126,719 used machines on RESALE, but how to find them? Machine Search
Process chiller / chiller air-cooled, Type: TAEevo Tech 351 P5-offAD bypass MTA S.p.A. TAEevo Tech 351 P5-offAD Bypass are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Including crank pan heater, electronic expansion valves, phase monitoring, buffer tank 350 liters and built-in P5 high-pressure pump. Extras: - Open filling system/ tank attached - Bypass with manual valve between water inlet and outlet Cooling capacity kW 66 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 11.2 Available pump pressure (bar) 4.68 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 39 Max. Current (A) 68 Starting Current Circuit (A) 213 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 108 ...
RECON -Part Number: 1605919 - Diesel ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.
Process chiller / chiller air-cooled, Type: TAEevo Tech 351 P5-offAD bypass MTA S.p.A. TAEevo Tech 351 P5-offAD Bypass are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Including crank pan heater, electronic expansion valves, phase monitoring, buffer tank 350 liters and built-in P5 high-pressure pump. Extras: - Open filling system/ tank attached - Bypass with manual valve between water inlet and outlet Cooling capacity kW 66 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 11.2 Available pump pressure (bar) 4.68 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 39 Max. Current (A) 68 Starting Current Circuit (A) 213 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 108 ...
Key data: 300
Dürr Eco+Energy ORC 300 HT. 2016 - 500 Hours Model: Eco+Energy ORC 300 HT KWK Year: 2016 Hours: 500 Capacity: 300 kW Hz: 50 Voltage: 400 V Scope of supply: Complete ORC with oil pump skid. Price: €240,000 Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.
Centrifugal pump with magnetic coupling.
Centrifugal pump with magnetic coupling.
: 150 t : 3100 mm : 2600 mm : 400 mm : 270 mm : 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data Max mechanical speed: 190 mpm (630fpm) Max. web width: 370 mm (14"4/8) Flexo Printing repeat range: from 5,5" to 24" Maximum flexo printing width: 360 mm (14"1/8) Maximum die cutting width: 360 mm (14"1/8) Web tension: max. 30 kg Drivers and motors: Emerson - Control Techniques Regulations: "CE" Mark Die cutting repeat range: from 8" to 24" (suggested form 12") Substrate thickness range: min 12 micron (0.5 mil) only PET - max. 250 gr/m² Standard machine voltage: 400 V AC three phase + 50 Hz + Earth - Automatic tension unwinder, for rolls up to 1000 mm(40") diameter,with integrated roll pick up from the floor - Servo driven infeed section,with automatic web tension control - Web guide - DUAL SERVO flexo printing stations with chilled impression cylinder for straight through short web path - Automatic pre-register 360° - Outfeed and rewinding section wi ...
JORDI PHE-30180 CNC hydraulic press brake was built in 2013 in Spain by JORDI UNIVERSAL V.S.L. The machine, designed for precision machining of sheet metal with a maximum length of 3550 mm, is an excellent choice for any industrial plant. The combination of a high press force of 175 tonnes and an extremely stable design guarantees the best bending results, even during the most intensive challenges. All this is complemented by an intelligent CNC control with all the necessary functions. The PHE-30180 CNC press brake weighs 11000 kg. Technical specifications of the JORDI PHE-30180 press brake - CNC controller: ESA 530 - maximum press force: 175 t - maximum sheet metal length: 3550 mm - maximum slider stroke length: 265 mm - distance between columns: 2600 mm - top tool weight: 55 kg - bottom tool weight: 66 kg - light curtains - foot switch control - oil tank capacity: 250 l - ...
Didar Part Number 260057620 Original Part Number 362161 – 472046 In-Pipe Water Pressure 4 – 7 bar Out of Pipe Air Pressure 2 – 6 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 230 °C Amount of Water in the Pipe 58 Lt. Amount of Air Outside the Pipe 120 Lt.
Process pump manufactured by STERLING SIHI.
Key data: 320 mm, 500 mm, 3800 1/min
OKUMA Genos L 3000-e / 2021 Circumferential diameter max. 390 mm Turning diameter 300 mm Turning length 500 mm X - Axis 235 mm Z - axis 520 mm Y - Axis 100 (+50 / -50) mm C - Axis 360 / 0.001 ° Main spindle: Bar passage 70 (80) mm Speed range 38 - 3800 rpm Spindle motor 22 KW Torque 412 Nm Sub-spindle: Bar Passage 43 (53) mm Speed range 6000 rpm Spindle motor 7.5 KW Torque 47.7 Nm Tool turret: Number of applicants WZ im Revolver 12 Speed range 45 - 6000 rpm Drive 5.5 KW Torque 31.3 Nm Machine weight approx. 5500 kg CNC OKUMA OSP P300LA-e Electr. Handwheel Software: Automatic main spindle interpolation Software: Screw Line Interpolation Software: Eccentric milling Software: Tool height correction in Y-axis Software: Synchronized tapping with applied tapping Tools Software: ADVANCED ONE-TOUCH-IGF with autom. Work plan creation OSP-P300LA-e TE ...
Vario - Snow removal blade Samasz PSV 301. Universally hydraulically adjustable blade – wedge plough or side clearer left-right use possible. Working width max./min. 303/262 cm, blade height 80/98 cm, rubber skirting strips, special equipment: training wheel set, plough lighting, electric 12 volt cable remote control for light and hydraulic control block. 1 hydraulic connection dw required. Weight approx. 480 kg. Almost new condition. Further snow removal blades, snow blowers and slingshots as well as spreading technology in stock - see also sample photos! Info and offers on request. No sending of package deals or lists. Please name and phone no. for queries. Please let us advise you in advance by phone. Appointment required for viewing!
Airport Slopes Runway Runway Winter Service - Spreaders Spreading trailer Schmidt pre-wetted salt, up to 24 m spreading width Trailer with Aebi-Schmidt "Stratos" litter body, solids and brine tanks. Contents: gritting agent 5 m³, liquids, e.g. brine: 5,200 ltr. Spreading width: 6-24 m in steps of 1 m Propulsion: Hatz 3M41 diesel engine Operation control by remote control with additional motor remote start/stop and motor monitoring. Curb weight 6,500 kg, gross vehicle weight 20,000 kg, tyres 425/65R22.5 164J, NATO towing eye 76 mm! Built in 2002. Hardly used, hardly any corrosion, accident-free. Operating manuals with spare parts lists completely available. More winter service technology in stock - see sample photos! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscap ...
Euro supports eco 350 - new Steel prop, galvanized • Effortless loosening of the adjustment nut due to special thread geometry • Less effort due to low weight, 17.60kg • Reliable to use due to consistently high load capacity of at least 20kN according to EN 1065 • Easy height adjustment through hole numbering Europrop eco 350, new construction prop made of steel, galvanized - effortless loosening of the adjusting nut due to special thread geometry - less effort required due to low weight, 17.60kg - safe to use thanks to consistently high load-bearing capacity of at least 20kNto EN 1065 - - easy height adjustment thanks to hole numbering
UNUSED STERLING SIHI GMBH CBED 065200-187 CF 3AE 4B 2 CHEMICAL PROCESS CENTRIFUGAL PUMP
Used- Alfa Laval BRPX-417-SFV-31CGL-50 Desludger Disc Centrifuge. 316 Stainless steel (product contact areas), maximum bowl speed 4180 rpm, clarifier design (liquid/solids separation), centripetal pump liquid discharge, sludge cyclone, belt drive configuration, drive motor
Process chiller / chiller air-cooled, Type: Galaxy GLT 135 SHE MTA S.p.A., The Galaxy GLT 135 SHE are compact chillers designed for outdoor installation (from -20°C to +43°C) are suitable with plate evaporator, scroll compressors, control and control cabinet, shut-off valves for compressors, equipment for low ambient temperatures down to -20°C (EC fans), P2 pump, 510 litre buffer tank, electr. Antifreeze heating, condenser filter mats incl. Vitaulic couplings. Cooling capacity (kW): 354 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 60.7 Available pump pressure bar: 2.51 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration Circuits (Quantity): 2 Compressors (quantity): 6 Power levels (%): 0-17-33-50-67-83-100 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW): 167.7 Ma ...
Process chiller / chiller air-cooled, Type: Galaxy GLT 135 SHE MTA S.p.A., The Galaxy GLT 135 SHE are compact chillers designed for outdoor installation (from -20°C to +43°C) are suitable with plate evaporator, scroll compressors, control and control cabinet, shut-off valves for compressors, equipment for low ambient temperatures down to -20°C (EC fans), P2 pump, 510 litre buffer tank, electr. Antifreeze heating, condenser filter mats incl. Vitaulic couplings. Cooling capacity (kW): 354 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 60.7 Available pump pressure bar: 2.51 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration Circuits (Quantity): 2 Compressors (quantity): 6 Power levels (%): 0-17-33-50-67-83-100 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW): 167.7 Ma ...
Vertical basket bottom discharge used centrifuge with scraper, mounted on inertia plate. Type RINA 300F-1000 manufactured by RIERA NADEU. It belongs to the 300 series for liquid-solid automatically separation processes.
sheet width: 3100 mm plate thickness: 10 mm cutting angle: 2 ° down holder: 14 Stück no. of strokes: 13 Hub/min throat: 350 mm oil volume: 260 l control: CYBELEC CybTouch 8 total power requirement: 22 kW weight of the machine ca.: 10.550 kg dimensions of the machine ca.: 4000x2250x2050 mm Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German The data for this ad was created with ModulMWS - the ...
Heavy two-sided planing machine in special design - used (overhauled in 2015), . The machine is designed for demanding suitable for machining slats and beams. SPECIFICATIONS Work dimensions: Working width: up to 220 mm Working thickness: 20 - 80 mm Working length: min. 1,500 mm Table height: 900 mm Feed speed: 20 – (120) m/min. The machine will run at Tilly max. 60m/minute Drive motors Dressing shaft: 22 kW Thickness shaft: 30 kW Feed: 7.5 kW Lifting gear motor: 1.5 kW Tool: Horizontal shaft speed: 5,000 rpm Diameter of the tools: Horizontal shafts: 200 mm Chip removal: The maximum decrease depends on the feed speed of the workpiece width, wood texture, installed drive power and the depends on the desired surface quality. For specific information, please for your inquiry. Dressing shaft: up to 10 mm with full working width approx. 2.0 mm Thickness shaft: up t ...
The shuttles were used until October 2021. Maintenance by the in-house technicians and Knapp is carried out regularly. The shuttles are neatly stored and can be called up at any time. There were originally over 70 shuttles in use. Just ask how many are still available. Containers of the sizes 60x40 cm and 40x30cm were used. It could be stored up to four times deep.
Nederman 30S Industrial Vacuum Cleaner – Used, Tested & Ready to Use - Top Condition! For sale is a powerful Nederman 30S industrial vacuum cleaner, ideal for workshops, production, construction and industrial use. Specifications: • Model: 30S • Year of construction: 2015 • Voltage: 400 V / 3 phases • Power: 3.0 KW, 400 V, 50 Hz, 2800 rpm, 3 phases, 6.8 A, Iso F, S1, IP55 • Container volume: approx. 50 litres • Negative pressure -230 mbar, overpressure 245 mbar • Weight: approx. 90 kg • Condition: used, fully functional Scope of delivery: • Nederman 30S vacuum cleaner •Hose • Original chassis Condition: The device has been tested – motor runs smoothly and powerfully. Filters and containers were cleaned. Shipping / Pickup: • Pick-up preferred (heavy equipment) • Shipping by forwarding agent possible by arrangement • Locati ...
GRANULATOR / EDGE STRIP CRUSHER The granulator is designed for grinding various plastic waste. Specifications: Motor power: 7.5 KW Capacity: 200 kg/h V-belt: 3 pcs. Speed knife shaft: 715 rpm Blower type: 7,055 kW Housing opening: 300 x 260 mm Rotating knives: 3 Fixed knives: 2 Sieve: 8 mm Weight: 800 kg Connection: 400 Volt, 50 HZ
SMAG C4R 350 June 1999 Spare parts supplied with the machine: 25 new and used air pressure connectors 5 new control buttons 1 box of 12 used relays 1 box of 12 new relays 4 new aluminum sensor holders plus 7 used ones 6 complete used Keyence for cell adjustment 2 new Keyence cell adjustment 11 bags of screws for adjustments and new cell 1 new INA mandrel holder bearing 4 new mandrel bearing holders 9 boxes of new cell wire 2 used wires 10 different new spare control buttons 7 new J559 belts 5 J864 belts 1 used inverter to be repaired 1 used brake system 1 used joystick Machine equipment: 12 slitting knives 9 slitting blade holders Winding shaft: Ø38-Ø40 -Ø76 Maximum mother reel diameter 650mm Maximum diameter of daughter coil: 350mm
Inv. Num. : 3861 Type: L-K 120-3100 TSI Producer: SAFAN Created: 2002 Parameters: Control system: SAFAN Pressing force: 1200 KN Bending length : 3100 mm stroke: 180 mm Dimensions: 4200 x 1650 x 2775 mm Machine weight: 8700 kg
Bessler - Wood Milling Machine Speed in 18mm Koskisen Grey consisting of a router table (X-axis), a portal (Y-axis), a Z-axis and a base frame filled with polymer concrete. Mechanics set: consisting of profile guides KPF-S 20 incl. carriage. Ball screw, for the Z-axis. Precision racks, with a gearing quality 8. Profile rails for the installation of limit switches. All sub-elements assembled. Machine feet adjustable. Control set: consisting of planetary gears, with a reduction ratio of 1:5 Stepper motors with 9.2NM, 4A. High-performance power amplifiers with 80V each, a 70V power supply and core transformer, completely pre-assembled in the control cabinet. Sensors for each axis. Protective device CE-compliant due to moving suction device. High-frequency spindle with 2.2KW incl. union nut, frequency converter, mains filter, brake resistor, as well as collet set. 21.5 ...
sheet width: 3050 mm plate thickness: 25 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We still have 2 pieces in stock. Price ex stock and per piece
3 phase squirrel cage motor, 90 kW 1007 r/min, 400 V D, 50 Hz, 158,000A, cos.phi 0.810, TCLB, 40 degrees C, 1000 m, price ex works
Specifications Cutting width: 3.8×48 mm Year of construction: 1993 Productivity: approx. 40 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: - the safety step: P3 Power supply: 400 V / 2.2 kW We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Core diam.: 230 mm // Material Type: Cardboard, pvc, pp , pe and hdpe cores
Originates from prominent pharmaceutical manufacturing in Europe. CE Marked. Excellent used condition. Working Description Marchesini Pack Service PS300 semi-automatic case packer for small to medium output production requirements; suitable for: Contract Packing, Pharmaceutical, Cosmetics, Nutraceutical, Medical Devices and other industries. The pre-formed cases must be placed directly on the loading area. Cartons are fed by conveyor from the machine in front of PS300 into its stacking unit, where they are collated upwards, as it is programmed through the Operator Interface Panel. The case is then automatically fed and discharged on a free running conveyor. Wide range of cases and products working sizes Case feeding area safe and free from any mechanical movement Fast and easy change over, with digital indicators and quick fixing o ...
technical details of the dressing planer: - Planing width: 310 mm - Total length of the planing tables: 1,400 mm - Diameter of the knife block: 70 mm - TERSA planing knife shaft - Number of knives: 3 - Knife dimensions: 310 x 25 x 3 mm - Rotation speed of the knife shaft: 5,500 rpm - Dimensions of the dressing stop: 1,300 x 150 mm - Swivel range of the dressing stop: 90° - 45° - Maximum cutting depth: 4 mm technical details of the thickness planer: - Dimensions of the thickness planer table: 430 x 310 mm - Capacity height of the thickness planer: 230 mm - Diameter of feed rollers: 30 mm - Maximum cutting depth: 4 mm - Feed speed: 6m/min - Handwheel with analog display for height adjustment - Diameter connection dust extraction: 100 mm - Weight: 280 kg Engine data: - Voltage: 400 V - Engine power: 3.72 kW / 5 hp Transport dimensions (W x D x H): 1,590 x 85 ...
An original control cabinet that was dismantled by PAAL Konti 275 C, built in 1994. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325,425, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Originates from prominent pharmaceutical manufacturing in Europe. Fully enclosed and guarded structure – extra safety for operators. Working Description: Marchesini Pack Service PS300 semi-automatic case packer for small to medium output production requirements; suitable for: Contract Packing, Pharmaceutical, Cosmetics, Nutraceutical, Medical Devices and other industries. The pre-formed cases must be placed directly on the loading area. Cartons are fed by conveyor from the machine in front of PS300 into its stacking unit, where they are collated upwards, as it is programmed through the Operator Interface Panel. The case is then automatically fed and discharged on a free running conveyor. - Wide range of cases and products working sizes - Cases feeding area is entirely safe, free from any mechanical movement - Torque overloading control on ...
Nordson 3100V Hot Glue Melt System (For Closing Boxes and Cases) 3100 melter hot glue melt system – for packing process and closing boxes and cases, used in Pharma, Cosmetics, Packaging, Food, Nutrition, FMCG and other industries. Consists of: Melter Control panel Hose Air-operated gun Timer / Pattern controller Driver. Suitable for thermoplastic adhesive or similar material that can be liquified and extruded at temperatures below 218 C (425 _F). Technical Info: The melter has three basic modes of operation: startup, operating, and standby. Each heated component (each hose, each gun, and the tank) is referred to as a zone. The melter liquefies the adhesive, maintains it at the setpoint (operating) temperatures, and pumps it through hoses to dispensing guns. The guns apply the adhesive to the surface of the product or package. The guns may ...
Part Number: 7806 SPECIFICATIONS - track width 300mm - Shaft width 200mm - max cutting height 100mm - max blade diameter 300mm - blade hole diameter 60mm –in advance - 2 rows of ratchets/fluffers - smooth pressure shaft, sliding - shaft with saws - smooth pressure shaft, sliding – from below -Guide -Triggers -caterpillar - 2 types of feed speed + smooth - main motor 22.37kW - central lubrication - table top dimensions l/width 1430x700mm - Diameter of the extraction port 150mm - dimensions l/w/h 2100x1450x1400mm - weight 1311kg ADVANTAGES – Italian production – very good condition – used multi-saw Net price: 29900 PLN Net price: 7119 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)
The Sulak PTS325F is a powerful vertical saw designed for cutting laminated glass and other specialty glass types. Here are the key specifications and features: Technical Specifications Maximum glass thickness : up to 60 mm Cutting types : o Normal glass o Laminated glass o Fire-resistant glass o Bulletproof glass o Cutting angle : o Straight cut (90°) o Fixed angle of 45° via simple mechanical switching o Cutting direction : Vertical from top to bottom o Cutting speed : Adjustable via frequency converter ( 0.1 – 1.6 m/min ) o Cooling system : Closed circuit with tank, water pump, nozzles and collection system Dimensions : approx. 3650 × 1900 × 4600 mm o Power supply : 3×400 V (or 3×230 V), 50/60 Hz o Power : 3.3 kW o Weight : approx. 1110 kg o Noise level : 78 dB o Saw blade diameter : 350 mm or 400 mm Maximum cutting lengt ...
grinding wheel diameter: 315 mm grinding wheel width: 40 no. of working stations: 2 Stück speeds: 1745 U/min voltage: 380 V total power requirement: 1,1 kW weight of the machine ca.: 230 kg dimensions of the machine ca.: 0,85 x 0,45 x 1,05 m S/N: 48817 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
-Intermittent flow wrapping machine in stainless steel design. -Servo drive in the cross-sealing station for ideal and reproducible bag qualities. -Separately controlled drives for high flexibility with different packaging formats. -Year of construction: 2016 -Refurbished in 2022 -Condition: as good as new Specifications: -Package length: 80-550 mm (1000 mm with double extractor) -Package width: 80-350 mm -Film roll width: 730 mm maximum -Film roll diameter: 350 mm / 40 kg maximum -Roller core diameter: 60-80 mm -Film material: all common hot or cold sealable films and composite films -Production capacity cycles/min: 60 purely mechanical
Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...
Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...
Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...
maximum number of results exceeded
please refine your search
