| Direct measuring system |
Direct path measuring system |
| Spindle speed 15,000 rpm |
Motor spindle speedMASTER® HSK-A63 Spindle speed
20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp / 21.5 hp) Torque 111 Nm
/ 85 Nm (82 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) |
| NC swivel rotary table |
Swivel Rotary Table for simultaneous machining
Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to
+110°, rotary axis 360° including direct measuring system for B- and
C-axis and working plane transformation |
| Tool magazine 60 pockets |
Tool magazine 60 places HSK-A63 Vertical chain
with double gripper incl. set up station for tool loading |
| Swarf conveyor, with cleaned slot
screen |
Swarf conveyor, scraper type with cleaned slot
screen |
| Internal coolant supply 40bar/600l |
Internal coolant supply (ICS) with paper type
filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon
incl. cabin roof, rotary joint in spindle, double cartridge filter
50µm for internal coolant (differently from standard) |
| Coolant-air blast change-over |
Coolant - Air-blast changeover external switchable
via M-Function |
| Chip flushing for working area |
Chip flushing for working area rinsing line on the
right side panel, backside of machine bed, cabin left and right
activated or deactivate by M function´s (only in combination with
internal coolant supply, not with 20 bar ICS) |
| Rotating clear-view window |
Rotating clear-view window (only available with
option cabin roof) |
| Mechanical Preparation Oil-mist
separator |
Mechanical preparation for connection of an oil
mist separator on customer side opening in cabin ø150mm |
| Infrared measuring probe TS460 |
Infrared touch probe make Heidenhain TS 460 |
| Laser tool measuring |
Laser tool measuring, fix mounted at machine
column Tool lenght and diameter measuring automatically cleaning
through external airblast Calibration tool with taper |
| Preparation 3D Quickset |
Machine preparation for use of the 3D quickSET
Toolkit. included is the Softwareoption for 3D quickSET for one
machine. 5 axis machine configurations (only with option touch
probe) |
| MPC Machine Protection Control |
MPC Machine Protection Control Machine protection
by quick shutdown |
| Signal lamp 4-colour |
Signal lamp 4 colour Red: general error Yellow:
intervention necessary Green: automatic mode Blue: set-up mode |
| proTIME |
proTIME Visualisation of remaining runtime,
remaining workpieces and the machine state |
| DMG MORI Interface PROFIBUS |
DMG MORI Interface PROFIBUS loading door at right
machine side PROFIBUS communication between robot and machine for
loading cycle 2 channel safety circuits Only in combination with an
additional clamping method option!. |
| Prep. for robot actuated clamping system
control |
Preparation for robot actuated clamping system
control max. 4 channel rotary joint Media connection on the face side
of the table an actuation of clamping system by machine in single mode
is not possible |
| Exhibition design DMU50 3rd
generation |
Exhibition design DMU 50 3rd chiller of electrical
cabinet painted in electrical cabinet color; lighting of tool
magazine; DMG-MORI set of labels; paper version of electrical
plan |
| Operation mode 4 |
Operation mode 4 Process monitoring in the
production Manual intervention with open doors of machining area.
Release after check list has been filled in. |
| Package for tropical climate for
speedMASTER® |
Package for tropical climate for speedMASTER®
for ambient temperature max. 50°Celsius: includes active cooling for
electrical cabinet, active cooling main spindle drive / motor
spindle |
| IoTconnector |
IoTconnector The IoTconnector allows the use of
online services of DMG MORI (e.g. NETservice) |
| Machine Data Connector |
Machine Data Connector (MDC) Uniform machine data
D4452871 interface. |
| NETservice |
NETservice Qualified support by Internet-based
remote diagnostics |
| Messenger V4 |
Messenger V4 Clear presentation of the machine
live status. |
| Service Agent |
Service Agent Overview of all maintenance work on
the machine |
| Special equipment |
- 1 set of standard mounting elements -
Preparation for connecting a Robo2Go - Clamping hydraulics with 2
independent clamping circuits - IO-NIO distinction - Documentation on
data carrier |
| Robo2Go Milling |
Flexible workpiece loading and unloading system
with a six-axis-industrial-robot - Replaceable workpiece storage
incl. workpiece trays: - Max. 38 pieces up to 100 x 100 mm
(3.96 in) - Max. 9 pieces up to 200 x 200 mm (7.87 in) -
M |
| Module 35 kg |
Module 35 kg - Max. load of the robot 35 kg
(77.16 lbs) - Gripper base with outlet lance - Gripper towards the
gripper base rotatably Note: Indicated is the maximum load of the
robot in the tool center point. The maximum workpiece weight is
dep |
| 2-jaw gripper |
2-jaw gripper for Quadar - Gripping area with jaw
adjustment system 20-195 mm - Gripper stroke 6 mm per jaw |
| 2-jaw gripper |
2-jaw gripper for Quadar - Gripping area with jaw
adjustment system 20-195 mm - Gripper stroke 6 mm per jaw |
| Pressure adjustment |
Pressure adjustment - Manual adjustment of
gripping pressure for each gripper(A and B) individually in the
range of 2.5 - 6 bar - Mounted on robot arm |
| Hoist |
Hoist for the transport of the complete system by
a crane, consisting of: - 3 attachment points |
| Robot in white exterior paint |
Robot in special paint calcite white (RAL
9010) |
| Attention: Preparation for automation is
necessary |
Attention: Preparation for automation is necessary
For the connection of the Robo2Go the machine needs to be prepared
with the electrical interface. |
| Overall declaration of conformity
Siemens |
Overall declaration of conformity according to
Machine directive 2006/42/EC, for the system Robo2Go + machine with
Siemens The supplementary technical documentation of the declaration
of overall conformity consist of: - An overview drawing of the
ma |
| Special equipment |
Tandem KSH plus 160 clamping device with base
plate - Base plate round 0290 x 52.8 mm Design: steel, milled
Including centering bolt and Positioning pin for Alignment and
mounting screws 1 pc TANDEM KSH plus 160 Product features: - Centric
e |