surface used for sale

General SKUR0081 LocationBarneveld MakeV.K.I. Schiedam bv (NL) Type3V SSHE Micro Votator / Schröder Kombinator No.V0910-94353-10A19191 Year of construction1995 Main Features MaterialStainless steel Motor7.5 KW Surface0.22 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Scraped surface heat exchangerMicro Votator Number of stages:1 steam heated, 1 freon r-404a cooled, 1 water cooled/heated Heating surface0,246 (scraped surface) Heating surface shell0,229 m2 Capacity50 - 150 Kg/h Cylinder sizes(3x) dia.157mm x 500mm Max. temperature140 degr.C With jacketcheck Inletdia.30mm Outletdia.30mm Motor7,5 KW, 380/660 Volt Speed50- 500 rpm Information Mounted on framecheck With switchcheck With switchgearcheck Weight1500 KG CEcheck Floorspace1,9x1,4 M Total height2,5 M Extra SpecificationsWith Bitzer Kühlmaschinenbau GmbH Reciprocati ...

General SKU272W407 MakeTerlet Terletherm TypeT2-6M MS No.97.0908.4 Year of construction1998 LocationBarneveld Pressure Working pressure10 Bar Working pressure jacket4 Bar Main Features MaterialStainless steel Motor11 KW Surface4.4 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4401 (316) Scraped surface heat exchangercheck Heating surface4.4m² Capacity132 l. Cylinder sizesDia. 725x1350 mm Max. temperature150°C With jacketcheck Max. temperature150°C InletDN80 OutletDN80 Motor11 kW, 415 volt Speed66 rpm Information Floorspace1,3x0,9 m Total height2,5 m Weight1400 kg CEcheck Extra SpecificationsCool-/heatings medium: water, glycol or steam. Material scrapers type: PTFE Technical specs Extra informationVolume 14/18 l., allowable temperature 150°C, pressure -1/4 bar, cooling/heating medium inlet DN50, Scraped surface hea ...

General SKUR0078 LocationBarneveld MakeTMCI Chemtech TypeCR 0327 Main Features MaterialStainless steel Motor5.5 KW Surface0.1 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Heating surface0,1 M2 Cylinder sizesdia 110 x 320mm Inletdia. 20mm Outletdia. 20mm Motor5,5 kW 380-415 Volt Information No.WO 0327/01 Year of constructionunknown Floorspace1,0x0,6 M Total height1,4 M Weight260 KgScraped surface heat exchangers-Heat exchangers > Scraped surface heat exchangersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU316S539 MakeAPV Products LocationBarneveld Type884 Pressure Working pressure10.34 Bar Working pressure jacket10.34 Bar Main Features MaterialStainless steel Motor11 KW Surface2.7 m2 Specified Features - Scraped surface heat exchanger Scraped surface heat exchanger(2x) Number of stages:2 Heating surface2,7 m2 Cylinder sizesdia. ? x 2050 Max. temperature204 degr. C With jacketcheck Max. temperature204 degr. C Inletdia. 70 mm Outletdia. 70 mm Motor11 kW 380-400/660-690 Volt (2x) Speed207 rpm Information No.9150 Year of construction1995 Mounted on framecheck Floorspace3,7x1 M Total height1,5 M Weight1900 KgScraped surface heat exchangersAPV ProductsHeat exchangers > Scraped surface heat exchangersBrand > APV Products What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any d ...

General SKUR0087 MakeSchröder & Co Maschinenfabrik (D) LocationBarneveld TypeVWK 01/60-400 Main Features MaterialStainless steel Motor2.2 KW Surface0.07 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Number of stages:1 Heating surface0.07 M2 Cylinder sizesdia.60x380mm With jacketcheck Inletdia. 25mm Outletdia. 25mm Motor2,2 kW 230 Volt With variable speed drivefrequency controller Information No.110705 Year of construction1989 Mounted on wheelscheck With switchgearcheck Floorspace1,4x0,4 M Total height1,4 M Weight230 KgScraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneve ...

General SKU311P700 MakeSchröder&Co Maschinenfabrik (DE) No.23-232 Year of construction1984 Mounted on framecheck Main Features MaterialStainless steel Motor2.2 KW Specified Features - Scraped surface heat exchanger MaterialStainless steel Scraped surface heat exchangerCooler Number of stages:1 Cylinder sizes+/- dia.80mm x350mm Max. temperature-20 degr.C. Inletdia.25mm (product), dia.25mm (Glycol) Outletmissing Motor2,2 KW, 220/380 Volt With variable speed drivecheck With variable speed drivecheck Information LocationBarneveld Mounted on wheelscheck With switchgearcheck Floorspace1,4x0,7 M Total height1,3 M Weight150 KG Technical specs Extra informationcylinder size: dia. 80 mm x 350 mmScraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- ...

General SKU227Y123 LocationBarneveld MakeTerlet Type190 l. No.89-063 1 Pressure Working pressure3.5 Bar Vacuum possiblecheck Main Features MaterialStainless steel Motor7.5 KW Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) Scraped surface heat exchangercheck Capacity190 l. Cylinder sizesø 570 x 1230 mm Max. temperature100 °C With jacketcheck 34 l. & 2,6 l. InletDN50 OutletDN50 Motor7,5 kW, 380—415 V Speed± 66 rpm Information Year of construction1989 Mounted on framecheck legs Floorspace1,20 x 0,90 m Total height2,40 m Weight1000 kg Extra Specifications6-arms scraperScraped surface heat exchangersNew arrivalsTerletHeat exchangers > Scraped surface heat exchangersNew arrivalsBrand > Terlet What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compare ...

General SKU034G143 LocationBarneveld MakeAlfa Laval TypeContherm 6x3 No.HC-4844 NCC + HC-1802 NCC Material Product contact materialStainless steel Pressure Working pressure20 Bar Working pressure jacket17.2 Bar Main Features MaterialStainless steel Motor7.5 KW Surface0.279 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Scraped surface heat exchanger(1x) Heating surface0,279 m2 each With jacketcheck Motor2x 7,5 KW, 415 Volt Speed177 Rpm Information Year of construction1992 / 1982 Mounted on framecheck With switchcheck Floorspace1,3x1,0 M Total height2,0 M Technical specs Extra informationworking pressure 20 bar (300 PSI) / 31 bar (450 PSI): jacket working pressure 15,5 to 17,2 barScraped surface heat exchangersDiscountAlfa LavalHeat exchangers > Scraped surface heat exchangersDiscountBrand > Alfa Laval What you can expect from  ...

General SKU020A140 MakeAlfa Laval TypeContherm 6x4 No.HC-288 Year of constructionunknown Mounted on framecheck Main Features MaterialStainless steel Motor4 KW Surface0.4 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Scraped surface heat exchanger(1x) Heating surface0,37 M2 (4 Square Feet) Cylinder sizesdia. 152mm (6 Inch) With jacketcheck Motor4,0 KW, 380 Volt With variable speed drivecheck Information LocationBarneveld Floorspace1,2x0,9 M Total height1,8 M Technical specs Extra informationcylinder size: 152 mmScraped surface heat exchangersDiscountAlfa LavalHeat exchangers > Scraped surface heat exchangersDiscountBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in  ...

1 cavity from PP material mold sizes: 383x450x384 mm machine size min. 100 T

Dimensions (L/W/H): 3000x1200x1240 mm Weight: 850 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2700x1000x1240 mm Weight: 650 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Soest Type of Machine : Universal Surface Finishing Line – Parquet / Wood Surfaces Year of Manufacture: 2019 Condition: Very good, lightly used Complete Soest universal surface finishing line for oiling, staining, lye treatment, and patination of wood surfaces, especially parquet. Robust industrial design with Siemens frequency-controlled motors and continuously adjustable speeds in forward and reverse. Includes roller coating machine, brushing/spreading machine, and extensive accessories. Components Included: - Roller Coating Machine RCR-400-L Reverse - Brushing/Spreading Machine VP-400-1B-2P-2B - 2 replacement application rollers - Material pump (new, unused) - 4 replacement brushes - Various spreading pads - Pneumatic brush cleaning machine Technical Details: - Maximum workpiece width: approx. 410 mm - Motor control: Frequency-controlled (Siemens) - Speed contr ...

De DIAVITE DT-15 is een ruwheids- en oppervlaktemetingsinstrument uit de DIAVITE-serie, gebruikt om de oppervlaktekwaliteit van materialen te bepalen in industriële metrologie-toepassingen. Het registreert ruheidsparameters via een stylus/probe en wordt vooral tweedehands aangeboden, omdat nieuwere modellen recentere technologie bevatten.

Surface reference plates, roughness measures MASSI surface grinding TGL 4763 Rz 0.063 μm - Rz 0.16 μm in wooden box Dimensions: 240 x 125 x 40 mm

Surfaces of reference plates, roughness measures MASSI surface grinding TGL 4763 Rz 1.6 μm and Rz 6.3 μm in wooden box Dimensions: 130 x 120 x 30 mm

Surface reference plates, roughness measures MASSI surface sanding TGL 4763 Rz 0.8 μm - Rz 20 μm in wooden box Dimensions: 345 x 125 x 40 mm

Discus level sanding machine with Vertikaler-Schleifspindel and Schleifradaufnahme f?r Ceramische-Schleifsegmente. Construction year 1957 the machine is technical and geometrically in very good state. it was waited up to Au?erbetriebsetzung 2006 regelmig. hydraulic table impulse: infinitely variable adjustably vertical delivery: hydraulically Schleifrad-Durchme?er: 600 mms impulse achievement: 22 kW Magnetabme?ung: 300 x 1,000 mms Schleiftischabme?ung: 400 x 1,700 mms

Surface disinfectant ready-to-use solution (ethanol- / isoporpanol-based) in 5L canisters for surfaces - Eliminates 99.9% of bacteria, fungi, germs and special viruses (H1N1,H5N1, Grippale Infections, Influenza, COVID-19 and Diarrhea) Technical data: Container: 5L canister Pieces: 300 Origin: Germany Smell: alcoholic (without addition of fragrances and dyes) Colour: clear-transparent Density at 20 degrees: 0.90 g/cm3 Water solubility: easily soluble Ph value: 7-8 UN number: UN1993 Active ingredient content per 100g product: 55g ethanol & 16g 2-propanol Registered and approved quality product from Germany. Opinion on the efficacy of the disinfectant in Sars-CoV-2 infections: Based on the VAH publication of 12.03.2020 "Notes on the efficacy and manufacture of disinfectants from 2-propanol and ethanol based on the general decree of BAUA against the background of the ...

Straightening planer AF 3 E Product name: Planing machine Manufacturer: Julius Lindner & Co. Görlitz Type: AF 3 E Year of construction: 1966 Machine number: 3420 Condition: used, cleaned, completely refurbished and checked! Technical details: • Machine dimensions (L x W x H): 1,480 x 300 x 770 mm • Table size (L x W): 1,480 x 700 mm • Knife shaft speed: 5,400 rpm • Number of knives: 2 • Weight: 400 kg • Suction nozzle diameter: 120 mm Engine data: Voltage: 380 V Power: 1.5 kW Speed: 2,870 rpm The machine has been completely refurbished. The flat belt, the motor circuit breaker, the supply lines and the motor were renewed. Furthermore, a connection for an extraction system was retrofitted. Price: €1,250.00 (EUR) plus VAT ex Grunow (Brandenburg) (Subject to changes and errors regarding technical data and prices!)

SLAB DIM.: 1000-3000 x 740-2000 x 180-350 MM - L x W x T, 250 KW, 7 TON/H

Weibert FS 41 Planer - Thicknesser Planing width: 410 mm Drum: 4 turn blade shaft Motor power: 4KW n = 4500U/min, 400V Clearance height: 4-225 mm Westcott Chuck 0-16 mm Professional side the set stop WJ-300200 Special price: NET 2555,32,-

The machine has been overhauled in the workshop. It was repaired, defective parts were replaced and functionally tested . The spindle bearing has been renewed, the rotary table drive has been overhauled Specifications Vertical grinding spindle assembly Workpiece diameter up to 30 mm Max. workpiece height 10/20 mm Grinding wheel diameter 300 mm Grinding wheel rotation speed 35 m/s Workpiece feed 1.5 to 15 m/min Drive power grinding wheel motor 2 x 22 kW Total drive cable approx. 50 kW Machine weight approx. 4.5 t Total space requirement approx. L x W x H 3.3 x 2.6 x 2.6 m The DISKUS DDS 300 RPD has been completely dismantled, cleaned, assembled and functionally tested. Spindle bearings and rotary table drive have been overhauled. Equipped by the manufacturer for grinding with CBN discs. The machine can be viewed by arra ...

Surface grinding machine. Magnetic chuck of 550x250mm. Table travel: 700mm. Grind surface area: 600x350mm. Max. height: 375mm. Cross travel: 300mm. Wheel: 350x127x50 / 300x127x100 Weight: 2900Kg.

Altronic surface coating for architectural glass Swiss manufacturer as good as new very precise conditioning CA 300 BH Year of construction 2009 New price of the plant 334.000,-€ net lt invoice / without commissioning The robots of rice with touch Los hook are also for sale designed for the solar industry, to get very thin coatings of sulfur on solar modules Here, it was important to achieve accurate distribution, had also worked. equipped with 9 x Linearruetteler type E-PLF 0.65 IP54 Overall dimensions of the coating plant: 180 w x 220 d x 210 h Editing dimension: ca. 130 w x 160 cm possibly even a belt conveyor is available incl control and adjustment table,

JPT-260 Planer - Thicknesser Planing width: 256 mm Drum: 3 - Strip cutter Engine power: 230V/400V 2650 W Thickness forward: 3-225 mm Feed speed: 5,5 m / min. Weight 170 kg G & JET-10000289T

surface planer , thickness planer , spindle moulder . machines SCM L'Invincibile second hand machines in Excellent working conditions NOT separate sale thickness planer model SCM S 63 l'Invincibile : useful working width mm. 630 maximum (minimum) working height mm. 240 (3) maximum removal mm. 8 variable feed speed mt./min. 6 ÷ 18 motorized table positioning with reading n.4 knives "Tersa" main motor power Hp 7,5 volt. 380/50 surface planer model SCM F52 l'Invincibile working width mm. 520 tables length mm. 3000 ground cast iron tops n.4 knives tilting guide up to 45° motor power Hp 5,5 volt. 380/50 spindle moulder with tilting spindle model SCM T160 l’Invincibile spindle tilting by electric -5 ° / + 45 ° spindle lifting by electric motor power Hp 5,5 shaft diameter mm. 50 volt. 380/50

Condition: Workshop overhauled, ready for demonstration and use, tested The DISKUS DDS 457 II CL was completely dismantled, cleaned, defective parts replaced and functionally tested. Specifications Grinding spindle: 2 pieces vertical Grinding process: Continuous process Workpiece width up to 60 mm Max. workpiece height 1-60 mm Grinding wheel diameter: 457 mm Grinding wheel rotation speed 24 m/s Workpiece feed 25 to 250 mm/min Drive power grinding wheel motor 2 x 15 kW Total drive cable approx. 35 kW Machine weight approx. 3.7 t Total space requirement approx. L x W x H 1.4 x 1.0 x 2.7 m Accessories: Replacement flanges – Errors, modifications and prior sale excepted –

Weibert form7 52 digital Dressing thickness Planer Planing width 520 mm Tersa 4 drum Dressing table length 2250 mm Planing stroke 1500 mm 90 °-45 ° Machine cast iron tables 7 KW (9,5 HP) 400V 50 HZ Thicknessing table 850x520mm Passage of 3 / 240mm Electrical height adjustment of the Thicknesser table 4 speeds 5 / 8 / 12 / 18 m / min Dual opening system of the tables to the rear Max depth of cut 5 mm Speed 5000 min/1 1-suction port 120 mm Weight approx. 700 kg G & PIECES 5503511

Machine Details Stock number 1105-04042 Machine Type: Surface Grinding Machine Make JACOBSEN Type 1432 Year of construction 1992 Condition Conventional control type Storage location HAGUENAU FRANCE Country of origin Delivery time at short notice - by arrangement. Freight base delivery from site. Price Technical details Grinding length 900 mm Grinding width 410 mm Travel - x 900 mm Travel - y 410 mm Travel - z 300 mm Machine weight approx. 2700 kg Information Distance table - spindle center: 135-575 mm Table speed X: 30-30000 mm/min. Table speed Y: 4-3750 mm/min. Table speed Z: 4-4000 mm/min. Max. grinding wheel dimension: 300x50x76.2 mm Drive power grinding spindle: 4.7 kW MAGNETIC PLATE BRAILLON 800 X 400 MM 5 GRINDING FLANGES

ADH 26C. Surface thickness Planer Dressing table (Lxw): 1120 x 275 mm Thicknessing table (Lxw): 545 x 258 mm Working height 830 mm Thickness: 5-225 mm Max depth of cut 3 mm Planer shaft diameter: 70 mm Planer blade 3 Speed 1/min 5200 Feed 5.5 m / min Engine: 1.7 kW 230V Dust nozzle diameter: 100 mm Weight 170 kg G & STÃ? 5904026 optionally with 400V

Machine Details Stock-No. 1105-04056 Type of machine Surface Grinding Machine - Horizontal Make CHEVALIER Type FSG- 818 AD Year of manufacture 1998 Type of control conventional Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time immediately Freight basis ex stock Price Technical details grinding length 450 mm grinding width 200 mm workpiece height 350 mm electro magnetic clamping plate 350 x 200 mm table speed -stepless- 5 - 25 m/min dimensions of grinding wheel 200 Ø x 19 x 32Ø mm total power requirement 1.7 kW weight of the machine approx. 3.6 t Additional information automatic vertical feed, dressing devise, electro magnet, coolant with paper filter, hydraulic separate

ADH 31C. Surface thickness Planer Dressing table (Lxw): 1295 x 325 mm Thicknessing table (Lxw): 545 x 308 mm Working height 850 mm Thickness: 5-225 mm Max depth of cut 3 mm Planer shaft diameter: 70 mm Planer blade 3 Speed 1/min 5200 Feed 7 m / min Motor: 2,2 kW 230 v Dust nozzle diameter: 100 mm Weight 210 kg G & STÃ? 5904031 optionally with 400V

JOTES SPD 40 surface grinding machine was built in 1988 in Poland by PONAR-JOTES Łódź. The machine, designed for precision grinding of workpieces, is an excellent choice for professional production applications. Workpieces placed on a large magnetic plate are ground by means of a spindle with a grinding wheel, which moves transversally and vertically. This solution, combined with the ability to automatically/manually adjust the height of the grinding wheel, significantly increases the accuracy and precision of the machining process. The SPD 40 magnetic surface grinding machine weighs 4800 kg. Technical specifications of the JOTES SPD 40 grinding machine - work table dimensions (L x W): 1000 x 400 mm - work table feed rate: 2-30 m/min - minimum work table stroke: 200 mm - grinding wheel dimensions (diameter x width x bore): 350 x 63 x 127 mm - grinding wheel stroke adjustment r ...

Type MB506C Working width 600 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

Type MB505C Working width 500 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

JOTES SPD 30B surface grinding machine was built in 1978 in Poland by PONAR-JOTES Łódź. The machine, designed for precision grinding of workpieces, is an excellent choice for professional production applications. Workpieces placed on a large magnetic plate or directly on the work table are machined by means of a spindle with a grinding wheel which moves transversely and vertically. The grinding wheel, driven by an electric motor, reaches a maximum speed of 26 m/s. The work table, on the other hand, is hydraulically driven and allows stepless adjustment of the feed rate in a range of 2 to 30 m/min. Changing the table’s travel direction is done automatically using stops or manually by switching the appropriate lever. The SPD 30B magnetic surface grinding machine weighs 5000 kg. Technical specifications of the JOTES SPD 30B grinding machine - work table surface (L x W): 1000 x 3 ...

table size 600 x 250m

Granite surface table, 1270mm x 1400mm x 880mm Auction-ID: A1-45187-160

Type MB504C Working width 400 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

Steel tube arches in different degrees from 10 -45 in different lengths and wall thicknesses Price depending on length and wall

Surface grinder, tool grinder, grinding machine, -Clamping table: 650 x 200 mm -x-axis: 650 mm -y-axis: adjustable 200 mm -max intermediate dimension: 350 mm -grinding wheels: Ø 150/max. 200 mm -Dimensions: 1300/1680/H1460 mm -Weight: 1080 kg

Machine lamp, machine lamp, work area lamp, surface-mounted lamp -Manufacturer: Relux, machine lamp with 5 tubes -Power: 80 W / 5 x 13 W -Voltage: 230 V -Dimensions: 605/555 / H70 mm -Weight: 7.6 kg

<b>Features:</b> Used roller conveyor Very stable design Feet to order separately Drive type: Gravity without motor Condition: fully functional with traces of usage Ideal for fast material transport Professionally dismantled and packaged <b>Technical data:<b> </b> Dimensions of the roller conveyor</b> Total length: 54,000mm Total width approx.: 740 mm Roll width: 650mm <b>Details of the role</b> Roll diameter 50 mm Axis distance: approx. 75 mm Material: steel, galvanized <b>Information on the framework</b> Frame: Aluminum Rolls: galvanized Frame: As good as new Frame height: 120mm Frame Width: 40mm <b>Roller conveyor</b> The roller conveyor is ideal in the picking zone for interlocking machines or workstations and optimising the internal process. During transport, the ...

Working Length: 3100 or 4100

Machine details 1105-02942 Machine type Flat Grinding Machine - Horizontal Make Sit Type R4 CA Built 1981 Control type Conventional Location France Origin Germany Delivery Right away Freight base EX WORK Price On request Technical details Grinding length 450 mm Grinding width 180 mm Workpiece height 300 mm Total performance requirements 9 kW Information Grinding length max. 500 mm Table stroke maximum 600 mm Grinding width max. 180 mm Table size 600 x 300 mm Working height under grinding wheel 500 mm Grinding head Vertical path 300 mm Vertical delivery 0.001 - 0.06 mm/stroke Grinding slide adjustment across 200 mm Grinding wheel size 400 x 150 x 305 mm Grinding wheel speed stfl. 47 - 970 rpm Table load.600 kg Table lifting speed max. 30 m/min. Grinding spindle drive 12 kW Total drive approx. 20 kW - 380 V - 50 Hz Weight approx. 2,00 ...