surface used for sale

Key data: 410 mm, 200 mm, 4 kW

Used, Year of Construction 2008 Operating time according to hour meter 135 h (0.02 h/day) Offer Felder AD 741 with special accessories from part-time joinery in best condition for sale. This version is one of the last series with the particularly robust 4-spindle height adjustment, which was later converted to a central spindle for cost reasons. In order to prevent possible misunderstandings, an on-site visit is possible by appointment. Delivery is to be ordered by the buyer. Motor power 4 kW direct start with brake and limit switch Planer width 410 mm Total dressing table length 2000 mm Table length feeding dressing table 980 mm Chip removal max. 4 mm - is set and displayed on the right dressing table Swivel dressing fence with anodized ruler 4-Blade Felder System Planer Shaft Thickness planer width 404 mm with automatic E-thickness height adjustment Powerdrive (min. - ma ...

Description: Schleiflänge 1000 mm Schleifbreite 400 mm Tischaufspannfläche 1150 x 320 mm Magnetplatte 800 x 210 mm Schleifscheibengeschwindigkeit U/min. Schleifscheiben-Durchm. max. 400 mm Maschinengewicht ca. 5,8t Raumbedarf ca. 2,1 x 1,9 x 2,1 m weight approx.: 5,800 kg, Approx. Onsite Dimension. (l x w x h): 2,100 x 1,900 x 2,100 mm

SCM fs 52es SPIRAL Dressing thickness planer Planing width 520mm Spiral knife shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503502

grinding length: 650 mm, grinding width: 375 mm, grinding height: 375 mm, magnetic plate size: 600x300 mm, weight approx.: 2,900 kg, Approx. Onsite Dimension. (l x w x h): 2,800 x 1,900 x 2,400 mm

Key data: 530 mm, 3000 mm, 4 St.

SPECIFICATIONS: Working dimensions mm: 3000 x 530 Speed 5000 rpm Number of knives: 04 Installed capacity: KW 5.5

SCM Flush-Thickness Planer Model L' Invincibile 2150: - 400mm planer, table length 2150mm - thicknessing planer, manual table lifting Machine not according to CE standards, for export

Description: Fabrication number 330290 Diameter of grinding wheel approx. 200 mm Including existing documentation magnetic plate size: 600x205 mm, weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 1,300 x 1,900 mm

Description:  , serial number: 212 serial number: 212, Approx. Onsite Dimension. (l x w x h): 2,550 x 1,350 x 1,000 mm, weight approx.: 800 kg

:FSM 2550 | FSM 3060 | FSM 4080 grinding length:500 | 600 | 800 mm grinding width:250 | 300 | 400 mm Distance table/spindle center:500 (Option 600) | 500 (Option 600) | 550 (Option 650) mm table-size:250x500 | 300x600 | 400x800 mm max. table load:250 | 300 | 400 kg table speed -stepless-:5-25 m/min rapid traverse cross:900 mm/min cross feed:0,1-20 mm cross feed on handwheel:5 mm/U vertical feed on handwheel:5 mm/U autom. vertical feed:0,005 | 0,01 | 0,01 mm vertical rapid traverse:450 mm/min vertical infeed, min.:0,001 mm dimensions of grinding wheel:200x20x31,75 | 355x38x127 | 406x50x127 mm spindle speed:2900 | 1450 | 1450 1/min spindle drive:1,5 | 3,7 | 3,7 kW hydraulic motor:0,75 | 0,75 | 1,5 kW weight of the machine ca.:1350 | 1700 | 3250 kg machine length:2250 | 2650 | 3000 mm machine width:2250 | 2650 | 2000 mm

:FS-D-NC 120200 | FS-D-NC 120300 | FS-D-NC 120400 | FS-D-NC 120500 grinding length:2000 | 3000 | 4000 | 5000 mm grinding width:1200/1600 mm distance spindle nose and table:1000 (Option 1200) | 1000 (Option 1200) | 900 (Option 1100) | 900 (Option 1100) mm max. table load:5200 | 6340 | 7600 | 8700 kg table-size:1200 (1600) x 2000 | 1200 (1600) x 3000 | 1200 (1600) x 4000 | 1200 (1600) x 5000 mm table speeds:1~25 m/min table guideways:V-Führung automatic cross feed adjustable:0.1 - 40 mm/Hub rapid traverse cross:900 mm/min cross feed on handwheel:(x1) 0.1/(x5) 0.5/(x10) 1 pro Umdrehung mm cross feed on handwheel:(x1) 0.001/(x5) 0.005/(x10) 0.01 pro Grad mm rapid traverse vertical:300 mm/min autom. vertical feed:0.001 ? 0.1 mm vertical feed on handwheel:(x1) 0.1/(x5) 0.5/(x10) 1 pro Umdrehung mm vertical feed on handwheel:(x1) 0.001/(x5) 0.005/(x10) 0.01 pro Grad mm spindle speed:1100 1/min ...

:HR-400 | HR-600 | HR-800 | HR-1000 grinding diameter max.:450|650|850|1050 mm rotary table dia.:400 | 600 | 800 | 1000 mm distance horizontal spindle / table:450 | 480 | 500 | 700 mm table speed -stepless-:20-250 | 10-150 | 10-80 | 10-60 1/min spindle drive:3,7 (5,5 opt.) | 7,5 | 7,5 (11 opt.) | 15 kW spindle speed:1450 1/min vertical feed on handwheel:x1 x5 x10 (MPG)/0.1, 0.5, 1 mm/U vertical feed on handwheel:x1 x5 x10 (MPG)/0.001, 0.005, 0.01 mm/U dimensions of grinding wheel:355×38×127 | 355x38x127 | 405x50x127 | 500x50x203 mm weight of the machine ca.:2300 | 4200 | 5000 | 12500 kg Machine size (LxWxH):2400x1900x2100 | 2600x1800x2500 | 2800x2100x2500 | 5100x2950x3000 mm :mit Zyklenunterstützung CNC controls from:Siemens/Fanuc/Mitsubishi

:HR-1200 grinding diameter max.:1250 mm rotary table dia.:1200 mm distance horizontal spindle / table:700 mm table load:1200 kg table speed -stepless-:10-50 1/min spindle speed:1450 1/min feed range - vertical:1000 mm/min vertical feed on handwheel:x1 x5 x10 (MPG)/0.1, 0.5, 1 mm/U vertical feed on handwheel:x1 x5 x10 (MPG)/0.001, 0.005, 0.01 mm/U dimensions of grinding wheel:500x50x203 mm spindle drive:15 kw Siemens kw table drive:11 kW weight of the machine ca.:14000 kg Machine size (LxWxH):5300x3150x3200 mm :mit Zyklenunterstützung

:FS-C 80150/100150AHD | FS-C 80200/100200AHD | FS-C 800300/100300AHD | FS-C 800400/100400AHD grinding length:1500 | 2000 | 3000 | 4000 mm grinding width:800/1000 mm distance spindle nose and table:800 [Option: 1000] | 800 [Option: 1000] | 800 [Option: 1000] | 700 [Option: 900] mm max. table load:800x1500 (2000kg)/1000x1500 (2400kg) | 800x2000 (2650kg)/1000x2000 (3200kg) | 800x3000 (3950kg)/1000x3000 (4800kg) | 800x4000 (5000kg)/1000x4000 (5500kg) kg table-size:800/1000x1500|800/1000x2000 | 800/1000x3000 | 800/1000x4000 mm table speeds:3?25 m/min table guideways:V- und Flachführung automatic cross feed adjustable:0.5?20 mm/Hub rapid traverse cross:900 mm/min cross feed on handwheel:5 (Umdrehung) / 0.02 (Grad) mm rapid traverse vertical:240 mm/min autom. vertical feed:0.001 ~ 0,1 mm spindle speed:1450 1/min dimensions of grinding wheel:406 x 50.8 x 127 mm spindle drive:7,5 (11 Opt.) kW dr ...

grinding length:450 mm grinding width:250 mm workpiece height:280 mm Table area:760 x 250 mm grinding spindle drive:2,5 kW grinding wheel dia. x width:250x 25 mm grinding spindle speed:1430/2900 U/min way of grinding spindle saddle, vertical:400 mm total power requirement:4,5 kW weight of the machine ca.:1,8 t dimensions of the machine ca.:1,8 x 1,4 x 2,0 m Machine equiped with magnetic plate - dresser

grinding length:450 mm grinding width:250 mm workpiece height:280 mm Table area:760 x 250 mm grinding spindle drive:2,5 kW grinding wheel dia. x width:250x 25 mm grinding spindle speed:1430/2900 U/min way of grinding spindle saddle, vertical:400 mm total power requirement:4,5 kW weight of the machine ca.:1,8 t dimensions of the machine ca.:1,8 x 1,4 x 2,0 m Machine equiped with magnetic plate - dresser

grinding length:600 mm grinding width:250 mm workpiece height:380 mm :Sinumerik max. dia. of grinding wheel:300 mm weight:4000 kg total power requirement:12,5 kW grinding wheels:Ø 400 mm max. width of grinding wheel:100 mm grinding wheel hole diameter:127 mm turning speeds:470 - 12030 1/min x-axis:600 mm y-axis:300 mm z-axis:250 mm grinding range:450 x 200 mm distance spindle nose and table:500 mm table load:250 kg dimensions of the machine ca.:2600 x 2100 x 2400 mm switchgear cabinet:1300 x 800 x 2000 mm hydraulical unit::450 x 350 x 500 mm Documents:vorhanden

grinding length:1250 mm grinding width:400 mm workpiece height:550 mm workpiece weight:750 kg table-size:1720 x 400 mm magnetic clamping plate:1250 x 400 mm dist. center of grinding spindle - table:750 mm turning speed range - grinding wheel:3000 U/min Length movement of the table:1300 mm grinding wheel size:Ø 400 x 50 x 127 mm switchgear cabinet:inkl. hydraulic power unit:inkl. coolant:inkl. voltage:380 V table load:max. 1100 total power requirement:13,8 kW weight of the machine ca.:6000 kg dimensions of the machine ca.:5000 x 3400 x 2400 mm Documents:inkl.

grinding length:1000 mm grinding width:250 mm workpiece height:400 mm total power requirement:12 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:3.300 x 1.800 x 2.300 mm hydraulic power unit:400 x1000 x 1500 mm control cabinet:2 Stück, 1000 x 1400 x 1500 mm

grinding length:600 mm grinding width:300 mm workpiece height:450 mm total power requirement:8 kW weight of the machine ca.:2,2 t dimensions of the machine ca.:2,8 x 3,0 x 2,0 m grinding spindle speed:1440 / 2905 U/min with magnetic plate 600 x 200 mm autom. vertical feed coolant attachment

CONTROLS   conventional TECHNISCHE DATEN   Max. Grinding length: 1000 mm   Max. Grinding breadth: 250 mm   Table-size          : 1050 mm   Table-size          : 250 mm   Segmentkopf Durchmesser: 400 mm   Table speed: 0 m/min   .. to: 35 m/min   Grinding spindle required power: 18.5 kW Heavy duty Grinder with motorized tilting table. Grinding spindle is equipped with CBN- grinding wheel. No cooling equipment.

CONTROLS   conventional TECHNICAL SPECIFICATION   table diameter: 800 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 8500 kg Round table - diam. 800mm max. workpiece swing diameter approx. 1,200 mm Distance from table center to grinding stand 1,150 mm max. workpiece weight approx. 650 kg Table stroke horizontally approx. 650 mm Table speeds hydr.-stfl. right/left 4-100 rpm Table infeed (internal/external grinding) 0.025 - 0.025 mm/stroke Table oscillation (stroke) 0.2 - 3,000 mm/min Table holding time when changing the stroke 0-10 seconds.

Accuracy: 0.7 mm Application: Production and montagelinins, quality control Location: Rüsselsheim The measurement is based on the analysis of surface curvature. The deformation is detected by the detector built into the scanning head. During the measurement, the image of the detector is converted into a point cloud using the control software. Each of the points describes the geometry using X, Y, Z coordinates. The system then enables personalized analysis and reporting. The scanners can also be purchased individually. Visit by appointment. Disassembly, transport and commissioning by specialist company optionally possible.

1 cavity from PP material mold sizes: 383x450x384 mm machine size min. 100 T

Description: Power 1.5 kW, water cooling, wavelength 1070 nm, cleaning width 50 mm, power supply 220 V. 1. Metal surface rust removal/carbon steel rust removal/weld seam cleaning/metal surface paint removal/steel pipe paint removal/aluminum plate surface cleaning oxide film, , 2. Laser cleaning technology refers to the use of high-frequency high-energy laser pulses to irradiate the surface of the workpiece, The coating layer can instantly absorb the focused laser energy, causing the surface oil stains, rust spots or coatings to evaporate or peel off instantly. It is a high-speed and effective cleaning method for removing surface attachments or surface coatings, and the laser pulse with a short action time, Will not harm metal substrates under proper parameters. Laser cleaning is a new technology based on the interaction effect between laser and matter. Different from traditional mech ...

Description: Serial number: FBZ-8882 Operating voltage: 380 V Frequency: 50 Hz Rated current: 60 A Connection: 40 kW Control: HEIDENHAIN TNC 407 Tool holder: SK 50 Travel distances: X: 2500 mm Y: 800 mm Z: 815 mm Table clamping surface: 2900 x 800 mm Distance from floor to top edge of table: 950 mm Table surface with 5 T-sLot width/spacing: 22H12/150 mm Center groove: 22H7 SPECIAL FEATURE: max. table load without weight limit! Distance spindle nose - table surface min./max.: 0 - 817 mm Distance spindle center - table start: 235 mm Distance spindle center - table end: 935 mm Universal head position: 90° Distance spindle center - table surface: min. 200 mm, max. 1100 mm Horizontal position: 0° Distance spindle center/table surface min./max.: 0 - 900 mm Distance spindle nose/start of table: 150 mm Distance spindle nose/table end: 820 mm Horizontal position: 180° Distance spindle center/t ...

PRESS DESIGN   drive system: hydraulic   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   table cushion: yes PRESS FORCES   total force (nominal): 650 to PRESS TABLE   table surface (left-right): 3000 mm   table surface (front-back): 1800 mm SLIDE   slide force: 630 to   table surface (left-right): 3000 mm   table surface (front-back): 1800 mm   stroke: 1000 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 200 mm/s   working velocity min.: 7 mm/s   working velocity max.: 15 mm/s   return velocity max.: 120 mm/s   return force: 65 to DIE CUSHION (TABLE CUSHION)   cushion force: 250 to   stroke: 400 mm   cushion plate surface (left-right): 2500 m ...

Beer tanks / fermentation tanks and storage tanks 118.700 Liter Brand new cylindroconical Beer tanks / fermentation tanks and storage tanks designed for installation in stainless steel V2A room, WSt 1.4301 IIIc Capacity: 118.700 Liter Total content approx. 118.700 ltr. Net content of fermented about 87,700 liters. Inner diameter about 3,900 mm Outer diameter approx. 4,100 mm Cyl. Height about 8,500 mm Eaves height approx. 13,500 mm Total height approx. 14,100 mm Ground clearance: 1,280 mm Perm. Operating pressure: 1 bar Perm. Operating temperature: 40 ° C Perm. spec. Weight: 1.05 kg / dm³ Cooling jacket: Cooling zones on the cylinder approx. 4 x 16.5 m² (total approx. 66 m²) Cooling zone cone approx. 10.5 m² Perm. Operating pressure: 4 bar Perm. Operating temperature: -10/40 ° C Insulation thickness: 100 mm Material: Cr-Ni steel, WSt. ...

GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmVertical850 mmCross1050 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H12 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 800 rpm integrated balancing sensor Pallet changer for 2 palletsType of Measuring system Direct measuring systemTable surface Ø 800 x 630 mmCentre bore 50 mmMaximum load (table centre) 1400 Kg4. Axes (swivelling range) 360  ...

Power: 0.85, 1.5kW; Speed range: 300 - 4000 rpm; Speed levels: infinitely variable; Spindle mount: MK-3; Drilling stroke: approx. 105 mm; Spindle projection: 200 mm; Weight: 152 kg; Smooth-running and powerful electric motor Two speed settings clockwise/anticlockwise rotation V-belt cover with safety switch Digital speed display integrated in the housing concentricity guaranteed less than 0.015 mm measured in the drill quill Height-adjustable chuck guard with microswitch for the greatest possible protection of the user Machine light integrated in the drill head Drilling spindle with precision ball bearing High-quality quick-release drill chuck as standard Precisely machined drill table with diagonally running T-slots, 360Â rotatable with circumferential cooling water chute Thick-walled cast iron column for high force absorption and stability Solid base plate, large dimensions st ...

USED CENTRIFUGAL MOLECULAR DISTILLATION SYSTEM Manufacturer: MYERS VACUUM, Inc. Model: PILOT 15 LAB Throughput Capacity 10 - 80 lbs/hr (4.5 – 36.3 kg/hr) Type Continuous Pumping system ultimate pressure: 2 X 10-4 Torr Operating Pressure 10 -3 Torr to Atmosphere Mechanical Forepump >11 CFM High Vacuum Pump 320 L/sec of air at 250C. Power: 10-15 KW/ hour 3 phase wye” 115/208 V, 5 wire 50/60 HZ Available for 230, 415 or 460 Volt. Water: (20°C) 2 gal/min (7.6 L/min) Liquid nitrogen consumption: 0.5 liters/ hour (Utility consumptions may vary depending on process conditions) Dimensions: Height 69 Inches (1.75m), Width 34 Inches (.86m), Depth 59 Inches (1.5m) Net Weight 1300 lbs. (590kg) Centrifugal molecular distillation is a purification technique, which has gained wide acceptance in the chemical, food processing, pharmaceutical, and petroleum industries as well as t ...

The following items can be purchased in the package or subpackage: Pos. 01) -> 9 pieces of conveyor belt drums Surface: Blank Drum length: 950 mm Drum diameter: currently 224 mm or 240 mm with 8 mm rubber coating Shaft diameter: 70 mm Axle length: 1,250 mm Incl. 6 SKF pillow block bearings Pos. 02) -> 1 piece conveyor belt drums Surface: Rubberized Drum length: 950 mm Drum diameter: 260 mm including rubber coating Shaft diameter: 50 mm Axle length: 1,230 mm Pos. 03) -> 2 pieces of conveyor belt drums Surface: Blank Drum length: 950 mm Drum diameter: currently 456 mm or 480 mm with 12 mm rubber coating Shaft diameter: 60 mm Axle length: 1,250 mm Item 04) -> 7 pieces of conveyor belt drums Surface: Blank Drum length: 950 mm Drum diameter: currently 216 mm or 240 mm with 12 mm rubber coating Shaft diameter: 50 mm Axle length: 1,150 mm Pos. 05) -> 2 pieces ...

Biosan chamber The chamber was purchased in 2017, efficient, not used. The UVC/T-M-AR is a chamber designed for clean work with DNA samples. The chamber provides protection against contamination. The UVC/T-M-AR model is a table-top model, made of a metal frame and a stainless steel work surface. The chamber is equipped with an open UV lamp installed in the upper part of the chamber. UV radiation from an open lamp disinfects the working surface by deactivating DNA / RNA fragments within 15-30 minutes of exposure. A digital timer controls the exposure time. The white light lamp provides proper illumination of the work surface. The chamber is equipped with a flow UV antibacterial lamp, which ensures continuous decontamination inside the chamber during operation. This lamp is recommended for working with DNA/RNA amplicons. The UV recirculator contains a lamp, a fan and dust filter ...

sheet width:2000 mm plate thickness:1.8 mm Controls:SIEMENS S7 PRESS DESIGN:. - frame design : H-frame :. - openings in uprights : yes :. - opening in table : yes :. - moving bolster : yes :. PRESS TABLE:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - height above floor level:375 mm RAM:. - ram force:800 to - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - stroke:350 mm - number of strokes max:55 /min RAM (MECHAN. PRESS):. - ram adjustment:350 mm TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):1100 mm - distance between columns (H-frame):3100 mm - Free passage between side columns (width):2560 mm - Free passage between side columns (height):1500 mm DECOILER:. - design : single coil :. - sheet width max:2000 mm - sheet width (min):400 mm - max. weight of coil:30 to - max. diamet ...

Horizontal grinding optimum surface grinders ELB - 6375 ND - PLC Second-hand machine Surface grinders - horizontal ELB optimal 6375 ND - PLC Second-hand machine overhauled 2016 Surface grinders - horizontal ELB-SCHLIFF optimal 6375 ND - PLC Second-hand machine Grinding length: 600 mm Grinding width: 375 mm Workpiece height: 375 mm Table clamping surface: 600 x 350 mm Grinding wheel dimensions: 300 x 50 mm Grinding spindle motor: 4.7 kW Table speed: 2-30 m / min Grinding wheel speed: 1450 RPM Total power: 12kW Weight approximately: 3.5 t Space requirement approx.: 2.8 x 2.5 x 2.5 m Part overtaken 2016 + 12 months warranty, condition Control with touch screen new Paper machine Magnetic Chuck 600 x 350 Automatic table dressing with compensation 1 flange Items put up Installation / commissioning / transport

LAMINATING SYSTEM POLYTYPE BB 2200 LAMINATION LINE Coating/- lamination equipment for solvent based resin system. On an existing film or composite material. Year: 2008 Condition: Excellent The different film thicknesses what can be used depending on the materials, see references: Plastic foils 25-250 microns Metal foils (copper, aluminium) 20-150 microns Total composite thickness max. 500 microns Machine data: Production speed 0 - 150m/min Production speed 840 - 2160mm Resin 1 - 40g/m2 Winding units (main winder-/ lamination winder-/tensilized film winder): For unwind of the base film there are two winders (main winder/ lamination winder). Winder performance: - Winding direction clockwise / anticlockwise - Brakes ystem for constant and regulated tension e.g. alu foil with max. 2000 kg roll weight - Roll system centerless for steel,plastic-, carton tubes with optimal  ...

COVER OFFSET PRINTING MACHINE W+D 232 M. No.: 16035 Format (mm): 229x162 Max. Speed: 560 pcs / min. Paper weight (g / m2): 90 Counter : 53000 /h Performance data // Technical data The specified values are listed as the machine-technical performances using original W + D format parts and components. The achievable performance in practice depends on various parameters beyond our control, e.g. on the characteristics of the materials to be processed, the product and blank shape, window size and position of the windows, feed direction, position and type of the closure flap, as well as the print motif and printing ink. STANDARD The machine is used to print on both sides of pre-made envelopes and mailers with conventional offset printing inks. The printing units are arranged in satellite form around a central counterpressure cylinder. Power: Perfecting: Max. 1200 envelopes per  ...

Bihler RM 30 E punch bending machine Bihler RM 30 E punch bending machine for the production of stamped and bent parts made of strip and wire. Compact machine system for the production of precision stamped bent parts User-friendly machine and process control Bihler P CNC 400 Compatibility with RM 35, RM40 and RM4 tools Year of construction 2003 Machine housing and perforated plate Specifications Machine power: 5 - 400 strokes/min Feed length: max. 240 mm Backing edge of the strip: max. 80 mm in front of perforated plate Strip bottom edge: 4 mm above center machine Material dimensions: strip width max. 60 mm, wire Ø max. 4 m Material feeder right (176-05-00195.0) 240 mm feed length Specifications Material trailing edge: 80 mm in front of perforated plate Material bottom edge: 4 mm above center machine Material width: max. 60 mm Feed length: max. 240 mm  ...

Number of sanding units: 8 st. sanding width: 150 mm Machine can be inspected during production! Leistomat - Finisch and intermediate leveling machine Löwer LZ 8 -------------------------------------------------- ------------------- for finish sanding (smoothing, defibering and edge breaking) or intermediate sanding profiled window latch - Finish and intermediate sanding machine with eight sanding blade aggregates, 2 surface units at the top (synchronism / counter-rotation) 2 surface units below (synchronism / counter-rotation) 4 profile units with angled arrangement top right, bottom right, top left, bottom left, all mating - linear guidance of all grinding units over Linear ball bearing sets on hardened shafts - Timed immersion of all in the opposite direction rotating grinding units directly above the incoming Workpiece edges to avoid looping through the Primer in the front edge area ...

GeneralUniversal Machining Centre in monoBLOCK construction - MPC Machine Protection Control - Chip trough; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal750 mmCross650 mmVertical560 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWTorque (100% DC)86 NmTorque (40% DC)130 NmSpeed range- 20000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerTool changer planevertical Type of gripperDouble gripper Number of tools120 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.12300 KgMiscellaneousClamping SystemDIN 69872 NC swivel rotary tableTable surface Ø 650 mm5. Axes (swivelling range) +/- 120 degree4. Axes (swivel ...

4 axis deep hole drilling machine Brand: Ixion mod. TL1400 Year: 1996/1997 Mitsubishi M530 H control system Executions and Racing Sleeve TL 604 (Z) 600 mm. Sleeve TL 1004 (Z) 1000 mm. Operating unit for vertical drill (standard) (Y) 400 mm. Operating unit for vertical drill (option) (Y) 800 mm. Cross table (table surface 1375 mm. X 700 mm.) (X) 700 mm. Cross table (table surface 1675 mm. X 700 mm.) (X) 1000 mm. Mobile column in the boring direction (W) 1100 mm. Circular table (option) (B) 360 ° Work table Table surface (standard) 1375 mm. X 700 mm. Table surface (optional) 1675 mm. X 700 mm. Load on the table max 2000 kg. Bridge Tool SK 40 holder according to DIN 69871 Tightening bolts according to DIN 69872 Main spindle AC drive (3.0 kW) at 100% of the insertion ratio, S1 3.0 Kw 50% of the duty cycle, S6 5.5 kW Spindle speeds directly programmable 100- ...

Univ., Milling machine table, Angle table, Clamping angle, Clamping table T-slot table, Attachment table for Univ. Tool Barrel Machine Table No.: 2230 05 001 300 00 Table size 700 x 460 mm Height 280 mm Slot width 14 mm Slot spacing 65 mm - Table top with 7x T-slot 14 mm mounting plate with 14 mm with slotted holes for mounting and 14 mm guide groove hole spacing Mounting plate Top = 670 mm, 50 mm top of the table surface (centrally measured) - Hole distance mounting plate center = 475 mm, 112 mm top of the table surface (centrally measured)- hole distance mounting plate center = 2 pieces 15 mm, 100 mm, 112 mm top of the table surface (centrally measured)- hole distance mounting plate bottom = 475 mm, 240 mm top of the table surface (centrally measured) Dimensions L x W x H 700 x 460 x 280 mm Weight 130 kg very good condition; used

PONAR KOWARY NUA 25 tool grinding machine was built by the Polish company PONAR KOWARY (LAKFAM) in 1984. A machine characterised by a robust construction of high stability, is used in tool shops and workshops for precision grinding of tools and tooling. Grinding of workpieces is performed on a table with a surface area (L x W) of 915 x 135 mm with two handwheels for manual longitudinal movement (X axis) and transverse movement (Z axis) of the work table. The reliable grinding wheel spindle moving at 3850 and 5635 rpm guarantees rapid and precise machining. The total weight of the machine is 910 kg. The machine is offered with the extensive range of equipment shown in the attached photos, which includes: – driven divider to the instrument along the screw line – angle vice 2 pcs. – moving tailstock: 2 pcs. – 3-jaw chuck fi 160 + spanner – workpiece centre positioning tool ...

rotary table diameter: 1250 mm max. workpiece diameter: 1300 mm table load capacity - central/maximum: 1200 kg Control: Fanuc 0iF grinding height: 400 mm total power requirement: 40 kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: 5 x 3,5 x 2,4 m Transverse axis Z1 - left side. For external sanding Transverse travel 550 mm Transverse speed 0-3000 mm/min Vertical axis Y1 - left side. For external sanding Vertical travel 530 mm Vertical speed 0-2000 mm/min Motor spindle 1 - left side. For external sanding max. grinding wheel dimensions 400 x 80 mm Spindle motor power 15 kW Spindle speeds 1100-2200 rpm Spindle mount HSK 80 Transverse axis Y2 - Right side for surface and groove grinding Transverse travel 550 mm Grinding diameter 220-1300 mm Transverse speed 0-3000 mm/min Vertical axis Z2 - Right side for surface and groove grinding Vertical travel 4 ...

Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 498 mm -Length of the clamping surface: 2525 mm -Height of table surface: 268 mm -Working height: 268 mm -Transport dimensions: 2525/500/H268 mm -Weight: 570 kg

Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 494 mm -Length of the clamping surface: 2925 mm -Height of table surface: 447 mm -Working height: 447 mm -Transport dimensions: 2925/494/H447 mm -Weight: 564 kg

Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 498 mm -Length of the clamping surface: 4050 mm -Height of table surface: 268 mm -Working height: 268 mm -Price: per piece -Number: 2x available -Transport dimensions: 4050/520/H268 mm -Weight: 764 kg / 828 kg

Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 500 mm -Length of the table surface: 10930 mm -Height of table surface: 262 mm -Working height: 262 mm -Price: per piece -Number: 1x available -Transport dimensions: 11370/510/H240 mm -Weight: 2020 kg

Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 498 mm -Length of the table surface: 11370 mm -Height of table surface: 236 mm -Working height: 236 mm -Price: per piece -Number: 1x available -Transport dimensions: 11370/510/H240 mm -Weight: 2200 kg

Pendulum grinder, vertical grinder, swivel arm vertical grinder, surface grinder, grinder, l, surface grinder, magnetic grinder, surface grinder-vertical, cup grinder -Manufacturer: Slijepmachinefbriek Ijmuiden, surface grinder-vertical with magnetic plate -Magnetic plate: 320 x 155 mm -Grinding height: max. 195 mm -Grinding wheel: Ø 200 mm -Coolant device -Transport dimensions: 730/555/H1690 mm -Total weight: 443 kg

Extrusion line for blowing polymer films of type ABA, MODEL 2L800 Manufacturer RUIAN AOXIANG PACKAGING MACHINERY CO., LTD 2017 onwards Specifications 1. Film thickness: 0.01 - 0.1 mm; (Thickness: 8%) 2. Maximum film width: 800 mm 3. Recyclable materials: LDPE + CaCO3, PND + CaCO3, linear LDPE; CaCO3 content - maximum 40% 4. Maximum performance: 100 kg / h; 5. Dimensions (L x B x H): 6000 x 3700 x 6500 mm; 6. Weight: 4.5 t; 7. Main power: 70 kW; 8. Certification: CE European Compliance Certificate, SGS Independent Examination Certificate, National Compliance Certificate of China GB4455 Data sheet 1. Extruder (2 sets) 1.1 auger diameter: 55 mm 1.2 Ratio of length to diameter: 30: 1 1.3 Maximum screw rotation speed: 100 rpm. 1.4 Type of screw: mixed type, with a barrier 1.5 The material of the auger of the cylinder: 38CrMo (American certificate of protection of inventions  ...