surface grinding used for sale

Dimensions (L/W/H): 1800x740x1000 mm Weight: 420 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1480x580x1120 mm Weight: 280 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1800x740x1000 mm Weight: 420 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x745x1100 mm Weight: 580 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2300x1150x980 mm Weight: 900 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1480x580x1120 mm Weight: 280 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Wagner Type of machine : Powder Coating System Year of Manufacture: 2000 The powder system consists of the following individual components: - 1x Powder coating booth – FBC – plastic booth with discharge conveyor - Cabin extraction system – 1x monocyclone 1x closed post-filter - 2x powder collection containers - 1x Powder Center - PZ - 2008 with its own extraction system - 8x Automatic Powder Guns – PEA – T2 - 2x hand powder guns – PEM – T2 - Control unit for automatic pistols – 8x PM 401 pneumatic module 1x PG 650 control module - 2x Control for handguns – EPG – 2007 in Tribo mode - 2x lifting devices – EBA – 3 - 2x electric sliding unit – VT – 1400 - Light strips – height + gap + depth - 1x external safety device – fire detection (Minimax company) - Find more here - .ucymachines/ Contact us at - sales@ucymachines

AD planing machine Hammer A3-41, year 2001, less good condition, incl. driving device, impeller is worn, 4 kW S6, 1700 mm table length, 410 mm table width, 3 knives, 360 kgPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine STÖ310V, very good condition, 2.2 kW, 1800 mm table length, 310 mm table width, 4 knives, 300 kgPrices subject to change, errors, printing and typesetting errors excepted

The new planer & thicknesser by Holzprofi Maker is convincing with it´s solid construction and high user-friendliness. Steel cutterblock, cast-iron table, mechanical digital pivoted aluminium stop, switchable feeder, noice reduced, motor protection, motor brake, no-voltage release, CE-conform technical data: Specifications: Motor power S6 3,8 kW (3 kW-S1) Dimensions of knives 15 x 15 x 2,5 mm Cutter block diameter 75 mm Planing width 300 mm Length planing table 1400 mm Admission height 240 mm Feed speed 6 m/min Suction diameter 100 mm Thicknessing table size 310 x 600 mm Max. chip removal (depending on board width and type of wood) 3-5 mm Voltage 400 V Weight appr. 208 kg Optional accessories: moving device

AD planing machine Hammer A3-41, year 2005, 1800 mm table length, 3 knives, 400 kgPrices subject to change, errors, printing and typesetting errors excepted

AD planer Minimax 310, good condition, 2.2 kW, 200 kgPrices subject to change, errors, printing and typesetting errors excepted

With strip blade, slightly usedSurface planer:Table dimensions 1800 x 410 mm, Max. chip removal 5 mm, Planer shaft diameter 100 mm, Number of planer blades 4 pieces,Thickness planer:Table dimensions 700 x 406 mm, Max. chip removal 4 mm, Feed speed 8m/min, Motor output power 5 kW S6 400V (4kW S1), Weight, 450 kg

AD planing machine Scheppach HMC3200, built in 1993, good condition, 2.9 kW, 320 mn table width, 1380 mm table length, 150 kgPrices subject to change, errors, printing and typesetting errors excepted

Demonstration machineYear of construction 2022The new FSN dressing thickness planer is characterized by its stable design, the strong machine casting tables with a ground surface and modern handling. The machine is space-saving and extremely convenient when changing from dressing to thickness. The solid guide of the thickness table ensures the best planing quality.A mechanical digital display ensures perfect reading of the thickness height.CE compliant, 100% Made in EU (developed, built, quality tested)

Exhibition machineThe DMA41L surface planer is characterized by its sturdy construction, strong machine casting tables with ground surface and modern handling. The dressing fence is 45 swivel. CE compliant, made in EU! Technical data:Table dimensions 2600 x 410 mmMax. Chip removal 8 mmPlaning shaft diameter 125 mmPlaning shaft speed 4700 rpmNumber of planing blades 4 piecesPlaner knife dimensions 410 x 35 x 3 mmMotor output power 5.5 kW -S6 (4kW S1)

Exhibition MachineProfessional Wood Professional Commercial and Industrial Surface Planing Machine for Professional Use. The machine is characterized by its stable construction and good operability. CE-compliantTechnical data:Dressing table length 2750 mmDressing table width 550 mmPlaning width 530 mmPlaner blade 4 pcs 550 x 35 x 3 mmKnife shaft 120 mmChip removal max. 7 mmLength stop ruler 1300 mmMotor output power S1 4 kW, 400 VAnflung swivel 0-45Suction connection 150 mmWeight 570 kg

Rojek 410 AD planer, good condition, built in 1997, standard equipment, 3.4 kW S1, 400 kgPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Hammer A3-41, very good condition, year 2023, 4 kW motor power, 1800 mm table length, 410 mm table width, incl. spiral planer shaft, 230 mm thickness planerPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Hammer A3-41, built in 2019, very good condition, incl. reversible blade and chassis, 4 kW, 1800 mm table length, 410 mm table width, 3 knives, 350 kgPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Felder AD741, very good condition, year 2003, 4 kW S6, 400 V, 410 mm table length, 2000 mm table width, 4 knives, approx. 400 kgPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Hammer A3-31, good conditionPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Holzprofi FS41N all incl. very good condition, incl. reversible blade, 2 speeds and feed 6/12 m, 4 kW, 1850 mm table length, 410 mm table width, 4 knives, approx. 470 kgPrices subject to change, errors, printing and typesetting errors excepted

Technical data:Total table length 2350 mm, thickness table length 1000 mm, stop ruler 1500x180 mm, knife shaft diameter 120 mm, number of knives 4, knife length 550 mm, dressing stop swivel 90 - 45, feed speed 6/12 m/min, max. chip removal 6 mm, motor output power 5.5 kW (7 kW S6), weight 920 kg, with automatic star delta switching.Options: - Motor output power 7.5kW (9.5 kW S6)- electric table lift; - 2 under-table roller - Digial height display of the thickness table - Knife adjustment gauge

AD planing machine Hammer A3-31, year 2018, very good condition, very little used, 310mm planing width, incl. 1 set of replacement knives (reversible knife), 3 kW, 3 knives, 300 kgPrices subject to change, errors, printing and typesetting errors excepted

SCM F5L Surface planing machine Planing width 510mm 4 knife shaft YOC 1995 Functionality: fully functional G&-5214-M3L42

Save energy and water, Efficient surface drying, Compact, powerful drying system, particularly energy efficient, Optional: with tunnel system, Areas of application:, • Water carryover, • Bottle neck drying, • Blowing off crown caps / flip-top bottles, • Can level blow-off, • Coding area drying, • Blow off dust, • Blowing off residual water for camera-supported control, Compact design in different versions:, • Band attachment (approx. 500 x 500 mm), • Rack mount, • Wall mount, Technical specifications:, • Max. power consumption 1,300 watts, • 230V connection, • Infinitely variable, • Ambient temperature 0-50°, • Storage temperature –40 to +85°, • 220 m3/hour or 3,666l/minute, • Overheating/overvoltage protection, Suitable e.g. for:, • Bottles, • Cans, • Beverage carton packaging, • Glasses, • Bowls, mugs, • Vacuum packaging

Manufacturer: Samco Model: FlexLiner II Year of Manufacture: 2018 Type of Machine : UCP plasma machine The samco-ucp FlexLiner II is a production type plasma cleaning system designed for surface cleaning of various types of leadframe packages. This system operates with a remote plasma source in the downstream process mode. The plasma is generated by RF power in the source and then injected into the process chamber through a shower head. Dimensions: 1,520 mm (W) x 1,410 mm (D) x 2,130 mm (H) Key Features and Benefits - Single substrate production equipment for various types and dimensions of substrates and magazines up to 300 mm x 300 mm - Gentle handling with minimal movement of substrates and magazines - Touchscreen GUI for user-friendly, intuitive operation - Multiple sensor controls for highly reliable operation - High throughput due to simultaneous (un)loading and plasma proces ...

Safety switch, Safety Switch, Magnetic door contact safety switch, Surface magnet, Electromagnetic locking system, Electric door opener -Manufacturer: BSW, surface magnet door contact safety switch Ovp -Type: EF150UPCTC -Operating voltage: 12/24 V -Number: 2x electric door openers available -Price per piece -Dimensions box: 280/95/H40 mm -Weight: 1,3 kg/piece

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, conveyor belt with vacuum connection -Belt conveyor: Vacuum surface for suctioning the material to be conveyed -Belt width: 150 mm -Conveyor length: 770 mm -Drive shaft: Ø 30 x 150 mm Dimensions: see photos / technical drawing -Dimensions: 875/400/H300 mm -Weight: 60 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, conveyor belt with vacuum connection -Belt conveyor: Vacuum surface for suctioning the material to be conveyed -Feed belts: 3 pieces, length 1840 x 30 mm -Drive shaft: Ø 30 x 100 mm -Individual components: see photos -Dimensions: 1840/570/H285 mm -Weight: 129 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, conveyor belt with vacuum connection -Belt conveyor: Vacuum surface for suctioning the material to be conveyed -Belt width: 100 mm -Conveyor length: 650 mm -Drive shaft: Ø 30 x 100 mm -Key width: 8 mm -Dimensions: 650/520/H250 mm -Weight: 51 kg

Manufacturer: Heiche Sachsen GmbH & Co. KG, Leisnig, Germany Model: HEIS05 Year of manufacture: 2003 Major refurbishment: 2013 to 2018 Status: Fully operational Control system: Siemens S7-300 Operating software: Ditec Operating modes: Manual, jog, and fully automatic Technical Specifications - Max. workpiece window: 2,200 x 700 x 350 mm - Max. workpiece carrier weight: 750 kg - Coating material: Aluminium - Noise level: below 85 dB(A) - Overall dimensions (L x W x H): 15,000 x 3,000 x 4,000 mm - Number of baths: 24 - Number of dryers: 2 - Number of loading/unloading stations: 2 - Transport system: 2 carriages Electrical and Utilities Data - Supply voltage: 3-phase 230/400 V / 50 Hz - Control voltage: 24 V DC - Total installed power: 190 kW - Total fuse protection: 224 A - Pneumatic pressure: 7.5 bar - City water consumption: 150 l/h - Demineralised water consumption: 150 l/h a ...

Qty. 1 Second-hand Slab Surface Scalper Mfc.: TBA Built: 1972 Scalped Slab Dimensions: 1000-3000 x 740-2000 x 180-350 mm – L x W x T Main Drive Electric Motor Power: 250 kW, 380 V, 735 RPM Scalping depth at once: 4-5 mm Capacity: Average 7 tons/h (For 1040 mm width slab)

Key data: 410 mm

SURFACE PLANER model SCM MINIMAX F1 second hand machine in Excellent working conditions CE regulation: YES instruction booklet and CE certification: YES security protection working width mm. 410 tables length mm. 2610 n.4 knives "Tersa" tilting guide up to 45° motor power Hp 5,5 volt. 380/50

Blanchard dia 900 mm Magnetic table dimensions: die 900 mm Motorpower: 25 HP Length : 3300 mm Depth: 1180 mm Height: 3100 mm Weight: 6 ton

Manufacturer: Sidasa Type of Machine : ZT100+ Centrifuge System Year of Manufacture: 2017 Application: Zinc Flake Coating for Bulk Small Parts Includes: Associated Dryer CE Certified Technical Specifications - Maximum Coating Capacity: 7.5 tons per hour Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Heiche Model:HEIS01 KTL system Year of manufacture: 1982 Major overhaul: 2008 to 2013 Status: Fully operational Control system: Siemens S7-300 Operating software: Ditec Operating modes: Manual, jog, and fully automatic Technical Specifications - Max. workpiece window: 1,240 x 800 x 600 mm - Max. workpiece carrier weight: 160 kg - Coating material: KTL paint (cathodic electrodeposition) - Coating thickness: 10 to 45 micrometers - Cycle time / throughput: 190 seconds per cycle (18 workpiece carriers per hour) - Noise level: below 85 dB(A) - Overall dimensions (L x W x H): 9,000 x 12,000 x 7,000 mm - Number of baths: 15 - Number of loading and unloading stations: 6 - Conveyor system: Chain conveyor by KEWESTA - Dip system: Lifting station by Klaus Sessler - Drying: Curing oven by Rippert Electrical and Utilities Data - Supply voltage: 3-phase 230/400 V / 50 Hz - Con ...

Part number 7987 SPECIFICATIONS - shaft width 500mm - number of knives 4pcs - max thickness of the workpiece 230mm – in advance: - latches - toothed, pulling, torsional introductory shaft - pressure - planing shaft - pressure - smooth pulling shaft - 4kW motor - electric lifting of the table top - 2 types of feed speed 8/12.5m/min - dimensions l/w/h 1000x1000x1050mm - weight 620kg ADVANTAGES – Italian production – thickness sheet used, very good condition Net price: 14900 PLN Net price: 3548 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

serial number: 208892 control: Siemens 611 weight: 6,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sturm Coating System Description: For sale is a used coating plant from the manufacturer Sturm, formerly used at the Mercedes-Benz plant in Hamburg for the machining of rear axle beams. Technical data & scope of delivery: Manufacturer: Sturm (plant) / KUKA & Yaskawa (robot) Year of construction main plant: 2019 Former operation: 3-shift (age-appropriate condition) Plant components: Aggregates, dryer and cooling zone, paint booth, loading and unloading station Included robots / peripherals: Several replacement KUKA robots (models KR 210L 150-2 / KR 210 2, model years 2006–2012) Related Robot Control Cabinets 2x Yaskawa Robot EPX 2900 1x Thermal aftertreatment / exhaust air purification system (VeniaKab / RNV) Condition notes: Control technology: According to plant maintenance, it is state-of-the-art Electrics & mechanics: Mostly in an age-appropriate or good con ...

Used SCM S520 NOVA thickness planer useful working width mm. 520 Standard 4-knife shaft working height min/max mm. 3,5/300 max removal mm. 8 Double rubberized drive roller at the exit nr. 1 toothed drive roller at the inlet Electric Deck Lift 4-speed feed Star/delta starter Shaft rotation speed 4500 rpm Weight kg. 687 CE compliant

Code: 0447 Brand: TB Model: 29 Jack planer for planing and trimming wooden edges Technical data: Rpm 14000 Power 1000 watts, single-phase 220 V Knives 60 mm Large work surface for comfortable and safe working Overall dimensions cm 25 x 35 x 15 h Weight kg 4

EMCI, Explo 750T, Weight: 3800 kg, Dimensions: 450 x 150 x 235 cm, Drive: 75 HP diesel engine, Drill motor:, -Rotation speed 260 RPM, -Power: 3200 Nm, Pull-up/pull-down: 2500 kg-2500 kg, Comes with 32 x 3-meter drill pipes (96 meters), 1 x 250 mm drill bit, 1 x 300 mm drill bit, 1 x 200 mm drill bit, 1 x 150 mm drill bit, 1 x 400 mm auger drill bit., , = More information =, , Type of fuel: Diesel, Year of manufacture: Jun 2008, Model year: 2008, Power: 55 kW (75 HP), GVW: 3.800 kg, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, dri ...

Open-face drilling machine from Schmidt Kranz & Co GmbH, Reliable German quality, This open-face drilling machine is designed for drilling with the Open-Front Technique, also known as auger drilling. This is a trenchless drilling technique. Trenchless drilling minimizes the impact on the environment and allows work to be carried out under existing structures without excavation., This machine can be used for a wide range of underground infrastructure applications where trenchless construction is required., • Brand: Schmidt, • Type: Open-face drilling machine, • Condition: Very well maintained, • Ready for immediate use, , Accessories, 57 pcs. Casing pipe with internal diameter Ø 350 mm, length 1000 mm, 29 pcs. Auger plus head: 1 MTR Ø 320 mm, 7 pcs. Auger: 1 MTR Ø 350 mm + clamp, 50 pcs. Casing pipe with internal diameter Ø 260 mm, length 1000 mm, 6 pcs. Auger: Ø 240 mm, 37 p ...

Fraste MD/XL , , ENGINE:, type: JOHN DEERE 4045TF275 DIESEL, number of cylinders: 4, displacement: 4.5 L, power: 86 kW, , ROTARY HEAD - , type: R12D100, number of hydraulic motors: 2, number of rotary heads: 2, Torque, speed (motors connected in series):-: 410 kgm(1) - 100 rpm/1’(1), Torque, speed (motors connected in parallel): 820 kgm(2) - 50 rpm/1’(2), , LIFTING SYSTEM, Lifting capacity (up): 5000 kg, Lifting capacity (down): 3500 kg, Stroke: 3500 mm, , CLAMP:, Type: double , Clamp diameter: Ø60÷280 mm, Max. diameter: 280 mm, , HYDRAULIC PULL CYLINDER, Number of cylinders: 2, Pulling capacity (up): 20,000 kg, , WINCH:, 2,000 kg (40 m/1), , Pump (suction pump), BBA - NB140 (350 m³/h, 25 MWC, 105 mm ball passage), , Included with the machine:, 20 drill pipes, length 3 m (60 meters total), , = More information =, , Type of fuel: Diesel, Year of manufacture: 2006, Model year: 2006, ...

Condition: Used, , Manufacturing year: 2012, , Serial nr: 13-10-932, , Engine: Yanmar 3 TNE74-YC, , Hour meter reading: 795, , , , Source Regeneration machine, , , , Tooljoint outer diameter 135 mm, , Inner diameter 100 mm, , Outer diameter 114 mm, , Undercarriage Hinowa”, , Scanreco control system, , , , , , By installing/connecting a submersible pump, pumping is possible at the desired depth; the digital water meter records the flow rate; the hydraulic reel is operable and adjustable., , = More information =, , Type of fuel: Diesel, Year of manufacture: 2012, Model year: 2012, Technical condition: good, Visual appearance: good, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just l ...

Conrad Boxer 200 drilling rig , Pull-up 4000 daN / kg, Pull-down 2000 daN / kg, Winch//Witch 1450 daN / kg, Year of manufacture 2007, Weight 12,500 kg, Stroke 430 cm, This Conrad Boxer is equipped with:, Caterpillar track , - Caterpillar length center to center : 2600 mm., - Caterpillar width : 400 mm., Brevini EGO200LS winch with 50 meters / Ø10 mm., Soundings winch 200 meters stainless steel wire, Ø 2mm., , Hydraulically driven 4 drill head , , - Max. Drive torque 380 - 400 daNm, - Breakaway torque 475 - 500 daNm, - Max. Speed 80 rpm, , Hydraulically operated changeover clock, suitable for 3 1/2 drill pipes., Spool head suspension with weight compensation, Hydraulically operated catch clamp, Hydraulic tank 480 liters, Hydraulically driven spray pump, Drill pipe manipulator, Drill pipe storage rack incl. 74 pcs. 3-meter 3-1/2-inch drill pipes (222 mete ...

Description - TERSA planer blade system enables particularly quiet operation. - Helical toothed steel feed roller for constant and uniform material intake - Two-speed material feed - Numerical display for thickness table height - The 2,000 mm long dressing tables enable easy dressing of large workpieces. - Work tables are made of grey cast iron, post-annealed and stress-free, making them insensitive and permanently flat - Sturdy large aluminium dressing stop with round bar guide (1200 x 160 mm) - Thickness table adjustment via handwheel with numerical display for the planing height - The high machine weight ensures maximum precision and smooth running - Powerful industrial motor - Robust steel/cast iron construction Technical data Dimensions and weights Length (product) approx. 2000mm Width/depth (product) approx. 1110mm Height (product) approx. 1115mm Weight (net) app ...

Description - With TERSA knife shaft for razor blade changes in seconds - TERSA planer blade system enables particularly quiet running - Helical toothed steel feed roller for constant and even wood feed - The particularly long dressing tables made of one piece enable easy dressing of the workpieces - Large dressing stop can stay in place when opening the dressing tables - Rear-opening dressing tables - The high machine weight ensures maximum precision and smooth running - Powerful industrial motor - Robust steel/cast iron constructionWork tables made of grey cast iron, after-annealed and stress-free, therefore insensitive and permanently flat - Table lips for quiet running Technical data Dimensions and weights Length (product) approx. 1725mm Width/depth (product) approx. 880mm Weight (net) approx. 270kg Dressing Total length of tables 1500mm Working height900mm Chip ...