surface grinding used for sale

Grinding line for frozen synthesis , Karl Schnell Packed , stored in Europe, ready to ship and install Featured for US CAPACITY Capacity up to 15 000 kg/h for the fresh process Capacity up to 8 000 kg/h for the frozen process Design for three shifts-operations 6 working days/week with 16 working hours/day RAW MATERIEL All raw materials temperature between -18°C and +15°C: - Pork and chicken liver - Pork pulmon - Atum viscera - MDM Max 19 000 cp @ 0°C Content : Pos.015 KS Lifting device DM-1500 type 632 Maximum load capacity: 1500Kg Designed for frozen raw material pallets Fitted with a safety fence Safety fence secured by 2 safety light curtains Pos.020 KS Breaker PB1 type 492 Single shaft breaker for frozen raw materials pallets Maximum height for frozen pallet: 1450mm Pos.085 KS Lifting device DM-800 type 632 Maximum load capacity: 800Kg Designed for Jumbo/ ...

Manufacturer: Loewe Type of Machine : Grinding Machine Condition: Used Find more here - / Contact us at -

Manufacturer: Timesavers Grindingmaster Type of Machine: Grinding Machine Model: 81 series Condition: used Machine Hours: 2963,9 h Find more here - / Contact us at -

LVD TMSB 800 mm 3 grinding belts Type: precision grinding Max sandingwidth: 800 mm Min. size of parts: 130 x 130 mm Part thickness: 0,5 -- 110 mm Number of individual abrasifbands: 3 Main motor(s) power : 3 x 5,5 kW Nominal output: 19 kW Length L -- R: 1600 mm Depth Fw -- Bw: 2700 mm Height: 2000 mm Weight: 3000 kg Conveyor motor power: 1 kW Dust collector capacity needed: 11 500 m³/h

Manufacturer: Grindingmaster Model : GR-3200-1359 Year of Manufacture: 2001 General overhaul : 2017 Voltage (V): 400V Frequency (Hz): 50Hz Current (A): 209A Power (kW): 104kW includes a centrifuge Find more here - / Contact us at -

A Grindingmaster wide belt sanding and brush deburring machine is available. Working width: 900mm, max. workpiece thickness: 150mm, belt speed: 20m/min, conveyor speed: 20m/min, table height adjustment: +/-75mm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2000mm, weight: approx. 2000kg. The sanding brushes are defective. On-site inspection is possible.

GRANULATION AND SEPARATION PLANT, Capacity up to 600 kg/h (see below list), separation surface 750 x 375 mm, Vibratig ytable with a 0.750 kW drive, Blower - 0.750 kW drive, Total drive power 1,5 kW, Weight 380 kg, Processing capacity in kg/h approx. :, CU - Solid cable 500, CU - Stranded cable 250, AL - Cable 300, CU - Granulate 600, CU/AL - Radiator scrap 600, Electronic scrap 250, Various plastics 300, Tyre rubber 300, installed power - used power in work: about 60-65% : 1,5 kW, availability: 1 month approx, capacity: up to 600 kg/h, conditions: new equipment, SPECIAL FEATURES: spares usually available in stock - no downtime, CONSIDERATIONS: Ideal to start a profitable recycling business from scraps

Danoflex Ø 800 mm cylindrical abrasive grinding

Danoflex Ø 800 mm cylindrical abrasive grinding Max sandingwidth: 800 mm Main motor(s) power : 4.5 kW

Twin Shaft shredder mod. ITS850x550E- 22 kW. Heavy duty construction. Shredding chamber dimensions 8500x550 mm with n°2 counter-rotating hexagonal shafts fitted with n°28 blades with a thickness of 30 mm, 1 hook double spaced to 60mm. Including n°1 main gearbox with straight spur gears for fast and slow shaft. Driven by n°1 x 22 kW motor The shredder is supplied complete with supporting stand, feeding hopper. The electric control panel of this shredder will be fitted with a Siemens PLC to control the working logic of the shredder including the automatic shafts reversal system in overloading conditions, a display will show the working parameters and operating conditions. The total weight of the shredder is around 3.000 Kg.

Heavy duty refurbished grinder. Very robust construction. Rotor with staggered blades. Rotor diameter 400mm rotor length 700mm. Powered by 22kW electric motor. Complete with electrical panel with Siemens touch screen panel including inverter for the control of the grinder. This electric panel can also control a loading belt, exhaust fan, etc. The control was built in 2010 for internal tests and used for less than 100 hours. As an alternative, we can also fit a new e.motor 37kW on this grinder and manufacture a new control panel for the increased power at an additional cost. This special rotor with staggered blades is also particularly suitable for heavy applications and for grinding fibrous materials and textiles

ID3469 Simec LM2000 – Grinding line year/Baujahr 1999 Grinding line consisting of: Protec tilting table, infeed conveyor table, pre-grinding machine with 4 grinding supports, warm air blower, Kirschner putty station, oven, grinding machine with 10 supports (pre-equipped for 12) Grinding line made of: Protec tilting table, infeed conveyor table, pre-grinding machine with 4 grinding supports, warm air blower, Kirschner putty station, oven, grinding machine with 10 supports (pre-equipped for 12)

Center distance 5,000mm Height of the tips 600mm 105mm bar passage carriage equipped with grinding Machine in very good condition

General SKUR0081 LocationBarneveld MakeV.K.I. Schiedam bv (NL) Type3V SSHE Micro Votator / Schröder Kombinator No.V0910-94353-10A19191 Year of construction1995 Main Features MaterialStainless steel Motor7.5 KW Surface0.22 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Scraped surface heat exchangerMicro Votator Number of stages:1 steam heated, 1 freon r-404a cooled, 1 water cooled/heated Heating surface0,246 (scraped surface) Heating surface shell0,229 m2 Capacity50 - 150 Kg/h Cylinder sizes(3x) dia.157mm x 500mm Max. temperature140 degr.C With jacketcheck Inletdia.30mm Outletdia.30mm Motor7,5 KW, 380/660 Volt Speed50- 500 rpm Information Mounted on framecheck With switchcheck With switchgearcheck Weight1500 KG CEcheck Floorspace1,9x1,4 M Total height2,5 M Extra SpecificationsWith Bitzer Kühlmaschinenbau GmbH Reciprocati ...

General SKU272W407 MakeTerlet Terletherm TypeT2-6M MS No.97.0908.4 Year of construction1998 LocationBarneveld Pressure Working pressure10 Bar Working pressure jacket4 Bar Main Features MaterialStainless steel Motor11 KW Surface4.4 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4401 (316) Scraped surface heat exchangercheck Heating surface4.4m² Capacity132 l. Cylinder sizesDia. 725x1350 mm Max. temperature150°C With jacketcheck Max. temperature150°C InletDN80 OutletDN80 Motor11 kW, 415 volt Speed66 rpm Information Floorspace1,3x0,9 m Total height2,5 m Weight1400 kg CEcheck Extra SpecificationsCool-/heatings medium: water, glycol or steam. Material scrapers type: PTFE Technical specs Extra informationVolume 14/18 l., allowable temperature 150°C, pressure -1/4 bar, cooling/heating medium inlet DN50, Scraped surface hea ...

General SKUR0078 LocationBarneveld MakeTMCI Chemtech TypeCR 0327 Main Features MaterialStainless steel Motor5.5 KW Surface0.1 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Heating surface0,1 M2 Cylinder sizesdia 110 x 320mm Inletdia. 20mm Outletdia. 20mm Motor5,5 kW 380-415 Volt Information No.WO 0327/01 Year of constructionunknown Floorspace1,0x0,6 M Total height1,4 M Weight260 KgScraped surface heat exchangers-Heat exchangers > Scraped surface heat exchangersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU316S539 MakeAPV Products LocationBarneveld Type884 Pressure Working pressure10.34 Bar Working pressure jacket10.34 Bar Main Features MaterialStainless steel Motor11 KW Surface2.7 m2 Specified Features - Scraped surface heat exchanger Scraped surface heat exchanger(2x) Number of stages:2 Heating surface2,7 m2 Cylinder sizesdia. ? x 2050 Max. temperature204 degr. C With jacketcheck Max. temperature204 degr. C Inletdia. 70 mm Outletdia. 70 mm Motor11 kW 380-400/660-690 Volt (2x) Speed207 rpm Information No.9150 Year of construction1995 Mounted on framecheck Floorspace3,7x1 M Total height1,5 M Weight1900 KgScraped surface heat exchangersAPV ProductsHeat exchangers > Scraped surface heat exchangersBrand > APV Products What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any d ...

General SKUR0087 MakeSchröder & Co Maschinenfabrik (D) LocationBarneveld TypeVWK 01/60-400 Main Features MaterialStainless steel Motor2.2 KW Surface0.07 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Number of stages:1 Heating surface0.07 M2 Cylinder sizesdia.60x380mm With jacketcheck Inletdia. 25mm Outletdia. 25mm Motor2,2 kW 230 Volt With variable speed drivefrequency controller Information No.110705 Year of construction1989 Mounted on wheelscheck With switchgearcheck Floorspace1,4x0,4 M Total height1,4 M Weight230 KgScraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneve ...

General SKU311P700 MakeSchröder&Co Maschinenfabrik (DE) No.23-232 Year of construction1984 Mounted on framecheck Main Features MaterialStainless steel Motor2.2 KW Specified Features - Scraped surface heat exchanger MaterialStainless steel Scraped surface heat exchangerCooler Number of stages:1 Cylinder sizes+/- dia.80mm x350mm Max. temperature-20 degr.C. Inletdia.25mm (product), dia.25mm (Glycol) Outletmissing Motor2,2 KW, 220/380 Volt With variable speed drivecheck With variable speed drivecheck Information LocationBarneveld Mounted on wheelscheck With switchgearcheck Floorspace1,4x0,7 M Total height1,3 M Weight150 KG Technical specs Extra informationcylinder size: dia. 80 mm x 350 mmScraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- ...

General SKU227Y123 LocationBarneveld MakeTerlet Type190 l. No.89-063 1 Pressure Working pressure3.5 Bar Vacuum possiblecheck Main Features MaterialStainless steel Motor7.5 KW Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) Scraped surface heat exchangercheck Capacity190 l. Cylinder sizesø 570 x 1230 mm Max. temperature100 °C With jacketcheck 34 l. & 2,6 l. InletDN50 OutletDN50 Motor7,5 kW, 380—415 V Speed± 66 rpm Information Year of construction1989 Mounted on framecheck legs Floorspace1,20 x 0,90 m Total height2,40 m Weight1000 kg Extra Specifications6-arms scraperScraped surface heat exchangersNew arrivalsTerletHeat exchangers > Scraped surface heat exchangersNew arrivalsBrand > Terlet What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compare ...

General SKU034G143 LocationBarneveld MakeAlfa Laval TypeContherm 6x3 No.HC-4844 NCC + HC-1802 NCC Material Product contact materialStainless steel Pressure Working pressure20 Bar Working pressure jacket17.2 Bar Main Features MaterialStainless steel Motor7.5 KW Surface0.279 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Scraped surface heat exchanger(1x) Heating surface0,279 m2 each With jacketcheck Motor2x 7,5 KW, 415 Volt Speed177 Rpm Information Year of construction1992 / 1982 Mounted on framecheck With switchcheck Floorspace1,3x1,0 M Total height2,0 M Technical specs Extra informationworking pressure 20 bar (300 PSI) / 31 bar (450 PSI): jacket working pressure 15,5 to 17,2 barScraped surface heat exchangersDiscountAlfa LavalHeat exchangers > Scraped surface heat exchangersDiscountBrand > Alfa Laval What you can expect from  ...

General SKU020A140 MakeAlfa Laval TypeContherm 6x4 No.HC-288 Year of constructionunknown Mounted on framecheck Main Features MaterialStainless steel Motor4 KW Surface0.4 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Scraped surface heat exchanger(1x) Heating surface0,37 M2 (4 Square Feet) Cylinder sizesdia. 152mm (6 Inch) With jacketcheck Motor4,0 KW, 380 Volt With variable speed drivecheck Information LocationBarneveld Floorspace1,2x0,9 M Total height1,8 M Technical specs Extra informationcylinder size: 152 mmScraped surface heat exchangersDiscountAlfa LavalHeat exchangers > Scraped surface heat exchangersDiscountBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in  ...

1 cavity from PP material mold sizes: 383x450x384 mm machine size min. 100 T

Dimensions (L/W/H): 3000x1200x1240 mm Weight: 850 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2700x1000x1240 mm Weight: 650 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Soest Type of Machine : Universal Surface Finishing Line – Parquet / Wood Surfaces Year of Manufacture: 2019 Condition: Very good, lightly used Complete Soest universal surface finishing line for oiling, staining, lye treatment, and patination of wood surfaces, especially parquet. Robust industrial design with Siemens frequency-controlled motors and continuously adjustable speeds in forward and reverse. Includes roller coating machine, brushing/spreading machine, and extensive accessories. Components Included: - Roller Coating Machine RCR-400-L Reverse - Brushing/Spreading Machine VP-400-1B-2P-2B - 2 replacement application rollers - Material pump (new, unused) - 4 replacement brushes - Various spreading pads - Pneumatic brush cleaning machine Technical Details: - Maximum workpiece width: approx. 410 mm - Motor control: Frequency-controlled (Siemens) - Speed contr ...

De DIAVITE DT-15 is een ruwheids- en oppervlaktemetingsinstrument uit de DIAVITE-serie, gebruikt om de oppervlaktekwaliteit van materialen te bepalen in industriële metrologie-toepassingen. Het registreert ruheidsparameters via een stylus/probe en wordt vooral tweedehands aangeboden, omdat nieuwere modellen recentere technologie bevatten.

Surface reference plates, roughness measures MASSI surface grinding TGL 4763 Rz 0.063 μm - Rz 0.16 μm in wooden box Dimensions: 240 x 125 x 40 mm

Surfaces of reference plates, roughness measures MASSI surface grinding TGL 4763 Rz 1.6 μm and Rz 6.3 μm in wooden box Dimensions: 130 x 120 x 30 mm

Surface reference plates, roughness measures MASSI surface sanding TGL 4763 Rz 0.8 μm - Rz 20 μm in wooden box Dimensions: 345 x 125 x 40 mm

Code 0776 Description Surface grinding machine Make ELB Type SWBD 030 MCNC82 Machine No. 18.346.0383 Manufacturing date 1983 Control MCNC / 82-PC Tablesize 3520 x 600 mm Table grinding size L x B x H 3000 x 600 x 600 mm Magnetical plate size L x B 3000 x 400 mm Speed table movement 0,2 – 6 m/min. Max. distance table – centre grinding wheel 850 mm Speeds vertical 3 – 375 mm/min. Speeds cross 1,2 m/min. Speeds grindingwheel stepless 750 – 1400 omw/min Grindingstone: Ø 600 x Wide:100 x Bore: 200 mm Weight 18.000 kg Motor power 37 kW – 380 Volt Accessoiries Electro table 3000 x 400 mm Grinding unit with water cooling Filtering unit with paperfilter Profile grinding unit Condition Machine is in very good condition

GER RS-12/50 surface grinding machine. Grinding area: 1200x550mm. Distance table-centre of spindle: 625mm. Table speed: 2 to 25m/min. Maximum table travel: 1250mm. Maximum work weight: 1200Kgs. Maximum cross travel: 500mm. Grinding wheel size: 400x80x127mm. Manual diamond grinder. Vertical orientable headstock. Vertical automatic feed. Power of grinding spindle: 12,5cv. Weight: 4500Kgs.

NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg

ELB Perfect BD 15 PLC surface grinding machine, grinding area 1500 x 550 mm, grinding wheel 400 x 100 mm, electric perm magnetic clamping plate 1500 x 550 mm, automatic dresser with compensation, paper belt filter, the machine is overhauled, grinding spindle rebeared, guideways are scraped, meets the tolerance of a new machine. We are happy to take over the installation / training on site, as well as the subsequent service

Magnetic table 455 x 170 mm Digital Water tank Pulling device Wet grinding device

Precision Surface and Profile Grinding Machine FS1570 SL Grinding area: 1500 x 700 x 650 mm Grinding spindle motor: 18 KW Table drive: hydraulic Transverse drive: electromechanical Paintwork: RAL 6011 – reseda green Equipment: •Central lubrication • Wet grinding device • Fine adjustment knob on the transverse path handwheel • Dressing Diamond • Electro magnetic clamping plate 1500 x 750 mm • Magnetic plate adhesive force control Accessories: • Vertical automatic type SL with "LCD" flat screen and membrane keypad • Electric Straight Dresser • Stepless change of speed • Universal paper filter machine • Machine light • Column elevation by 200 mm • Precision balancing scale • 2 new grinding wheels Machine has been overhauled in 08/2018 "Invoice is available" Here's what was done: •Timing belt •Storage • Ball screw •  ...

ELB Perfect BD 10 750 PLC, Year of construction 2008 Control Siemens STC Grinding area 1000 x 750 mm Grinding wheel 400 x 100 mm Grinding spindle 10 KW Electro Perm Magnetic Clamping Plate 1000 x 750 mm Automatic straight-dressing device with compensation Coolant system with paper belt filter Machine is immediately ready for use CE compliant Installation / on-site training included

Favretto 500, Rotary table surface grinding machine, horizontal spindle, dia 500mm, electric elettrico with DRO

Vertical Grinding Machine, Surface Grinding Machine DORMAC / DORIA Type PerseoCup Grinding MachineFabr. No. 786 Year of construction 1987Grinding area 500 x 250 mmMagnet 400 x 150 mmGrinding height Grinding wheel - magnet approx. 190 mmGrinding height Grinding wheel - clamping surface Table approx. 235 mmGrinding wheel diameter 175 mmTable longitudinal movement approx. 600 mmGrinding wheel speed approx. 2800 rpm. Motor power approx. 2.2 kWNerg connection 380 volts, 50 Hz manual depth delivery via handwheel, travel per

The machine underwent a general overhaul in 2015 The following tasks were performed as part of the overhaul: repair of the electrical cabinet and hydraulics, scraping of the bed and table, replacement of bearings in the headstock, new springs for the axial bearings, new table piston rod and sleeves, installation of sludge separators. Documentation for the machine is available. Year of manufacture: 1980.

Favretto MD 300 Universal Surface Grinding Machine CNC Manufacturer [manufacturer]: Favretto Type [ type]: MD 300 Control unit: DTG Plus / Siemens 840D Baujahr[construction year]: 10/2006 Table size: 3,220 mm Grinding travel length: 3,200 x 900 x 725 mm Magnetic table/plate size [magnetic table/plate size ]: 3,000 x 600 mm Longitudinal table speed: 1–40 m/min Cross table speed: 5 m/min Cross locking mechanism speed: 1–50 m/min Maximum load: 4,000 kg (without magnetic plate) Grinding wheel size: 508 x 203.2 x 100 mm Grinding wheel speed: 1,400 rpm Motor power of grinding mandrel: 22 kW Weight of the machine approx.: 17,500 kg Dimensions[machine size]: 9,400 x 3,550 x 3,000 mm Accessories: Magnetic tabletop [magnetic tabletop] coolant press with paper filter various grinding wheels [various grinding wheels] Documentation We will be happy to answer any furt ...

Very good surface grinding machine Table surface / working area 200 x 600 mm

Control Other Grinding length [mm] 600 Grinding width [mm] 400 Grinding spindle: Speed 1,400 rpm Power 3.7 kW Grinding wheel dimensions (max.) 300 x 50 x 76.2 mm Work table: Clamping surface magnetic clamping plate, 600 x 400 mm Table load (max.) 600 kg Hydraulic table drive Longitudinal table stroke 200 - 650 mm Rapid traverse 28 m/min Grinding area 600 x 400 x 375 mm Equipment/accessories: Measuring System Engine Measurement System in X/Y/Z Dressing system prism arm for einkorn diamond Cooling coolant system with paper belt filter, tank capacity 140 l Other equipment Partial space encapsulation, work area light

Surface grinding machine. Magnetic chuck of 550x250mm. Table travel: 700mm. Grind surface area: 600x350mm. Max. height: 375mm. Cross travel: 300mm. Wheel: 350x127x50 / 300x127x100 Weight: 2900Kg.

The machine has been overhauled in the workshop. It was repaired, defective parts were replaced and functionally tested . The spindle bearing has been renewed, the rotary table drive has been overhauled Specifications Vertical grinding spindle assembly Workpiece diameter up to 30 mm Max. workpiece height 10/20 mm Grinding wheel diameter 300 mm Grinding wheel rotation speed 35 m/s Workpiece feed 1.5 to 15 m/min Drive power grinding wheel motor 2 x 22 kW Total drive cable approx. 50 kW Machine weight approx. 4.5 t Total space requirement approx. L x W x H 3.3 x 2.6 x 2.6 m The DISKUS DDS 300 RPD has been completely dismantled, cleaned, assembled and functionally tested. Spindle bearings and rotary table drive have been overhauled. Equipped by the manufacturer for grinding with CBN discs. The machine can be viewed by arra ...

Condition: Workshop overhauled, ready for demonstration and use, tested The DISKUS DDS 457 II CL was completely dismantled, cleaned, defective parts replaced and functionally tested. Specifications Grinding spindle: 2 pieces vertical Grinding process: Continuous process Workpiece width up to 60 mm Max. workpiece height 1-60 mm Grinding wheel diameter: 457 mm Grinding wheel rotation speed 24 m/s Workpiece feed 25 to 250 mm/min Drive power grinding wheel motor 2 x 15 kW Total drive cable approx. 35 kW Machine weight approx. 3.7 t Total space requirement approx. L x W x H 1.4 x 1.0 x 2.7 m Accessories: Replacement flanges – Errors, modifications and prior sale excepted –

Machine Details Stock number 1105-04042 Machine Type: Surface Grinding Machine Make JACOBSEN Type 1432 Year of construction 1992 Condition Conventional control type Storage location HAGUENAU FRANCE Country of origin Delivery time at short notice - by arrangement. Freight base delivery from site. Price Technical details Grinding length 900 mm Grinding width 410 mm Travel - x 900 mm Travel - y 410 mm Travel - z 300 mm Machine weight approx. 2700 kg Information Distance table - spindle center: 135-575 mm Table speed X: 30-30000 mm/min. Table speed Y: 4-3750 mm/min. Table speed Z: 4-4000 mm/min. Max. grinding wheel dimension: 300x50x76.2 mm Drive power grinding spindle: 4.7 kW MAGNETIC PLATE BRAILLON 800 X 400 MM 5 GRINDING FLANGES