sv 300 used for sale

engine lathe, year 2007, CNC 8055 TC. Used machine. More info & price on IndustrialBuyer.

grinding diameter: 200 mm profile depth: 30 mm workpiece length - max.: 2790 mm grinding length: 2310 mm Maximum pitch of the screw: -/+ 50 ° Maximum number of gears: 1-999 workpiece weight max.: 250 kg z-travel: 3000 mm x-travel: 185 mm max. dia. of grinding wheel: 450-330 mm Grinding wheel thickness (with recess): 20-70 mm roll diameter: 120 mm Speed of the grinding wheel spindle: 1500 - 6000 U/min Workpiece spindle speed: 0 - 600 U/min Speed of the pitch axis: 0-4 1/min Speed of the dressing spindle: 1500-16000 1/min feed speed z-axis: 0-10000 mm/min feed speed x-axis: 0-10000 mm/min total power requirement: 150 kVA control: Siemens Sinumerik 840D SL weight of the machine ca.: 30 t dimensions of the machine ca.: 10,65 x 5,37 x 2,75 m Features/Accessories: - Filtration system: KNOLL VL1500/5000 - many accessories—list to follow - documentation The data for this ad was create ...

table size: 3000mm x 1500mm; pressure: -0,85 bar; machine length: 3100mm; machine width: 1450mm; weight: 425kg;

working table size: 3000 mm x 1500 mm; emergency stop switch: no; operational vacuum: -0,85 bar; vacuum pump output: 40 m³/h; pump capacity: 1,5 kW; noise level: 70 Db; heating system temperatur: max. 200 °C; heating system: 16 kW; machine length: 3100 mm; machine width: 1650 mm ; machine height: 1100 mm; weight: 850 kg; Membrane vacuum presses of TF series are specially designed for preheating and shaping of solid surface materials (Corian, Hi Macs, Staron, Hanex, Kerrock and others), as well for acrylic material and for thermoplastic forming. TF series vacuum presses are combined solution of including functions of two separate machines: vacuum press and preheating oven, and this greatly increases functionality of the press.  Thermoforming Preheating and 2D and 3D vacuum forming of thermoplastic and acrylic materials. Production of worktops, sinks, shells, bar counte ...

Plate bending machine 3 ROLL HYDRAULIC MODEL 3000 X 40 MM - YEAR 1997 PLATE BENDING ROLL PLANETARY DESIGN PYRAMID DUAL PRE-PINCH Nameplate Bending capacity -Plate width : 3000 mm -Rolling plate thickness: 40 mm -Prebend thickness: 30 mm --- minimum rolling ID 550 mm depending on plate thickness and width Rolls dimensions: -Useful length 3100 mm -top roll D 450 mm -side rolls D 410 mm Accessories installed: Central upper support hydraulic control to hold the plate formed into large diameters Side arm hydraulic to support the large diameter being formed Conical bending attachment with hydraulic control of the angle setting for cone rolling, cone bending stopper hardened pad swing-down on the drop-end of the machine. Technical d ...

TRUMPF HL 3006D – industrial 3 kW laser source / solid-state laser For sale is a used industrial laser source TRUMPF HL 3006D. The laser device comes from an industrial laser welding system and was used together with a TRUMPF TrumaWeld L1000. Technical data / equipment: Manufacturer: TRUMPF Model: HL 3006D Laser power: 3,000 W / 3 kW Industrial High Power Laser Source Version: HL-D series Separate cooling connections available Original TRUMPF documentation partially available Wiring diagram available Interface description available WinLas software manual available The device is currently in storage and is not connected. An up-to-date functional test or demonstration under power is therefore not possible at the moment. The laser source is offered separately. A matching TRUMPF TrumaWeld L1000 and an M.T.A. TAE 502 industrial cooling unit are also available separately.  ...

WJS NC 3000 T waterjet cutting machine was built in 2002 in Sweden by Water Jet Sweden AB. The high-pressure pump working with the machine has been regularly serviced using only the manufacturer’s original parts. The WJS NC 3000 T is designed for the precision 2D cutting of workpieces made from metal and non-metallic materials, such as ceramics, glass and acrylic. Cutting is performed using pure water or water with an addition of abrasive. The machine is equipped with four cutting heads. The third and fourth heads are mounted on a common Z-axis, with a spacing of 80 mm. This solution allows simultaneous cutting with three heads, which increases cutting efficiency and reduces production time. The WaterJet NC 3000 T is operated using an intuitive NUM 1040 CNC controller. The equipment also includes, among others, an abrasive tank with a feeder and a 100 HP high-pressure pump. All t ...

Standard configuration Machine ⦁ Stable C-frame for easy access ⦁ Coordinate guide for high-precision machining ⦁ Linear magazine with 19 tool stations, 2 clamps ⦁ Maintenance free drives ⦁ Repositioning device with programmable presser foot ⦁ Parts chute 500 x 500 mm ⦁ Good parts container ⦁ Chip conveyor ⦁ Automatic shutdown mechanism Cutting head ⦁ Electro-hydraulic punching head ⦁ Rotatable single tool adapter ⦁ 360° rotation of all tools ⦁ Programmable presser foot ⦁ Tool length compensation ⦁ Spray lubrication for punches ⦁ Vacuum slug removal ⦁ Forming Control ⦁ Open control system based on BOSCH PNC-B ⦁ Control panel with TFT colour screen 12.0” ⦁ Program management ⦁ Production plan ⦁ On-line help ⦁ Integrated technology data ⦁ Diagnostic functions Programming ⦁ Machine-oriented shopfloor programming Data transmission � ...

AGIE CHARMILLES CUT 3000 ist eine Drahterodiermaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Tisch 850×550 mm; Werkstück max 1050×650×250 mm; Tischbelastung 800 kg (400 kg mit Bad); Verfahrwege X 500 mm, Y 350 mm, Z 256 mm; Kegelschnitt ±30°; Draht Ø 0,10–0,33 mm; Oberflächenwert Ra 0,05 µm; Dielektrikum 1000 l. Technische Daten: 5 Achsen; Tischhöhe 1100 mm; Druckluft 6 bar; Versorgung 3×400 V 50 Hz; Leistung 9 kVA; Gewicht ~3800 kg; Abmessungen 2685×2115×2247 mm. Erreicht enge Toleranzen; Branchen: Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt, Medizintechnik Technische Daten ohne Gewähr

turning diameter over bed: 4000 mm turning diameter over slide rest: 3500 mm turning length: 30000 mm centre height: 2000 mm workpiece weight: 160 t bed width: - mm bed height over floor: - spindle turning speed range: 0,5 - 80 U/min main drive motor: - kW faceplate diameter: - mm Control: Siemens 840D total power requirement: - kVA weight of the machine ca.: 160 t 2006 modernized/Overhauled and equipped with: - 4-guides bedway - CNC Control Siemens 840D - Face Plate - Counter Stay The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

JUTEC 3000 Bending Machine -Year of construction 2021 -CE marking -Footswitch Dimensions: LxWxH 0.7x0.5x1.3 meters / Weight 200Kg

Arboga UM 3008 Drilling-Milling Machine -Drive: Gear (gear head) -Motor: 2-stage motor (3-phase / 380 V or 400 V) -Spindle speeds: 8 steps, 105–3,020 rpm -Tool holder: MK 3 (Morse taper 3) -Drilling capacity (steel): approx. 30 mm -Drilling depth (quill stroke): max. 130 mm (adjustable) -Max. distance spindle-table: 600 mm -Cross table dimensions: 585 × 245 mm -Adjustability head: height-adjustable and swivel in angle Dimensions: LxWxH 0.9x0.8x1.9 meters / Weight 600Kg

2 x Oerlikon Citoline 3000T welding machines

Lg.Nr. 25514 Defective Hydr. CN Press Brake Technical data: - Max. working length 3060 mm - Column passage 2690 mm - Max. pressing force 1300 kN - Max. distance table / plunger 370 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed idle max. 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 to 11 mm/sec - Total drive power 18 kW - Pneumatic connection 6 bar - Space requirement approx. W 3800 x H 2400 x D 2400 mm - Weight approx. 11500 kg - with: - with 6 axis CNC control DELEM - Two-hand control panel with foot switch - crowning device - Controlled backgauge with height adjustment 5 - 860 mm - Hydr. Upper + Lower - Tool Clamping - Die table displacement pneumatically supported Machine does not drive reverence because 2 axles right in the back gauge are without function, control module may ...

CONTROLS   CNC controls WORKING RANGE -WIRE CUTTING-   worpiece length max.: 1050 mm   worpiece width (max): 650 mm   workpiece height (max): 250 mm   X-axis travel: 550 mm   Y-axis travel: 350 mm   z-axis travel (vertical): 256 mm   U-axis travel: 140 mm   V-axis travel: 140 mm TABLE   workpiece load (max): 400 kg AXIS DRIVES   rapid traverse X: 3000 mm/min   rapid traverse Y: 3000 mm/min WIRE SYSTEM   wire diameter (min): 0.1 mm   wire diameter (max): 0.3 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2685 mm   space requirements -front/back-: 2115 mm   total height: 2247 mm   total weight approx.: 4500 kg Machine in excellent condition X = High-precision version Two CUT 3000X machines are for sale. Both machines are loaded by a centrally located Erowa robot.  ...

: gebraucht : 1996 : 090232 : ca. 2 Wochen ab Auftragse : Türkei : 16900 € : 1 : 3100 mm : 6 mm : 19 1/min : 1.5 ° : 14 : 1000 mm : 15 kW : 200 l : 3700 mm : 2250 mm : 2700 mm : 1830 mm : 5600 kg Swing-beam cutting design Motorized backgauge (1000 mm) with digital display Footpedal Central manual blade gap adjustment Cutting line illumination Wide support table with transfer balls 1 side gauge with scale, T-slot, and flip-stop 2 sheet support arms with T-slots Oil fill Light curtains at the rear of the machine THE BLADES WERE GRINDED Operating manual in German with EC Declaration of Conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONST ...

Offer 26308 Technical data: - Max. working width 3040 mm - max. material thickness at 40 kp / mm² strength 2 mm - Bending angle adjustment electronically 0 - 180 ° - Automatic follow-up control for a complete workflow - Highest working setting of the upper beam 250 mm - Largest opening width / stroke of the upper beam 350 mm - Height adjustability - bending beam 30 mm - the lower beam 90 mm - Upper beam drive 400 V / 1.5 kW - Bending beam drive 400 V / 4.0 kW - Space requirement approx. W 4450 x H 1650 x D 2100 mm - Weight approx. 3900 kg - with: - pointed rail + lower beam rail - E - Footswitch

UV dryer, Cefla UV 2000 - Manufacturer Cefla/Sorbini - Type UV 2000 M2 / TN3000 - Year of manufacture 2003 - Working width 1.300 mm (1.445) mm - Working height 900 + - 40 mm - Operating side right - Max. part height 70 mm - Number of tubes from above 2 pcs. - diagonally positioned tubes 2 pcs. - Suitable for mercury tubes - Suitable for gallium tubes - Tube power max. 120 W/cm - with belt transport - Length 3.000 mm - Width 2.300 mm - Height 1.500 mm - Volts, Hz 400 /50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/ - 5%

Prints and applies labels to the underside of packs, The VWS LPX Blow 4/300R prints a label and blows it onto the pack from below as it runs across the belt. Useful for trays and tubs whose top has to stay clear, or when you want information on the bottom as well as a top label., The machine was built in 2014 and sits on a stand with an 800 mm belt. It runs on 230 V., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/vws-lpx-bottom-labeller/, Type: Bottom labeller (print & apply), Application: Blow applicator from below, Belt: 800 mm, on stand, Electrical: 230 V, 50–60 Hz

Offer 26236 Technical data: - Max. working width 3040 mm - Max. material thickness ST 37 4 mm - Swing-out upper beam - Bending angle adjustment electronically pre-selectable 0 - 135 ° - Max. lifting height of the upper beam 350 mm - Lifting height of the upper beam can be electronically preselected - Adjustability - bending beam 125 mm - The lower beam 125 mm - Upper bolster drive 400 V / 4.0 kW - Bending beam drive 400 V / 5.5 kW - Space requirement approx. W 3950 x H 1600 x D 1200 mm - Weight approx. 4800 kg - with: - Footswitch - Bending rails - Backgauge

Serviced Continuous Butter Making Machine (CBM) equipped with a new Rittal control panel with simple and user-friendly controls. Stainless Steel frame execution. The machine is designed for the continuous production of sweet butter from cultured and / or sweet cream and is suitable for hygienic dairy processing applications. The CBM has a butter production capacity of approximately 3.000 kg per hour and is designed for an input of approximately 6.000 litres of cultered or / and sweet cream per hour (38/42% fat, pH of 4,5/4,8 and infeed temperature ± 10 - 13 °C). Completely electrically driven; Churning cylinder / Beater I: 37 kW, Churning cylinder II: 3 kW and Squeezer / Working section: 11 kW., The machine is equipped with a new Rittal electrical control panel, incorporating simple and clearly arranged controls for the main machine functions. The control panel includes:, - 3 x Danfoss ...

x-travel:6500/13150 mm y-travel:4000 mm z-travel:1250 mm w-axis:2250 mm table surface area:5500/12150 x 3000 mm max. workpiece weight:70.000/105.000 kg ram head dimension:480 x 510 mm milling spindle motor:63 kW max. torque on the spindle:3300 Nm tool taper:DIN 39871 AD ISO 50 milling head speed:6,3 - 4000 U/min feed speeds:1 - 24000 mm/min w-axis:1 - 6000 mm/min distance between columns:3500 mm passage:3000 mm total power requirement:120 kW weight of the machine ca.:245 t dimensions of the machine ca.:29,0 x 7,7 x 8,1 m Machine is in nearly new condition and was completely modernized in 2020! With CNC SIEMENS 840 D Automatic tool magazine for 153 tool positions Automatic milling head magazine for 6 milling heads Machining module ? straight ? straight long ? Machining module ? angle standard ? 4000 rpm, 144 x 2.5°, ISO 50 Machining module ? narrow angle extended ? 40 kW, 4000 rpm, 1800  ...

bore capacity in steel (diameter):63 mm arm length:2000 mm workpiece height max.:135 mm spindle stroke:400 mm reus:16 Stufen table-size:630 x 800 mm tool taper:MK 5 speeds:20 - 1600 U/min spindle feeds::0,04- 32 mm/U work table::800 x 630 x 550 mm total power requirement:5,5 kW weight of the machine ca.:6200 kg dimensions of the machine ca.:3100 x 1250 x 2500 mm Year:ca. 1990

bore capacity in steel (diameter):63 mm arm length:2000 mm workpiece height max.:135 mm spindle stroke:400 mm reus:16 Stufen table-size:630 x 800 mm tool taper:MK 5 speeds:20 - 1600 U/min spindle feeds::0,04- 32 mm/U work table::800 x 630 x 550 mm total power requirement:5,5 kW weight of the machine ca.:6200 kg dimensions of the machine ca.:3100 x 1250 x 2500 mm Year:ca. 1990

grinding diameter:600 mm grinding length:3000 mm centre height:315 mm workpiece weight max.:3000 kg work piece spindle speed:8 - 120 U/min grinding wheel motor:25 kW grinding wheel speed:45 m/sec grinding wheel width x diameter:750 x 80 mm table speeds:30 - 4500 mm/min feeds of grinding head:0 - 5 mm/min table swivelabel +/-:7,5 ° total power requirement:55 kVA weight of the machine ca.:18 t dimensions of the machine ca.:11,5 x 4 x 2,2 m - Internal grinding device - taper grinding up to 10,1° based on diameter - automatic grinding cycle - grinding wheels and flanges - dressing device - coolant attachment - dust exhauster, various steady rests

turning diameter:800 mm turning length:2965 mm max. turning dia. over saddle:520 mm spindle bore:92 mm turning speed range:3 - 1800 U/min spindle head:Größe 11 total power requirement:37 kW weight of the machine ca.:6,5 t dimensions of the machine ca.:5,2 x 2,2 x 1,9 m Teach In Control MTC-K 3-jaw chuck ROTAS Dia. 400 mm face plate RÖHM Dia. 630 mm 4-station toolholder system PARAT 1 fixed steady coolant attachment and chip conveyor

turning diameter:626 mm turning length:3000 mm Turning diameter:600 mm spindle bore:100 mm spindle turning speed range:2800 U/min weight of the machine ca.:18 t Machine overhold and retrofit in 2003 with SIEMENS 840 D control - NC steady rest - 12-fold revolving head - splash doors - tailstock - coolant device

x-travel:30000 mm y-travel:3600 mm z-travel:1900 mm milling head speed:1 - 4000 U/min spindle taper ISO:50 feed speeds:1 - 10000 mm/min rapid traverse:25 m/min milling spindle motor:46 kW total power requirement:85 kW dimensions of the machine ca.:45 x 8,7 x 5,5 ü.F. m with CNC HEIDENHAIN iTNC 530 autom. milling head indexing 2,5° floor plate field 31000 x 2500 mm ( 4 floor plates 6000 x 2500 mm + 1 floor plate 7000 x 2500 mm ) 2 chip conveyors, coolant attachment

material width:400 mm coil weight:3,0 t material thickness:0,5 - 4,0 mm coil internal diameter:460 - 530 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:50 mm no. of lower support rolls:12 no. of upper support rolls:10 diameter of support rolls:90 mm material cross-cut:1600 mm² speed of coil line:0 - 20 m/min power requirement:35,0 kW weight:10,5 t dimensions (WxDxH):10,0 x 2,5 x 2,9 m straightening machine:KRE 50.400/9 adjustment of straightening rolls :motoric insertion wedge:hydraulic adjustable decoiler:3000.1 snubber roll:hydraulic expansion:hydraulic sideway adjustment:motoric pivoting:manual roll feed:Servo; WVE 160/400 intermittant lifting:hydraulic

material width coil line:600 mm coil weight in kg:2 x 3000 kg coil internal diameter:460 - 630 mm coil external diameter:1500 mm material thickness coil line:0,5 - 3,0 mm Number of Straightening rolls:9 roll diameter:30 mm material cross-cut:1200 mm² weight:9,5 t Dimensions (WxDxH):4,3 x 2,6 x 2,6 m straightening machine:30.600/9 double decoiler:Kohler, 3000.2 ausiliary drive:hydraulic lag brake:pneumatic expansion:hydraulic snubber roll:hydraulic; motoric driven

Hydr. Guillotine shears ATLANTIC, ATS 3000, year 03, 25448 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 0.5 - 6 mm - Cutting angle adjustable mot. 0,5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 18 pcs - Motorized backgauge with positioning control SP8 10 - 750 mm - Stroke rate depending on cutting angle and cutting length 9 - 17 rpm - Hydraulic drive 400 V / 7.5 kW - Table height 770 mm - Space required including back gauge, without front support arm - approx. W 3750 x H 1600 x D 2450 mm - Weight approx. 4500 kg - with: - E-foot switch - Cut line illumination - Angle stop - 2 support arms - Rear area protection with side grille + light barrier

CNC lathe Okuma LU 45 M -3000 Control: OSP-P200L Year of Make: 2009 Internal machine no. 81 max. turning diameter 660 mm max. turning length 3,000 mm Spindle bore Ø 260 mm Spindle speed 2,800 rpm m Travels: X-axis 420 mm Z-axis 3,025 mm Spindle power: 30 kW Accessories - Chip conveyors - Tool turret with 12 places - Tools

directional control valve, hydraulic valve HOERBIGER SVN225BE08 PD 350 bar 24 V used, tested ! Dimensions: 105 x 75 x 40 mm

Hydraulic valve, directional control valve, solenoid valve HOERBIGER SVN221BE08PDF E1 ( SVN221BE08PDFE1 ) HB52904-003A/44 2903/12531 pmax.: 350 bar 24 V DC used, tested ! Dimensions: 190 x 160 x 40 mm

Valve terminal SMC 4 x SV1200-5FU 0.1 - 0.7 MPa Dimensions: 145 x 100 x 65 mm

Welding cylinder, pneumatic cylinder SAVAIR SV446-97 9227-0017-0065 stroke: 65 mm rod diameter: Ø 35 mm New ! Dimensions: 315 x 68 x 55 mm

Submersible Pump, Chemical Pump LOWARA Type: SVI802/16S11T/A Item No.: 10737152R Q: 6 - 12,Q 6 m3/h H: 25 - 13 m immersion depth: 680 mm pump base: Ø 180 mm pump flange: Ø 250 mm motor: 1.1 kW 230 / 400V IP55 stainless steel housing ! Dimension 1060 x 260 x 250 Mm

electromagnetic shut-off valve, solenoid valve DANFOSS SVS40/2 KE1,5DFL CK857 1019601 22011 DN40 PN16 220 V brass ! Dimensions: 260 x 200 x 150 mm

Throughput max. 125mm, Auction-ID: A1-50090-4

Auction-ID: A1-50513-126

Bread mixer with 2 x mixing tubs machine needs to be checked, probably a (sensor) piece. Auction-ID: A3-46133-17440

400 litre, Stock number: T3856, Litre: 400, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. of legs, Top: Dished, Bottom: Dished, Double jacket: Yes, Inspection cover: In top, Ø 280 mm, Working pressure: 2,7 bar, Inner diameter: Ø 750 mm, Outer diameter: D 770 mm, Total height: H 1200 mm

Power converter, power supply, power supply unit, switching power supply, power supply device, built-in power supply unit Manufacturer: Siemens, built-in power supply system SVS2 -Type: E24 G5/ 18 WRG -Order No.: 6EV 3053-OCC -Technical data: see nameplates and photos -Dimensions: 200/60/H245 mm -Weight: 1.9 kg

CNC unit for boring, routing and sawing Brand: Atemag Type: Function Line Vario Viso With adjustable angle 0 - 100° Max. drive speed 15,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 15 Nm Tool interfaces: combination ER 25 and saw, saw blade flange 30 mm Version with one single clamping screw, locking with the lever

Features: White EpE screw cap and gasket, 4 mL for LBC SVSN-C04-306 2/2 Sample Bottle Auction-ID: A1-50093-151

As well as vice Auction-ID: A1-50251-188

As well as vice Auction-ID: A1-50251-191

Power: 38kW Auction-ID: A1-40982-87

Manufacturer: Yanmar Model: SV100-2A-2PB Machine Type: Crawler Excavator / Crawler Excavator Year of Make: 2016 Operating hours according to the display: 5,196.9 h Serial / PIN number: YMRSV100KGAJ21021X Machine No.: 21021 Operating weight: approx. 10,360 kg Transport weight: approx. 10,285 kg Engine: Yanmar diesel engine Engine power: 51.7 kW 4-cylinder diesel engine Version with adjustable boom (2PB) Enclosed driver's cab Dozer blade Rubber track chassis Hydraulic quick coupler Including pictured backhoe bucket Additional attachment/bucket shown: CSERI CSL10B-1000 Attachment width: 1,000 mm Capacity: approx. 460 liters Weight of attachment: approx. 295 kg Tooth/receptacle type according to nameplate: U20S Attachment year: 2014 Max. permissible pressure according to nameplate: 200 bar CE marking available Machine is in used good condition appropriate for its ag ...