swiss used for sale

This 5-axis TORNOS Swiss DT 26 S was manufactured in 2022. It features a maximum bar capacity of 25.4 mm and a main spindle speed of 10,000 rpm. The machine includes a total tool capacity of up to 22 tools and live tool positions of up to 8. If you are looking to get high-quality turning capabilities, consider the TORNOS Swiss DT 26 S swiss type turning machine we have for sale. Contact us for further details.

Consecutive wrongly ordered / project change! 2 piece Complete agitator with lantern, 2-piece agitator shaft, mechanical seal, gear motor, 2 stirring organs, quench entry, quench outlet, but without Thermosiphon. Installation and operating instructions. Price/piece

Laser-Italy, complete automatic biscuit and biscuit roll line 250-300 kg/h for: Small layer cakes, capacity: 19700 pieces/h, dimensions: 32x70xh23 mm Large layer cakes, capacity: 8900 pieces/h, dimensions: 48x100xh23 mm Mini rolls, capacity: 10300 pieces/h, dimensions: ø35x80 mm Sponge rolls, capacity 1190 pieces/h, dimensions: ø60x250 mm with 1 flow-wrapping machine 250-350 ppm (Syntegon-Germany) Includes: - Pre-mixing container for dough or baking mass PML200 - Turbo mixer aeration unit TML500 - Water cooling unit complete with connecting pipes, biscuit roll extruder, EXTR1000 - Sponge cake decorating unit before baking DECO1000 - Cyclothermal tunnel kiln FCT 1.0 x 10 m - Cooling belt for sponge cake TRPS1000 - Sponge cake work bench BLPS1000 - Longitudinal cutting device for sponge cake GRTL1000 without tools - Cutting Tools for Sponge Cake Cutter GRTL1000 - Syru ...

BCF 1 Line SWISSTEX BCF MACHINE YEAR: 2003 MONO 4 EXTRUDER 8 POSITIONS 10 TON/DAY Find more here - .ucymachines/ Contact us at - sales@ucymachines

BCF 2 SWISSTEX BCF MACHINE 2007 MONO, 2 EXTRUDER 8 POSITION - 10 TON/DAY Find more here - .ucymachines/ Contact us at - sales@ucymachines

BCF 3 SWİSSTEX BCF MACHINE 2008 MONO, 2 EXTRUDER 8 POSITION - 10 TON/DAY Find more here - .ucymachines/ Contact us at - sales@ucymachines

Chip belt dryer, Kuvo belt dryer, length 15.5 meters+7 meters

Tool holder, milling tool holder -Number: 14x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Dimensions: 800/320/H540 mm -Weight: 58 kg

Tool holder, milling tool holder -Number: 14x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Dimensions: 800/315/H740 mm -Weight: 66 kg

For sale is a used bottle washer from the manufacturer PAC Swiss. The machine was used in a small bottling plant until the end and ran there without any problems. Specifications: Manufacturer: PAC Swiss Model: CB 14-0.5-R-6.5 LII Compact Year: 2003/2004 Capacity: 8,000 bph (min: 4,000 bph, max. 10,000 bph) Bottle type: 0.33 Ltr, 0.5 Ltr. - Bottles per row: 14 - Machine is frequency-controlled via a FU (conversion took place about 5 years ago - Machine is made entirely of stainless steel Please inquire for further data.

Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Milling holder: SK40 holder -Inner diameter 57.5 mm -Dimensions: Ø 76 x 157 mm -Weight: 1.8 kg

New mobile dental unit reversed including with new demountable chair type DENTA-COMP PREMIUM MAKER BPR DENTAL MOBILILLITY BPR SWISS Perfect machinery international whatsapp +31 653549259 The Netherland whatsapp +34 682511830 Spain

Tool holder, milling holder, milling tool -Manufacturer: Dornag Swiss, milling chuck SK40 -Inner diameter: Ø 25 mm -Dimensions: Ø 65 x 175 mm -Weight: 2.1 kg

Factory liquidation mask production. Installation 2021, out of service since March 2022. The systems have already been dismantled and ready for delivery. Stationary industrial vacuum cleaner Power 2.2 KW Air flow rate 300 m/min Suction port 40/50 mm Weight 30 kg

This SWISS CAB KMV was manufactured in 2001. It is a pipe extruder designed for plastic-metal composite pipe systems. More technical details will follow soon. Consider the opportunity to buy this SWISS CAB KMV pipe extruder. Contact us for more information.

Swisstool 100 x 3 mm (fixed) Capacity : 100 x 3 mm Strokes/min: 110 str/min Fixed angle -- variable angle: fixed angle Driven: pneumatic

Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve, Weldon reduction -Manufacturer: Dornag Swiss, Milling holders: Adapter cylinder Weldon shaft - reduction Weldon 3 pieces -Type: Dia 32 Ø8/12/20 mm -Price/Delivery: complete -Transport dimensions: 100/52/130 mm -Weight: 1.8 kg/total

A glass bottle washing machine PAC Swiss is available. Washing capacity: 7500bottles/h, cycle time: 6.72s, throughput time: approx. 12min, bottle types: Euro/NRW/Ale, bottles per row: 14, max. bottles in the machine: 1456, bottle volume: 330ml/500ml, process: preheating/caustic treatment/recooling/spraying, machine dimensions X/Y/Z: approx. 7050mm/1800mm/2300mm, operating hours: approx. 14175h. Documentation available. On-site inspection is possible.

This is a swissQprint Nyala LED, which is a high-end, industrial-grade UV flatbed/hybrid digital printer manufactured in Switzerland. The unit was reburbished by swissQprint and installed in 2024 . Find more here - .ucymachines/ Contact us at - sales@ucymachines

A pneumatic Swiss-Sonic ultrasonic welding system is offered. 1) Swiss-Sonic UWP 20-1 ultrasonic welding press, year of manufacture 2014, max. pressing force: 3000N, min./max. welding stroke: 0mm/100mm, throat depth: 220mm, height adjustment: 300mm, max. operating pressure: 6bar, cylinder diameter: 80mm, compressed air connection: 8mm, working range: 220mm-520mm, footprint X/Y: approx. 650mm/450mm, machine dimensions X/Y/Z: approx. 430mm/600mm/1530mm, weight: approx. 150kg. 2) Swiss-Sonic ultrasonic generator. Including peripheral equipment. The images do not show the machine for sale. Documentation available. Inspection by appointment.

Key data: 1 t

Type : Thread rolling machine Manufacturer : Thommen – Made in Switzerland Model : PR17-CNC/AC Year of construction : 1999 BOSCH Control unit The system was first owned. The machine brings an error message/malfunction in the display. Mechanically, optically, everything is very good. The machine comes from the first owner, from a German company. Phone 017621834834

PWB SWISS TOOLMASTER 250 ist ein Werkzeug-Vorreinstellgerät hoher Präzision, ausgelegt für hohe Genauigkeit und Zuverlässigkeit. Längsweg (X) 100 mm, Vertikalweg (Z) 400 mm. Werkzeugaufnahme SK40; Anschluss 50 Hz 3x 230 Volt; Gesamtleistungsbedarf 0,2 kVA; Maschinengewicht ca. 80 kg; Abmessungen L1200×B800×H1700 mm. Zubehör: Einstelldorn, Reduktion SK40-VDI30, Drucker, Messuhr. Ermöglicht enge Toleranzen; typische Einsatzgebiete: Automotive, Uhrmacherei, Werkzeugbau, Luft- und Raumfahrt, Medizintechnik. Technische Daten ohne Gewähr

Key data: 1 t

Type : Thread rolling machine Manufacturer : Thommen – Made in Switzerland Model : PR17-CNC/AC Year of construction : 1999 BOSCH Control unit The system was first owned. The machine brings an error message/malfunction in the display. Mechanically, optically, everything is very good. The machine comes from the first owner, from a German company. Phone 017621834834

PWB SWISS TOOLMASTER 310-P ist ein Werkzeug-Vorreinstellgerät, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Längsweg (X-Achse) 250 mm und Vertikalweg (Z-Achse) 310 mm; Werkzeugaufnahme SK: 40. Anschluss 50 Hz 3x: 220 Volt, Gesamtleistungsbedarf 0,2 kVA. Maschinengewicht ca. 80 kg; Abmessungen L 430 x B 400 x H 800 mm. Ermöglicht enge Toleranzen; geeignet für Automotive, Uhrenindustrie, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

SWISSTOOL ist eine Hydraulische Presse, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsfähigkeiten: Druck 15 to; Hublänge 160 mm; Tisch Länge 950 mm, Breite 140 mm; T-Nutenbreite 10 mm; Ausladung 280 mm. Technische Daten: Maschinengewicht ca. 300 kg; Abmessungen L 1000 x B 800 x H 2000 mm. Zubehör: diverses Zubehör und Sockel. Ermöglicht enge Toleranzen; typische Einsatzbereiche: Automotive, Uhrmacherei, Werkzeugmaschinenbau, Luft- und Raumfahrt, Medizintechnik. Technische Daten ohne Gewähr

sliding headstock CNC lathe, year 2015, 2368 operating hours, CNC 31i-MODELB. Used machine. More info & price on IndustrialBuyer.

This ESCO Escomatic EC12 was manufactured in 2010. A Swiss type turning machine, its ideal for precision and efficiency in small part production. Contact us for more information about this machine.

Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible.

This CITIZEN M32 III Swiss Type Turning was manufactured in the year 2004. It is equipped with a Cincom control unit. The machine has a spindle speed of 8000 rpm. See official brochure attached for more details.

This 7-axis Citizen Cincom L20 VII was manufactured in 2000. It features a maximum machining diameter of 20 mm and a maximum machining length of 200 mm per chucking. The machine is equipped with a Mitsubishi Meldas CNC control and includes a bar feeder, enhancing its productivity. If you are looking to get high-quality turning capabilities, consider the Citizen Cincom L20 VII Swiss-type turning machine we have for sale. Contact us for further details.

This 5-axis TORNOS Delta 20/5 was manufactured in 2008. It features dual spindles, each capable of handling bars up to 20 mm in diameter and 170 mm in length, with speeds up to 10,000 rpm. Powered by a Fanuc Series Oi-TD CNC and equipped with a Robobar barfeed magazine, this swiss type turning machine is ideal for precision work. Contact us for more information about this machine.

This 6-axis ERGOMAT TBC-42 Swiss Turning Machine was manufactured in 2012. It features a maximum material diameter of 42 mm and a spindle speed up to 5000 rpm. Equipped with a Fanuc 18i-TB Dual Path control, it offers precision and versatility with 8 tool positions and rapid feed rates up to 30 m/min. If you are looking to get high-quality turning capabilities consider the ERGOMAT TBC-42 machine we have for sale.Contact us for more information.

This CITIZEN M32 III Swiss Type Turning was manufactured in the year 2005. It is equipped with a Cincom control unit. The machine has a spindle speed of 8000 rpm. See official brochure attached for more details.

This 10-axis TORNOS EvoDECO 32 was manufactured in 2022. It features a main spindle and counter spindle with a maximum speed of 8,000 RPM, and a bar capacity of up to 32 mm. The machine includes a robust tooling system with multiple rotating tools and a high-pressure coolant system. If you are looking to get high-quality turning capabilities, consider the TORNOS EvoDECO 32 swiss type turning machine we have for sale. Contact us for further details.

This Gildemeister Sprint 20-8 was manufactured in 2010. It features a cooling system with a 600l capacity and 50µm filter, alongside a high-pressure pump option of 8 or 20 bar. The machine includes a Bristol B270/E oil mist separator and an IEMCA Boss 332E bar loader for 3m bars. With a chip discharge height of 1,250mm, its designed for efficient operation. Contact us for more information about this machine.

This CITIZEN M32V Swiss Type Turning was manufactured in the year 2007 in Japan. The machine has a spindle speed of 8000 rpm. Official brochure attached for more details.

This 8-axis Maier ML26 C5Y were manufactured in 2019. It features a spindle capacity of 26 mm and a rapid carriage speed of 32 m/min. The machine includes a robust coolant capacity of 260 l and is equipped with a bar feeder and extensive tooling package. Three machines available! If you are looking to get high-quality turning capabilities, consider the Maier ML26 C5Y swiss type turning machine we have for sale. Contact us for further details.

This 9-axis TSUGAMI TMB 2E swiss type turning machine was manufactured in 2012. It features a main and counter spindle both with speeds up to 6,000 rpm and 11 kW power. The machine includes a 16-position turret and a milling spindle that reaches 10,000 rpm. It supports rapid traverse rates up to 50 m/min on X and Y axes, and 36 m/min on Z-axis. Consider the opportunity to buy this TSUGAMI TMB 2E swiss type turning machine. Contact us for more information.

This 4-axis STAR MICRONICS SR20 was manufactured in 1998. It features a FANUC Series 16-T control unit and includes an IEMCA Bar Feeder for enhanced productivity. The machine is operational and in good condition, with occasional faults in the hydraulic system. If you are looking to get high-quality turning capabilities, consider the STAR MICRONICS SR20 swiss type turning machine we have for sale. Contact us for further details.

Without rolling table Auction-ID: A7-51473-58

Swiss type turning machine manufactured in 1991. This Star RNC-16B features a FANUC Series 0-TT CNC control unit and includes an automatic magazine bar feeder. It is equipped with a sub-spindle, pick-off unit, and back working station for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the Star RNC-16B machine we have for sale. Contact us for further details.

Swiss type turning machine manufactured in 1995. This Star RNC16B-1 features a belt-driven spindle motor and is equipped with a flexible coolant system for enhanced performance. If you are looking to get high-quality turning capabilities, consider the Star RNC16B-1 machine we have for sale. Contact us for further details.

This Hanwha STL45D was manufactured in 2011. It features a Siemens 840D control system, with main and sub spindles capable of 6,000 rpm and 5,000 rpm respectively. It supports a max turning diameter of Ø45 mm and includes 12 tool stations on both turrets. Additional features include a chip conveyor, product conveyor, and hydraulic brakes on both spindles. If you are looking to get high quality turning capabilities consider the Hanwha STL45D machine we have for sale. Contact us for more information.

This 7-axis Star SR-20J type C Swiss Type Turning was manufactured in 2015. It features a maximum machining diameter of 32mm, headstock stroke of 310mm, and spindle speeds up to 7,000rpm. Equipped with a Hydrajet BF20-2000 high-pressure coolant system and an Absolent A.Mist 10S mist extraction unit, the Star SR-20J type C represents a robust addition to any machining setup. Contact us for further details regarding this Swiss Type Turning.

This 6-axis Citizen C32 VIII was manufactured in 2005. Ideal for precision swiss type turning, this machine offers robust functionality and reliable performance. Consider the opportunity to buy this Citizen C32 VIII swiss type turning machine. Contact us for more information.

This 12-axis Citizen Cincom M16-4M8 was manufactured in 2021, featuring a robust configuration with up to 38 tools, including gang, turret, and back tool post options. It supports a rapid feed rate of 32 m/min, with specialized rates for X2, Y2, and B axes. The main spindle motor outputs 2.2/3.7 kW, ensuring efficient operations. Consider the opportunity to buy this Citizen Cincom M16-4M8 Swiss type turning machine. Contact us for more information about this machine.

This 3-axis Citizen CINCOM A32-VII CL swiss type turning machine was manufactured in 2014. It features a main spindle with a 32 mm capacity, a counter spindle, and a maximum turning length of 3000 mm. Equipped with a high-speed CHIDOMI system, it supports simultaneous movements across all axes and offers a feed rate up to 9,000 mm/min. Consider the opportunity to buy this Citizen CINCOM A32-VII CL swiss type turning machine. Contact us for more information about this machine.

This 3-axis Star SR 20 R III was manufactured in 1996. It features a max turning diameter of 20 mm, spindle speeds up to 8,000 RPM, and a rapid feed rate of 35 m/min. Ideal for precision turning, it also includes six fixed turning tool stations and five radial driven tool stations. If you are looking to get high-quality turning capabilities, consider the Star SR 20 R III machine we have for sale. Contact us for more information.

This 8-axis Tornos-Bechler Deco 20a was manufactured in 2002. A Swiss type turning machine featuring a max turning diameter of 20mm, equipped with a Fanuc control system, motorized tools, main and sub-spindle, and a ROBOBAR SSF automatic bar loader. Includes tool holders and collets. A great opportunity to buy this Tornos-Bechler Deco 20a Swiss type turning machine. Contact us for further details regarding this Swiss type turning machine.

This TORNOS DECO 2000/20 was manufactured in 1998. A robust Swiss type turning machine, it features a bar passage of 25.4mm and can handle up to 21 fixed and 15 rotating tools. It includes an IEMCA loader and a conveyor system, enhancing its operational efficiency. Consider the opportunity to buy this TORNOS DECO 2000/20 Swiss type turning machine. Contact us for more information about this machine.