system nedermann used for sale

A complete gray fabric preparation and further processing line with butt seam sewing machine as well as an automatic double, folding and measuring system from MontiMac Italy is available. 1) Gray preparation line MontiMac model 1090, year of manufacture: 2013, material: cotton, fabric width range: 1800mm/3000mm, seam type: butt seam, material feed: pallets/bales, max. roll diameter: 500mm, sewing unit: TA21-3FY, cleaning brushes: 2. Including inspection table, brush cleaning unit, dedusting and fabric outlet. 2) Super automatic double, folding and measuring machine MontiMac Lafra 200TDD with pallet based design, double triangle usable width, machine usable width: 1600mm, max. fabric package folding height stacking height: 2000mm, max. table load: 1500kg. Including fold counter, control measuring system and length counter. 3) Butt seam sewing machine MontiMac TU03/105 with movable frame.  ...

Herding Extraction System COMP 1500-8/9 SB Manufacturer: Herding GmbH Filtertechnik Model: Herding COMP 1500-8/9 SB Year of manufacture: 2018 Type: Industrial Extraction System / Filter System Air volume flow: 2000 m³/h Weight: 1000 kg Control: Herding MP 12 Filter cleaning: pneumatic pulse cleaning Machine ID: 28694 Machine ID: 28695 CE marking: available Number of units: 2

Para. Annex Stool PolytechnikType MultiStar JP5 Year of manufacture 2012 Vol.20.000 m³ Motor 30 KW with briquetting press BrikStar c-3 18 Negative pressure

Lift system, Megamat, 170kg / shelf, approx. 6m high, – used - : Ex-site price: 14.500.- € (net), plus dismantling etc. Manufacturer: Megamat Type: Megalift 14448/25/6010 Year of Make: 2000 Max. load capacity per shelf: 170kg Max. total load capacity 18,000kg Dimensions per shelf: approx. 2.45m x approx. 0.80m Number of shelves: approx. 40 pieces Device dimensions: Height: approx. 6.01cm Width: 2.76m Depth: approx. 2.70m 3/N/PE 230/400V 10A, Fuse 16A Condition: good Available: immediately Location: BG-8800 Sliven

A Datron dosing and dispensing system for adhesive and sealing materials is available. Design: gantry design, Y-axis drive: double-sided, travel X/Y/Z: 520mm/650mm/240mm, gantry clearance: 200mm, dosing and positioning speed: 16m/min, repeatability: +/-0.02mm. Machine dimensions X/Y/Z: approx. 1300mm/1300mm/1950mm, weight: approx. 600kg. Documentation available. On-site inspection is possible.

Kohler Power Wave 5000TP UPS System 2014, capacity of UPS - 25 kVa, inclusions 46 batteries, serviced from new by Uninterruptable Power Supplies (a Kohler company)

ABB Power Wave 33 UPS System 2014, capacity of UPS - 400 kVa, inclusions 100 batteries, serviced from new by Uninterruptable Power Supplies (a Kohler company), Two systems in stock

Schneider GVXI1000KH UPS System 2018, capacity of UPS - 640 kVa, inclusions 205 batteries and 3 power modules, serviced from new by Uninterruptable Power Supplies (a Kohler company)

Based on the nameplate you provided and the technical data for the S3088 SPI (Solder Paste Inspection) variant, here are the key specifications for your machine: PCs replaced in 2024 to new ones Core Inspection Capabilities The S3088 SPI is a specialized high-performance system designed to detect printing defects immediately after the stencil printer. - Inspection Scope: Analyzes solder paste deposits for volume, height, form, area, displacement (X/Y offset), and smearing. - Component Compatibility: Capable of inspecting demanding assemblies with CSPs, micro BGAs, and pad sizes down to 01005. - 3D Technology: Uses a fringe projection process for precise 3D height and volume measurement. - Inspection Speed: Up to 80 cm²/s (depending on resolution settings). --------------------------------------------------------------- Technical Specifications (from your Nameplate & Records) Featu ...

The Viscom S3088 ultra gold is a high-performance 3D Automated Optical Inspection (AOI) system designed for high-volume electronics manufacturing that requires maximum throughput and precision. PCs replaced in 2024 to new ones Top Performance Specs - Inspection Speed: Up to 65 cm²/s, making it ideal for the highest throughput demands. - 3D Sensor Technology: Powered by the XMplus high-performance camera module. - Camera Configuration: Features up to 9 cameras (including orthogonal and angled views) for shadow-free 3D inspection. - Image Field Size: $50\text{ mm} \times 50\text{ mm}$. - Resolution: High-resolution 3D analysis down to 10 µm (orthogonal) and 0.5 µm (Z-axis). --------------------------------------------------------------- Key Technical Capabilities - Component Range: Reliably inspects the latest miniaturized generations, including 03015 components. - Defect Detection ...

A Rösler continuous belt shot blasting system is available. Rated power: 72kW, abrasive filling quantity: 1500kg, blasting capacity: 600kg/min, blast wheels: 4, blast wheel type: H28HM, total system dimensions X/Y/Z: approx. 12400mm/3800mm/2300mm, max. single component weight: 6000kg. Documentation available. An on-site inspection is possible.

Höcker Polytechnik extraction system Year of manufacture: 8/2000 CE 3 chip collection barrels Fan Type SV 25/220 Motor 5.5 kW Volume flow 3890 m³/h Pressure increase 2500 Pa Motor vibration 0.18 kW Rotary valve 0.37 kW PLC control Emergency stop shutdown Level monitor very good condition because little used

Qty. 1 Second-hand pallets rack storage system Mfc.: STAMH GROUP Type: 65 Lanes Built: TBA Dim. of pallets: 1.0 x 2.0 x 1.4 m – W x L x H Pallet Weight: 120-600 kg Gravity Roller Conveyor – Rack mounted lane for 3 PP Storage capacity: 195 pallets Total load capacity: 120 900 kg Requested space: 15.25 x 21.56 x 9.05 m – L x W x H Type of forklift truck to be used: Min. working main aisle: 4.4 m Min. reach height: 7.7 m

up to maximum panel format 1397 x 1778 mm, with automatic pallet loader Immediately available, price on request

incl. inline punch, automatic pallet loader with 2 segments, under full maintenance contract Coming soon, price on request

Fully automatic machine with automatic plate feeder consisting of 5 cassettes, identical to AGFA Avalon N8-60 XT, available at short notice, price on request

This used riveting system from Gesipa is equipped with a spring-loaded release system and comes with Compressed air operated in a range of 5.00 bar to 7.00 bar. Comes with a 17/24 mouthpiece. Blind rivets up to up to 5 mm Ø all materials and up to 6 mm Ø aluminium/steel (max. mandrel Ø 3.2 mm) and offers a Setting force of 11000N.

Coolant filter system KNOLL KF 600 / 1500 -CE marking -Coolant tank -Paper belt filter -Control - OP 3 -Coolant pumps Dimensions: LxWxH 2.4x1.2x1.5 meters / Weight 1200Kg

Heidelberg Suprasetter A52/A74 Age: 2008 machine is in use in school Max. format: 670 x 525 mm Min. format: 240 x 240 mm Total Counter: only 907 exposes 64 Diodes Resolution: 2540 dpi For Thermal Plates Prinect MetaDimension 2015 Punching Device

Waterjet cutting machine with plasma Manufacturer: TCI Cutting Type: BP-C 4020 Year of Make: 2019 CNC control: TCI CNC 4.0 Working area: 4x2 m Equipment: 1 cutting head KMT OEM SL-VI 50 hp 4,000 bar with high-pressure pump 1 Plasma cutting head with Hypertherm XPR300 power source TCI SRA 4.0 High Voltage Control System Abrasive transfer system Abrasive measuring system Anti-collision system Water treatment plant TCI HIDROSYSTEM 2.0 Sludge removal system Lantek Expert 2D software with automatic nesting function

Manufacturer: VISCOM Model: S3088 III Year of Manufacture: 2011 Weight: 750kg Last annual maintenance by Viscom: June 23, 2025 With a loading/unloading machine: - Manufacturer: ASYS - Type: AES 03DK - Year of manufacture: 05/11 - Weight: 335kg Find more here - / Contact us at -

Product Overview: EDA Industries SM 24 FH 150 Description: The EDA Industries SM 24 FH 150 is a high-performance Burn-In Oven System designed for reliability and stress testing of semiconductor devices. This 2018 model is engineered to simulate extreme operating conditions, helping to identify "infant mortality" failures in integrated circuits and power modules before they reach the final consumer. Technical Specifications: - Manufacturer: EDA Industries - Model: SM 24 FH 150 (SM24 / SP40 Series) - Year of Manufacture: 2018 - Application: Semiconductor Burn-in / Reliability Testing / Life Cycle Testing - Max Operating Temperature: 150°C (Standard) - System Type: Thermal Chamber with Electronic Testing Interconnects Physical Dimensions: - Width: ~79.13 in (201 cm) - Depth: ~86.61 in (220 cm) - Height: ~78.74 in (200 cm) - Weight: ~1,800 lbs (816 kg)

This work piece handling system was manufactured in 1999. Consider the opportunity to buy this ROMMEL BM600S work piece handling system. It features a conveyor belt and BE unloader, making it suitable for efficient material handling tasks. Reach out for further details regarding this machine.

Code: 0306 Brand: VM Model: 2/18 Suction system with 18 sleeves and 2 collection bags for carpentry workshops, furniture factories, sawmills, woodworking shops and various Technical data: N° 18 filtering sleeves N° 2 collection bags Motor Hp 7,5 Electrical panel Overall dimensions: mm 2800 x 1200 x 3200 h

Positioning resolution: 1µm, max. placement rate: 6000cp/h, max. feeder capacity: 310, min. PCB dimensions X/Y: 50mm/50mm, max. PCB dimensions X/Y: 780mm/600mm, PCB thickness range: 0.5mm-3.5mm. Documentation available. An on-site inspection is possible.

This 6-axis CLOOS QIROX QRC-350-E was manufactured in 2020. It features a maximum reach of 1550 mm and a payload capacity of 6 kN, making it suitable for various robotic welding applications. The system includes a welding positioner and a laser system for enhanced functionality. If you are looking to get high-quality robotic welding capabilities, consider the CLOOS QIROX QRC-350-E automation system we have for sale. Contact us for further details.

DUMOULIN dosing turbine for small batches or for development. 2 tanks sold with the machine: 15 and 30kg System NEP Perilstatic Waston Marlow pump Sold without its power cabinets, fan and filtration system

WALTER BRUCKS coating turbine Stainless steel With ventilation and electric heating Speed variation Alternating rotation, Elec: 380 Volt 50HZ, Heating: Yes, Turbine diameter (mm): 950 mm, Turbine depth (mm): 550mm, Turbine material: stainless steel, Impeller material: stainless steel, Dimensions (mm): 1000x1500mm H 2100mm, Rotations per minute: 9 - 26 , Last use: December 2020, Last used: December 2020

Elec: 400V, Heating: no, Turbine diameter (mm): 1200 mm, Turbine depth (mm): 550mm, Turbine material: stainless steel, Impeller material: stainless steel, Dimensions (mm): 1350X1200mm H2300mm, Rotations per minute: 9 - 26, Last use: December 2020

A freestanding double cone mixer with double-sided bearing support from an unknown manufacturer is available. Capacity: approx. 1000kg. Grinding concentrates (abrasive powders etc.) were mixed with it. No documentation and no CE marking. An on-site inspection is possible.

FD84 S FOBA Laser System Year of construction 2003 Used, not tested, without pump arrangement Windows 2000 Without warranty Shipping possible Optional for an extra charge on request: with pump arrangement, tested and inspected

FD84 S FOBA Laser System Year of construction 2002 Used, not tested, without pump arrangement, without PC Without warranty Shipping possible Optional for an extra charge on request: with pump arrangement, tested and inspected

Manufacturer : Prefamac Chocolate Tempering, Melting & Forming Machine Model : probably MUO 80 Year of construction : unknown electr. Values : 400 V 50 Hz 3Ph Capacity : ~80kg User capacity : Machine dimensions : approx. 1150 x 780 x 1600 (lxwxh in mm) Weight : approx. 120 kg Details : Stainless steel construction. Electrically heated and thermostat-controlled Swivel agitator installed in the tank With vibrating table AISI 304 stainless steel structure, mounted on a frame with castors Lifting wheel made of food-safe plastic Good used condition Application; Melting, tempering and pouring of chocolate, Coating of biscuits. We offer this machine for sale "in existing condition" under exclusion of any warranty/defect claims or representations. from the Hess warehouse. Lichtenau; unpackaged

Screen 4300 E year 2006 16 diodes Plate Winding Cycles 136.843 exposure time 7,835 h PC with RIP Harlequin good condition

Laser system 50 watts, FOBA DP 50 for marking and engraving with focusshifter, focus distance from 426 mm to 669 mm, deflection unit Raylase TS10 and 163 mm lens, Windows XP with 1.4 GHz, 512 MB RAM, Termotec cooler built in 2005, used, ready for use, cleaned and tested. Warranty 3 months, excluding the pumping arrangement,

Manufacturer Transtherm Cooling Industries Model TD90W/VEE-212/D Dry Air Cooler Year 2023 Condition Used Stock Number SBS20220469

A Bohle container mixer is available. Mixing load: 900kg, Container volume: approx. 800l, Usable filling degree: 85%, Mixer speed: 6rpm, Container diameter: 1100mm, Machine height: 2800mm. An on-site inspection is possible.

A row based pallet flow racking system Jungheinrich with roller tracks is available. Load carrier: Euro pallet, rack bay length: 2000mm, max. bay length: 2700mm, channel width: 2000mm, rack height: 2000mm, roller cassette height: 1450mm, beam pair height: 550mm, max. load level/channel: 5200kg/400kg, roller modules: 3/level, max. bay load: 200kg, roller track channel length: 2550mm, roller module inner width: 872mm, roller module installation width: 947mm, roller diameter: 60mm, roller pitch: 175mm, max. roller load capacity: 240kg. Documentation available. An on site inspection is possible.

Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut-P 3001.20 Year of Make: 2014 Operating hours approx.: 7,024 Control: iMSNC Work surface: 3,000 x 2,000 mm 1 plasma torch power source Kjellberg HiFocus 280i neo with all-gas console Integration of the HiFocus 280i plasma source into the control system Remote maintenance access through TeamViewer 15 m hose package Without suction 1 x Asper Win Basic nesting software + autom. Nesting on the machine control All-throttle = allows you to change the throttle to improve the quality of the cut and Adapt the cutting speed to the material.

FRAMAX CIP SET Portable CIP Set - Second Hand Type FRAMAX 0500X2 Manufactured: 2019 Two x 500 litres approx. tanks. The machine requires a supply of Steam and compressed air plus three phase power : INSTALLED POWER 2 KW POWER SUPPLY 400 VAC 50HZ+PH+N+E AIR PRESSURE BAR 8/10 HEATING STEAM PRESSURE BAR 2.5 WATER PRESSURE BAR 2.5/3.5 UTILITY CONNECTIONS WATER 3/4” M PNEUMATIC AIR 3/8” F STEAM 1/2” F CIP DELIVERY DN 40 F CIP RETURN DN 40 F DRAIN DN 40 F Machine Dimensions : LENGTH 1200 WIDTH 1600 HEIGHT 2150 WEIGHT 350 Kg For more information and more available stock please visit us at - advancedbrewing.co.uk

Lift system, Kardex, shelf size: 1250x825mm, 7m high, – used - : Price from location: 13.950.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Bellheimer / Kardex Type: Shuttle 1250x825x10000 Device number: 95.008812/001 Year of Make: 1995 Tray size: 1250x825mm Device height: approx. 7m Depth: approx. 2.70m Width: approx. 1.6m wide. Number of shelves: 44 pieces Permissible total payload: 2x10,000kg Permissible shelf load: 250kg 3x400V, A: 3x5.2, KW 3.6 Condition: used Available: from approx. week 13/2026 Location: Speyer

Manufacturer: Venjakob Model: VEN SPRAY ONE Type: Automatic flat-line spray coating machine with dry filter extraction Control: 15-inch touch screen PC with recipe management system Compliance: CE-certified, user interface and documentation available in local language Technical Specifications - Overall dimensions (L x W x H): 4,084 x 4,000 x 2,600 mm - Working width: 1,300 mm - Feed speed: 1 to 4 m/min - Gun traverse speed: 0.4 to 2.0 m/sec, infinitely variable (max. 25 double strokes) - Electrical connected load: 11 kW - Maximum supply air: 7,000 m3/h - Maximum exhaust air: 7,000 m3/h - Compressed air consumption: approx. 100 NL/h (varies with equipment) - Minimum workpiece size: 250 mm x 25 mm x 6 mm - Maximum workpiece size: unlimited length x 1,300 mm width x 50 mm height --------------------------------------------------------------- Find more here - / Contact us at -

Manufacturer: Keyence Model: IM-8000 Type: Image Dimension Measurement System Software Version: B-13.0.0.28-11.07-20.07.09.01 / A2.05-A1.27-A3.03-9B.06-9B.06-02.01-03.02 Sensor: 20-megapixel CMOS Stage Size: 300 x 200 mm Measurement Capacity: Up to 300 features in a single measurement cycle Condition: Used, fully functional Find more here - / Contact us at -

An alkaline based single chamber cleaning system wash system is available. Containers: 3, total tank volume: 12.9m³, working dimensions X/Y/Z: approx. 8000mm/1200mm/1600mm, overall system dimensions X/Y/Z: approx. 19500mm/7200mm/4300mm. Documentation available. An on site inspection is possible.

A relatively modern corona pretreatment system for single sided aluminum foil coating is available. Material: aluminum foil, intended use: coating, coating sides: 1, web width: 1350mm, treatment width: 1450mm, treatment speed: 3m/min, roll diameter: 125mm, roll length: 1550mm, generator type: Softal 9030, generator power: 3kW. Total system dimensions X/Y/Z: approx. 2000mm/1550mm/1700mm, weight: approx. 1500kg. Including ozone exhaust system RD 4. Documentation available. An on site inspection is possible.

A Ferrarini & Benelli corona pre-treatment system for surface activation of non-conductive materials in continuous production processes is available. Generator type: C15/4N, output frequency: 15kHz, electrode design: multi-cylinder roller electrodes, max. treatment width: 200mm. An on-site inspection is possible.

A complete painting system on two levels for engine manufacturing including all necessary aggregates and components is available. Workpiece carriers in the system: 118, cycle time: approx. 49s, complete throughput time: 97min, max. production capacity with 3 shifts: 258000/year, overall system dimensions X/Y: approx. 26000mm/9000mm. 1) Adsorption dryer. 2) Steam humidifier Carel. 3) Two- and three-stage filter boxes. 4) Compressor technology. 5) Air dryer Hygrex. 6) Robot with control cabinet and spray gun. 7) Paint dosing pump. 8) Paint preparation and cleaning. 9) Osmosis system. This is a complete painting system using a robot from cleaning to the drying process. Documentation available. An on-site inspection is possible.

Code: 0321 Brand: SCM Model: MULTIFLEX C - CE Standard Automatic working center for window frames for tenoning, profiling and contouring - Max workpiece thickness mm 140 - CE Standard Technical data Automatic carriage with chipbreaker Max working length 2800 mm Min/max workpiece thickness 30/140 mm End cutting saw diameter 400 mm - Motor Hp 4 Tenoning spindle useful length mm 320 - Motor Hp 10 Spindle diameter mm 50 Max tool diameter mm 350 Profiling spindles: 1° Anti-splinter profiling spindle length 320 mm - Motor Hp 7,5 - Tool diameter mm 220 2° profiling spindle length mm 320 - Motor Hp 7,5 - Tool diameter mm 220 Min and max diameter of profiling spindles tools mm 100/220 Profiling spindles diameter 50 mm Tool group Zuani Variable speed feed Glazing bead recovery group - Motor Hp 3 - Diameter of suction mouth mm 50 Overall dimensions mm 2400 x 3300 x 200 ...

Laborconche, Year of manufacture and manufacturer unknown (Probably Petzholdt or Truisoma) Capacity approx. 10-15 l with vacuum connection inside stainless steel Lid can be lifted + lowered via counterweight with 2 sight glasses Stirring organ floor- + wall-stripping Motor 1.5/2.2 kW, 720/1450 rpm with temperature indicator for water, current meter Machine only ran for a little over 3200 hours Dimensions: 900 x 1300 x 1800 mm high We offer this machine for sale "in existing condition" under exclusion of any warranty/defect claims or representations. from the Hess warehouse. Lichtenau; unpackaged

Manufacturer: Mahlo Model: Webpro M Year of Manufacture:2021 Power supply: 230 V AC Electrical connection: 1L / N / PE Frequency: 50/60 Hz EMC interference class: G Protection class: IP43 Product: Inline quality measurement system QUALISCAN QMS-12 by Mahlo Function: Inline system for continuous measurement of thickness and basis weight during production. Sensors are mounted on a traversing frame and move left to right across the material to measure over the full production width and length. Measured parameters: Thickness Basis weight Additional parameters possible depending on configuration Measurement principles: Thickness measurement by laser triangulation, double-sided measurement of top and bottom surfaces Measurement range: 0–100 mm Reproducibility: ±25–50 µm Basis weight measurement by X-ray transmission X-ray intensity is reduced according to material mas ...