| Spindle speed 28.000 rpm
HSK-A63 |
Spindle speed 20 up to 28.000 U/min Motor
spindle with shaft cooling power 30/20 kW // 40.23hp/ 26.82 hp
(40/100% DC) torque 40/27 Nm (40/100% DC) tool clamping HSK 63
according to DIN69893 (different from standard) |
| Chain-type tool magazine 60 pockets |
Tool magazine with 60 positions, chain type with
double gripper (differently from standard) |
| Direct measuring system |
Direct path measuring system |
| Cabine |
Full protection cabin |
| 3D Quick SET |
3D quickSET Tool kit for control and compensation
of the cinematic accuracy of 5 axis machine configurations (only with
option touch probe) |
| Signal lamp 4-colour |
Signal lamp 4-colour Red: general error Yellow:
intervention necessary Green: automatic mode Blue: set-up mode |
| Internal coolant supply 40 bar /
600l |
Internal coolant supply (ICS) with paper type
filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon
air purge for linear measuring system, bed flushing double cartridge
filter 50µm for internal coolant |
| Oil and emulsion mist separator |
Oil and emulsion mist separator mechanical |
| Extended swarf flushing |
Extended swarf flushing Additional flushing of the
working area door left hand side, y axis and right cabin wall volume
of the flushing adjustable manual (only in combination with internal
coolant) |
| Double cartridge filter,25 µm |
Double cartridge filter, Finesse of filtration 25
µm (only in combination with internal coolant) |
| EROWA Automation Interface PH 150 / PH
CELL |
Automation interface PH 150 / PH CELL for EROWA
zero point clamping system consisting of: Interface (Profibus) via M65
Working table with 4-channel rotary joint Automatic loading door
Control of EROWA (MTS / UPC) Zero-point clamping system Automation
Soft |
| Air blast through spindle centre |
Air blast through spindle centre selection with M
function maintained air (1 Drop Oil per 8min) (in combination with ICS
possible) |
| proTIME |
proTIME Visualisation of remaining runtime,
remaining workpieces and the machine state |
| Exhibition design eVo |
Exhibition design DMU eVo chiller of electrical
cabinet painted in electrical cabinet color; lighting of tool
magazine; DMG-MORI set of labels; door media supply; paper version of
electrical plan |
| Safety glass at operators door |
Laminated safety glass at the operators door,
side glass polycarbonate preferably for combination with automation
cabin |
| Operation mode 4 |
Operation mode 4 Process monitoring in the
production Manual intervention with open doors of machining area.
Release after check list has been filled in. |
| Safety package for power failure (incl.
IPC) |
Safety package for power failure: Package for
power failure IPC CELOS (for proper shutdown of IPC); Overvoltage
limiter, Undervoltage monitoring with fast deceleration control |
| 3D data model |
3D data model in STEP format for integration in
CAD System by the customer. It is used for machine simulation.
(shipping against signed non disclosure agreement) |
| NETSERVICE (CELOS) |
Netservice Qualified support by Internet-based
remote diagnostics |
| Digital Manufacturing Package |
Digital Manufacturing Package (1) IoTconnector
Allows the use of the Online services from DMG MORI (2) Machine Data
Connector (MDC) Standardized machine data interface Protocols: OPCUA,
MTConnect, MQTT (3) NETservice Qualified support through
internet-b |
| SERVICEcamera |
SERVICEcamera Camera set incl. accessories
(Antenna, charger, incl. SD card) |
| Messenger V4 |
The latest version of DMG MORI Messenger displays
D4452871 web based the machine live status. It allows to analyze the
machine run-time, downtime, alarms in individually configurable
dashboards and transparently shows the actual status in the
manufacturing shop |
| Service Agent |
Service Agent Overview of all maintenance work on
the machine |
| Special equipment |
Mold package linear incl. B-/C-Torque dynamic
package V-toothed Eagle belts in the Z-axis B-/C- Torque table (swivel
rotary table with star grooves) incl. ATC with weight specification
High end cooler for machine; AVD - Heidenhain Top Speed - Siemens
SMC |
| Special equipment |
Infrared touch probe Make Renishaw PP400
optical(OMP400) Pneumatic setup aid for tool loading Laser tool
measurement BLUM DIGILOG Measurement of tool length and diameter
automatic swiveling of the measuring unit below table level
Calibration mandrel wit |
| Pallet loading / unloading system PH 150
FAMOT |
With handling arm and pallet magazine 1.
10-positions rotary pallet magazine 2. Max. load of the handling arm
up to 150 kg (including pallet weight) 3. Design in accordance
with the machine 4. 2 servo axes (X-axis and rotary table of magazine)
5. Pn |
| PH 150 FAMOT Integration-Kit for DMU 40
eVo |
PH 150 FAMOT integration kit for DMU 40 eVo
linear. Note: Machine must be equipped with CELOS. |
| PH 150 FAMOT system enhancement to max.
250 kg |
PH 150 FAMOT system enhancement to max. pallet
load up to 250 kg Note: Please consider max. permissible table load
of machine tool. |
| Clamping station EROWA UPC-P |
Clamping station EROWA UPC-P for gripping pallets
on machine table for pallet size 320 x 320 |
| 5 x Aluminum pallet 320 x 320 EROWA,
smooth surface |
5 x Aluminum pallet 320 x 320 including clamping
pins Smooth surface of the pallet without mounting holes Clamping
system EROWA UPC-P |
| Remark: machine preparation for
automation |
Remark: The machine must be prepared for the
automation mode. Required option: Machine Preparation for DMG MORI
Pallet loading / unloading system PH 150 Regular option
Automation Package is not required. |
| Jobmanager - Control Comfort Plus |
Jobmanager - Control Komfort Plus includes
additional to the basic version different options more, to ensure a
better utilization and flexibility of the automation cell. - Selection
of multiple different NC-programs for one pallet; - Collecting
machine |
| CE declaration |
CE declaration for entire system (machine + PH 150
FAMOT). Note: Option is required for the following machines: - DMU 50
3rd generation, - DMU 40 / 60 / 80 eVo linear, - DMC 650 / 850 / 1150
/ 1450 V, - DMU 65 / 75 mB, - HSC 55 / 75 / 105 linear. |