We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,080 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
Weibert fs 52es SPIRAL Dressing thickness planer Planing width 520mm Spiral knife shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503502
new
Weibert fs 52es TERSA digital Dressing thickness planer Planing width 520mm Tersa 4 Knife Shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm Electric height adjustment of the thickness table 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503511
new
Weibert ADH 26C Dressing thickness planer Dressing table (LxW): 1120 x 275 mm Thickness table (LxW): 545 x 258 mm Working height 830 mm Thickness: 5-225 mm Max. chip removal 3 mm Max. planing width 258mm Planer shaft diameter: 70 mm Planer Knife 3 Speed 5200 1/min Feed rate 5.5 m/min Motor: 1.7 kW 400 and in 230V Suction nozzle diameter: 100 mm Weight 170 kg G&STÜ-5904026 relkm23 Optional 400V G&STÜ-5904027
new
Weibert ADH 31C Dressing thickness planer Dressing table (LxW): 1295 x 325 mm Thickness table (LxW): 545 x 308 mm Working height 850 mm Thickness: 5-225 mm Max. chip removal 3 mm Planer shaft diameter: 70 mm Max Planer Width 308mm Planer Knife 3 Speed 5200 1/min Feed rate 7 m/min Motor: 2.2 kW 230V Suction nozzle diameter: 100 mm Weight 210 kg G&STÜ-5904031 relkm Optionally with 400V G&STÜ-5904032
used
Flat tangential grinding machine Brand: GER Model: RS-50/25 ->Table Maximum rectified area: 500x250mm Distance from the table to the center of the grinding wheel: 525 Table speed: 2 to 32 m/min. Maximum table travel: 550mm Maximum weight supported piece to be rectified: 300kg ->Transversal course Maximum transversal movement: 250mm Flywheel division: 0.01mm ->Vertical grinding movement Flywheel division: 0.001mm Grinding wheel measurements: 250x25x76.2mm ->Engines Grinding wheel head: 3CV Hydraulic pump: 1.5CV Transverse advance: 0.5CV Vertical advance: 0.5CV Weight: 2200kg Tank with motor for coolant. Magnetic plate. It has an original instruction manual.
used
grinding length: 350 mm magnetic clamping plate: 300 x 150 mm grinding width: mm weight of the machine ca.: 0,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
ELB Perfect BD 10 SPS, built in 2003, grinding area 1000 x 400 x 400 mm, the machine was overhauled in 2012 and equipped with the new ELB Easy Grind control, accessories: Electric Perm magnetic clamping plate 1000 x 600 mm, Automatic straight dresser for the grinding wheel mounted on spindle box, with dressing compensation, coolant tank with paper belt filter, suction. The machine is functionally tested and can be viewed under power at our site, we are also happy to take over the installation and training on site.
used
Table dimensions: 1200x600 mm Fixing slots: 3 Longitudinal traverse (X-axis): 1350 mm Cross traverse (Y-axis): 560 mm Vertical traverse (Z-axis): 575 mm Grinding wheel dimensions: Ø 400x127x50/100 Grinding wheel power: 15 HP-1500 rpm Hydraulic pump power: 7,5 HP-1500 rpm Coolant supply power: 1/6 HP Approx machine weight: 5300 Kgs Equipped with: SELTER electromagnet: 1200x600 mm
used
Table dimensions: 700x300 mm Grinding length: 710 mm Grinding width: 305 mm Max distance from the table to the spindle centerline: 500 mm Approx machine weight: 2300 Kgs Floor ocupation: 3000x1490x1930 mm Equipped with: Control: Chevalier Electromagnet: 500x260 mm New replacement spindle
used
: gebraucht : 2019 : 5538 : prompt, Zwischenverkauf v : Taiwan : 47800 € : 1 : 630 mm : 1000 x 400 mm : 1000 mm : 1000 x 400 mm : 1050 mm : 11000 mm : 5 - 25 m/min : 0 - 2250 mm/min : 0,001 mm : 405 mm : 0,001 - 0,04 mm : 675 mm/min : 0.001 mm : 1450 1/min : 3,7 kW : 1.5 kW : 1 kW : 5,6 kW : 4280 mm : 1730 mm : 2080 mm : 3500 kg : 423 kg : 670 kg : 355 x 50 x 127 mm 8", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list Aut. vertical feed Servo drive for grinding wheel feed and table cross feed Hardened slide ways in all 3 axes with roller bearings Grinding wheel spindle on 4 high precision angular contact bearings Electro-magnetic chuck Coolant equiptment with aut. paper filter and magnetic separator Over the wheel automatic dressing device with automatic compensation Grinding wheel Grinding ...
used
Hydraulic grinding machine for flat surfaces, abrasion using pads. Total Ø 300mm, 8 pads of 70 x 20mm Adjustable table speed. Displacement 1200mm Magnetic plate with dimensions 750 x 250mm Maximum height with respect to magnetic plate 250mm Start of the grinding wheel motor using star delta, the machine is operational when the speed 2 light turns on.
used
Type: 3G 71M Parameters: 230 mm, 600 mm Manufacturer: Stankoimport Year of production / SO / GO: - / - / - Description: The machine is in good technical condition, after agreement the possibility of testing. Grinding width: 230 mm Grinding length: 600 mm Grinding height: 400 mm Weight: 3000kg
used
The machine is in good technical condition, after prior agreement the possibility of testing. Longitudinal table movement - axis x 1000 mm Transverse table movement - z axis 320 mm Vertical table movement - y axis 350 mm Grinding spindle speed 2280, 2600 rpm Max. workpiece weight 280 kg machine weight 3200 kg
used
Type: BPV 40/1500 Parameters: Manufacturer: Kovosvit Holoubkov Description: Machine in very good technical condition, after overhaul. Max. grinding length 1500 mm. Max. grinding width 400 mm Max. workpiece height 500 mm. Max. grinding wheel diameter 520 mm Machine weight 12000 kg. Magnet with a very fine pole spacing (5 mm) for high holding force and the possibility of grinding even small parts. Regulation of magnet holding force. Filtermist FX 7000 double-sided extraction. Built-in lower grinding wheel dresser.
used
The machine is in good technical condition, after agreement the possibility of testing. • Solid cast iron construction • Continuous / step automatic reversing feed • Variable table speed up to 25 m / min • Coarse and fine feed • Table parking after cycle completion. • Automatic direct dressing with grinding wheel compensation • 1/10 micron feed down and to the side with the possibility of a combination of both • Hydraulic oil cooler • All settings are controlled from the front of the machine. Magnetic table dimensions: 600x300 mm Transverse feed: 340 mm Maximum grinding height for new wheel: 322 mm Table load: 420 kg Grinding wheel dimensions: 355x38x127 mm Length x width x machine height: 2730 x 1910 x 1780 mm Weight without accessories: 2500 kg .
used
The machine is in good technical condition, after agreement the possibility to test. Table clamping area: 200x630 mm Maximum grinding length: 630 mm Grinding wheel - diameter: 250 mm Grinding spindle speed: 2660 rpm. Maximum workpiece weight with chuck: 130 kg Total power input: 5.5 kW Weight: approx. 2200 kg Machine dimensions: (LxWxH): 2710x1495x1670 mm.
used
The machine is in good technical condition, after agreement the possibility of testing. Grinding range, max. 600 mm. Table Ø / magnetic chuck Ø 600 mm. Workpiece - Swing Ø approx. 800 mm. Table speed, continuously adjustable 20 - 80 rpm. Max. grinding height above the table approx. 300 mm. Vertical movement of the grinding head 220 mm. Transverse movement of the grinding support 320 mm. Max. workpiece weight on the table 400 kg. Vertical feed, automatic 0.01 - 0.2 mm / stroke. Grinding spindle speed, continuously adjustable 1,000 - 2,400 rpm. Grinding wheel Ø, max. 400 x 120 x 76 mm Grinding spindle drive approx. 28 kW. Total electrical load 35 kW - 380 V - 50 Hz. Weight, approx. 4,500 kg.
used
Key data: 400 mm, 2600 mm
SPECIFICATIONS: Work table size mm: 2600 x 400 Installed capacity: KW 5.0 Complete with hole punch, knives and regulator
used
Key data: 500 mm, 2800 mm, 4 St.
Technical details: - Max. planing width: 500 mm - Maximum chip depth: 5 mm - Length of feed table: 1,300 mm - Length of the take-off table: 1,500 mm - Total length of the table: 2,800 mm - Table height: 800 mm - Max. workpiece length without support: approx. 1.5 m - Length of the joining fence (Aigner joining fence with integrated auxiliary fence): 1,300 mm - Height of the joining stop: 150 mm - Joining stop adjustable up to 45° and extendable over the entire width of the table - Diameter of the TERSA knife shaft: 125 mm - Nominal speed of the TERSA knife shaft: 5,000 rpm - Number of planer blades: 4 pieces - Minimum width of planer blades: 17 mm - Diameter of suction nozzle: 160 mm - Required air velocity: min. 20m/s - Required air volume: 1500 m³/h - Vacuum at 20m/s air velocity: 705 Pa - 6 x machine shoes with adjustment screws - incl. EMERGENCY STOP switch En ...
used
Good day! I would like to offer you the following machine: 1 used dresser SCM F 410 - 41 cm planing width - 2.60 m table length - 125 mm knife shaft with 4 knife Centrofix - 4 KW 380 volt motor -Main switch -Circuit breaker - Automatic engine brake - 8 mm chip removal - Joining stop can be swivelled up to 45° - Auxiliary stop - Low-noise design with serrated steel table lips - Suction nozzle 140 mm - Star triangle switch renewed (150,-- € + 19 % VAT) - 4 Leitz-Centrofix knives newly installed (80,-- € + 19 % VAT) - Weight: 750 KG - Price: €4,300,-- + 19% VAT The machine is technically checked, cleaned and adjusted. Cables and plugs available and ready to use. Very good condition. Bank transfer before shipment or cash payment on pick-up. Loading by forklift is not a problem. The machine is sold without any warranty or gu ...
used
Key data: 410 mm, 2850 mm, 4 St.
Specifications/Equipment: Planing width 410 mm Chip removal max. 8 mm Table length 2,850 mm TERSA knife shaft with 4 blades Knife shaft speed 5000 rpm SUVAmatic planer shaft protection cover electr. Feed table height adjustment Dispensing table with hollow and pointed joint adjustment Stop can be tilted up to 45° Motor power 4 kW Suction nozzle Ø 160 mm Space requirement 2,850 x 1,950 x 1,027 mm Weight approx. 870 kg All information is subject to the actual equipment
used
Description: Machine number 88/2247 , Grinding wheel diameter approx. 300 mm , magnetic plate size: 1000x500 mm, weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 4,500 x 2,400 x 2,200 mm
new
: neu : 2024 : 5549 : September 2024, Zwischenv : Taiwan : 55440 € : 1114.34 € : 1 : 610 mm : 600 x 300 mm : 610 mm : 300 x 600 mm : 650 mm : 700 mm : 5 - 25 m/min : 0 - 2,250 mm/min : 3 - 32 mm : 320 mm : 0.001 : 5,5 kW kW : 0.74 kW : 1 kW : 1 kW : 2950 mm : 1490 mm : 2080 mm : 2200 kg : 355 x 50 x 127 mm : 1.450 U/min : 0,001 - 0,04 mm : 675 mm/min : 0,001 mm 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator automatic dresser over the wheel, with compensation grinding wheel grinding wheel flange grinding wheel balancing stand (roller type) balance arbor LED machine l ...
used
Weibert WJ-FS32-W7 Dressing thickness planer 3-reversible planer knife shaft HSS Motor 3kW 400V 50Hz Passage height: 4-225mm Numerical display of the planing height Planed dressing and thicknessing tables G&2972-2036-W7
used
Description: Magnetic chucks dimensions: approx. 900 x 280 mm Max. Grinding wheel diameter: approx. 250 mm weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 2,580 x 1,500 x 2,000 mm
used
Description: Incl. machine vice Jaw width: 150 mm Panel dimensions: 800 x 800 mm weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,250 x 800 x 1,000 mm
new
: neu : 2024 : 5550 : September 2024, Zwischenv : Taiwan : 75100 € : 1509.51 € : 600 mm : 1000 x 400 mm : 1015 mm : 1000 x 400 mm : 670 kg : 1100 mm : 5 - 25 m/min : 0 - 2.250 mm/min : 0,001 mm : 450 mm : 0.001 - 32 : 440 mm : 0 - 675 mm/min : 0.001 - 0.04 mm : 500 - 2.000 1/min : 5,5 kW : 1.5 kW : 1.1 kW : 1.1 kW : 3630 mm : 2682 mm : 2200 mm : 4800 kg : 423 kg : 670 kg : 355 x 50 x 127 mm 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator oil mist collector autom. dressing attachment table mounted with compensation fully enclosed splash guard protection of working are ...
used
Automatic buffing machine for flat panels Table size 4800 x 1400 mm. The machine has got 4 rotating pads mounted on a rotor, speed rotor adjustable Buffing speed bridge adjustable
used
Automatic buffing machine for flat panels Machine has got 2 alternating operation fields, each with vacuum suction Total table size: 1,35 x 12,00 m. The machine has got 4 spinning coton buffing units mounted on a rotor, speed adjustable 5 to 25 r/min and 4 rotating finishing discs
used
: gebraucht : 2006 : 5539 : Mai 2024, Zwischenverkauf : Taiwan : 49600 € : 1 : 850 mm : 1000 x 610 mm : 1000 mm : 1000 x 600 mm : 1000 mm : 5 - 25 m/min : 1250 mm/min : 3 - 32 mm : 0.02 : 400 mm/min : 0.001 mm : 1450 1/min : 11 kW : 3.7 kW : 0.37 kW : 20,6 kW : 3700 mm : 4000 mm : 3250 mm : 7400 kg : 1500 kg : 1120 kg : 1500 kg : 355 x 75 x 127 mm : 3 - 32 mm/min Servo drive for grinding wheel feed, hardened and grounded slide ways Grinding wheel spindle on 6 high precision angular contact bearings Electro-magnetic chuck Coolant equiptment with aut. paper filter and magnetic separator Over the wheel automatic dressing device (with automatic compensation) Grinding wheel Grinding wheel flange machine lamp Machine and equipment according to the CE-regulations User manual in ENGLISH NEW GRINDING SPINDLE, SPINDLE BEARINGS AND GRINDING WHEEL The data for this ad was created with ModulMWS - ...
used
Description: Serial number: B10460 Magnet dimensions: 600 x 300 mm Grinding wheel diameter: 270 mm weight approx.: 700 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 1,200 x 2,200 mm
used
Description: Fabrication number: 803088 Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 80 A Table diameter: 1000 mm Grinding wheel diameter: 500 mm weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 2,400 x 3,200 mm
used
Key data: 520 mm, 250 mm, 5 kW
Used comb. Dressing / Thickening Manufacturer: SCM Type FS 520 Built in 1998 4-Knife Wersa Shaft Planing width 520 mm Total length of dressing tables 2,300 mm Planing height 250 mm Inclination of the joint fence 90° to -45° Power 5.5 kW With engine brake Slotted table lips Weight 980 kg With pneum. Quick changeover system dressing -> thickness -> dressing Very neat overall condition.! Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarante ...
used
Description: Serial number 62333 50 Hertz , 400 volts , 1.5 kW , SAV magnetic plate,  ,dimensions 350 x 150 mm , Software version 1.1.2 nd 780 , V max. 40m / S D max. 205 mm , W max. 25 mm , ID 31.75 mm , Travel distance Z-axis 210 mm weight approx.: 450 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 1,300 x 1,500 mm
used
Description: Motor SIEMENS 220/380 V, 0.55 kW, 2770 rpm Magnetic plate 00110-15 B 3, approx. 250 x 150 mm max. grinding wheel diameter 180 mm weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 900 x 1,600 mm
used
Digital display: 2 axes Grinding area: 600 x 250 mm Electro-permanent magnet: 600 x 200 P=4 mm Table load without magnet max.: 250 kg Distance between table and spindle centre: 500 mm Column elevation: 120 mm Overhead dresser dresser Dressing Amount Compensation Automatic Grinding spindle motor: 2.3 - 9.3 kW Grinding spindle speed: 1,000 - 4,000 U-1 Grinding spindle speed control Grinding wheel dimensions A-Ø max x width max x bore: 250x25x50.8 mm Table Clamp Preparation of extraction without suction device Belt filter basins Flanges Grinding wheel Documentation Actuators Voltage: 400 V / 50 Hz Total connection: 10 kVA Machine weight approx.: 2.000 kg Approx. space: 2,600x1,800x2,300 mm
new
Weibert SD 510 Dressing thickness planer including 4-tersa knife shaft Planer width 510mm Dressing table length 2250mm Planer fence 1500 mm 90°-45° Machine Grey Cast Iron Tables 5.5 KW (7.5 HP) 400V Thicknessing table 1050 x 510mm Passage of 250mm Numerical display thickness table Electric height adjustment of the thickness table 2 infeed speeds 6 & 12 m/min Dual folding system of the tables to the rear Weight of 900 kg G&RO-SD510NE-TER
new
Weibert SD 510 Dressing thickness planer including spiral knife shaft Planer width 510mm Dressing table length 2250mm Planer fence 1500 mm 90°-45° Machine Grey Cast Iron Tables 5.5 KW (7.5 HP) 400V Thicknessing table 1050 x 510mm Passage of 250mm Numerical display thickness table Electric height adjustment of the thickness table 2 infeed speeds 6 & 12 m/min Dual folding system of the tables to the rear Weight of 900 kg G&RO-SD510NE-SPIRAL
new
Weibert FS 32 Dressing thickness planer Planing width 320 mm 3-reversible planer knife shaft HSS Motor 3kW 400V 50Hz Passage height: 4-225mm Numerical display of the planing height Planed dressing and thicknessing tables WJ-300100
used
Description: . weight approx.: 350 kg, Approx. Onsite Dimension. (l x w x h): 1,300 x 1,000 x 2,000 mm
used
Description: Magnetic plate dimensions: 450 x 250 weight approx.: 800 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 1,600 x 2,000 mm
used
Description: Magnetic plate dimensions: 700 x 300 weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 2,900 x 2,000 x 2,200 mm
used
magnetic plate size: 1000x500 mm, grinding wheel width x diameter: 400 mm, grinding wheel turning speeds: 1000 bis 2000 rpm, weight approx.: 6,500 kg, Approx. Onsite Dimension. (l x w x h): 4,400 x 2,300 x 2,500 mm
used
Description: Planer shaft motor Kw (Hp) 4 (5.5) Planer shaft with 4 knives Ø 110 mm Planer shaft rotation speed 5000 rpm Dust extraction port Ø 120 mm Flush worktable dimensions 2130×515 mm Thicknessing table size 960×515 mm Working height 4 - 225 mm 2 feed speeds 9 - 14 m/min Approx. Onsite Dimension. (l x w x h): 215 x 1,100 x 1,250 mm, weight approx.: 820 kg
used
Description: Planer shaft motor Kw (Hp) 4 (5.5) Planer shaft with 4 knives Ø 110 mm Planer shaft rotation speed 5000 rpm Dust extraction port Ø 120 mm Flush worktable dimensions 2040×410 mm Thicknessing table size 960×410 mm Working height 4 - 225 mm 2 feed speeds 8 - 14 m/min Approx. Onsite Dimension. (l x w x h): 2,100 x 1,000 x 1,250 mm, weight approx.: 690 kg
used
Price example : FS310PS - New , carbide planer shaft dia. 75mm, thickness planer height: 5 - 240mm: 1900,- net
used
Inv. Num. : 7462 Type: G130 Producer: Göckel Created: 1987 Parameters: Control system: Sinumerik 810 Table length: 7500 mm Table width: 1000 mm Machine height: 3500 mm Machine length: 15000 mm Machine width: 3500 mm Machine weight: 45000 kg Equipment: 500 ceramic and 500 bakelite grinding segments 2016: Conversion of the control system to Sinumerik 810
used
Inv. Num. : 7463 Type: G80 Producer: Göckel Created: 1987 Parameters: Table length: 3100 mm Table width: 400 mm Machine height: 2000 mm Machine length: 8000 mm Machine width: 3000 mm Machine weight: 14000 kg
used
Inv. Num. : 7464 Type: G100 Producer: Göckel Created: 1987 Parameters: Table length: 2500 mm Table width: 600 mm Machine height: 2300 mm Machine length: 7000 mm Machine width: 3000 mm Machine weight: 14000 kg
used
ELB Perfect BD 10 750, grinding area 1000 x 750 mm, year of construction 2004, grinding spindle 10 KW, grinding wheel 400 x 100 mm, automatic dresser with compensation, electric perm magnetic clamping plate 1000 x 750 mm, partial enclosure with suction, water tank with paper belt filter, the machine is partially overhauled, geometry according to the standard of new machine, we are happy to take over the installation / training on site, as well as the subsequent service.