system nedermann used for sale

Oil-free wisAIR air compressor including refrigerated air dryer and air filter. Air compressor: - Max. working pressure: 13 bar - Capacity: 146.5 l/s - Motor power: 55 kW Stationary, single-stage screw compressor with water injection, driven by a speed-controlled electric motor. The compressor is enclosed in a soundproof housing. Condensate is drained automatically., Additional title: Oil-free screw compressor with refrigeration dryer and compressed air filter, Capacity: 8,79 m3/min, Max. working pressure: 13 bar, Motor drive: 5200 rpm, Power: 55 kW, Voltage: 400 V, Frequency: 50 Hz, Length: 2,60 m, Width: 0,97 m, Height: 2,00 m, Weight: 1195 kg, Features: Screw compressor; Refrigeration dryer; Compressed air filter

Air compressor including compressed air dryer and oil trap with oil-water-separator. air compressor: - volume rate of flow: 8,02 m3/min - stage pressures: 13 bar g - suction pressure: 1 bar - installed motor capacity: 45 kW, Additional title: Compressor with refrigeration dryer and oil separator, Capacity: 8 m³/min, Stage pressure: 13 bar, Suction pressure: 1 bar, Drive: 4250 rpm, Power: 45 kW, Current: 97 A, Voltage: 400 V, Frequency: 50 Hz, Length: 1,80 m, Width: 0,92 m, Height: 1,80 m

A compact, manual parts cleaning unit (brush wash table) IBS Scherer is offered, designed for the material-friendly cleaning of oil- and grease-contaminated metal and plastic parts. Max. load capacity: 50kg, Capacity: 50l, Working height: approx. 820mm, Working surface internal dimensions X/Y: 646mm/465mm, Weight: approx. 15kg, Machine dimensions X/Y/Z: approx. 656mm/475mm/1005mm. Inspection possible by appointment.

A Hegla glass cutting system will be available approximately from December 2026. Direction of travel: right-left, connected load: 35kW, max. glass sheet dimensions X/Y: 4600mm/3210mm, max. single glass thickness: 16mm, machine dimensions X/Y/Z: approx. 13200mm/6000mm/1000mm. The stops are worn. Documentation available. An on-site inspection is possible.

Used Diversey automatic CIP systemTechnical Specifications & Performance DataThis Clean-In-Place (CIP) system is designed to deliver reliable, repeatable sanitation for beverage production and industrial packaging processes. With three dedicated tanks and fully automatic operation, it streamlines cleaning cycles across process circuits, fillers, pasteurizers, and associated pipelines. The system’s electric heating ensures precise temperature control for effective caustic and rinse phases, supporting consistent hygiene standards on second hand and used bottling line installations.System type: Clean-In-Place (CIP)Year of manufacture: 2012Automation level: Fully automaticHeating method: Electrically heatedPower rating: 15 kWElectrical requirements: 380V / 50 HzNo. of tanks: 3Tank volumes: 2 x 1.0 m³ and 1 x 0.5 m³Total tank capacity: 2.5 m³Application: Beverage production and industria ...

Overview This Ishida IX-GA-4075-D X-ray inspection system was manufactured in 2008 and is designed for high-performance product inspection in food, beverage, and pharmaceutical production environments. The system is primarily used for foreign body detection, identifying contaminants such as metal, glass, stones, and high-density plastics that may not be detected by conventional metal detectors. In addition to contamination detection, the machine can also support product integrity checks, such as identifying missing components or estimating product consistency. The system is built with a robust stainless steel construction, making it suitable for industrial environments with high hygiene requirements. The inspection process is based on X-ray imaging, where products pass through the inspection chamber via conveyor. The system analyzes density differences in real time and automatically trig ...

This SCHÜCO ISOMAT 5 was manufactured in 2009. It features a robust machine construction, 10 lateral guide rollers, and a quick release mechanism on all guide rollers. Capable of processing profiles with depths up to 250 mm and heights up to 400 mm, it includes an ergonomically designed control panel and a safety cage for optimal operator safety. Reach out for more information.

Rotary transfer system with 8 processing stations for laser welding of sleeves, inventory no. 94012, with Trumpf laser unit, Trulaser HL 506 D, plus cooling unit for laser, welding dust extraction

A vapor phase soldering system IBL is offered for processing SMT printed circuit boards and electronic assemblies. Soldering format X/Y: approx. 530mm/330mm, max. printed circuit board format: 540mm/307mm/50mm, medium filling: approx. 15kg, water connection: 1/2 inch, min./max. water pressure: approx. 2.5bar/4bar. Dimensions: approx. 1190mm/1760mm/1320mm, weight: approx. 500kg. Inspection by appointment possible.

Already working with the Doka Edge Protection System XP? Then this accessory package is your next logical move.  With original Doka railing clamps and XP posts, you’ll expand your system exactly where it matters †whether it’s for additional sections, larger areas, or extra safety along the edges.  🔧 100% original Doka XP parts  📦 Ready for immediate delivery †incl. reusable packaging  💶 Full package for just €5,135.†(net)  This package is ideal for anyone looking to extend their existing XP setup quickly and efficiently †no extra planning needed. Everything fits. Everything works. Just like youre used to.    Expand now †before you hit the limit.  The accessories are ready †you just have to grab them. 😉  👉 Ask. Decide. Go.  Price: from € 4259,00 ...

🔒 SAFETY FIRST †Doka Folding Platforms K 4.50 m †strong. safe. ready. 🔒 When safety and efficiency matter on your construction site, our Doka Folding Platforms K 4.50 m are just what you need! 💪   These platforms deliver full performance across the board: 🔹 Ready for immediate use †pre-assembled for quick setup 🔹 Durable & reliable †galvanized steel and yellow-coated timber components 🔹 High load capacity †ideal for demanding applications 🔹 Space-saving when folded †perfect for transport and storage 📦   ✨ Built to perform †safe, inspected, and robust! 👉 Need more platforms or looking for a lower quality grade? No problem! We offer various condition levels to suit your needs and budget. Just reach out †we’re happy to help! 😊
 ...

🔩 Staxo 100 †Used Shoring Frames in Top Condition! 🔩   Looking for stable, reliable, and ready-to-use Staxo 100 frames ? You’ve come to the right place!  Our used, galvanized shoring frames in 3-star quality have been professionally inspected, cleaned , and are ready for action †with only minor signs of use but maximum performance!    Why choose our Staxo 100 frames? ✅ Integrated access ladders †climb with ease!  ✅ Non-removable connection elements †stack smartly!  ✅ Suitable for medium to high loads †built to perform!    Available in two sizes: 📏 1.20m †for maximum reach! 📏 0.90m †compact & powerful!   💡 Get your hands on quality-tested shoring frames with smart technology today!  👉 Questions? We’re happy to help! P ...

Doka diagonal braces in ⭐⭐⭐ quality provide reliable bracing for shoring scaffold frames and are an essential component for stable and secure scaffold structures. 💡 Key benefits at a glance: ✔ Quick and easy installation thanks to permanently connected diagonal members. ✔ Safe and fast attachment to the shoring scaffold with innovative locking pawls. ✔ Available in various lengths for frame spacings from 1.00 m to 3.00 m in 0.50 m increments. ✔ Clear length identification through color clips and embossed markings. ✔ Compatible with Doka Staxo 40 and Doka Staxo 100 shoring scaffold systems. ✔ Ideal scaffolding accessory for professional scaffold construction and demanding jobsite applications.   Whether you are looking to buy scaffolding or expand your existing shoring scaffold system, these Doka diagonal brac ...

Equipment: Hot melt system HHS Promelt consisting of: 4 channels with 2 application heads and bracket, hose length approx. 4m, preparation for HHS/KAS control cables, electric valves, system trolley. SN 4705 0410 001

Secure available PERI MX 100 x 240 concreting platforms for professional formwork, concrete construction, and infrastructure projects 🚀 These proven working and concreting platforms provide additional safety and efficiency on site and are an ideal addition to existing formwork systems 🔥   The offered PERI MX 100 x 240 concreting platforms are ideally suited for concreting operations, formwork work, and creating safe working areas on wall formwork and concrete construction projects. Thanks to their robust design, they offer versatile applications and support efficient site operations ⚡   The platforms are available in 1 Star and 2 Star quality and provide a cost-effective alternative to higher-graded material. Particularly attractive for companies that rely on proven PERI formwork components while maintaining a cost-conscious purchasing strategy  ...

dimension of workpiece: 400 mm voltage: V feed power: weight of the machine ca.: 1900 t dimensions of the machine ca.: 2,5 x 1,5 x 2,4 m module: 0,5 - 15 mm The KLINGELNBERG P 40 is a fully automatic CNC-controlled gear measuring center with a compact machine design. It was specifically designed for the lower workpiece diameter range up to 400 mm and is suitable for the precise inspection of a wide variety of rotationally symmetrical components. The measuring center can be used, among other applications, for the inspection of spur gears, shaving cutters, gear cutting tools, worms and worm wheels, hobs, and bevel gears. In addition, the machine is also suitable for general dimensional, form, and position measurements as well as for the inspection of camshafts, rotors, and similar workpieces. The P 40 features a rigid mechanical structure with machine bed, workpiece rotary drive, column w ...

The high-quality Doka Aluxo shoring tower saves time, reduces labor effort, and enables efficient work †even in hard-to-reach areas. Thanks to the lightweight aluminium frames, the aluminium shoring tower can be assembled quickly by just two people †completely without a crane. 🏗️   The robust Doka rental park quality stands out with high load capacity, maximum flexibility, and cost-efficient use on demanding construction sites. Ideal for companies looking for reliable used Doka formwork and professional shoring solutions.   ✔ fast assembly without crane support ✔ high safety standards on site ✔ flexible application possibilities ✔ reduced assembly time & lower labor costs   Also available: Doka screw jacks and Doka load-bearing jacks 70 for optimal height adjustment of your shoring tower.   Ϝ ...

Ref.Nr. 00922 Name of the Robolution system Robotic welding cell with screen Automated robotic welding system for cost-effective series production and reproducible welding quality. Manufacturer Robolution Model Robot Welding Machine Year of construction 2009 Condition Can be visited Note - - With control cabinet for Kuka robots - With control cabinet for entire cell - Spare parts are necessary on the Kuka arm, no new spare parts are produced, overhaul is possible – overhauled parts can be replaced - Kuka offers overhaul of robot spare parts, but no new spare parts, - Plant fully functional - Axes 5 and 6 have play - Kuka offered 6000 euros for the overhaul of the arms - All connections from the cell to control cabinets are disconnected - The control cabinets can be placed on pallets System with screen

🧣📦 Last chance for a smart site upgrade: The Doka cavity wall bracket 60 is now available in a clearance bundle †by pallet , fairly priced and ready to ship ! 💥 Whether you need a pouring platform , edge protection solution or system extension †this bracket is a perfect match for anyone using the Doka Xsafe XP system . Compatible. Durable. Cost-effective. 🔎 Why this deal makes sense: ✅ Compatible with Xsafe XP †a smart add-on for your edge protection system ✅ Versatile use †for pouring platforms and barriers on precast hollow-wall elements ✅ Galvanised finish †durable, resilient and immediately ready for use ✅ Sold by full pallet (10 pcs) †condition-based price tiers available ✅ Immediate availability †no waiting, no quote ping-pong ✅ Clearance pricing †sma ...

Manufacturer: Krones Model: Linatronic M, K735E02 Type of machine:empty bottle inspector Year of manufacture: 2015 Rated voltage: 400 / 230 V Current type and system: AC 3/N/PE Mains frequency: 50 Hz Full load current Ib max: 6 A Short-circuit strength: Icw 0.46 kA/1s Mains disconnecting device: Icw 0.46 kA/1s Backup fuse: 20 A Find more here - .ucymachines/ Contact us at - sales@ucymachines

💥 You’re working with the PERI bracket platform system MXK ? Then this offer is made for you: We’re selling a complete set of certified original PERI bracket decks †accurate fit, durable and ready to go. 💸 Perfect for anyone looking to buy PERI MXK plankings or upgrade their existing system. 🔩 What’s included: ✅ Original PERI parts †no replicas ✅ Lengths: 0.90   m | 1.20   m | 2.40   m ✅ Material: Aluminium-wood combination ✅ Certified and ready to use ✅ Safely bundled on transport supports 💡 Ideal for concreting and intermediate platforms with PERI MAXIMO. 💸 Total price: €1,699 †only while stock lasts. ⏳ First come, first build. Secure your package now †this offer won’t come twice. 🛒 Get in touch today and ...

A robot-assisted CLOOS welding system is offered. 1) CLOOS robotic welding system, wire feed speed: 30m/min, steel wire spool weight: 15kg, aluminum wire spool weight: 4kg, welding power source dimensions X/Y/Z: 1245mm/470mm/930mm, welding power source weight: approx. 190kg, wire feeder dimensions: 680mm/410mm/235mm, wire feeder weight: approx. 24kg. 2) CLOOS ROMAT 310 welding robot, payload: approx. 10kg, max. reach: approx. 1540mm, max. workpiece weight: approx. 3500kg, control system: CLOOS ROTROL II-D. 3) CLOOS WPV-DP-10000 N workpiece positioner, quantity: 2. 4) CLOOS GLC 503 Quinto welding power sources, quantity: 2. 5) CLOOS main electrical cabinet. 6) Welding fume extraction system. Including safety fence and peripheral equipment. Inspection possible by prior arrangement.

Cooling system Weidenreich BJ 2014

A mobile Munk + Schmitz vacuum blast machine is available. Blast head diameter: 103mm, blast nozzle diameter: 8mm, effective blast pattern width: approx. 30mm, pressure vessel volume: 60l, abrasive capacity metallic/non-metallic: 200kg/100kg, max. abrasive grain size: 1.6mm, filter area: 21m², dust separation efficiency: 99.9%, machine dimensions X/Y/Z: approx. 2050mm/750mm/2300mm, weight: approx. 550kg. An on-site inspection is possible.

Offered for sale is a Mycronic SMT placement machine. Max. placement capacity: 16000components/h, IPC net throughput: 13800components/h, placement system: HYDRA, placement tools: 8, max. component dimensions X/Y/Z: 56mm/56mm/15mm, max. component weight: 140g, min. PCB size X/Y: 70mm/50mm, max. PCB size with T3 X/Y: 443mm/508mm, min./max. PCB thickness: 0.4mm/6mm, max. PCB weight with T3: 5kg, feeder capacity with T3: 112 × 8mm feeder positions, conveyor height range: 880mm-975mm, operating hours: approx. 6871h, placement time: approx. 2983h. Machine dimensions X/Y/Z: approx. 2690mm/2229mm/1446mm, weight: approx. 1400kg. Inspection possible by appointment.

Manufacturer: Krones Model / Type: Linatronic 735 M2 Type of Machine: Empty bottle inspector Year of Manufacture: 2007 CAPACITY - Capacity: 39,600 bottles per hour ADDITIONAL EQUIPMENT - Glideliner, Akkutable, and some conveyor belts may be available Find more here - .ucymachines/ Contact us at - sales@ucymachines

An industrial Sartorius crossflow membrane filtration system is available. Membrane modules: 6, Membrane age: approx. 3.5 years, Filtration capacity range (white wine): 5000l-6000l/h, Machine dimensions X/Y/Z: approx. 2400mm/1300mm/2150mm. Documentation available. An on-site inspection is possible.

New UHT tubular strilizer, homogenizer, CIP system for milk & cream - 10.000 LhTechnical Specifications & Performance DataThis tubular indirect UHT sterilizer is engineered for dairy processing with variable-speed operation and high thermal efficiency. It delivers dependable ultra-high-temperature treatment for milk and 40% fat cream with robust heat recovery and precise temperature control across each process stage.Capacity: Milk 10,000 L/h; Cream 40% fat 5,000 L/hHeat exchanger: Tubular, corrugated AISI 316 stainless steel tubesProduct inlet temperature: 8°CHomogenizing temperature: about 65–75°C (intermediate outlet available)Holding temperature: 90–95°CSterilization temperature: 135–142°C for 4 sOutlet temperature: about 20–25°CHeat regeneration: about 70% on tubular exchangerThermal profile: Heating 5→115°C (pressurized hot water at 132°C), Sterilization 115→142° ...

A KL-Palettiertechnik high-level palletizer is available. Palletizing product: bags/sacks, palletizing capacity: 1800bags/h, bag size range: 5l-70l, pallet infeed height: 700mm, pallet outfeed height: 700mm, bag infeed height: 3300mm, max. layer dimensions X/Y: 1200mm/1400mm, max. stack height: 2400mm, pattern: 3/6/4/5, max. pallet dimensions X/Y: 800mm/1200mm, power: 32kW. Machine dimensions X/Y/Z: approx. 9400mm/4650mm/3300mm, weight: approx. 4000kg, HMI: Yaskawa, control retrofit: 2019. The system is dusty due to the production environment but, to the best of our knowledge, is fully functional. Documentation available. An on-site inspection is possible.

This is a fully automatic gluing system, solid wood panels, stair treads, window scantlings and beams can be produced. Wood length from 0.60 meters to 3.20 meters, thickness from 1.5 to 10 cm. The facility can be operated by 2 people. Depending on the thickness of the wood, 18 - 30 cbm can be processed. An area of 20 x 45 meters is needed for the plant. After the separation cut, the wood is glued into the width endlessly pressed, then the width and the individual lengths are sawn, rotated 90 degrees and then sanded from below and in the 2nd belt sander from above. The panels are thus ready for oiling or varnishing of your choice. The system only ran for a short time.

max. format 66 x 83 cm Year of construction 2008 Screen PT - R 4300 E CTP System for Thermal Plates 4 Sides Thermal Platesetter Autoloader Inline punching HD Autoplate / Bacher 425 mm Azura C 95 Processor Plate stackers Harlequin RIP Delivery date: Immediately

A complete central plastic granulate drying and conveying system Werner Koch, which was extensively expanded and modernized in 2021, is available. 1) Koch CKT 300 dry air dryer, year of manufacture: 2003, power: 41kW, air capacity: 300m³/h. 2) Koch CKT 500 dry air dryer, year of manufacture: 2021, power: 51kW, air capacity: 500m³/h, control system: Siemens S7. 3) 26x drying hoppers, volume: 11x40l, volume: 13x100l, volume: 2x150l. 4) 38x machine hoppers. 5) 2x Busch vacuum pumps. 6) Automatic Koch Navigator material distribution system, inputs: 26, outputs: 38. Including control cabinets and a central visualization and monitoring system Supervisione 9-7000. Documentation available. An on-site inspection is possible.

3-row layout Output up to 3,000 pieces of SQUARE or ROUND rolls p/h Weight range for square rolls approx. 40 – 150 g/piece Weight range for round rolls approx. 40 – 85 g/pc (incl. knitting drum 55/80gr) completely stainless steel clad with TOUCH computer control incl. div cutting rollers incl. 3 stamps / + # + sun with humidification and turntable sprinkling station Application: e.g. rustic rolls, shaped rolls, round rolls Ciabatta, cobbler's boys, mini baguette, etc...

A complete GEW UV curing system for a Gallus Labelmaster LM 440 is offered. Max. UV output: 140W/cm, UV lamp housings: 11, including 9 housings with lamps and 2 housings for screen printing modules, Operating hours: approx. 2900h/lamp, HMI: for 10 stations, Control system: GEW RHINO HMI. Including 2 RHINO control cabinets, 2 fans, a complete exhaust duct system and mounting kit for the Gallus Labelmaster LM 440. An on-site inspection is possible.

An industrial Hobart conveyor dishwasher is available. Heating: electric, conveyor width: 612mm, conveyor height: 440mm, working height: 920mm, conveying direction: left-right, total connected load: 81kW, water fill volume: 340l, water pressure range: 1.5bar-10bar, DI water consumption: 220l/h, DI water temperature: 12°C, water hardness: 3°dH, conductivity: 80µS/cm, total machine exhaust air: 1500m³/h. Machine dimensions X/Y/Z: approx. 7550mm/1200mm/2150mm. Documentation available. An on-site inspection is possible.

A customized industrial Sartorius crossflow membrane filtration system is available. Filtration process: tangential flow filtration, design: skid, contact points: steel, membrane housings: 5, filter housing volume: 17, max. operating temperature: 95°C, max. operating pressure: 6bar, connected load: 35kVA. The system has no prefilter. Documentation available. An on-site inspection is possible.

A customized industrial Sartorius crossflow membrane filtration system is available. Filtration process: tangential flow filtration, design: skid, construction: stainless steel, nominal capacity: 4000l/h, membrane modules: 24, membrane area: 12.5m²/module, total membrane area: approx. 300m², pore size: 0.2µm, max. operating temperature: 95°C, operating pressure: 3bar, connected load: 35kVA, control system: Siemens SIMATIC S7-300. The pneumatic valve islands were replaced in 2023. Documentation available. An on-site inspection is possible.

Used OLIVEROGAR filtration systemTechnical Specifications & Performance DataThis industrial filtration and liquid-processing system is engineered for reliable, continuous operation in beverage production and industrial packaging environments. Designed by Oliverogar, it integrates multi-stage filtration with robust pumping and piping to support a wide range of liquid clarification and polishing tasks. Its compact footprint enables easy placement within existing production areas and seamless connection to upstream and downstream equipment on a used bottling line or new installation.Manufacturer: OliverogarMachine type: Industrial filtration and liquid-processing systemAutomation: Fully automated, multi-stage operationConstruction: Stainless steel frame and process assembliesProcess components: Integrated stainless-steel filtration tanksFluid handling: Heavy-duty process pump and industrial ...

ICTP 2000, built 2010, with navigator RIP for windows 2000/2003/ XP, Dell Optiplex 760 hardware, CD manuals, cleaning kit, dongle and repro materials such as ifinisher, liguid dot reserve drying lamps, etc. In very nice kept condition. Available immediately. Can ship worldwide.

Qty. 1 Second-hand complete Combi PET filing line Complete KRONES COMBI PET filling line for Still water Capacity: 25 - 30000bph Year: 2006-2018

Dispersing system Manufacturer: IKA Maschinenbau Type DISPAX-REACTOR DR 3-13/4 Capacity: max. 20,000 litres/hour Technical specifications : Disperser for continuous operation. The maximum delivery pressure is 2.5 bar. Motor 18.5 kW, 3,000 rpm Mechanical seal is connected to the water. In the dispersion chamber there are three stators and rotors in the coarse-medium-fine gradation as standard. This combination can be varied as desired, both in order and in the degree of fineness.

A mechanized Kjellberg CNC plasma cutting system is offered. Cutting current range: 40A-200A, duty cycle: 100%, output power: 200A at 150V, lower operating point: 60A at 104V, material thickness range: approx. 3mm-60mm, maximum piercing capacity: approx. 30mm, applicable plasma gases: air, oxygen, argon/hydrogen mixture, nitrogen, suitable materials: mild steel, stainless steel, aluminium, electrically conductive materials. Dimensions: approx. 980mm/644mm/1320mm, weight: approx. 370kg. Inspection possible by arrangement.

Esta Chip Suction-SB 8151 Chip Suction Powerful industrial extraction system from the quality manufacturer ESTA, model Spänesaug-SB 8151. The system is ideal for workshops for the extraction of chips and dusts (e.g. in metal or woodworking). Technical specifications of the device Manufacturer: ESTA Apparatebau GmbH & Co. KG Model / Type: Chip suction-SB 8151 Voltage (volts): 400 V Power (kW): 2.2 kW Current (amps): 4.6 A Frequency (Hz): 50 Hz Degree of protection: IP 54 (dust and splash proof) More items - new and used - can be found in our shop! International shipping costs on request!

End-of-line X-ray scanner for professional foreign body detection,, Ideal introduction to state-of-the-art X-ray inspection,, easy integration into existing production lines,, comfortable user interface,, easy, fast and thorough cleaning,, Max Product, Height/width: See enclosed beam chart, Running direction: L->R, conveyor belt, height: 850 – 950 mm (adjustment range), Throughput: approx. 100 pcs/min (please contact us before submitting an offer), Degree of protection: IP 65, Sorting: using band-stop, Total length: 1,800mm, Bandwidth: 420 mm, Scan width: 400 mm, VPN access: yes, EKS: Yes, X ray lamp, Monitored yellow: yes, Light red: yes (active with FK detection), Statistics export: yes, Basic machine equipment, a) General machine data, • Industry scanner made of stainless steel with open profile, • Power supply connection:, o 110-230VAC / 50/60Hz / 1Ph I o approx. 2.2 kVA I o ap ...

Plasma Power Source Plasma Cutting Machine Manufacturer: Kjellberg Type: HiFocus 80i Year of Make: 2008 Power: 80A Cutting thickness: 0.5 to 25 mm Incl. hose package and burner Manual gas console

control: Dialog 4 type of control: CNC Fräsen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

basket dimensions: 0 control: 0 total power requirement: 0 kW weight of the machine ca.: 0 t dimensions of the machine ca.: m heating capacity: kW ELMA TI-H-10 Multi-Frequency Ultrasonic Cleaning Device ? Multi-frequency version with 35/130 kHz: 35 kHz for cleaning oils and greases from hard surfaces such as metal, glass, and hard gemstones. 130 kHz for cleaning delicate surfaces in jewelry and electronics. ? Degas function for effective degassing of the cleaning fluid ? Sweep function for optimal sound field distribution ? Adjustable ultrasonic power ? Special stainless steel vibrating tanks for robust use and long service life ? Timer for ultrasound, adjustable from 0-15 min. and continuous operation ? Heating control from 30-80°C Technical Data Mains voltage (Vac) 230V 1 Ph. / 1N / 1 PE Total power consumption (W) 1000 Effective ultrasonic power (W) 200 Maximum ultrasonic power (W) 8 ...

condition: gut sold only together as package: ja Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 6 Meter weight of the machine ca.: 1 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 250 mm table height: 100 mm 4-jaw-chuck diameter: 200 mm weight: 60 kg dimensions of the machine ca.: 370 x 500 x 210 mm - Serial-No.: 6568 - 4-jaw chuck RÖHM Ø 200 mm - Chuck optionally with 30° pitch, or infinitely variable 360° rotation - Chuck key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.