127,825 used machines on RESALE, but how to find them? Machine Search
Very robust and compact 1-fold eyelet machine, electric table unit in top condition. Designed for 5.5 mm eyelets. Stock goods, immediately available.
Paper drilling machine Hang 114-30-4; good condition; cleaned and tested; 4 drill heads; drill lubrication; drilling cooling; speed regulation; Table lifting speed adjustable; Drilling distance 36-260mm; Insertion depth 6-130mm; Insert height max.65mm; endless drilling tape; Table size 600x480mm; new table; new hood; new belts. Paper drilling machine 114-30-4; good condition; cleaned and checked; four heads; drill cooling; lubricating device; variable drill speed; table lift speed adjustable; adjustable drill offset 36-260mm; insertion depth 6-130mm; stack height 65mm; cardboard band under drill; table size 600x480mm; new table; new cover; new belts.
Wood oven Habomat 20 wood pellets Häussler as good as new Häussler Habomat 20 -Voltage: 230 volts -Frequency: 20 Hz -Current: Ignition phase: 7.3 A Operating: 0.81A -Rated thermal input: 35 kW -Fuel: Wood pellets HP5 -Year of construction: 2016
WP Haton, Rototherm, bakery oven, brand: WP Haton; type: Rototherm; rotation oven: yes; description: turning circle 1260 mm; room dimensions . approx. 1080x1650x1980mm; equipped with digital readout with touch-key operation - 3 ovens
Modernised machine with new LTG control system StoreControl L currently 6 identical machines available Exterior Dimensions: Height 4889 mm Overall width 2785 mm Overall depth 2810 mm Total payload machine up to 2 x 15,000 kg 63 carriers with center bar for up to 400 kg payload each in clear usable dimensions: W = 2460 mm T = 825 mm Usable height up to 55 to 750 mm Start of the operating opening in 875 mm above OKFF, then 875 mm high Engine power Vertical drive 6 kW / 400 Volt Horizontal drive 0.55 kW / 400 Volt Colour scheme grey/blue Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries
Multi-purpose gripper, sorting gripper, gripper for weight class 7.5 - 13to unused! Manufacturer Haener Baumaschinen Model HSOG500 Condition Unused, never been in use, year of construction 2022 Weight class 7.5–13t Opening width 1500 mm Height 943 mm Width 600 mm Clamping force 48 kN/bar Net weight approx. 520 kg Operating pressure 300 bar Capacity per litre 40 L/min Stock Special price
We offer an LTG-TowerMax L 20.0-250-2460-825-6440 storage system modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 6440 mm Overall width 2850 mm Installation depth 2900 mm Total payload machine up to 2 x 10,000 kg 52 carriers with center bar for up to 400 kg payload each in clear usable dimensions: W = 2460 mm T = 825 mm Usable height up to 55 to 750 mm Start of the operating opening at 900 mm above OKFF, then 800 mm high Engine power Vertical drive 4 kW / 400 Volt Horizontal drive 0.5 kW / 400 Volt Colour scheme grey/blue, galvanised carrier Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries
Multi-purpose grabs, sorting grabs, grabs for weight class 2.5–3.8t unused! Manufacturer Haener Baumaschinen Model HMZG200R Condition Unused, never been in use, year of construction 2022 Weight class 2.5–3.8t Opening width 944 mm Height 601 mm Width 400 mm Clamping force 19 kN/bar Net weight 200 kg Operating pressure 250 bar Capacity per litre 15 L/min Compact Rotator Stock Special price
We offer an LTG-TowerMax L 20.0-250-2070-825-6680 storage system modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 6680 mm Overall width 2400 mm Installation depth 2885 mm Total payload machine up to 2 x 10,000 kg 37 carriers for up to 250 kg payload each in clear usable dimensions: B = 2070 mm T = 825 mm Usable height up to 57 to 750 mm Start of the operating opening in 900 mm above OKFF, then 825 mm high Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.55 kW / 400 Volt Colour scheme grey/grey, galvanised beam Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries
Multi-purpose grabs, sorting grabs, grabs for weight class 3.5–6.5t unused! Manufacturer Haener Baumaschinen Model HMZG300R Condition Unused, never been in use, year of construction 2022 Model HMZG300 Weight class 3.5–6.5t Opening width 1206 mm Height 747 mm Width 505 mm Clamping force 29 kN/bar Net weight 300 kg Operating pressure 300 bar Capacity per litre 25 L/min Rotator Thumm 605 Stock Special price
We offer LTG-TowerMax L 30.0-250-2460-825-8450 storage systems modernized by us with a completely new StoreControl L control system. currently 13 of 17 identical aircraft are still available Exterior Dimensions: Height 8450 mm Overall width 2805 mm Overall depth 2810 mm Total payload machine up to 2 x 15,000 kg 50 carriers for up to 250 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 2460 mm T = 825 mm Usable height up to 57 to 750 mm Start of the operating opening at 890 mm above OKFF, then 800 mm high; hand-operated lifting door, Engine power Vertical drive 5 kW / 400 Volt Horizontal drive 0.55 kW / 400 Volt Colour scheme creamy white/blue, galvanised backing Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently ...
W&P Haton Cone Circular Moulders Cones and knitting channels with Teflon without lubrication on request completely overhauled with newly teflosinated cone mobile on wheels with brake 380 volts
We offer LTG-TowerMax P 4.9-245-20-325-4600 paternosters modernized by us with a completely new StoreControl P control system currently 2 identical machines available Exterior Dimensions: Overall height 4,600 mm Overall width 3,420 mm Installation depth 1,620 mm 20 carriers with a payload of 245 kg each in clear usable dimensions: H = 325 mm W = 2,910 mm T = 595 mm Chain jump 381 mm Total payload up to 4,900 kg Side table in 1000 mm above OKFF with NiRo worktop, 300 mm deep, manually operated lifting door Colour scheme grey/grey Motor power drive 2 x 1.5 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries
Hedge trimmer for excavator attachment for weight class 1–6to unused! Manufacturer Haener Baumaschinen Model HHE120 Condition Unused, never been in use, year of construction 2022 Weight class 1–6t Width 1.200mm Net weight 48 kg Operating pressure 180 bar Liter capacity 18-21 L/min Stock Special price
We offer a paternoster LTG-TowerMax P 2.9-105-28-215-4220 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 4,220 mm Overall width 3,270 mm Installation depth 1,150 mm 28 carriers with a payload of 105 kg each in clear usable dimensions: H = 215 mm W = 2,850 mm T = 410 mm Chain jump 254 mm Total payload up to 2,940 kg Side table in 900 mm above OKFF with NiRo worktop, 300 mm deep, manually operated lifting door Colour scheme grey/grey, carrier anthracite Motor power drive 2 x 1.1 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries
We offer a paternoster LTG-TowerMax P 2.9-149-16-400-4220 with a completely new StoreControl P control system. Exterior Dimensions: Overall height 4,220 mm Overall width 2,600 mm Installation depth 1,150 mm 16 carriers with a payload of 149 kg each in clear usable dimensions: H = 400 mm W = 2,260 mm T = 410 mm Chain jump 254 mm Total payload up to 2,940 kg Side table in 900 mm above OKFF with NiRo worktop, 300 mm deep, manually operated lifting door Colour scheme grey/grey, carrier anthracite Motor power drive 2 x 1.1 kW / 400 Volt subject to errors and technical changes, photo of an identical machine, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries
We offer a paternoster LTG-TowerMax P 7.2-250-29-215-4730 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 4,730 mm Overall width 3,270 mm Overall depth 1,680 mm 29 carriers with a payload of 250 kg each in clear usable dimensions: H = 215 mm W = 2,730 mm T = 620 mm Chain jump 254 mm Total payload up to 7,250 kg Side table in 900 mm above OKFF with NiRo worktop, 300 mm deep, manually operated lifting door Colour scheme grey/grey, Motor power drive 2 x 1.5 kW / 400 Volt subject to errors and technical changes, photo of an identical machine, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries
We offer an LTG-TowerMax L 30.0-500-1300-1270-6000 storage system modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 6000 mm Overall width 1620 mm Overall depth 4150 mm Total payload machine up to 2 x 15,000 kg 20 carriers for up to 500 kg payload each in clear usable dimensions: W = 1300 mm T = 1270 mm (special depth) Usable height up to 50 to 750 mm Start of the operating opening in 300 mm above OKFF, then xxx mm high, with manually operated lifting door, Engine power Vertical drive xx kW / 400 Volt Horizontal drive xx kW / 400 Volt Colour scheme beige/beige, galvanised straps Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries
We offer LTG-TowerMax L 30.0-400-2460-825-4889 storage systems modernized by us with a completely new StoreControl L control system. currently 6 identical machines are available Exterior Dimensions: Height 4889 mm Overall width 2785 mm Overall depth 2810 mm Total payload machine up to 2 x 15,000 kg 63 carriers with center bar for up to 400 kg payload each in clear usable dimensions: W = 2460 mm T = 825 mm Usable height up to 55 to 750 mm Start of the operating opening in 875 mm above OKFF, then 875 mm high Engine power Vertical drive 6 kW / 400 Volt Horizontal drive 0.55 kW / 400 Volt Colour scheme grey/blue, galvanised carrier Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries
turning diameter over bed: 540 mm turning diameter over slide rest: 270 mm turning length: 2500 mm spindle passage: 60 mm turning speeds: 600 U/min Rapid travel: steady for max. workpiece diameter from: 270 mm steady for max. workpiece diameter from: 170 mm faceplate: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
From September 2022 immediately available newly overhauled Multigrind HT retrofit machine prepared for resharpening hobs / worm gear cutters / pushers and cutting rotor Control: Siemens 840 D X - axis 650 mm Y - axis 400 mm Z - axis 280 mm A - axis (dividing apparatus) 360 ° SK50 C - axis (rotary table) 270 ° X3 - axle with tailstock Grinding spindle: HSK50 Dressing unit Tool changer: 10-fold magazine plate Coolant system: Turbo Separator Suction: LTA Extinguishing system Other accessories: Available ex works Software: Customer-specific delivery Financing / hire purchase possible.
Machine Details Stock number 1105-03796 Machine type CNC lathe Make HARDINGE Type ELITE II 8/51 Year of construction 2006 Control type CNC Control FANUC 21 I TC Storage location FRANCE Country of origin UK Delivery time by arrangement from location Off-site freight base, uninsured Technical details Turning diameter 340 mm Turning length 350 mm Control FANUC 21 I TC Speed 5,000 rpm Drive power 11 kW Number of tools 12 pcs. Number of revolvers 1 Tool holder VDI 30 Information Clamping device main spindle 3 BAKENchuck Tailstock Programming system fanuc 21 I TC 3 AXIS WITH LIVE TOOLS VERY NICE MACHINE CHIP CONVOYER
; Gross weight [kg]: 2630; Inspection Date: 2025-12-12; Amount of previous owners: 1; Lift height[mm]: 1000; Maximum lift capacity [kg]: 300
Hakon Sliding Rack System – Professional storage solution for glass, sheets, and large-format materials This used Hakon sliding racking system is ideal for companies in the glass, metal, or sheet metal processing industries that require safe, organized, and space-saving storage. The racking is robust, slides smoothly, and is designed for intensive daily use. Technical Specifications Brand: Hakon Type: RBM 225er/3T/30 Year of construction: 2018 Construction: Welded steel frames, industrial grade Operation: Manual sliding system Length: 10.635 meters Width: 3.16 meters Height: 2.13 meters Maximum size: 550 x 3,210 mm Capacity: 10 bucks Connection: 230V (standard plug) Fuse: 16A Condition: As new, fully functional, ready for immediate use ⭐Key Benefits Space-saving: Sliding frames ensure maximum storage on minimal floor space Safe & organized: Materials remain ...
Maschine zur Belüftung von Sahne. Effizient, in sehr gutem Zustand. Bei Interesse nehmen Sie bitte Kontakt mit mir auf.
; Gross weight [kg]: 860; Inspection Date: 2025-12-12; Amount of previous owners: 1; Maximum lift capacity [kg]: 230
; Gross weight [kg]: 7300; Inspection Date: 2026-02-06; Amount of previous owners: 1; Maximum lift capacity [kg]: 230
; Gross weight [kg]: 7300; Inspection Date: 2026-02-06; Amount of previous owners: 1; Maximum lift capacity [kg]: 230
used
Key data: 75 KW, 400 V
Combined heat and power plant (CHP) HBG 75 – Electric hail – 75 kW – YOC 2014 For sale is a combined heat and power plant type HBG 75 – E 0836 TE312 from the manufacturer Elektro Hagel, built in 2014. Technical data: Manufacturer: Elektro Hagel Type: HBG 75 – E 0836 TE312 Year of Make: 2014 Operating hours: approx. 65,000 h Engine: Gas gasoline engine, four-stroke Generator: Leroy Somer LSA 44.2 M95 C6S/4 Generator type: air-cooled synchronous generator Voltage: 400 V Electrical power: 75 kW Thermal power: 93 kW Total rated heat output: 196 kW Equipment: Launch system Gas pressure regulator and safety range Switchgear with PLC control Flue gas system with heat exchanger (AWT) Soundproofing Condition & History: Approx. 65,000 operating hours All maintenance was carried out regularly by a specialist company The ...
; Gross weight [kg]: 1730; Inspection Date: 2026-03-23; Amount of previous owners: 1; Lift height[mm]: 620; Maximum lift capacity [kg]: 350
; Gross weight [kg]: 2330; Inspection Date: 2026-03-23; Amount of previous owners: 1; Lift height[mm]: 815; Maximum lift capacity [kg]: 450
Manufacturer: Haeusler Type: VRM HY 4000 x 45 Stock number: 0973 Year of construction: 2001 Bending length: 4000 mm Bending strength: 45 mm Bending (cold): 38 mm Drive power: 100 kW Number of reels: 4 Adjustable rollers: 3 Type of adjustment of the rollers: hydraulic Top roll diameter: 710 mm Underroll diameter: 640 mm Side roller diameter: 520 mm Working speed: 2+4 m/min (up to 8m/min) Machine weight (with roller): 78 t Accessories Electronic synchronization Air-cooled oil cooler Upper support device Side cylinder support device (10t) Inlet table (20t) hydr. Bubble storage Cone bending device
Integrated system with 3 Bitzer compressors 4PES-10Y-40P and switch box TK compound or normal cooling compound system. Price on request.
Universal machine for elongating wheat doughs, mixed wheat and rye doughs (30% and 70% rye), rye doughs without a rolling table. Technical data: Weight range: 200-2000 gr Machine capacity: up to 2500 pcs/hour at 1000 gr Rounding length: 560 mm Dimensions (L x W x H): 5520x1100x1500 mm Weight, net: 880 kg Connection value: 1.5 KW Advantages: Gentle elongation due to the correct choice of the length of the elongation path, 3-stage dough processing: rolling, rolling, shaping, Low dough fatigue, Modern design, Quick and easy maintenance of the machine, stainless steel housing, Feeding hopper with adjustable opening.
Harro Höfliger MKT 120 horizontal end load cartoner, intermittent motion, bucket infeed, with GUK FA21/4 Cartonac 91 leaflet feeder, glue closure with Nordson ProBlue 4 hot melt unit, minimum carton size 15 x 15 x 60 mm up to maximum 100 x 80x 200 mm, mechanical output up to 120 cartons per minute.
working length: 2451 mm Working width: 2170 mm Working height: 800-1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ---------------------------------------------- base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor system for wood lengths from 300mm to 4200mm - Conveyor system for wood widths up to 240mm Roller conveyor - infeed - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG cross conveyor - Cross conveyor with 6 traverses - Conveyor belts PVC coated (green) 50mm wide, guided in plastic tracks - Continuously driven cross conveyor approx. 5 - 20m/min - Drive via geared motor 0.37kW ...
Machine Details Stock number 1105-03825 Machine type CNC lathe Make HARDINGE Model ELITE 8/51 Year of construction 2003 Control type CNC Control FANUC 21 I TC Storage location HAGUENAU FRANCE Country of origin UK Delivery time by arrangement from location Off-site freight base, uninsured Technical details Turning diameter 340 mm Turning length 350 mm Control FANUC 21 I TC Speed 5,000 rpm Drive power 11 kW Number of tools 12 pcs. Number of revolvers 1 Tool holder VDI 30 Information Clamping device main spindle 3 BAKENchuck Tailstock Programming system fanuc 21 I TB 3 AXIS WITH LIVE TOOLS VERY NICE MACHINE CHIP CONVOYER
Machine Details Stock-No. 1105-03826 Type of machine CNC Lathe Make HARDINGE Type CONQUEST 42 Year of manufacture 1992 Type of control CNC Storage location FRANCE Country of origin USA Delivery time by arrangement from location Freight basis from location, uninsured Price Technical details turning diameter 264 turning length 353 mm control FANUC 18 TB turning diameter over slide 284 mm turning speeds 500 rpm Rapid traverse 20 m/min power capacity 15 kW Number of tools 12 pcs. Tail Stock Progr. Barrel Additional information GOOD MACHINE FANUC CONTROL 3 AXIS MMACHINE WITH LIVE TOOLS TAILSTOCK
; Gross weight [kg]: 7040; Inspection Date: 2026-03-30; Amount of previous owners: 1; Maximum lift capacity [kg]: 230
Screen bucket 355mm unused Manufacturer Haener Model HSL280 MS03 ECO S355 Type screen bucket with quick-release frame MS03 Type Skeleton Excavator Bucket (Unused) Capacity 140 litres Weight 86kg
; Gross weight [kg]: 7300; Inspection Date: 2026-03-30; Amount of previous owners: 1; Maximum lift capacity [kg]: 230
; Gross weight [kg]: 8120; Inspection Date: 2026-03-30; Amount of previous owners: 1; Maximum lift capacity [kg]: 230
; Gross weight [kg]: 11710; Inspection Date: 2026-03-30; Amount of previous owners: 1; Maximum lift capacity [kg]: 230
We have about 50 different guide rails, different length/width and height for sale. The guide rails are HSS and HSS with HM. Partly new or used . Please contact us so that we can make you an offer.
maximum number of results exceeded
please refine your search
