141,810 used machines on RESALE, but how to find them? Machine Search
COVER LABELING SYSTEM SCHLEUTER GU 2 DO WITH 2xSTATIONS FOR PLACING SPOONS M. No.: 12087 Performance: 90 lids per minute (spoon inserted diagonally) Consists of: - Stacker - 2xStations for placing spoons - Labeling unit - Delivery station
Reflow soldering system Centurion 1040N Dimensions: 6,280 mm x 1,600 mm x 1,420 mm Weight approx. 2,500 kg 10 heating zones, length 3,550 mm 4 cooling zones, length 1,420 mm, with connection to domestic water cooling or chiller Year of construction 2022, first installation 12/2022, operation in line 10 months Additional Frequency Inverter Peak Bottom Pin Chain Transport PCB support throughout with tabs Automatic width adjustment and chain lubrication Transport direction from right to left Full nitrogen system incl. control Process gas cleaning CATHOX-ULTRA, full equipment SMEMA interface Process Data Acquisition Extensive special equipment Maintenance and much more
COVER LABELING SYSTEM (Zweckform with Schleuter label dispenser) Age : ca. 1990 Performance: 100 cups/lids per minute Equipment / Additional information: Consists of: - Stacker - Labeling unit - Stapler
Bread roll line Dough sheet line for angular and elongated products Dough feeding belt Pre-portioner Head machine incl. div cutting rollers with baguette long-knitting station - Incl. 2 knitting drums (1-r long + 2-r short) with stump station - incl. 2 diamond stumblers / + // or average Humidification and sprinkling station Year of construction: 2017 - With intermediate belt and lattice belt immersion bath - simple sprinkling station with 2 seed containers (coarse/fine) Deduction - 4x60/40 or 2x60/80 planks or sheets Disassembled, not overhauled or cleaned from the Rottenburg warehouse immediately available in bakery condition
Fine smoke system with smoke generator for dosed chip quantity, Timer for smoking processes depending on the desired dryness
suitable for nitrogen all stainless steel belt width ± 600 mm nett belt length ± 6.000 mm dimensions (l x w x h) : ± 7.600 x 1.500 x 2.300 mm
Dexion Speedlock pallet rack P90 H RA1094 Ideal for your pallet storage needs, the Dexion P90H galvanized pallet rack provides a highly efficient, flexible solution for any need. Product information: - P90 H type upright frame, bolted infill. - Height x depth 8,450 x 1,100 mm. - Post width 90 mm. Beam type SLI 2.700 mm incl. safety pins - Shelf load 1,200 kg with evenly distributed load - floor fixing on site Example: Basic bay length 2,880 mm + add-on add-on bay length 2,790 mm Basic bay consisting of: 2 pcs. upright frame 10 pcs. beams incl. safety pins Extension panel consisting of: 1 pc. upright frame 10 pcs. beams incl. locking pins Technical data: Manufacturer: Dexion Frame type: P90 H Beam type: SLI 2700 mm Year of manufacture: 2009 Shelf load: 1200 kg with evenly distributed load Condition: good In case of larger demand, we will be glad to offer you a suitable individual pallet r ...
Heat-Recovery system (storage tank 1000ltr with internal heat exchanger) -for drinking water -function Qü = ca. 7 kW (inox-screw-heat exchanger-activity 7 kW) - refrigerant- access/discharge 77°C / 50°C - drinking water- access/discharge 40°C / 50°C (complete from 10°C to 50°C- at small drinking water-need is the gotten energy automatic for heating transfer) -for heating-function Qc = 31 kW + 9 kW =40kW Energy buffer storage 1000/800 volume: 1.000 ltr diameter: 800 mm diameter with insulation: 960 mm storage height: 2.290 mm total height: 2.590 mm
Gantry system / 3-axis handling system / handling robot 3-axis handling system from the field of plastic films, built in 2014. The machine can no longer be used for this purpose, as the specific units are no longer available. The handling system is very well suited as a base carrier for new applications in automation. Special-purpose machine manufacturers can use the handling system as a cost-effective base carrier for the construction of an automatic processing machine and thus secure cost advantages in the competition. This can be the mechanical processing of soft materials or stirring technology, as a pneumatic motor with a chuck is now attached. Or a handling device for recycling batteries. All linear actuators with drivers are high-quality Festo components. CMXR multi-axis controllers. Dimensions: WxDxH: 2.5 x 2.0 x 2.3 m Weight approx. 1 ton Equipment: Base ...
Flat wafer machine HAAS SWAK Price € 90,000 Year of construction approx. 1996 Location: Poland - Number of baking plates: 72 - Engraving: Tiefcarre - Panel size: 460 mm x 290 mm - Blade thickness: 5.1 mm Only the baking machine without any additional accessories is sold. Haas / Hebenstreit
Flat wafer oven CHSW64-58 Made in the Czech Republic Price € 40,000 Year of construction approx. 2000 Location: Poland - Number of baking plates: 58 - Panel size: 460 mm x 290 mm - Blade thickness: 5.1 mm Only the baking machine without any additional accessories is sold. Haas / Hebenstreit
Data sheet of retrofit POS. GE 22.10 Gebhardt 7.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 7.449 mm (incl. upper bow piece + straight piece) Upper bow piece length: 392 mm Upper straight piece length: 3,830 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 1700 mm H 2 above 2,800 mm Difference in altitude: + 1.100 mm, trail/slope 19° or 34% Support: ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Features: Construction ...
Gebhardt Belt conveyor system 5549-610-500 with pre-flow belt 900-610-500 RA1005 The belt conveyor system from Gebhardt is from 2007 and is in a very good (used) condition. It has an engine of the brand SEW. The system can be used in up-and-down operation. Inclination angles are adjustable as desired, upper arc and supports can be adjusted. Columns are not included in the scope of delivery. These are optionally available. Consisting of: 1 x pre-flowstrip, 1 x main band, 1 x sheet piece Technical data: Manufacturer: Gebhardt Type: 300.10 Position: GE 12.20 Built: 2007 Condition: very good (used) Engine: fully functional Length main band: 5549 mm (incl. top bow) Nominal/outer width (NB): 610mm Belt width (GB): 500 mm Webbing: slightly structured Length pre-flow belt: 900 mm Length of sheet: 613 mm Webbing: smooth Heights OK Strap: H 1 bottom + 650 mm H 2 top 2,300 mm Height differenc ...
Data sheet of retrofit POS. GE 12.05 Gebhardt 7.7 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 7,733 mm (incl. upper bow piece + straight piece) Upper bow piece length: 375 mm Upper straight piece length: 1,293 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 2,300 mm H 2 above 4,320 mm Difference in altitude: + 2,020 mm, trail/slope 19° or 34% Support: ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Features: Construction ...
Manufacturer: General Inspection (Gi) Model / Machine Type: DT-100 Date of Manufacture: 10/2018 Find more here - .ucymachines/ Contact us at - sales@ucymachines
Data sheet of retrofit POS. GE 11.85 Gebhardt 6.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 6.529 mm (incl. upper bow piece) Upper bow piece length: 613 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 2,300 mm H 2 above 4,320 mm Difference in altitude: + 2,020 mm, trail/slope 19° or 34% Support: ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable State: functionally and visually good condition Features: Construction year: 2007 condition: very good (used) Conveying length in ...
Paint dosing system from Fluid Solution incl. software
Bitzer refrigerant compressors unit Type: HSK7461-80-40P (x3) Volume: 220 m3/h (x3) Cooling capacity for R404A: 560 kW at - 5°C/40°C, 477 kW at -10°C/40°C, 338 kW at -20°C/40°C Dimensions: 4500 x 1200 x 2300 mm Condenser Thermofin Type: X-TCH 100.1-25-B-N(D5/S5) Cooling capacity: 963/852 KW Air flow: 295 000 / 234 000 m3/h Number of fans: 10 x 1000 mm Dimensions: 9800 x 2300 x 1600 mm Volume: 229.3 L Weight: 1 929 kg Control panel Dimensions: 2400 x 600 x 2000 mm
Elements: Product transport/transfer area, robot stations, packaging material feed, forming/transfer area, multi-lane magazine/handling area, number of suction stations: 16, with CE marking. An on-site inspection is possible.
Coolant cleaning system Manufacturer: Cyclomat Type: CCNR 14/350 Year of Make: 2016 For cleaning the abrasive emulsion Supply with max. approx. 250 L/min. at approx. 3.5 bar water Lifting into the filter system is done on site, Air- and foam-free. Max. temperature: 50°C Cleaning capacity: 350 L/min. Recirculation from clean tank to turbidity tank: 100-350 L/min. Machine supply max.: 250 L/min. Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Separation grain limit: approx. 5 μm Medium: Emulsion 3-6 % Operating Temperature: Ambient Temperature Solid particles: approx. 5.14 m3 Max. operating volume: approx. 4.58 m3 Min. operating volume: approx. 3.60 m3 Procedure: Fully automatic full-flow filtration Sludge discharge: Fully automatic, with a solid consistency The dirty liquid is supplied via on-site lifting sta ...
Bitzer refrigerant compressors unit Type: HSK7471-90-40P (x3) Volume: 250 m3/h (x3) Cooling capacity for R404A: 531 kW at -5°C/40°C, 435 kW at -10°C/40°C, 280 kW at -20°C/40°C Dimensions: 4500 x 1200 x 2300 mm Condenser Thermofin Type: X-TCH 100.1-26-B-N(D5) Cooling capacity: 1103 / 997 KW Air flow: 354 000 / 281 000 m3/h Number of fans: 12 x 1000 mm Dimensions: 11 800 x 2300 x 1600 mm Volume: 276 L Weight: 2 400 kg Control panel Dimensions: 2400 x 600 x 2000 mm
Two Emma flying probe PCB testers are available. 1) Emma ELX 6146 flying probe PCB tester, year of manufacture: 2004. 2) Emma ELX 6146 flying probe PCB tester, year of manufacture: 2002. An on-site inspection is possible.
Automation system manufactured in 2017. This CLEANLASER CL 600 features a laser wavelength of 1064 nm. With 3 units available, this system is designed for precision applications. If you are looking to get high-quality automation capabilities, consider the CLEANLASER CL 600 machine we have for sale. Contact us for further details.
Work piece handling system manufactured in 2018. This TOP Automazioni Top Loader ETL 10-75 has a total weight of 2500 kg. If you are looking to get high-quality handling capabilities, consider the TOP Automazioni Top Loader ETL 10-75 machine we have for sale. Contact us for further details.
Bous Waschfix 70/T3 WSA Cleaning and Degreasing System BOUS Cleaning & Degreasing System Waschfix 70/T3 WSA Extras: Ultra-fine filters Draining pump Filter monitoring More items - new and used - can be found in our shop! International shipping costs on request!
We offer directly on behalf of the owner : Daikin EWAT240B-SLB2016 – air-cooled chiller R32 Manufacturer: Daikin Type : EWAT240B-SLB2016 Year of construction : 09/2022 Nominal cooling capacity : 241 kW Compressor : 4 × scroll Refrigerant: R32 Refrigerant capacity: 19 kg Temperature range TS: -20 / +150 °C EQUIPMENT / OPTIONS - OPTION-04 Compressor Direct Start (DOL) - OPTION-10 Second Setpoint - OPTION-128 master/slave control, max. 4 machines - OPTION-57 Evaporator Heat Trace - OPTION-60 Electronic Expansion Valve - OPTION-67 Ambient temperature sensor and setpoint shift - OPTION-68 Hour Meter - OPTION-69 Collective fault message - OPTION-70 External Alarm Contact - OPTION-97 Main switch - OPTION-11 Thermal Protection Relay Compressor - OPTION-21 Evaporator Flange Connection Kit - OPTION-58 Evaporator Flow Switch - OPTION-61 Hot Gas Shut-off Val ...
Bous Waschfix T6/70 WSA Cleaning and Degreasing System BOUS Cleaning & Degreasing System Waschfix T6 / 70 WSA Usable space: 700 mm Filling quantity: 280l / 280l Temperature +70 / +70 °C Heating: 18 / 12 kW Extraction: 0.56 kW Drying: 11 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total consumption: 84 A 400 V Year of construction: 2014 Extras: Ultra-fine filters Draining pump More items - new and used - can be found in our shop! International shipping costs on request!
Sandblasting system, blasting system, sandblasting cabinet, sandblasting device -Manufacturer: Joisten & Kettenbaum, Sandblasting system, Sandblasting cabinet -Type: 1200 -Operation: with foot pedal -Dimensions: 1400/1060/H2000 mm -Weight: 542 kg
Refrigerant compressors system Bitzer Type: HSK 6461-60 (x3) Volume: 165 m3/h (x3) Cooling capacity for R404A: 351 kW at -5°C/40°C, 287 kW at -10°C/40°C, 185 kW at -20°C/40°C Dimensions: 3500x1000x2150 mm Items in magazine: 2 Reference number: Z64 Condition: Used in good condition
used
Two-column Stela continuous dryer, ALU exhaust fan with dust separator, circulating air fan, indirect air heater with stainless steel chimney, white main burner, corn capacity 30 t/h, 35 to 15% H2O, Tel. 01715213204
Key data: 68 KW, 85 kVA, 400 V
PTO generator 85 kVA for field operation, optionally also for yard operation Aggregate type: transportable Design: Weatherproof IP 44 PTO : 540 Technical Data Generator: Generator manufacturer: WA Generator type: WA-ZB 85/4 Gene. No.: on request Generator power: 85 kVA Dimensions of the unit: Width approx. mm: 800 Height approx. mm: 923 Length approx. mm: 1,204 Weight approx. KG: 386 Scope of delivery: PTO generator for field operation, optionally also for yard operation, building seizing with 1H socket according to VDE 0100-551 with synchronous three-phase generator, incl. electronic voltage regulator AVR in protection class IP 44 (splash-proof) Gearbox for 540 PTO Tractor power / min. KW 125 Tractor power / min. hp 170 PTO speed / rpm 400 Generator speed / rpm 1,500 Required PTO / NM 2.671 Sockets / Mennekes / PCE ...
welding current: 20 - 60 A cutting capacity: 1 - 20 mm open-circuit voltage: 104 V Required air-pressure: min. 4 bar connected load: 7,9 kW connected load frequency: 400 V weight: 16 kg Dimensions (LxWxH): 480 x 260 x 360 mm Digital display. Surge protection. Plasma torch. Earth cable. Reducing valve with moisture separator. Equipped with IGBT technology Delivered without CEE plug. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
for cap type PCO 28-1881 with Siemens S7 PLC Capacity: approx. 40,000 caps/h with sorting unit with cap control incl. approx. 18 m feeder with 2 blowing stations
Brötchenlinie, bis 110 Gramm, groß, gepflegt. Ein Kaiserbrötchen, einen Kaiserstern, ein Baguette machen
maximum number of results exceeded
please refine your search
