sw 3 ha used for sale

Control cabinet - cooling unit, control cabinet air conditioning unit, distribution cabinet, heat exchanger spindle cooler -Manufacturer: Harbor, heat exchanger spindle cooler from CNC machining center Santenberg GTC S 2 -Type: HPW-10AR -Voltage: 110V 50/60Hz -Dimensions: 250/75/H580 mm -Weight: 5.7 kg

tubular heater, heating band, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating band -Manufacturer: Erge, heating band heating sleeve -Type: Z 1133 Ø 30 x 20 mm -Heating power: 250 W -Voltage: 230 V -Quantity: 1 piece available -Dimensions: 160/70/H50 mm -Weight: 0.1 kg

Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: HADEF, electric chain hoist with chassis and connection cable/main switch -Chain hoist: Type CH3, load capacity 2000 kg -Main stroke: 5 m/min -Fine stroke: 1.25 m/min -Chain length: 3.45 m -Crane chassis: Carl Stahl type 208/05, maximum beam width 232 mm -Number: 8x chain hoist available -Price: per piece -Dimensions: see photo and technical drawing -Transport dimensions: 1000/700/H540 mm -Weight: 90 kg/unit

Frequency converter, frequency converter, drive inverter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, inverter, servo drive, servo control, power supply -Manufacturer: Hauser, Servo Drive basic device -Type: 951-100200 Compax 0500-M -Number: 3x servo module available -Price per piece -Dimensions: 450/80/H350 mm -Weight: 6.8 kg/pc.

Frequency converter, frequency converter, drive inverter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, inverter, servo drive, servo control, power supply, servo amplifier -Manufacturer: Hauser, servo controller servo amplifier 2 pieces with rack -Type: HBV 750 SEO HBMR 55 A4-445 -Price/charge: complete -Total dimensions: 390/250/H310 mm -Weight: 8.4 kg

Clamping cylinder, hydraulic clamping cylinder, hydraulic clamp, hydraulic tensioner, swing clamp, hydraulic swing clamp -Hydraulic clamp: Hydraulic swivel clamps 11 pieces -Swivel clamp: Römheld 1885-104 -Three-way valves: Hawe DZ3-1R -Price/tax: complete -Dimensions: 220/65/H165 mm / 100/100/H100 mm -Transport dimensions: 560/370/H160 mm -Weight: 64 kg

drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, extension rails, heavy-duty extension, full extension ball guide -Manufacturer: Häfele, drawer rail ball guide full extension type 422.22.551 -Retracted length: 550 mm -Extension length: 550 mm -Load capacity: 150 kg -Quantity: 1x set available -Transport dimensions: 550/55/H40 mm -Weight: 3.3 kg

Electric motor, three-phase motor -Manufacturer: Hanning, electric motor type W22 WIMES Premium 160L-04 -Power: 18.5 kW -Speed: 1475 rpm -Voltage: 380/660 V -Shaft: Ø 50 x 235 mm -Shaft axis height: 260 mm -Design: B3 -Protection class: P 33 -Dimensions: 850/465/H465 mm -Weight: 247 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Hawe, hydraulic cylinder type PF 30/20 Z1108 -Stroke: 166 mm -Piston rod: Ø 22 mm / M16 x 1.5 -Hole diameter: 80 x 9 mm -Number: 6x cylinders available -Price: per piece -Dimensions: Ø 99 x 350 mm -Weight: 4.2 kg/piece

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Manufacturer: Haier, fan blower for air conditioning -Type: lKFD-35-1 -Voltage: 220 V / 35 W -Fan wheel: Ø 400 mm -Total dimensions: 400/190/H530 mm -Weight: 3.3 kg

Winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: GHD Görlitzer Hanf & Drahtseilerei, crane rope winch rope Ø 22 mm -Nominal strength: 1960 N/mm² -Rope type: 6x36WS-IWRC -Length: 60 m -Quantity: 1x wire rope available -Shipping/Price: complete -also other crane ropes: available -Transport dimensions: Ø 820 x 620 mm -Weight: 196 kg

transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer -Manufacturer: Yoen, three-phase transformer type 20-0442NGG -Power: 11 kW -Voltage: Pri. 400V/sec DC 48 V -Technical data: see photo type plate -Dimensions: 855/620/H680 mm -Weight: 197 kg

Winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: GHD Görlitzer Hanf & Drahtseilerei, crane rope winch rope Ø 22 mm -Nominal strength: 1960 N/mm² -Rope type: 6x36WS-IWRC -Length: approx. 53 m -Number: 4x wire rope available -Price: per roll -also other crane ropes: available -Transport dimensions: Ø 750 x 560 mm -Weight: 187 kg/piece

Track roller, steel roller, guide roller, support roller, cam roller -Manufacturer: Harhues & Teufert, cam roller type KEHT 130PP unused Ovp -Art.No.: 95173 1048 1462 -Mounting: Ø54 mm / M42x3 -Number: 4x cam roller available -Price: per piece -Total dimensions: Ø 130 x 135 mm -Weight: 6.3 kg/piece

Switch cabinet cooling unit, switch cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling unit, switch cabinet cooler -Manufacturer: Siemens, control cabinet cooling unit from CNC milling machine MAHO MH 800C -Type: K1000 -Voltage: 230V -Power consumption: 700 W -Dimensions: 155/1100/H455 mm -Weight: 48 kg

Square broaching tool, multi-wedge broach, broaching tool, broaching needle, grooving tool, keyway broaching tool, keyway broaching needle -Manufacturer: HS Hasseay Savage, broach push broach -Type: 11620 J9 HSS M-2 -Keyway width: 20 mm -Quantity: 1 piece available -Dimensions box: 495/50/H50 mm -Weight: 2.8 kg

Square broaching tool, multi-wedge broach, broaching tool, broaching needle, grooving tool, keyway broaching tool, keyway broaching needle -Manufacturer: HS Hasseay Savage, broach push broach -Type: 11518 18MM V -Keyway width: 18 mm -Quantity: 1 piece available -Dimensions box: 395/40/H40 mm -Weight: 1.3 kg

Square broaching tool, multi-wedge broach, broaching tool, broaching needle, grooving tool, keyway broaching tool, keyway broaching needle -Manufacturer: HS Hasseay Savage, broach push broach -Type: 11622 J9 HSS M-2 -Keyway width: 22 mm -Quantity: 1 piece available -Dimensions box: 495/50/H50 mm -Weight: 2.8 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Haack / Bruckner / Röhm, rotating centering points 3 pieces -Type: Röhm 114H MK6 / 2x without type designation -Recording: MK6 -Price/Delivery: complete -Transport dimensions: 390/360/H120 mm -Total weight: 33.1 kg

Height-adjustable pallet truck, pallet truck, stacker, pedestrian pallet truck, forklift truck, high-lift truck, pedestrian stacker -Manufacturer: Hanselifter, high lift truck type EDH1030MG-E 06 -Bemerjung: without battery -Load capacity: max. 1000 kg -Lifting height: 3000 mm -Height: 2010 mm -Width: 800 mm -Clearance height: 2050 mm -Tines: length 1145 mm / 160 x 55 mm -Dimensions: 1740/800/H2010 mm -Own weight: 544 kg

Precision lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: VDF Heidenreich Harbeck, lead screw and feed screw lathe type 24R0 -Machine bed: hardened -Turning length: 1230 mm -Rotation diameter over bed: 500 -Turning diameter over support: 290 mm -Spindle bore: Ø 56 mm -Spindle speeds: 19 - 2000 rpm -Wedge bar chuck: Forkardt Ø 250 mm -Tailstock mount: MK4 -Drive: 5.5 kW -Accessories: 1x bezel, 7x Multifix tool holders, see photos -Dimensions: 1180/3050/H1345 mm -Weight: 1907 kg

Quick-change chuck, quick-change holder, quick-change head, keyless drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, attachment holder -Manufacturer: DRGM Hässner, quick-change chuck holders 10 pieces -Type: Morse -Receiving sleeves: 3x MK4 / 3x MK3 / 2x MK2 / 2x MK1 -Shipping/Price: complete -Transport dimensions: 320/150/H220 mm -Weight: 14.7 kg

Column jib crane, overhead crane, workstation crane -Manufacturer: Hans-Hebetechnik, Column jib crane type SSA 125-3.8, lifting capacity 125 kg -Large base plate: 1000 x 1000 mm -Projection: 2,530 mm -Total height: 3,935 mm -Hook height: 2680 mm -Swivel range: 270° -Chain hoist: HADEF type CH1 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 3935/1000/H1000 mm -Empty weight: 550 kg

Column jib crane, overhead crane, workstation crane -Manufacturer: Hans-Hebetechnik, Column jib crane type SSA 125-3.8, lifting capacity 125 kg -Large base plate: 1000 x 1000 mm -Projection: 2,530 mm -Total height: 3,935 mm -Hook height: 2690 mm -Swivel range: 270° -Chain hoist: Demag type DCM-PRO 2 250 H2.8 V -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 3935/1000/H1000 mm -Empty weight: 540 kg

Threading machine, bench drill, pillar drill -Manufacturer: Hagen & Göbel, HG 6 type tapping machine with solid base -Clamping table: 350 x 290 mm -Travel distance: 310 mm -Spindle mount: Ø 12 mm -Projection: 235 mm -Speeds: 710/1120/1800/2800 rpm -Column: Diameter 85 mm -Spindle stroke: 35 mm -Motor: 0.37 kW Accessories: incl. machine vice, see photos -Dimensions: 685/490/H1340 mm -Weight: 212 kg

Oil filling station, compressed air pump for fresh oil, remote oiling apparatus, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, centrifugal gear oil pump -operated: pneumatically -Reel -Hose: 6 m - Manual valve with flow indicator -Number: 3x pumps with reel available Price: per piece -Weight: 60 kg/piece

Vacuum filling machine, vacuum filler, sausage filling machine, dividing and twisting device -Handover: in its current condition as inspected -Process: Filling-Portioning-Twisting-Hanging -Program control: -Turning gear: -Turning nozzle: Ø 10 x 400 mm -Dimensions: 3400/1000/H1500 mm -Weight: 860 kg

winch, lifting winch, construction winch, anchor winch -mechanical winch -Loading force switchable: 1,250 kg / 5,000 kg -with freewheel and mechanical brake -Drum: Ø 300 mm -Side windows: Ø 600 mm -Drum length: 800 mm -Operation: via hand lever Quantity: 3 pieces available, 1 piece winch with Ø 12 mm rope Price: per piece -Dimensions: 1200/1200/H950 mm -Weight: 684 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: 65 mm -Piston rod: Ø 45 mm -Stroke: 600 mm -Piston rod mounting: M30 x 1.5 mm - universally applicable: can be used -Quantity: 1 cylinder available Price: per piece -Dimensions: 110/1430 mm -Weight: 30 kg/piece

Process controller, controller, temperature controller, temperature sensor, temperature setting -Type: Bitric M1-B -Setting value: from 0 to 400 °C -Auxiliary power: 220 V 50/60 Hz 5 VA -Output: 1x changeover contact max. 220 VAC 4 A 900 W -Price: per piece -Quantity: 3 available -Weight: 1.1 kg

BBA Pumps BA150KS DriveOn® – Diesel-driven sewage pump | DEMO MACHINE, We offer a demonstration machine of the reliable and efficient BBA Pumps BA150KS DriveOn® — a professional dry self-priming sewage pump, ideal for the contracting and rental market., Pump specifications, Max. Capacity 400 m³/hour, max. head 27 mwc, connection DN150 (6), debris passage 100 mm, and a screw channel impeller for vibration-free pumping — even with air bubbles or high speed., , DriveOn® diesel engine (Stage V), Maintenance interval of 1,500 operating hours — 66% less maintenance than conventional engines. Variable speed 1,300–1,700 rpm, engine power

The BA75 is a 3-inch mobile dirty water pump and suitable for pumping contaminated water with dirt particles up to 42 mm. The centrifugal pump is equipped with its own vacuum system and thus dry self-priming. A modern and economical diesel engine complies with current European emission legislation. The super silent casing is made for use in densely populated areas where noise level, safety and limited space are important issues, , MAX capacity :100m3/h, MAX head : 17 mwk, Free passage : 42mm,, , Throughput capacity: 100 m3/h, Max dirt passage: 42 mm, Max. head: 17 MWK, Max dirt passage: 2800 rpm, Weight: 875 kg, , = More information =, , Year of manufacture: 2023, Empty weight: 875 kg, Connector size: 4 inch, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren  ...

Inv. Num. : 9047 Type: VF 0 Producer: HAAS Created: 2001 Parameters: Work table length: 660 mm Work table width: 356 mm Maximum table load (uniform): 1361 kg Maximum vertical spindle speed: 7500 1/min X-axis travel: 508 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3630 kg

Manufacturer: Hackemack UV Trockner 1 Lampe 1300 mm, Type: 2008 Umgebaut, Year: 2000+2008, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 80, Working widht max mm: 1400, Number of lamps: 1, kW power 1 lamp: ca.10, kW power all lamps: 15, Lampenlänge mm: 1450, Reflektor von oben abnehmbar: yes, Lamps straight installation: yes, Elektronische Leistungregelung: yes, Position of lamps: gerade, Conveyor lenght mm: ca.3000, Conveyor lenght mm: ca.3000, Outer belt width mm: 2400, Feeding speed m/min: 6-30, Drive power kW: 1,2, Feedin speed m/min: 6-30, Year :2000+2008

Manufacturer: Haberkorn, Type: FZS-SD, Year: 1994, Work piece width min-max mm: oben, Min.-max. workpiece length in mm: 400, Min.-max. workpiece height in mm: 3, Trimming saw: 2800, Working hight mm: 252, Vertikal spindle: 40, Working range Z-axis mm: 220, Length lifting spindle mm: 1, Diameter of the spindle mm: 40, Trimming saw: 2800, Travels of spindle: 2, Milling spindle kW: +/- 65 °, Working length max mm: ca. 7,5 Fräswelle, Max. working depth in mm: 2000, Main engine kW: yes, Feeding speed max m/min: yes, Feeding - manually: 2 Druckluft-Spanner, Feeding speed continous adjustable: 1x100 + 1x 180, Mitre Window: 2225x1720x1835, Year :1994

Manufacturer: Hackemack, Type: KTR 20/40, Year: 1995, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 400, Min.-max. workpiece height in mm: 3-80, Working widht max mm: 1350, Working width min min mm: 400, Number of lamps: 1, kW power 1 lamp: 15,6, kW power all lamps: 15,6, Lamps inclined installation: no, Lamps straight installation: yes, Lamps from below: no, Position of lamps: fest, Abluftmenge cbm/h: 1200, Conveyor lenght mm: 2500, Working widht mm: 1350, od distance mm: 100, Conveyor lenght mm: 2500, Outer belt width mm: 1750, Working hight approx mm: 920 +/- 50, Conveyor: Stange, Exhaust air diameter mm: 160, Working widht mm: 1350, Working height in mm: 920 +/- 50, Length mm: 2500, Through running hight mm: 80, Thermal output: 15,6, Feedin speed m/min: regellbar, Rod transportation: yes, Belt conveyor: no, Exhaust air m³/h: 1200, Fresh air m³/h: 1200 ...

Manufacturer: Haberkorn, Type: FZS-SD, Year: 1994, Work piece width min-max mm: oben, Min.-max. workpiece length in mm: 400, Min.-max. workpiece height in mm: 3, Trimming saw: 2800, Working hight mm: 252, Vertikal spindle: 40, Working range Z-axis mm: 220, Length lifting spindle mm: 1, Diameter of the spindle mm: 40, Trimming saw: 2800, Travels of spindle: 2, Milling spindle kW: +/- 65 °, Working length max mm: ca. 7,5 Fräswelle, Max. working depth in mm: 2000, Main engine kW: yes, Feeding speed max m/min: yes, Feeding - manually: 2 Druckluft-Spanner, Feeding speed continous adjustable: 1x100 + 1x 180, Mitre Window: 2225x1720x1835, Year :1994

General SKU356S855 MakeHasler AG (CH) TypePowder dosing unit No.14175/ 13540 Year of construction1997 LocationBarneveld Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume200 Ltr. Motor1.5 KW Specified Features - Powder filler Closed stirring vesselcheck Capacity200 Ltr Vessel sizesdia. 600x1350mm Conical bottomcheck Flat top sidecheck With covercheck Top connectionsDN 150 (1x), DN25 (3x) Outletdia.72mm Max. temperature160 degr.C. With paddle stirrercheck Motor1,5 KW, 220-240/380-415 Volt (Ex) Powder fillers MaterialStainless steel 1.4435 (316L) Information Floorspace0,9x0,9 M Total height2,4 M Weight650 Kg ATEX compatiblecheck Extra Specificationswith TURBODISK type 75 /360degr. sprayer, Capacity 80 Ltr/H (2 bar), Material HastelloyPowder fillersHaslerPackaging machines > Powder fillersBrand > Hasler What y ...

pressure: 90.0 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke of upper beam: 135 mm dayligth: 180 mm throat: 350 mm working feed: 8.0 mm/sec return speed: 68.0 mm/sec work height max.: 805 mm back stop - adjustable: max. 620 mm Control: ENC 310 oil volume: 100 l total power requirement: 7.5 kW weight: 5840 kg range L-W-H: 4000 x 2040 x 2450 mm from a maintenance workshop very good conditions () - in checked conditions - machinevideo - https://www.youtube.com/watch?v=PIiHc2e7h28 Features: - NC electro-hydraulic press brake - with DURMA NC control ENC 310 Illuminated LCD display X-axis control & value display Y-axis control & value display - Swiveling operator panel, front left - NC controlled axes: Y1/Y2 + X - NC electro-motorized backgauge (X-axis) with 2x manually adjustable backgauge fingers including lateral and height adjustment (Z+R axes) - NC electro-moto ...

General SKU900WP093 MakeHaake TypeUWK 90, Type 003-3978 Mach.No.003-3978 LocationBarneveld Extra Specifications231 V, 50 Hz, IP20, CE certifiedTemperature control unitsThermo HaakeHeat exchangers > Temperature control unitsBrand > Thermo Haake What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

hydraulic shears Type: HSLX 4008 Manufacturer: Haco Year: 2019 max. cutting thickness: 8mm cutting length: 4050mm rear motorized automatic stop length 1000mm automatic rebound of the rear stop automatic hydraulic adjustment of the cutting gap and cutting angle according to the thickness of the material programmable cutting length hydraulically adjustable pressure of the holders electric motor 15 kw number of cuts 11/min total length 5200 mm machine width 3700 mm machine height 1880 mm total weight 10,000 kg table height 880 mm touch graphic screen 5.7" memory capacity of 500 programs CNC system SC100 Machine in good condition, under power Find more here - / Contact us at -

Overview The brewhouse was manufactured in 2017 by the Czech company HANSTEEL s.r.o.. With it, 5 hl can be produced. Technical details Two-chamber brewhouse with electric heating system. Nominal volume: 500l Total volume: 550l Brewhouse is mounted on separate frame with stainless steel stairs and platform Incl. cooler from Alfa-Laval: cooling of 500l in 1h from 99°C to 12°C Butterfly valves on the chimneys Agitators in both vessels with frequency converter to change the speed Strainer bucket with level sensor for automatic water refilling control of the brewhouse via a touch screen display accessible from the working platform the app needed to control the brewhouse can be installed on a portable device (e.g. tablet) and the operation of the brewhouse can be controlled remotely There is also a possibility to offer for sale open fermenting vats with a nominal volume of 1000 l (total volu ...

BBA Pumps BA150KS DriveOn® – Diesel-driven sewage pump | DEMO MACHINE, We offer a demonstration machine of the reliable and efficient BBA Pumps BA150KS DriveOn® — a professional dry self-priming sewage pump, ideal for the contracting and rental market., Pump specifications, Max. Capacity 400 m³/hour, max. head 27 mwc, connection DN150 (6), debris passage 100 mm, and a screw channel impeller for vibration-free pumping — even with air bubbles or high speed., , DriveOn® diesel engine (Stage V), Maintenance interval of 1,500 operating hours — 66% less maintenance than conventional engines. Variable speed 1,300–1,700 rpm, engine power

Size: 530 mm Equipments: Coate with IR and UV dryers 21 Inch max. width shee roller flood coater with anilox spare applicating rollers included

Key data: 6500 kN, 80 mm

Clamping force: 650t Year of construction: 2024 Injection Unit .../4630 Screw diameter 80 mm Spec. Spray pressure 2090 bar Injection volume 2212 cc Hydr. Drive power 113 kW L/D Screw Ratio 22 Clamping Unit 6500/... Clamping force 650 t Lights spar spacing 1040 x 910 mm Ejector force 110 kN Tool installation height 400 mm Opening way 950 mm Max. panel spacing 1350 mm Ejector path 250 mm Weight 27000 kg Year of construction 2024 Control type KEBA 2985 Clamping unit Two-plate technology – hydraulic clamping force Fast tool movement due to two diagonal cylinders Tool protection function Linear guide for BWAP (MAIII PLUS, MA-F) Set of spray nozzles Closing and opening of the mold (max. 5 stages, min. 3 stages) Tool height limitation via limit sensor Clamping plates according to Euromap standard Ejector reset function Display of ejector p ...

Offered is a universal tool grinding machine: Speed: 2800rpm, grinding range: approx. 30-50mm diameter, grinding wheels: cup or dish wheels, weight: approx. 450-500kg, machine dimensions X/Y/Z: approx. 800mm/800mm/1500mm. Inspection possible by appointment.

Semi-automatic slicer / slicer GRAEF HA 800 / DEKC3 Technical data: 400 Volt / 50 Hz / 2.4 A / 500 W Knife diameter: 300 mm Stainless steel knife Incl. knife sharpener Machine with CERA 3 coating Machine weight: 59 kg Year of manufacture: 2018 Knife speed 229 rpm Feed rate 260 mm Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call.

Offer 26401 Technical data: - Operation via handheld remote control with cable - Load capacity 4000 kg - Platform size 2500 x 820 mm - min. Lift table height 230 mm - max. Lift table height 990 mm - Stroke 785 mm - Lifting speeds with / without load 25 / 15 mm/s - Countersinks with / without load 40 / 35 mm/s - Hydr. drive 400 V / 2.2 kW - Space requirement approx. W 2580 x D 840 x H min. 230 mm - Weight approx. 360 kg

Offer 26109 Technical data: - Operation via handheld remote control with cable - Load capacity 2000 kg - Platform size 2500 x 820 mm - min. Lift table height 205 mm - max. Lift table height 990 mm - Stroke 785 mm - Lifting speeds with / without load 25 / 15 mm/s - Countersinks with / without load 25 / 20 mm/s - Hydr. drive 400 V / 2.2 kW - Space requirement approx. W 2580 x D 840 x H min. 250 mm - Weight approx. 270 kg

Syringe Dispenser Diluter HAMILTON MICROLAB 715-DIL 600 Series recent equipment that was used in demonstration only. ML635-BZ Unit With ML700 Advanced Controller Accuracy: ±1% Dimensions (WxDxH): 177.8 x 139.7 x 266.7 mm Power supply frequency: 50/60 Hz Max. voltage240 V No. of syringes ; 2 Weight 5.9 kg