system storage used for sale

Used roll line KEMPER, type: Quadro Round -in bakery condition- For square, round and long-rolled rolls. - KEMPER Relaxer - WP KEMPER Quadro Round with 5 rows - With SIEMENS Simatic Touch control - Relaxation band - Long scooters and wrapping - Deduction AB 800-1000 - Sprinkling device - Including many different cutting rollers and warp knitting drums Weight range round: 40 - 150 g Weight range square: 40 - 150 g round rolls: max. 7,000 pcs./h Square rolls: max. 10,000 pieces/h Visits and test runs are possible by arrangement.

Macsa id K series CO2 laser coding and marking equipment. Manufacturer: Macsa ID Type: SPA K-1030 Power supply: 125V/230V; 50/60 Hz; (1 phase+N) 660VA Marking head: KS2-1000-10.2 μm, CO2 sealed laser tube, RF technology, 10.2 microns Working distance: 85-400 mm Dimensions: 235x193x656 mm Weight: 40 kg IP54

Key data: 4 Meter, 13 t

Machine Type: Plasma Inverter Cutting Machine Make Hypertherm Type Powermax 30 AIR Serial No. 033.100 Connection voltage 1 x 230 Volt Adjustment range 15 – 30 amps Duty cycle 20% ED at 30 amps Current adjustment infinitely variable max. cut-off cut for a short time 15 mm at 125 mm/min max. quality cut for a short time 7 mm at 500 mm/min Cooling inverter through built-in fan Cooling burner compressed air cooled Portable assembly system design Fuse 16 Ampere Optional accessories integrated compressor Dimensions L x W x H 420 x 195 x 330 mm Weight with burner 13 kg Age 4 years Condition workshop tested, very good incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece AIR T30 hand cutting torch 4.5 mtr. long 1 piece ground cable 1 Piece Instruction Manual Warranty: 18 months from th ...

A Plasma Finish low-pressure plasma system for surface treatment of workpieces is available. Chamber volume: approx. 15l, internal chamber dimensions X/Y/Z: 250mm/250mm/250mm, plasma frequency: 2.45GHz, plasma type: microwave, power range: 100W-600W, machine dimensions X/Y/Z: approx. 700mm/900mm/1850mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.

Glass and drying plant Lisec type VHW-20/6 Specifications: • Glass thickness (mm): up to 30 • Glass height (mm): up to 2000 • Cleaning brushes: 4 front and 4 rear

A Dimeco Alipress coil-to-sheet line with decoiler, straightener, and shear is available. Sheet width range: 200mm-1300mm, sheet thickness range: 1mm-7mm, cross-section range: 1400mm²-3250mm², max. feed speed: 30m/min, max. stroke rate: 150/min, max. material feed: 1000mm/stroke, straightener: Schechtl MSB100. Documentation available. An on-site inspection is possible.

IKS Cooling System

We have a unit with Bitzer compressors for sale. System wit R744 refrigerant (CO2) The unit capacity is 22kW -35C To and -5C Tc. Control panel with frequency inverter.

TH7 laser head, T-Speed 60 plates/hour, max. plate format 950 x 1163 mm, including automatic pallet loader APL, inline punch, maintained by Kodak Germany, Immediately available, conditions and price on request

Manufacturer: BJORN EVAPORATOR Model: ELT 200 Year of Manufacture: 2004 The evaporator was installed and commissioned and dismantled in October 2022 (Stored , not operational) Electrical Specifications: - Voltage: 3 × 400 V + 0 + Earth - Frequency: 50 Hz - Maximum Fuse: 3 × 150 Amp Find more here - .ucymachines/ Contact us at - sales@ucymachines

Supply air system Al-ko, Alko Therm AT4 41x32 Bj. 2016 2 pieces For sale now. Fully functional.

A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible.

Used head machine / dough divider KÖNIG, Type: Rex Industrie II - I-Rex 8 / 6 / 5 rows - Own integrated control system for individual operation - Weight range: up to 110 g Visits and test runs are possible by arrangement.

A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible.

Sänger & Massierer log infeed system

CNC Prima Power Laser Cutting & Welding Machine TYPE: Optimo 2545 Basic: X= 4,500mm, Y= 2,500mm, Z= 1,020mm Length of the shaker (per PC): 4000 mm Width 2250mm/ Duty width: 3000mm Height: < 400 mm Process path (with coupled movement): 10,000 mm Loading capacity: 600 kg/m2 Max Speed: 0.5m/s Max acceleration: 0.5m/s2 Max kickback:

An X-ray inspection device Mekitec for the food industry is available. Measurement device type: Rad Eye B20, max. power: 60kV/1.66mA/100W, method: inline inspection, test object: packaged food products, tunnel clearance X/Y: approx. 250mm/100mm, belt length: 1200mm, belt width: 250mm, max. belt speed: 1.3m/s, max. product weight: 5kg, machine dimensions X/Y/Z: approx. 2000mm/550mm/1200mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible.

A candle filter system Faudi with precoating principle for the treatment and purification of grinding oil is available. Operating fluid: grinding oil, flow rate: 360m³/h, tank capacity: 180m³, control: Siemens. Documentation available. An on-site inspection is possible.

Extraction Lissmac Type: DD 3200 BJ 2014 for Deburring Machines

Consisting of 8 air cushions 69 x 69 cm Control panel 9 Hoses The system has only been used a few times and is in mint condition.

A two-component mixing/carbonation system by KHS for the production of still and/or carbonated beverages is available. Throughput capacity: approx. 12000l-25000l/h, tank volume degassing/buffer: 2m³/2m³, mixing accuracy: +/-0.05°Brix, CO2 dosing accuracy: +/-0.1g/l, CIP cycle rinsing time: 20min. Machine dimensions X/Y/Z: approx. 3000mm/2200mm/2400mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible.

Göpel electronic, BasicLine AOI system, year 2016 According to consultation with the manufacturer, it is possible to convert the system to a 3D/360° system. After conversion, the device is equivalent to a new device and comes with a two-year warranty.

Manufacturer: Lundberg ‎ Model: WasteTech 200 Year of Manufacture: 2022 WasteTech 200 All-in-one Units are designed to capture, convey, cut and collect edge trim waste from up to 8 process machines. Configuration of Granulator(s) is customised to the material and number of process machines and disposal can be in a sack, TubeBag, bigbag or compactor. Specifications: - 4 cutting motors - Maximum air capacity: 3,000 m³/hour (1,770 CFM) - Maximum pipe size: Dia. 200 mm (8) transfer - Maximum suction distance: Up to 30 m (100 feet) - Size (LxWxH): 2,535 x 1,300 x 3,290 mm (8’-4” x 4’-3” x 10’-10”) - Weight: 495 kg (1,090 lbs) - Motor ventilator: 7.5 kW (10 HP) - Power: 3 Phase, 230-460V, 50-60 Hz - Sound: 68–72 dB (A) - Colour: RAL5010 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Qty. 1 Second-hand PET – CSD bottle filling line Mfc.: H+E Maschinenbau, MTA SpA, ABM, Posimat, Sacmi Filling, Bertolaso, JAKU/JB Michiels, KRONES AG, SMI SpA, Robopac SpA Built: 1992 - 2023 Capacity: 6,000 bph Products: CSD - PET Neck finish: PCO 1881 Format available: 0.5 L

Manufacturer: ACA Model: AGN2D2 Year of Manufacture: 2020 Condition : Good Weight: 1500 kg Input Voltage: 240V / 50Hz Phase: Single Power: 1500W Full Load Current: 7A Short Circuit Current: 30mA Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: ASYS / MODUS Model: TRM 01 + MODUS AOI Year of Manufacture: 2015 Type of Machine : ASYS conveyor with mounted AOI on the top. ASYS. Technical details ( ASYS) : Nominal Voltage: 230 / 115 VAC Frequency: 50 / 60 Hz Full Load Current: 0.6 / 1.2 A Working Voltage: 24 V DC Number of Phases: 1 Power: 0.13 kW Circuit Breakers: 0.5 / 3.15 / 10 A Pressure: 6 bar Flow: 5 Nl/min Technical details ( MODUS AOI) Voltage: 230V 50Hz Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Falch Model: Wheel Jet 30 2000-8-0-E Type of Machine : HD Water Jet Machine Specifications: - Pressure: 2000 bar - Flow rate: 8 l/min - Power supply: 400V, 63A Included Accessories: - 5 m high-pressure hose (false non-stop) - Safety equipment: suit, apron, helmet Find more here - .ucymachines/ Contact us at - sales@ucymachines

Coating line BTI- E- 400/10000 Chocolate coating line consist of - Completely in V2A - Engine manufacturer: SEW Eurodrive - Control: Omron/Schneider -Blower - Scheierkasten - Internal heating - Interior heating steel - Inlet belt approx. 1 meter - Base and full cover possible - Floor pan with thermo sensor - Floor pan double-walled hot water heated - In bottom pan Motion agitator - Floor pan can be manually extended for cleaning - Chocolate pump, pump head in V2A - Double-walled pipes, hot water heated - Detail wave OPTION: For real chocolate ( with cocoa butter ) Version with external temperature control machine for an extra charge Cooling Tunnel Model: BTI 400/6000 - Width of the conveyor belt in the cooling tunnel: 400 mm - Width of mesh tape in the enrober: 375mm - Speed of conveyor belt: 0 - 7 m/min - (Speed is adjustable) - Cooling compressor power: 3 HP  ...

Manufacturer: ASYS Model: BCO 01 Year of Manufacture: 2016 Nominal Voltage: 230 / 115 VAC Frequency: 50 / 60 Hz Full Load Current:0.35 / 0.7 A Working Voltage: 24 V DC Number of Phases: 1 Power: 0.07 kW Circuit Breakers: 3.15 A Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: ASYS Model: BC0 02 Year of Manufacture: 2016 Nominal Voltage: 230/115 VAC Frequency: 50/60 Hz Full Load Current: 0.6/12 A Working Voltage: 24 V DC Number of Phases: 1 Power: 0.11 kW Circuit Breakers: 3.15 A Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: MatriX Model: X3 Year of Manufacture: 2015 Condition : Excellent Accessories input Feeder output feeder Find more here - .ucymachines/ Contact us at - sales@ucymachines

KODAK Magnus VLF MTA Large Format Thermal Platesetter with MCU Multi-Cassette Unit (Four Cassettes) New TH 7 laser (May 2022) with only 1296 laser hours 2400 dpi Z-Speed Panel counter: 258861 Minimum size: 483 x 394 mm Maximum size: 1600 x 2083 mm Material flow from right to left with Prinergy TIFF Shooter Dell PowerEdge 7330 Plate development machine built in 206 Year of Make: 2006

KODAK Magnus VLF MTA Large Format Thermal Platesetter with MCU Multi-Cassette Unit (Four Cassettes) New TH 7 laser (08/2022) with only 2615 laser hours 2400 dpi Z-Speed Panel counter: 395443 Minimum size: 483 x 394 mm Maximum size: 1600 x 2083 mm Material flow from left to right with Prinergy TIFF Shooter Year of Make: 2016 New TH 7 laser (08/2022) with only 2615 laser hours

Manufacturer: EVG Model: Lithoscale Year of Manufacture: 2023 Condition New-Never Used Technical configuration: • For maskless exposure of wafer sizes up to 300 mm • High precision stage including contactless wedge error compensation • Self calibration via integrated sensors • Extensibility up to two (2) exposure heads in total for highest throughput • Separate control unit • EVG CIM Framework software • Self diagnostics during machine start up, automatic initialization of all motors, position end switches, sensors and pneumatic • Inspection available on request • PC controlled operating environment • Solid state drive and hard drive for high availability and reliability • Supported layout format: GDSII Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Orbotech Model: Ultra Discovery VM Year of Manufacture: 2011 Ultra Discovery VM delivers simple, intelligent, and powerful AOI performance with 10 µm line/space inspection capabilities for FC-BGA, PBGA, CSP, and COF production. Delivering super clear images essential for capturing the finest defects, the system achieves outstanding AOI results with minimal effort or training, even on complicated panels. Most of the manufacturer’s valuable time on the system is spent inspecting panels. Logic false calls are virtually eliminated and overall false calls are minimized, saving precious verification time. Benefits - High throughput and superior detection with a minimal number of false calls - Especially designed for inspection of the finest lines down to 10 µm - Quick setup even for the most complicated jobs for higher productivity - Automation ready - Very high uptime  ...

Manufacturer: Schmid Model: 25 Year of Manufacture: 2011 Description: Pass Through spray cleaner Accessories :Switch Cabinet. Media Cabinet Condition : Very Good Voltage: 400 V Frequency: 50 Hz Exterior Dimensions - Width 196.850 in (500.0 cm) - Depth 59.055 in (150.0 cm) - Height 250.000 in (635.0 cm) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Compressor system / compressed air system composed of: Compressor Type STA-010 Maximum pressure 10 bar Output 0.9m³ per min incl. pressure tank 350l (14BAR) with filter

ID3650 Wagner NFK2000 year/Baujahr 1998 Dust extraction system, chain filter, with rotary valve and spray water extinguishing system, raw gas volume 43,000 cbm/h, filter area 373 sqm, 250 filter bags Dedusting system, chain filter, with rotary valve and spray water extinguishing system, raw gas volume 43,000 cbm/h, filter area 373 sqm, 250 filter bags

An optical image measuring system Keyence is available. Measuring dimensions X/Y: 100mm/200mm, measuring accuracy at L/100: +/-2µm, camera: CMOS. Includes measuring stage/support table, calibration template, computer and accessories. Documentation available. An on-site inspection is possible.

Pero Washing Machine 2600/016GR.2W-4667

Cycle time: approx. 31s, machine dimensions X/Y/Z: approx. 2200mm/2400mm/2300mm, weight: approx. 1500kg, control: Siemens. An on-site inspection is possible.

FOBA Vario RPD50 VS1109/048 - Windows XP English / German - 1.4GHz 512MB RAM - Fobagraf 441-01 - EMC / IMP camera - New IMP LED's - Radiator type P313 - 2013 – new filters - HF 40W - PK used, year of construction 2011, 1.3MB, 10.5 W under the lens - 420 lens, deflection unit Raylase SS 10 - Z - 170mm and X axis 300mm - Turntables in pendulum mode, - Start via footswitch, possible via light curtain - Internal / FOBA PLC - Bulkhead = max. component height 150mm - Completely cleaned / serviced 19% VAT is shown, EXW, Commissioning, instruction, training possible on request

Offer 25468 Sheet metal – roll forming line for shelves Specifications: - Shelf width approx. 250 mm - Material thickness 1.25 mm - Roll forming unit with 16 roll stations - hydr. Punching unit - Straightening unit make DREHER -Mot. Reel CAMU Load capacity approx. 1.5 T -Control panel - Space requirement / footprint 14 x 1.5 m - Weight approx. 10 T

Labeling system PRINTWOLF from 2013 for glasses and small bottles (approx. 60ml - 250ml),, very good condition, 2 Collamat label dispensers for self-adhesive labels, Labeling of the front label (on the glass) also possible in two parts, labeling of the lid, PLC control (Siemens),, high-quality sensors, also detect black and transparent labels, Vacuum rewind belt with 2 different feed screws., Angular glasses (hexagon/octagon) can also be labeled, Labeling speed: 18 meters / min (about 80 glasses), Labeling accuracy: +/- 1mm, Supply: 400 V 50 Hz power approx. 1.5 KVA, Aluminum - stainless steel frame., The belt length of the machine is 3.97m., Separate control cabinet, Matching, additional packaging table with conveyor belt, The work table has dimensions of 1.20 x 2.32 x 0.94 m W/L/H (table top), The total length with tape overhangs is 3.20m, power: Labeling speed: 18 meters / min (about  ...

6600 mm Rexroth conveyor line Conveyor line with its own drive for the transport of workpiece carriers in the longitudinal direction or for the transverse transport of the workpiece carrier between parallel conveyor lines in conjunction with a lifting transverse unit for ejection from a longitudinal to a transverse section and vice versa. Manufacturer: Bosch Rexroth Voltage: 3 x 400 V 50 Hz (16 A) Control voltage: 24 VDC Pumped medium: Timing belt Belt section: 6600 x 500 mm Lifting cross unit: 500 x 430 mm Belt height: 990 mm More items - new and used - can be found in our shop! International shipping costs on request!

Key data: 48 KW, 60 kVA, 400 V

Execution: Category: Emergency Power Generator Stationary Aggregate type: stationary Design: Soundproofed Technical data engine: Engine manufacturer: Deutz AG Engine type: F 6 L 912 Motor power: 56 KW Cooling: Air-cooled Starting: Electric 12 V DC Speed: 1500 rpm Fuel: Low sulphur fuel oil Emission standard: TA-Luft Technical data generator: Generator manufacturer: Stamford Generator Type: S1L2-Y Generator power: 60 kVA Generator current: 86.40 amps Short-circuit current: 259.2 amps Overload: 95.04 amps Voltage 400 / 231 Volt Voltage regulator: yes electronic AVR Power factor: cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Version: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery set up Base frame tank with drip pan Capacity / litre: 1 ...

Used Trane FVCP06CWQ5R2WWBVWW fancoil unit on Glycol. The unit can be used for cooling and heating. Dimensions: 1410x240x560 mm (LxWxH). The fancoil unit has a cooling capacity of 4,8 kW at the following temperatures - air inlet temperature: 26°C & water inlet/outlet temperature: +7°C/+12°C. Trane FVC units are often used in: Apartments / Residential buildings Hotel rooms Offices / small workplaces Bedrooms / living rooms

A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible.

A self-built powder welding machine with a power source Kennametal and an MTA cooler for applying Stellite to valves is available. 1) Cooler MTA TAE EVO 10M, year of construction: 2013, cooling capacity: approx. 3kW, refrigerant: R407, filling quantity: 0.8kg, max. operating pressure: 28bar, flow rate: approx. 0.59m³/h. Machine dimensions X/Y/Z: approx. 600mm/600mm/800mm, weight: approx. 100kg. 2) Power source Kennametal Stellite PTA Junior Star, year of construction: 2013, open circuit voltage: 75V, welding current range: 10A/10V-250A/38V, protection class I. Documentation available. An on-site inspection is possible.

Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection poss ...