warehouses, industrial buildings) – prefabricated buildings and light steel construction systems – load-bearing elements (girders, columns, beams) – brackets, bracing and structural frames – wherever a high load-carrying capacity is required in a relatively lightweight construct ...

Description 3,000 litre tank of RT water 04-B-100 4.000 liter tank acid 03-B-100 4,000 litre tank lye 02-B-100 2,000 litre tank of fresh water 01-B-100 2 x Soaking tank 27 m3 Material: 1.4301 Weight: approx. 2000 kg Service conditions: Inner container druchkos, 20°C when cleaning 85°C Execution: Surface inside bright rolled III c Surface outside of polished III c Seams sanded inside Ra < 0.8 μm, except fillet welds Seams stained and brushed on the outside N11 1 Piece DN 200 DIN 11850 Spout N10 1 piece DN 65 drainage nozzle with strainer N9 N8 N7 Company Sign N6 1 piece DN 25 DIN 11850 Cable conduit (ends flared) N5 1 piece DN 50 DIN 11850 inlet N4 1 piece DN 500 manhole with limit switch Schmersal N3 2 pieces level sleeve N2 1 piece DN 25/65 CIP removable N1 1 piece DN 250 Vent with vapour drain 2 x hot water tank 15 m3 Material: 1.43 ...

TEKO composite system with 4 pcs. FRASCOLD compressor type S20.56Y With control box

Composite system with 2 PCS. DORIN compressor, 1pcs. Type H850CC and 1pcs. Type H1002CC, 38.26 m³

SAA 2001 Aspirator Suction nozzle on the device 125mm Suction nozzle on the distributor 100mm Height 2000mm Weight 47kg Motor 1.5kw 230V 50Hz Nominal volume flow 2553 m³/h G&STÜ-5922201

FRAMECAD F300i roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact production line is the perfect choice for the efficient production of lightweight steel structures. This is because the FRAMECAD F300i enables the precise forming of C- and U-type cold-formed profiles of various dimensions (89 mm as standard), which are used in, among others, partition walls and bathroom modules. The machining process is fully automatic. The strip with a maximum thickness of 1.2 mm is uncoiled from the coil towards the workspace with a special roll forming system. Each profile is precisely formed, cut, punched, and marked, making them ready for direct assembly with screws. The FRAMECAD F300i roll forming machine is controlled via a touch panel with an intuitive interface. The full integration of advanced design software with the controller  ...

FRAMECAD TF550 roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact TF series (Truss and Frame) production line is an excellent choice for the mass production of fabricated solutions for the residential and commercial buildings. This is because the FRAMECAD TF550 enables the production of C- and U-type cold-formed profiles in various sizes (150 mm as standard), used as rafters, trusses and steel structures in a wide range of building projects. The entire production cycle is fully automatic. The strip, with a maximum thickness of 1.6 mm, is uncoiled from the coil towards the workspace, where it is machined by means of a special roll forming system. The profiles are accurately formed, cut, punched, dimpled and marked, making them ready for simple assembly with screws. The machine is operated via a touchscreen panel with an in ...