swah used for sale

SWAN RAKOBAK 1500 Smoke System, Smoker, Smoke Chamber Smoke Chamber Smoking system / smoker SWAN RAKOBAK 1500 TYPE: RAKOBAK 1500-E-100 /P3000 Specifications: 400 V / 50Hz / 50 A Nominal capacity: 1500 liters Year of construction: 2008 Heating: Electric Nine-heat load 28 kW Functions: Redness, Drying, Cold Smoke, Hot Smoke, Smoking, Cooking, Baking, Air Conditioning, Shower, Cleaning, Rinsing 3-speed circulating fan Separate smoke generator for friction smoke Height: 90 cm Dimensions smoke chamber: HxWxD = 245 x 126 x 125 cm (width plus control 25 cm) Dimensions smoke generator: HxWxD = 125 x 60 x 115 cm Dimensions smoking trolley: HxWxD = 148.5 x 98 x 80 cm Door hinge on the right original wiring diagram is included The system is in stock ready for shipment. Good condition. The system was in operation until recently and needs to be reconnected by a professional ...

Code 93024 Description Chucking lathe Make Warner & Swaswy Model 0 - AC Serial No. 2083651 Year 1972 Swing over bed 200 mm Swing over gap 200 mm Swing over crossslide 200 mm Spindle bore --- mm Longitude: 140 mm Cross: 100 mm Chuck : 160 mm Bore: 20 mm Number of spindle speeds 32 Spindle speeds 58 - 2507 rpm Feeds Longitude and cross Motor power 5,5 kW – 380 Volts Accessoiries hydraulic 3 chuck coolant Condition Machine is in good condition.

ID2788 Normet Injection & swap body for maintenance Normet undercarriage NT60 (generally revised), with 2 swap bodies (for injections with cement silo body (generally overhauled) & swap body for maintenance in the tunnel (new) (i.e. the swap body "maintenance unit" is necessary for supplying and maintaining the equipment, e.g. in tunnel construction. These are included Oil barrels, a 1000 liter diesel tank, an emergency generator, a workshop compressor and hose fittings, like at the gas station to fill up the devices with diesel or to refill oil). The maintenance unit is brand new and built as a swap body. Standardet undercarriage NT60 (completely overhauled), with 2 swap bodies (for injections with cement silo superstructure (refurbished) & interchangeable body for maintenance in tunnels (new) (i.e. the swap body "maintenance unit" is necessary for the supply and maintenance of the e ...

Swath capacitor for Miwe Rollin Stikkenofen -Swath killer capacitor -0.2 kW -1-N-PE AC 240V 50Hz

Welding converter, DC welding machine, welding transformer ELIN SWA 304 P 7.5 kW 25 - 300 A 220 - 500 V 3AC used, tested ! Dimensions: 1000 x 600 x 840 mm

Tool grinding machine WMW SWA 200 grinding diameter max Ø 600 mm grinding length max 470 mm table movement longitudinal 470 mm tool holder MK2 swivel 0-6 °, 90° Speed range: 1260 - 3100 rpm 0,0,4 kW 220 / 380 V used, tested ! Dimensions: 1100 x 1100 x 1500 mm

Material: mild steel Drive: 5.5 KW Weight: 1750 kg Area per deck: 5.2 m²; Machine fully reconditioned with new bearings. Brush cleaning / filter inserts of your choice: 0.1-5 mm. > > conversion and advanced construction possible.

Material: Stainless steel V2A Drive: 2,2 KW.

Material: Stainless steel 1.4301 Drive: 4 KW Weight: 1550 kg Area per deck: 2,6 m² Incl. 2 x ball knocking cleaning / 2 x sieve with mesh size choice: 0.1 5 mm.

Material: Stainless steel 1.4301 Drive: 5.5 KW Weight: 2050 kg Area per deck: 3.65 m² 2 x ball tap cleaning 2 x sieve with mesh size choice: 0.1-5 mm.

Material thickness: 42 mm Throat: 8000 mm MACH-id    442 MAKE         Faccin TYPE           BF 42 / 8 YEAR          1999 SPECIFICATIONS Throat        8000 mm Maximum sheet thickness Steel       42 mm Power          120 kW DIMENSIONS Length         10000 mm Width            3000 mm Height            7500 mm Faccin Flanging & Dishing Machine BF Ø  8000 x 42 mm for sale, this kind of machines are used to produce dishing head. We have also Faccin Dishing press for sale. This Faccin Heads Flanging machine has a cpacity of 42 mm. The Faccin BF range of flanging machines designed to be very easy to operate. This kind of mac ...

Material thickness: 42 mm Throat: 8000 mm MACH-id   4419 MAKE        Faccin TYPE          PPM 800 / 8 + MA 120 YEAR         1999 SPECIFICATIONS Controll        Conventionel Throat            8000 mm Maximum sheet thickness Steel        42 mm Power           120 kW DIMENSIONS          Length        10500 mm Width           2500 mm Height          7650 mm Faccin Dishing Press PPM + Manipulator MA 120 Ø 8000 x 800 Ton. The Faccin PPm series of hydraulic presses, guarantee superior forming accuracy and the highest reliability because they are designed with the exclusive hpt systym to mini ...

------------------

length in total:3000 mm weight of the machine ca.:600 kg dimensions of the machine ca.:5150 x 900 x 1250 mm

weight of the machine ca.:340 kg dimensions of the machine ca.:2470 x 700 x 1300 mm

Conveyor length: 0 mm Belt width: 0 mm Drop height: 0 mm

Conveyor length: 0 mm Belt width: 0 mm Drop height: 0 mm

Schwadenkondensator Miwe SK II - 0003 YOC: 2010 used steam condenser for Miwe Aero in-store ovens more than 20 pieces immediately available in stock. -completely in stainless steel -Miwe steam condenser -suitable for Miwe Aero, Miwe Condo, Miwe Econo etc. -230 Volt 1/N/PE -0.2 kW -50 Hz -Years of construction from 2005 to 2016 -External dimensions: Width: 90cm Depth: 85cm Height: 19cm

Material thickness: 0 mm Throat: 7000 mm

Material thickness: 5 mm Throat: 800 mm CNC Brand: _Unknown / Other CNC Model: Leico PNC Playback MAKE   Leifeld Ahlen Germany TYPE     PNC 106 YEAR SPECIFICATIONS Controll     LEICO PNC Playback Maximum sheet thickness Steel    3 mm Maximum sheet thickness Alu    5 mm Max. Bank ø in the gap    700 mm Max. Working length     800 mm Working speed     3800 Power     7.5 kW DIMENSIONS Length    3000 mm Width     2500 mm Height    2200 mm Leifeld PNC   106 CNC spinning lathe Ø 700 x 800 mm for sale, we have also some other metal spinning machines for sale

Material thickness: 12 mm Throat: 4450 mm MAKE   Leifeld Ahlen Germany TYPE    PLB 1800 LEICO YEAR   70 er SPECIFICATIONS Controll   Conventionel Hydraullic Maximum sheet thickness Steel  10 mm Maximum sheet thickness Alu  12 mm Max. Bank ø in the gap   4450 mm Max. Blank ø over bed   2400 mm Max. Working length     2000 mm Working speed   2 - 300 Power  51 kW

Material thickness: 2 mm Throat: 2800 mm SPECIFICATIONS Controll  Conventionel Maximum sheet thickness Steel  2 mm Maximum sheet thickness Alu  3 mm Stroke´s No./ Min.225 - 2800  

Material thickness: 12 mm Throat: 4000 mm SPECIFICATIONS Controll  Conventionel Maximum sheet thickness Steel  10 or 12 mm Max. Bank ø in the gap  4000 mm Power 37 kW DIMENSIONS Length  4000 mm Width 1200 mm Height  2400 mm Faccin Flanging machine dishing press, dished ends production, shipyard press,  

Material thickness: 1 mm Throat: 1 mm Face milling with interchangeable inserts Driven feeding system Plate detection sensor Variomatic speed range over inverter Double amorization system New price EUR 20.000 Length:830mm Width:750mm Height:1550mm Weight:250kg Power 3kw Speeds up to 820 Rpm Cutting angle 30 - 60 Grad Plate thickness 1 - 40 m  

Inv. Num. : 7155 Type: UR4-4DD-UF6 Producer: HMP Created: 2000 Parameters: Max. diameter: 25 mm Components: Reducing hammers with 4 segments 6-segment roll forming hammers

Haver & Boecker SWA/MECII-20 Loading Device Haver & Boecker SWA/MECII-20 Loose loading device with scale for loading trucks or wagons with bulk goods Suitable for free-flowing non-dusty bulk materials Description Brand: Haver & Boecker Type: SWA/MECII-20 Year: 2003 Temperature limits: -10°C / 40°C Voltage: 230V Frequency: 50 Hz Pneumatic pressure: 5 bar; Max 40 kg Min 10 kg Dimensions: Section I L2.43 x W187 x H310 Section II L240 x W240 x H310 Haver Nettowage with frame Weighing and evaluating electronics MEC II-20 to control weighing and/or machine functions Advantages • high ease of use • easy programmability • PTB and OIML approval • 99 product type memories • User guidance via plain text display in 6 selectable languages Bt 15 operator terminal For automatic remote variety adjustment, including motor adjustment of the bag length/width  ...

Flat waffle machine Haas SWAK 72 including arch cooler Manufacturer: HAAS Model: SWAK 72 Machine No.: 11351 Dimensions baking plate: 460 mm x 290 mm Number of baking plates: 72 Weight Net: 17,000 kg Length: 11,705 mm Height machine head: 2,030 mm Height machine body: 1,600 mm Machine is currently still in production and is sold together with an archcooler. Hebenstreit/Haas/Danger

HAAS SWAK 40 for waffle chopsticks Manufacturer: HAAS Model: SWAK 40 Factory number: 18812 Waffle blade dimensions: 460 mm x 315 mm 40 baking plates - 120 rods per baking plate Dimensions: Net Weight: 10,200 kg Length: 6.665 mm Height machine head: 2,030 mm Height baking machine: 1,290 mm Gas oven HAAS RAISES DISPUTE DANGER

Flat waffle machine HAAS SWAK 64 Haas/Hebenstreit Price £75,000 Built around 1980 Location Germany Dimensions: -Height: 1500 mm -Height machine head: 2200 mm -Width: 1300 mm -Wide machine head: 1860 mm -Length: 12,000 mm Power supply: -Power: 4 kW -Power: 3x380 V -Number of baking plates: 64 -Engraving: 2.5mm x 0.5mm -Plate size: 460 mm x 290 mm -Leaf thickness: 2.8 mm-3.0 mm -Efficiency: 450-500 kg/8 h -Weight of leaf: 55 g/leaf -Baking time: 2:20 min Machine is sold together with the arc cooler and is currently in storage.

Sisma SWA 300 Welding Machine Average power : 300 W All maintenance has been done Lamps have been changed recently

Sisma SWA 300 Welding Machine 300 W Spare lamps are included Machine is in good working condition

Sisma SWA 150 Welding Machine 150 WATT Machine is in very good condition Maintenance has been done regularly

Flat wafer machine HAAS SWAK Price € 90,000 Year of construction approx. 1996 Location: Poland - Number of baking plates: 72 - Engraving: Tiefcarre - Panel size: 460 mm x 290 mm - Blade thickness: 5.1 mm Only the baking machine without any additional accessories is sold. Haas / Hebenstreit

Sisma SWA 150 Laser Welding Machine Machine is in very good condition A very precision special machine developed in italy especially for the repair of injection molds. Periodic maintenance has been done regularly It was used as the representative companys display machine at the fair. it continues to weld without problem for approximately 10 hours a day since 2017. we want to sell it only because it does not melt wires thicker than 0.5 mm.

Connected load: 21.7kVA, length: 1700mm, width: 1400mm, height: 1735mm, weight: 590kg, with extraction, a second machine is available as a source of spare parts, a visit is possible.

sanding belt length:max. 470 mm workpiece dia.:600 mm table - swivable:0 - 6 Grad taper:Reitstock Morse 2 turning speed range::1260 - 3100 U/min table movement:längs 470 mm tool taper:schwenkbar 0-6 °, 90° dre total power requirement:0,4 kW weight of the machine ca.:950 kg dimensions of the machine ca.:1100 x 1100 x 1500 mm Documents:vorhanden

GeneralHSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - scraper-type chip-conveyor and bed-flushing; Control: 3D-control Heidenhain iTNC 530 HSCI Technical DataSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical1-90000/1-90000/1-90000 mm/minRapid traverse longitudinal/transverse/vertical90/90/90 m/minWorking area 1Longitudinal750 mmCross600 mmVertical560 mmTool changerApplicationVertical Type of magazineWheel Type of gripperPick up Number of tools30 Floor space/WeightDimensions (L x W x H)6,65 x 7,6 x 3,18 mWeight approx.12000 KgSplash guard equipment/cabinSplash guard equipment/cabin with illumination and sliding doors on operators side and front sideMotor spindle with HSK-A 63Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWSpeed range - 18.000 rpmSpindle ...

GeneralHSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - scraper-type chip-conveyor and bed-flushing; Control: 3D-control Siemens 840D sl Operate Technical DataSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical1-90000/1-90000/1-90000 mm/minRapid traverse longitudinal/transverse/vertical90/90/90 m/minWorking area 1Longitudinal750 mmCross600 mmVertical560 mmTool changerApplicationVertical Type of magazineWheel Type of gripperPick up Number of tools30 Floor space/WeightDimensions (L x W x H)6,65 x 7,6 x 3,18 mWeight approx.12000 KgSplash guard equipment/cabinSplash guard equipment/cabin with illumination and sliding doors on operators side and front sideHSC75 linear 5-Axis SpecificationHSC 75 linear 5-Axis Specification clamping area Ø 750 mm, Ø 29.52 inch Tilti ...

GeneralTravelling column machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal3000 mmCross1100 mmVertical1050 mmFeed drives:Feed rate X / Y / Z80000/80000/80000 mm/minRapid feed X / Y / Z80/80/80 m/minNC-swivel head (B-axis)Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel torque: 3,300 / 2,300 Nm // 2,433 / 1,696 ftDynamic package for DMF 300|11 linearDynamic package for DMF 300|11 linear Linear motor X-axis with 80 m/min // 262.48 ft/min Rapid speed XYZ 80 m/min // 262.48 ft/min Acceleration XYZ 8 m/s² // 26.25 ft/s² Active cooling for Linear motorPackage Mill / Turn 12,000 rpm, HSK-A100Package Mill / Turn, 12,000 rpm HSK-A100 (Only available for Siemens 840D solutionline) NC-Mill-Turn-table d 1,050 mm  ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens Sinumerik ONE Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minIntegrated motor spindle speedMASTER®Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWTorque (100% DC) 86 NmTorque (40% DC) 130 NmSpeed range - 20000 rpmSpindle taper HSK-A 63 DIN 69893Clamping System HSK-A 63NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformationClamping pneumatic, two circuitsClamping pneumatics, 2 clamping circuits for standard machineTool clamping for HSK-A63Tool clamping HSK-A63 accordi ...

MAN TGX 26.480 6x2 Mileage: 712545km Engine/Assistance Systems -D2676LF45 - 480 hp / 353 KW EURO6 SCR-2300Nm(2500 with TopTorque) C-R New -Electronic speed limiter 89 km/h + 1km/h Cruise Control Tolerance -Low noise certificate for Austria and L- sign • COP document • Exhaust gas confirmation Euronorm • CEMT certificate • National approval documentation Germany noise measure 80 dB (92/97EEC) -Fuel filter -Start-up aid -HA Air -HA differential lock -Fuel tank aluminium 800l right and 60l AdBlue • Fuel tank attachment • Lockable tank cap • 1 pc. ventilated for Simultaneous locking - AdBlue tank cap lockable 1 piece -MAN BrakeMatic (electronic braking system) -Emergency Brake Assist 2 (EBA2) -Anti-lock braking system (ABS) -Traction Control (ASR) -Electronic Stability Program (ESP) -Gearshift MAN ComfortShift -Transmission ZF 16 S 23 ...

Shop oven Miwe Aero 4.0604 closet Miwe Aero AE 4.0604 shop oven with proofing cabinet, digital control Miwe Aero shop oven is characterized by outstanding baking result and high functionality.Sheet metal inserts are easily removable for cleaning even superficially, the Miwe Aero is very easy to maintain and clean. Easy operation by Miwe FP control with up to 30 baking programs.Integrated swath apparatus with clock and full swath program for fast and rich swaths.The viewing windows are with cool double glazing and bright lighting for the baking chamber. Miwe aero shop oven Type: AE 4 0604 digital Miwe FP control for 4 sheets 60x40cm with closet with swath destroyer Year of construction 2005 specifications: 400V / 230V / 50Hz 8.5 kW Dimensions with hood: Height: 178cm Width :90cm Depth: 100cm

cutting diameter: 570 mm saw band length: 7250 x 41 mm cutting width: 1,3 mm capacity 90 degrees: square: 550 x 550 mm capacity 90 degrees: flat: 550 x 700 mm total power requirement: 4 kW weight of the machine ca.: 6050 kg required space: 2600 x 1300 x 3700 m The KLS 550 x 700 is a semi-automatic and column guided horizontal bandsaw. Standard specifications - Swarf Brush - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Blade Breakage Switch - Stop System - Automatic Ball Screw Lubrication - Led Lighting - Swarf Conveyor - Swarf Carrying - 1400 mm Feeding Drive - Double Roller Table - Material End Detector - Program Saving System - USB Connection Output - PLC Control & Touch Screen - Inverter Optional specifications - Laser Line - Lubrication Mist - V Shape Vice - Extra Double Roller Table - Upper Clamp System - Curve Cutting Detecting Sensor The pictures are for o ...

cutting diameter: 650 mm saw band length: 8200 x 54 mm cutting width: 1,6 mm Capacity 90° - rectangle: 650 x 850 mm Capacity 90° - square: 650 x 650 mm total power requirement: 5,5 kW / 2775 Nm weight of the machine ca.: 6400 kg dimensions of the machine ca.: 2700 x 1500 x 4100 mm The KLS 650 x 850 is a semi-automatic and column guided horizontal bandsaw. Standard specifications - Swarf Brush - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Blade Breakage Switch - Stop System - Automatic Ball Screw Lubrication - Led Lighting - Swarf Conveyor - Swarf Carrying - 1400 mm Feeding Drive - Double Roller Table - Material End Detector - Program Saving System - USB Connection Output - PLC Control & Touch Screen - Inverter Optional specifications - Laser Line - Lubrication Mist - V Shape Vice - Extra Double Roller Table - Upper Clamp System - Curve Cutting Detecting Sensor  ...

GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal400 mmCross400 mmVertical375 mmTechnical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightWeight approx.6800 KgDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mSpindle speed 28.000 rpm HSK-A63Spindle speed 20 up to 28.000 U/min Motor spindle with shaft cooling power 30/20 kW // 40.23hp/ 26.82 hp (40/100% DC) torque 40/27 Nm (40/100% DC) tool clamping HSK 63 according to DIN69893 (different from standard)Chain-type tool magazine 60 po ...

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal700 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWTorque (100% DC) 41 NmSpindle taper BT 30Speed range 20 - 15000 rpmTorque (40% DC) 48 NmClamping System ISO 7388-3 - JD30ToolchangertoolchangerType of magazine DiskNumber of tools 25Integrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Rotary joint, 4-channels Inclusive Software packageProduction package band filter ICS 40ba ...

GeneralUniversal Milling Machine; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal650 mmCross520 mmVertical475 mmFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgTechnical DataType of main driveAC Drive power (100% DC)30 kWDrive power (40% DC)46 kWSpeed range20 - 15000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minSpindle speed 15,000 rpm, 200NmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring sy ...

GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)16 kWDrive power (40% DC)21 kWSpeed range20 - 15000 rpmSpindle taperSK40 Tool holder DIN ISO 7388-1-A Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring systemSpindle speed 15,000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp / 21.5 hp) Torque 111 Nm / 85 Nm (82 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 ...

Gebr. Electric floor oven Quail Infra AE 516/48, overhauled, 5 floors, new heating rods for swaths and stove chamber, outer walls in stainless steel, new seals, swaths overhauled, baking surface per floor: 60 cm wide, 160 cm deep, lower floor with pull-out stove, 39.9 kW, strain gauge control, with new baking plates