system nedermann used for sale

Refurbished cable granulation system for mixed cables. Insertion by hand directly into the shaft or automatically via a controlled conveyor belt. Also pre-equipped for networking with a pre-shredder. Cutting unit with segment knives for low power consumption and good material digestion. Pre-equipped cooling of the cutting unit. Clean copper granules by inverter-controlled separator. Immediately available. The machine can be viewed and tested. more information at Recyclinganlagen.info

Little used mixed cable recycling plant. Workshop tested with 12 months used equipment warranty. Insertion by hand directly into the shaft or automatically via a controlled conveyor belt. Also pre-equipped for networking with a pre-shredder. Three-blade rotor system, for higher hourly output. Pre-equipped cooling of the cutting unit. Clean copper granules by inverter-controlled separator. Immediately available. The machine can be viewed and tested. more information at Recyclinganlagen.info

As good as new cable pelletizing system for mixing cables up to approx. 120 kg/hour. Demo machine from stock with 24 months warranty. Insertion by hand directly into the shaft or automatically via a controlled conveyor belt. Also pre-equipped for networking with a pre-shredder. Three-blade rotor system, for higher hourly output. Pre-equipped cooling of the cutting unit. Clean copper granules by inverter-controlled separator. Immediately available. Pictures will follow. The machine can be viewed and tested. more information at Recyclinganlagen.info

Small cable recycling plant for 80 to 100 kg/hour. Built in 2012, workshop checked and tested. Only 6 kW connected load. 3-fold separator adjustment for clean copper granules immediately available. The facility can be visited and tested. More information at Recyclinganlagen.info

This 3-axis EROWA Robot Easy Automation was manufactured in 2007. It features a maximum load capacity of 1500 kg and a magazine plate with 6 positions per level. The machine has a Z-axis travel of 75 mm and an M-axis capable of 360° movement. If you are looking to get high-quality automation capabilities, consider the EROWA Robot Easy Automation system we have for sale. Contact us for further details.

dimensions 820x540x70 capacity 1 to daylight 2337 mm

A compact FIC/Rivacold chiller is available. Usable volume: 410l, cooling capacity: 33.7kW, compressor: S15-52Y, compressor power: 15HP, tank load capacity: 725kg, refrigerant: R404A, cooling tower water consumption: 9.3m³/h, cooling unit water consumption: 3.6m³/h, machine dimensions X/Y/Z: approx. 750mm/1600mm/1900mm. Documentation available. An on-site inspection is possible.

Inv. Num. : 9266 Type: DUAL BATCH 40 Producer: Ecoenerg Created: 2022 Parameters: Weight of one batch: 2 x 50 kg One cycle: 4-6 min

TECHNICAL DATA: Machine type: Four Side Seal, Transverse Zipper Sealed, Side Seal Pouch Making Machine Application: production of high-quality laminated flexible packaging pouches with zipper and punching options. PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3" and 6" Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Inst ...

A Bullmerwerk fabric spreading machine including a Wastema band knife cutting machine is available. 1) Bullmerwerk fabric spreading machine, ESV20-160, max. fabric width: 1800mm, table length range: approx. 9500mm-13500mm, table width range: approx. 1800mm-2000mm, max. ply length: approx. 11000mm. Year of manufacture: 1985. 2) Wastema band knife cutting machine, cutting height range: approx. 250mm-300mm, throat depth range: approx. 750mm-1270mm, band knife speed: approx. 16m/s, weight: approx. 300kg. 3) Rietschle SKG 226-2.02 vacuum unit, year of manufacture: 1984. The system including 3 pieces km Mack KS-AU-V, speed: 3000/3600 rpm. Inspection possible by arrangement.

Trumpf TruLaser Robot 5020Year of manuf. : 2010 ____________Description:TruDisk 3302 laser system:- TRUMPF TruDisk 3302 with a beam quality of 8 mm mrad:- Output power of 3.3 kW at the workpiece:- Laser system with 1 cavity:- Beam delivery system comprising an optical assembly for a single optical path, a fast switch (50 ms switching time) and a pilot laser including electrical control:- Integrated power supply and real-time capable control system for the evaluation and visualisation of operational data:- Fast laser power control:- TruControl 1000 control system:- Storage capacity for 199 laser programmes:- Safety monitoring in accordance with laser safety class 1, including a central safety lock:- Protection class IP54:- 10.4 panel computer with TFT touchscreenExtension of the beam path:Plus 1 additional laser light cable output, including interface card:consisting of::# Optical a ...

Messer MultiTherm 4000Year of manuf. : 2020 ____________Description:Technical specificationsWorking surface:2000 mm x 15000 mmTotal width:5070 mmHeight:1980 mmequipment:-Global Control S with 15 colour touchscreen:-Joystick and handwheel for Global Control S panel:-Cooling for the control cabinet:-Laser diode:-Drives up to a maximum of 35 m/min. AC:-Heat shield without air cooling:-Runway for double-sided longitudinal drive HEB:-OmniFlow oxyfuel supply up to 70 m/h (gas flow control):-ALFA machine cutting torch (internal ignition):-Smartlifter 300:-SensoMat ARKI:-Full addressing of gases:-Light barriers:-Safety device for wheel housing (foot switch)

Manufacturer: MYCRONIC Model: My600 JP Year of Manufacture: 2024 The MY600 represents the top of jet-printing technology, enabling precise and fast solder-paste deposition for demanding electronics manufacturing. The machine is ideal for modern production lines with high quality requirements. Holder Units Not included Ejector Not included Auto Repair YES Glue option/SMT adhesive Can be upgraded (ejector variant) High speed Can be upgraded Shared databases Yes Board indexing Can be upgraded Fine pitch Can be upgraded Software: Latest version, which can be installed during setup FLE or Jpcam FLE can be provided My Center Can be provided Find more here - .ucymachines/ Contact us at - sales@ucymachines

Oil cooler, air-oil cooler, heat exchanger unused. Manufacturer: SEW Type: OAC1 50-710 Year: 2020 Permissible. Temperature: 90 °C Capacity: 42 l Cooling capacity at 40°C air / 70 °C oil: 27.7 kW 380 V Pump KRACHT KF 50 68.2 l/min at 1500 rpm 4 kW Fans 1.1 kW 940 rpm Dimensions approx. 2100 x 1500 x 1200 mm Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Laser system for particle size analysis Manufacturer: Mettler Toledo Type Lasentec_S400Q Consisting of: FBRM S400Q Control Station 2 pieces of probes PC with FBRM Control Interface Software Documentation including certificates, Software and various accessories FBRM® [Focused Beam Reflectance Measurement] is a quantitative real-time measurement that tracks the rate and degree of change in particles, particle structures, and droplets as they are actually present in the process. In-line FBRM measurement® allows engineers to quickly link the dynamics of the particle system to the processing conditions. Measure particles and droplets in real time DescriptionSample OD: 9.5 or 14mm Probe length: 91 or 206mm Drive: Electric Bearing: Mechanical Lab/Plant: Lab Field unit: Stand-alone Temperature range: -20 to 90°C (standard); -90 to 120°C (optional) Pressure: 10 bar (stan ...

€ 2950 net Diatomaceous earth filter from MAG, Made in Germany 3sqm, top condition. Filter area 3 sqm, horizontal screens, residual filtration, product pump. Complete with stainless steel dosing tank. Illuminated sight glasses, integrated agitator, adjustable dosing pump. Ready to use.

A complete PVD hard coating system including peripheral equipment is available. 1) PVD hard coating system Platit Pi111 Plus G3, year of manufacture: 2023, deposition process: ARC, cathodes: 2, targets: 2, max. coating diameter: 353mm, max. coating height: 498mm, max. load: 160kg, max. workpiece diameter: 355mm, machine dimensions X/Y/Z: approx. 1950mm/1600mm/2250mm, control system: Platit. 2) Screw compressor Almig F-Drive 22, year of manufacture: 2022, flow rate: 4.14m³/min, final pressure range: 5bar-13bar, motor power: 22kW. 3) Compressed air receiver OKS, year of manufacture: 2023, volume: 1000l, operating pressure min./max.: 0bar/11bar, test pressure: 16bar. 4) Blast cabinet MHG SMG50, year of manufacture: 2024. 5) Osmosis Pro water filtration unit. Documentation available. An on-site inspection is possible.

Including:, Goedhart BV evaporator, Type: LLK.s 411m², Year of construction: 2010, Capacity: 135 dm³, Refrigerant: NH3, Working pressure: 22 bar, Test pressure: 32 bar, Weight: 770 kg, Belt width nett: 940 mm, Tiers: 3, Belt length: 5800 mm, Power: 3 x 380V, 50Hz, 0.37kW, Dimensions: 7200 x 1400 x 2900 mm, Weight: 2850 kg

Offered is a Ruma cleaning centrifuge system with cooling unit and pump system for cleaning cooling lubricants, grinding oils, emulsions, wash water and process fluids. Max. achievable cleanliness level: approx. 1µm, suitable media: oils, emulsions, cooling lubricants, wash water, process fluids, max. rotor speed: 3620rpm, rotor diameter: 310mm, max. solids capacity: 12kg, main motor power: 2.2kW, filter aids: not required, separation principle: solid-liquid separation by centrifugal force. Machine weight: 400kg. Documentation available. Inspection possible by arrangement.

An automatic Weil tube welding system with rounder, tube transfer, end processing and Trumpf TruFlow laser unit is available. Tube diameter range: 80mm-250mm, material thickness range: 0.4mm-1mm, max. tube length: 1000mm. Documentation available. An on-site inspection is possible.

AGFA Avalon N 36-50 (Screen PT-R 24000 S) - VLF year 2013 size 2100 x 1600 mm plate processor G&J Quartz III 150 Bridge Stacker in stock

A compact Vomat fine filtration system for grinding oil and coolant with full-flow filtration using the backflushing process and a cooling unit is available. Filtration capacity: 240l/min, Filtration fineness: 3µm-5µm, Filling capacity: 500l, Machine dimensions X/Y/Z: approx. 1600mm/1000mm/1200mm, Weight: approx. 500kg. Documentation available. An on-site inspection is possible.

Stock number: D1245, In stock: Yes, Amount in stock: 1 pc., Item: Non-driven roller conveyor - Flexi conveyor, Standing: On wheels , Castors: Breakable in direction of travel and rotation, Rollers: Ø 48 mm wheel axles - 8 wheels per axle, Dimensions: L 1150/4000 x W 400 x H 695/995 mm, Manufacturer: SOCO SYSTEM A/S, Type: Flexi conveyor

A compact Vomat fine filtration system for grinding oil and coolant with full-flow filtration using the backflushing process is available. Filtration capacity: 120l/min, Tank capacity: 500l, Filtration fineness: 5µm, Machine dimensions X/Y/Z: approx. 1600mm/1000mm/1200mm, Weight: approx. 500kg. Documentation available. An on-site inspection is possible.

Bodor AQU3000 Handheld Laser Welding Machine – 3000 W For sale is a Bodor AQU3000 laser welding machine with 3000 watts of laser power. The device is located in Germany and is available immediately – no long delivery times or waiting times for an import. The welding machine is still in its original packaging. The AQU3000 combines welding, cutting and, if necessary, cleaning in one compact system. Modern fiber laser technology achieves high-quality weld seams with low distortion and significantly reduced post-processing effort. Compared to classic MIG and TIG methods, significantly higher working speeds are possible. Technical data: Manufacturer: Bodor Model: AQU3000 Laser power: 3000W Fiber cable length: 10m Operating voltage: 380 V Cooling: Water cooling Welding thickness mild steel: up to 8 mm Welding thickness stainless steel: up to 8 mm Cutting fun ...

A compact Vomat fine filtration system for grinding oil and coolant with full-flow filtration using the backflushing process and a cooling unit is available. Filtration capacity: 240l/min, Filtration fineness: 3µm-5µm, Filling capacity: 500l, Machine dimensions X/Y/Z: approx. 1850mm/1250mm/1550mm, Weight: approx. 500kg. Documentation available. An on-site inspection is possible.

A solvent cleaning system AMA Universal is offered for cleaning, degreasing and drying metal and plastic parts. Inspection by appointment possible. Number of monitoring channels: 8, Solvent fill quantity: approx. 160l, Solvent weight: approx. 194kg, Tank volume: approx. 105l, Max. basket load: 80kg, Cycle capacity: up to 80kg/cleaning cycle, Cycle time: approx. 20min, Working chamber diameter: approx. 450×610mm, Loading opening diameter: approx. 450mm, Drum diameter: approx. 510mm, Drum depth: approx. 600mm, Air flow rate: 230m³/h, Steam pressure: 5bar, Steam temperature: 149°C, Water pressure range: 3-5bar, Compressed air connection: 6-7bar, Control: PLC. Inspection by appointment possible.

A compact Vomat fine filtration system for grinding oil and coolant with full-flow filtration using the backflushing process is available. Filtration capacity: 120l/min, Tank capacity: 500l, Filtration fineness: 5µm, Machine dimensions X/Y/Z: approx. 1600mm/1000mm/1200mm, Weight: approx. 500kg. Documentation available. An on-site inspection is possible.

STEIMEL Chip Conveying and Deoiling Plant with Deoiling Centrifuge – Complete Centrifuge Plant Used complete system – ready for operation – inspection possible during operation – fully functional For sale is a complete and fully functional STEIMEL chip conveying and deoiling system, which is currently still being used in series production. The plant was used exclusively for the conveying and deoiling of brass chips and is sold exclusively due to a plant modernization. It is a continuous continuous centrifuge. A particular advantage for prospective buyers: The plant can be visited during ongoing operation before the expansion. Technical drawings and documentation are available. Dismantling is scheduled for October 2026. The system is ideal for companies in the machining and metalworking industry that are looking for a reliable and economical solution for chip disposal  ...

A stationary Rippert filter and dust extraction system is available. Filter sections: 4, Filter elements: filter bags, Filter bag dimensions 1 X/Y: 6603mm/1775mm, Filter bag dimensions 2 X/Y: 6603mm/1200mm, Filter area 1/2: 45m²/60m², Regeneration drives: 4, Regeneration drive power: 1.1kW, Rotary valve: ZS 7.5, Motor power: 0.55kW. An on-site inspection is possible.

A Schirmacher high-frequency sliding-table welding machine is available. Table dimensions X/Y: 750mm/550mm, max. pressing force: 20kN, generator output: 10kW, operating frequency: 27.12MHz, control system: Siemens. Documentation available. An on-site inspection is possible.

Platesize 1422 x 1804 mm, upgradable up to 1600 x 2083 mm, High-Z-Speed thermal laserhead technology, APL / 2 segments (right-eject), Inline 2 point punch units, Interface to online processor, Open workflow connectivity for direct and 3rd party 1-bit-TIFF connectivity, Under Premier fullservice maintenance contract, Available from currently plugged-in live operation - standby for worldwide shipping, Specified service bundle for dismantling and worldwide transport-ready export packaging, Available at short notice, price on request

An entire system is being sold! The collection consists of Tango tapping, Ilapac Carrera 500 PC flow-wrapping machine, Mettler Toledo Chekweight and Espera labelling. The system is fully functional and serviced

Manufacturer: Durst Type: D-SLK 12 Diagonal, AIRSEC Vario 1/2 Year of manufacture: 2008 Heating medium: liquid gas propane, gas blower burner for natural gas E Dimensions - Spray cabin interior: 4000 x 2400 x 2550 mm - Container exterior overall: 6000 x 2500 x 2800 mm - Aggregate room interior: 2400 x 1850 x 2300 mm Air Performance - Fresh air supply: up to 10000 cubic meters per hour, motor rating 2.2 kW - Exhaust air: up to 10000 cubic meters per hour, motor rating 2.2 kW - Air change rate: up to 408 times per hour - Exhaust discharge velocity: approximately 14.1 to 17 m per second Heating - Maximum heating output: 90 kW - Maximum circulating air temperature for drying: up to 75 to 80 degrees C - Average annual natural gas consumption: approximately 3.4 Nm3 per hour - Maximum consumption at 90 kW: approximately 9.5 Nm3 per hour Filtration - Pre-filter: bag filter, filter cla ...

Fortuna Primus K4 – Roll line 4 rows – Stüpfler + deposition + GEK Year of construction 2011 Dough part & knitting machine Condition: fully functional, directly from operation Use: Round rolls e.g. Kaiserweck, plait, Salzweck, wheat & mixed dough • Weight range: approx. 40-110/120 g • Hourly output: approx. 4,800 pcs./h • Effective room height: approx. 10–35 • Casting speed: Scale 0-30 • Hopper volume: 20–25 kg • Dough yield: TA 160–165 • Connected load: approx. 1.5 kW • Machine weight: 650–700 kg • Settlement: for 60×80 cm trays (58–78) _____ Facilities • Fortuna Primus K head machine • 4 rows • GEK pre-proofer to match the line • Stüpfler/Stempel Sets: Kaiserbrötchen, Zopf, Salzweck • Complete cancellation • Immediately ready for use • In use until the end • Clean, well-maintained, regularly serviced • No  ...

- Electrical control see PDF file provided for download - Layout plan see JPEG image - Building freedom is given - Deployment of the system is unproblematic from a spatial point of view Control: Siemens S7 Tanks: 3 x 500 ltr Lye tank 500 ltr.: insulated/heatable Acid tank 500 ltr.: with adjustable spherical feet Buffer tank 500 ltr.: with adjustable spherical feet Location: Bavaria/Upper Franconia Dismantling: by buyer or at extra cost Media segregation: by buyer Material: Stainless Steel Original price: €41,000.00

This Anthracene and Carbazole Purification Plant is a complete industrial rectification and crystallisation system for the production of purified carbazole and anthracene from crude anthracene.The plant offers high-purity output with a design capacity of 2,600 tonnes per year of carbazole and 3,600 tonnes per year of anthracene, making it a proven solution for buyers of used chemical purification equipment. Manufacturer: NJR Type of Machine: Anthracene and Carbazole Purification Plant Design Capacity: - 2,600 t/a Carbazole - 3,600 t/a Anthracene Output Quality: - Purity of Carbazole: greater than 97.0% - Purity of Anthracene: greater than 95.5% Production Process — Three Steps: - Step 1: Crystallisation - Step 2: Rectification - Step 3: Solidification (Granulation) Process Description: - Crystallisation: Static layer crystallisation, 3-stage process. Cooling plates suspended  ...

Spray System spray.xact food 1000 mm Spray Grease System Precise, cost-effective, and highly reliable: Meet spray.xact, the next generation of contact-free spray lubrication. Designed for ultimate flexibility, this system applies oils and other media with pinpoint accuracy using a high-frequency valve and a single-substance nozzle. Unlike traditional compressed-air systems, spray.xact eliminates unwanted oil mist entirely—meaning you can skip the expensive extraction systems. The result? A low-wear, low-maintenance, and highly economical solution perfect for stamping, forming, fine blanking, and rolling mills. Technotrans offers tailored configurations to fit your exact needs: - spray.xact b: A flexible, modular design built for easy retrofitting in tight spaces. - spray.xact c: A compact, highly service-friendly unit enclosed in a robust stainless-steel housing. Both configuratio ...

The repackaging system is used to unpack glass bottles from pallets containing full module boxes, repackage them into ‘open basket’ carrier boxes holding four bottles, and repack them into pin-partition crates with palettising. The system consists of the following individual machines: 1. Depalletising of full module crates / repalletising of empty module crates: Here, pallets containing full module crates are fed in and destacked, whilst empty crates are stacked and transported out. 2. Repackaging machine: Here, 20-unit module boxes are unpacked, 4-unit carrier cartons are unfolded and filled with bottles/packed. 3. Packing into pin-partition crates and palletising: Here, the 4-unit carrier cartons are packed into pin-partition crates, stacked onto pallets, and transported out of the system., Additional title: Repackaging of full pallets containing modular crates into pallets contain ...

Yeast cultivation with dampable wort sterilization tank designed for an operating pressure of 2 bar and a capacity of 2.47 hl, a second heatable and coolable wort sterilization tank designed for an operating pressure of 2 bar with a capacity of 12.7 hl, and a yeast propagation tank with a capacity of 55 hl, permissible operating pressure of 2 bar and jacket cooling in the lower third (without cone). All tanks are equipped with an agitator. Also includes a CIP tank. The plant is controlled via a Steinecker control cabinet (time-controlled). The tanks are also available individually, Additional title: with switch cabinet and CIP tank, Features: 2 tanks for wort sterilization with stirring unit (approx. 2,4 hl and approx. 12,7 hl), control cabinet, 1 cylindro-conical tank with stirrig unit, CIP system

Complete vacuum evaporation system type SchoKo, with: -Expansion evaporater/vacuum tank -steam condensator -different pumps and fittings, Additional title: vacuum evaporation system, Knockout capacity: 13000 l, Volume of vacuum tank: 1471 l, Length: 2006 mm, Width: 2006 mm, Height: 2503 mm

Complete mixing tank system comprising three vertical pressure tanks, each with two cooling zones, frame insulation, a bottom-entry agitator and various fittings. One of the tanks is also equipped with a CO₂ gas injection unit and a pump for tangential feed. A pipe fence, pipe panel, control cabinet and various measurement and control equipment and pumps complete the system., Additional title: Insulated, coolable stainless steel pressure tanks as a mixing system with proce, Volume: 33000 l per tank, Max. pressure: 2 bar, Pump capacity: 28 m³/h, Operating temperature: 40 °C, Length: 2600 mm, Width: 2600 mm, Height: 8500 mm, Weight: 3900 kg, Operation / Control: Rush-Flow-Dosing: SPS-Typ = C7-633, HMI = ProTool, Material: stainless steel 1.4301, Position: free standing, Base construction: Cylindrical tank with dished ends and pipe feet on spherical caps, Features: 2 zone frame cooling, ...

Malt milling with 4-roller grist mill, Additional title: 4-roller mill with conditioning and malt transport, Capacity: 4 t/h, Operation / Control: Siemens Simatic S7-300, Features: 3 x silo discharge, small; 4 x silo discharge, large; malt transport; blower; malt scales; malt conditioning; malt mill, 4-roller; control cabinet and control system

Stainless steel brewing vessel as a wort kettle and whirlpool combination with an external boiler., Additional title: brew vessel from stainless steel, Total volume: 260 hl, Diameter approx.: 3 m , Diameter incl. insulation approx.: 3 m, Frame height: approx.: 2 m, Width: 3,4 m, Material: stainless steel 1.4301 (AISI 304), Base construction: on stainless steel pipe supports, ground pegged, Features: external boiler, conical hood stainless steel, D = 3200 mm), conical insulating hood (stainless steel outside diameter = 3400 mm), 2 outlets DN200 und DN100, manhole DN600, outlet vent (12000 mm), interior lighting

Kieselguhr dosing system for beverage filtration. Consisting of a mixing tank, pumps and various other components., Additional title: Dosing system comprising a mixing tank, pumps and other equipment, Capacity: 25000 l/h, Vessel volume: 500 l, Power: 2,42 kW, Voltage: 220/380 V, Frequency: 50 Hz, Material: stainless steel, Position: vertical, Features: agitator, sight glass, level indicator, precoat pump (80 hl/h against 2 bar), piston metering pump (36 hl/h against 8 bar), hinged lid, carbon dioxide fumigation, dust extraction device

System for the secondary filtration of beer after the Kieselguhr filtration., Operating pressure: 10 bar, Operating temperature: 140 °C, Volume: 169 l, Length: 4,10 m, Width: 1,30 m, Height: 2,0 m, Weight: 1700 kg, Material: stainless steel, Position: standing, Base construction: Frame, Features: Trap Filter, Beer filter, Water / CIP Filter, Unit for filter flushing and chemical regeneration.

() is equipped with an insulated - and is ideal for industrial cooling processes. It has two powerful fans and integrated piping and controls. The coolant is glycol, and the refrigerant used is R-410A. The system offers a cooling capacity of 14 kW at an . () . (). The 5.5 kW electric motor operates at 380–415 V, 50 Hz, and 20 A current consumption. This compact unit enables efficient, reliable cooling in industrial processes. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: externally mounted cooling unit with glycol buffer storage tank, Cooling capacity: 14 kW, Pressure compressed: 4,2 bar, Pressure relaxed: 1,9 bar, Gross volume glycol buffer tank: 400 l, Power: 5,5 kW, Current: 20 A, Voltage: 380-415 V, Frequency: 50 Hz, Features: Cooling unit with 2 fans, glycol storage tank, piping, control system

NH3 refrigeration system for cooling glycol and brewing water, consisting of the following components: - NH3 separator brewing water 890 l (T0 = -0.5°C) - NH3 separator glycol 647 l (T0 = -6 °C) - 3 x piston compressors (Bitzer type W4GA) - 2 x brewing water pumps - Plate heat exchanger as brewing water cooler Q0 = 200 kW - Evaporation condenser - Water tank approx. 470 hl - Glycol tank 80 hl + 2 x glycol pump - Plate heat exchanger as glycol cooler Q0 = 100 kW - High pressure collecting vessel 830 l - Danfoss frequency inverter type VLT HVAC, Additional title: NH3 Cooling plant, Cooling capacity Q0 brew water: 200 kW, Cooling capacity Q0 glycol: 100 kW, Evapotation temperature t0 brew water cooling: 0 °C, Evaporation temperature t0 glycol cooling: -6 °C, Current: 185 A / 250 A, Features: 2 x NH3 separators (t0 = -0.5 °C; t0 = -6 °C); 3 x piston compressors; 2 x brewing water pumps ...

Ice water generator for cooling supply of wort cooler (2nd stage), fermentation cellar (= 100 hl capacity), storage cellar (= 320 hl capacity) and pressure tanks (= 260 hl capacity) in a microbrewery with 20 hl output., Additional title: Ice water generator, Cooling capacitry: 14 kW, Power: 6,2 kW, Length: 1600 mm, Width: 1600 mm, Height: 1800 mm, Position: free standing, Base construction: cylindrical tank with refrigeration unit on top, on square tube frame with domes, Features: insulated stainless steel tank with side cover, semi-hermetic reciprocating piston compressor, copper tube coil exchanger, control box, cooling water pump

Extraction system for removing dust from the ambient air. The motor drives a fan impeller, creating negative pressure. The air is sucked into the machine via the intake manifold and reaches the filter elements. The treated air is then blown out again., Additional title: Workshop dust extraction, Nominal flow rate: 1400 m³/h minimum flow rate: 1,108 m³/h, Power: 2.2 kW, Current: 5 A, Voltage: 400 V, Frequency: 50 Hz, Base construction: on a mobile frame, Features: 140 mm intake manifold; air filter (category C el. lt.); asynchronous motor (manufacturer EMGR)