We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,198 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Old sewing machine make KAYSERMachine -No: 1167996for the price of: EUR 250,--Price on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hydr. Furnace pipe pulling machine make SCHNEIDERYear of construction 1994Working range: 60 - 220 mmWorking stroke: 120 mmElectricity requirement: 0.75 kWDisplacement of the tube counterholder: 750 mmPower connection: 380 V / 50 HzOutside dimensions approx: 2000 x 750 x 1570 mmWith- 14 pulling tools: 60; 70; 80; 90; 95; 100; 120xa0xa0 130; 140; 150; 170; 180; 200; 220 mm- Manual operation- Automatic mode- Two-hand releaseused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hand-held mot. Sweeper make HAKO type HAMSTER 800 VMachine -No: 6210018123 Year 1990Sweeping width: 800 mmWeight approx.: 180 kgOutside dimensions approx. 1200 x 1700 x 1200 mmWith- Travel drive- 4 stroke Kawasaki engine- side brushused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric Hand Drill Fabr SIEMENSMachine -No: 60442435, built in 1942Connected load: 220VWith- Drill chucknot functionalPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Paint shop Fabr. WAGNERYear of construction 1998consisting of:A) Paint / suction wall with filter system size 5000 x 2000 mmB) electronic 2K mixing and dosing system WAGNER TWIN CONTROLC) gun flushing deviceD) AivCoat spray gunusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Personal time attendance make Z + M type Argus J 30 PlusFabr. -No: 8383Clock: digital (time, date, day of the week)Accuracy: 15 sec./monthPushbutton: Inkjet blackBackup: 3 months in case of power failureWeight approx: 4.5 kgOutside dimensions approx: 160 x 205 x 128 mmWith- Scannerused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hydraulic test case make DUNLOP BTR hydraulicExternal dimensions approx: 325 x 280 x 80 mmWith- 4 pressure displays 25, 100, 250 and 400 bar- 4 connections- Hose connectionsusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Metal storage box Fabr. SCHÄFEROutside dimensions approx: 810 x 680/500 x 620 mmWith- Intervention recess- Color greenusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Motor with 2 flexible shafts make BIAX type MBPMash. -No: 8/1113/39Engine speed: 900/2200 /: 4600/9000 rpm.Drive power: 0.55 kWWith- 2 flexible waves- Underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
coordinate tableTable size: 625 x 315 mmTable longitudinal path: 450 mmCross table travel: 350 mmTable height: 180 mmOutside dimensions approx: 930 x 800 x 180 mmWith- Delivery spindlesNominal power for X + Y- T-slots- very accurate executionused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Torque wrench make STAHWILLE type manoscope 721 NF / 80Fabr -No: 202318024Scale range: 160 - 800 NmScale range: 120 - 600 ft. LbScale division: 20 NmScale: 20 ft. LbSocket Square: 3/4 B 46.5 mmB 76 mmTotal length: 1040 mmWith- triggering- comfortable setting- double stop signal- Double scale Nm / ft. lb- Left suit by removable square- Protection of all sensitive parts by the robust steel tube in aluminum U profilevery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Directional plate made of cast ironDimensions: 1500 x 1000 x 210/40 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
tiltable electromagnet clamping plateClamping area: 900 x 200 mmHeight: 65/105 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
X-travel: 600mm, y-travel: 475mm, z-travel: 400mm, max. table load: 600kg, connected load: 14kW, controls: UNICON-F, length: 2750mm, width: 2710mm, height: 2720mm, weight: 3.3t, with documentation, machine bed made of micro-granite, drive of the y- and z-axis via ball screw and controllable AC motors.
used
Operational voltage: 380V, nominal current: 20A.
used
Has been modified to reduce metal dust and fitted with a completely removable extraction system, operating instructions available, oil leaks, apart from that, functional.
used
Without accessories or spare parts, an inspection is possible.
used
Controls: SIEMENS SINUMERIK, length: 3000mm, width: 1700mm, height: 2000mm.
used
Directional plate made of cast ironDimensions 4000 x 1200 x 300/40 mmWithout feedusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Rated current: 20A, fused current: 25A.
used
Max. grinding length/ width: 600/ 375mm, max. working height: 465mm, max. load: 300kg, groove width: 16mm, length: 3300mm, width: 2700mm, height: 2380mm, weight: 3.5t, including accessories and documentation, was maintained regularly.
used
Motor power: 85W, weight: 1.6t.
used
X-travel: 1300mm, y-travel: 550mm, z-travel: 560mm, table width: 600mm, max. load: 1t, table height: 950mm, controls: Siemens SINUMERIK, length: 4800mm, width: 1970mm, height: 2450mm, weight: 5.4t, with documentation.
used
Grinding disk diameter: 600mm, controls: Siemens S7, with documentation, was maintained regularly, an inspection is possible.
used
T-slot platen made of cast ironTechnical specifications:Length: 1200 mmWidth: 1000 mmSolid thickness: 60 mmRibbed thickness: 150 mmWith- 6 longitudinal T-slots 26/16 mm- baseused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Weight: 1.05t, with documentation, an inspection is possible.
used
Table dimensions: 2000x500mm, magnet clamping plate dimensions: 2x 1000x400mm, weight: 7t, with documentation, rectifier system hand crank dresser, wet grinding device, paper belt filter, grinding wheel and grinding wheel holder, the machine needs to be overhauled.
used
Weight: 7.6t, with documentation and accessories, an inspection is possible.
used
Cast iron plateTechnical specifications:Length: 1200 mmWidth: 800 mmSolid plate thickness: 50 mmRibbed panel thickness: 150 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Max. grinding length: 620 mm, Sanding width: 200 mm, Max. Workpiece height: 350 mm. Spindle speed: 1,380 rpm. Magnetic clamping plate dimensions 200 mm x 600 mm, weight: 3000 kg. On-site viewing is possible.
used
Sanding range X/Y/Z: 450mm/200mm/375mm, distance table-spindle center: 525mm, hydraulic table drive: 2-28m/min. Cross feed: 3mm - 2/3 wheel width, max. cross travel: 185mm, cross travel: 1200 mm/min. Vertical adjustment speed: 185mm/min. Speed: 1400/2800 rpm, grinding wheel: 300mm/25mm/76.2, table load: 200kg. Box dimensions 2050mm/2050mm/2300mm, machine weight: 1,820 kg. Documentation available. On-site inspection is possible.
used
Sanding path X/Y: 1000mm/500mm, weight: 5000kg. Including coolant pump with tank (approx. 252l), hydraulic system and self-made suction device. Dressing axis (W-broken). Documentation available. On-site inspection is possible.
used
Length: 2600mm, width: 685mm, height: 1000mm, weight: 840kg.
used
Output: 39,600/h, additional accessories are available.
used
Output: 24,000/h, band speed: 0.5m/s, format: 0.25l GASTRO/ 0.5l GASTRO/ 0.7l GBD/ 0.75l GBD, GASTRO, with Sorting System HEUFT SPECTRUM SX TI 36, machines were overhauled in October 2021.
used
There are four HEUFT inspectors available (1) empty container inspector with rejection (2) empty container inspector (3) logo detection with rejection (4) empty bottle inspector with reject table and rejections (5) belts and belt control with the complete motors.
used
With documentation and pusher, has been regularly serviced, operating hours: 23,476h, the machine has already been dismantled.
used
Working width: 2500mm, with controls.
used
With High-Voltage Generator Tantec HV2002, connected load: 1100W.
used
grinding length:1250 mm grinding width:500 mm Clamping area:1720x400 mm weight of the machine ca.:5200 kg dimensions of grinding wheel:400x40x127 mm
used
grinding length:600 mm grinding width:300 mm total power requirement:7,5 kW number of spindle speeds:0-3000 grinding wheel motor:7,5 kW ABA magnetic table flat grinding machine
used
used
grinding length:600 mm grinding width:200 mm total power requirement:5 kW weight of the machine ca.:1,4 t dimensions of the machine ca.:3 x 3 m
used
Fanuc touchscreen control Nikken 4th axis Twin rotary diamond disc unit - this unit is mountednbsp;vertically with a slide-way adjustment to cater for the differing grind heights. The unit is designed to mount twin opposing discs to support dressing in both directions and provide support for the 6 thou diamond tip radius.nbsp; Longitudinal travel X-axis (autom.): 1420 mm Cross-travel Y-axis (autom.): 750 mm Dimensions of the table: 1200 x 600 mm Max dia grindingstone: 457 x 100 x 203,2 mm Spindlespeeds: 10 > 1680 rpm Motorpower: 22 kW Length: 6202 mm Depth: 3445 mm Height: 2855 mm Weight: 11,8 ton
used
: gebraucht : 2015 : 5413 : China : 14400 € : 11520 € : 1 : 450 mm : 600 x 254 mm : 600 mm : 508 x 254 mm : 180 kg : 2850 1/min : 2.2 kW : 2200 mm : 1800 mm : 1850 mm : 1800 kg : 200 x 20 x 312 mm : 600 mm 2-axes digital read-out grinding wheel with flange wheel balance arbour electro-magnetic chuck hydraulic longitudinal feed automatic cross feed automatic vertical feed automatic demagnetiser man. parallel wheel dressing device coolant device separate hydraulic unit aut. central lubrication dressing diamond operator tools machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Width 800 mm Glues cold PVA glue Details machine modified to topgluing machine
used
SD 410 Exhibition Machine Dressing thickness planer 410mm planing width electric height adjustment of the thickness table 4KW 400V 50HZ Star Triangle Switch Dressing table length 2000mm Thickness table length 860mm (890mm) 4 column guides in the thickness table Planing height 250mm Dressing tables can be folded up twice Dressing stop from 45° to 90° now only a short time in the price with 4 Tersa knife shaft G&RO-SD410TERSA Exhibition machine
new
working width 520 mm Total dressing table length 2250 mm chip removal 5 mm Thickness planing table dimensions 520 x 850 mm Feed speed on thickness planer 6/12 m/min Min./max. working height on the thickness planer 3.5 ÷ 240 mm Main motor power 7 kw Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h
new
L'invincibile fs 7 with tersa and aid attack Usable working width mm 520 Planing shaft diameter (number of blades) mm 120 (4) Engine power kW (hp) 9 (12) Dressing planer Total table length mm 2300 Dressing stop dimensions mm 1200x190 Adjustable dressing stop from 90° to -45° Thickness planer Workpiece storage (min./max.) mm 3/250 Feed speed m/min 5-8-12-18 - Spiral Wave Xylent - WITHOUT AID ATTACK EXPORT PRICE
used
Planer RM Group SP 520 Working width 520mm Table length 2900mm 4 knife shaft Traditional knives Power 5.5kw CE Certificate Weight 820kg Year 2008