surface grinding used for sale

Drive motor mould mill 110 kW; drive motor classifier 15 kW; supply pipe; including all air transport system including supply including magnetic separator; Jaudt dosing valve / cell wheel lock; explosion protection; GEA cairplus SX filter chamber; Equipped with landing floor 340x145; floor height 150 cm; with 3x various boxes parts explosion hatch; 1x complete overhaul kit stator blades; 1x new classifier in transport crate Auction-ID: A1-50864-2

The planing grinding moulding machine is a machine designed for professional use and will be used in the Foam industry for levelling, grinding and/or sawing of grooves in plates. The sawing unit behind the Wide band grinding unit is used for sawing grooves in the sanded plates. Broadband looping is defined as follows: • Planing: The surface of a workpiece is measured with the help of planer blades made flat, especially if more than 1 mm must be removed from the material; • Calibration: to the same thickness, so that a regular Workpiece surface is created; • Grooves: A rotating axis with saw blades for incorporating Grooves in the plates after they have been sanded. The machine can be inspected or put into operation under "power".

max. grinding wheel diameter: approx. 250 mm, max. grinding length: 800 mm, with magnetic clamping plate, dimensions: 800 x 400 mm, coolant device, fleece filter system

Key data: 100 mm, 200 mm, 350 mm

2014 VOUMARD 130 Gang-Style 3-Spindle CNC ID Grinder Technical Specifications X-Axis Travel: 300 mm Y-Axis Travel: 200 mm Z-Axis Travel: 250 mm Spindle Motor: 4.1 kW Maximum Swing Diameter Over Table: 350 mm Center Height: 165 mm Maximum Workpiece Length: 200–300 mm Maximum Grinding Depth: 200 mm Maximum Grinding Wheel Diameter: 150 mm Maximum Grinding Wheel Width: 15 mm Grinding Wheel Bore Diameter: 50 mm ID Grinding Diameter Range: 1–100 mm Maximum Chuck Diameter: 152 mm Workhead Speed Range: 1,000–1,500 RPM Workhead Swivel Range: -30° to +120° Electrical Requirements: 460 V, 3-phase Approximate Machine Weight: 4,500 kg Approximate Machine Dimensions (L × W × H): 2,591 × 2,032 × 2,184 mm Equipped With GE Fanuc Series 32i-Model A CNC Controller MistBuster Mist Collector

WEINIG Rondamat 931 tool grinding machine, year 1989. For precise sharpening and preparation of planer knives and cutter heads in wood processing. Conventional / semi-automatic controls typical of the model year, suitable for profile and flat grinding with manually assisted tool alignment. Stationary industrial design with stable construction, dependable technology and consistent grinding results. Overhauled in 2025 and immediately available.

rotary table dia.: . mm max. dia. of grinding wheel: . mm with manual ongoing: . 0 manually feed: . 0 o,55 KW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table dia.: . mm max. dia. of grinding wheel: 400 mm with manual ongoing: . 0 manually feed: . 0 o,55 KW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL DATA: Width of the sanding belt: 120 mm 2 speeds Installed power: 2 hp

TECHNICAL DATA: Shaft: Ø 30 mm Installed power: 1.8 hp (HP) EQUIPMENT: Replacement brushes Accessories for grinding

TECHNICAL DATA: Workable diameter: max. Ø 85 mm Voltage: 380 V Installed power: 2.2 kW

Power: 1.5 kW, grinding pad diameter: approx. 600 mm

Incl. open-fronted storage bins and pallet Auction-ID: A7-51326-53

for grinding unit Auction-ID: A1-50707-59

x-travel: mm y-travel: mm z-travel: mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stored on wooden pallet

Orschaner / Stanko 3G71 - Surface Grinding Machine - Sinusoidal magnetic clamping plate - Various accessories - Year of construction 1973 Technical data Basic data: - Accuracy class (GOST 8-71 / 8-82): В (high) - Max. workpiece size L×W×H: 630 × 200 × 320 mm - Max. workpiece weight (incl. magnetic plate): 100 kg - Table surface (magnetic clamping plate): 500 × 200 mm - Distance spindle axis – table: 80 - 445 mm Table movements: - Longitudinal movement (X): max. 710 mm - Transverse adjustment (Z): max. 235 mm - Table speed longitudinal: 5 - 20 m/min (infinitely variable) - Automatic cross feed per stroke: 0.3 - 4.2 mm - Hand feed longitudinal (1 turn handwheel): 15.3 mm - Manual feed transverse (pitch): 0.05 mm Grinding spindle / grinding wheel: - Grinding wheel dimensions: Ø 250 × 32 × 20 mm - Grinding wheel speed: approx. 2680 – 2740 rpm - Vert ...

Code: 0509 Brand: SOCOMEC Model: LNE 210 - CE Standard Belt sanding machine for wood, furniture, steel, aluminium, metals, plastics, etc. – CE Standard Work surface dimensions 2100 x 700 mm Manual table lifting by handwheel Belt width 150 mm Belt length 5950 x 150 mm Pulley diameter 200 mm Three-phase motor 4 Hp Suction inlet diameter 120 mm Overall dimensions mm 3100 x 1300 x 1700 h Weight kg 340

This grinder is ideal for regrinding tools such as face mills, drills, TIG welding needles, and more. is supplied as standard with: Accessories for lathe tools Accessories for drills Accessories for milling 5C Spring collet pliers (4-6-8-10-12 mm) Clutch wrench 38-42 Grinding disc wrench Allen key M3-M8 Screwdriver Diamond grinding wheel Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond pin Spring collets: 3/16\" - 5/16\" - 3/8\" - 1/2\" Grinding range 3 -28 mm Angle adjustable from - to horizontal 0-180 degrees Angle adjustable from - to vertical 0-45 degrees Angle adjustable from - to negative 0-52 degrees Clamping range 3 - 28mm mm Speed 5200 rpm Connected load 230 / 250 Volt / Watt Disc diameter 100 x 50 x 20 mm Machine weight approx. 45 Kg Dimensions L x W x H 0.5 x 0.4 x 0.4 m Condition: never used / new (5) Auction-ID: A7-51438-407

Grinding range 2 - 13 mm Sharpening angle min./max. 90 - 140 degrees Connected load 230 V Machine weight approx. 10 kg Dimensions approx. 0.35 x 0.2 x 0.2 m Condition: never used / new (5) Auction-ID: A7-51438-489

Drill grinding machine Grinding range 2 - 20 mm Acute angle min./max. 90 - 135 degrees Connected load 230 V Machine weight approx. 8.6 kg Dimensions approx. 0.35 x 0.2 x 0.2 m Condition: never used / new (5) Auction-ID: A7-51438-502

Saw blade grinding machine with: - Diamond grinding wheel for carbide circular saw blades- Rubber feet for damped and low-noise operation - Spacers for different saw blade holes Without saw blade Saw blade diameter 80 - 700 mm Workpiece headstock motor 0.25 kW Grinding wheel diameter 125 mm Speed 2850 rpm Grinding range -20 to +20 degrees Machine weight approx. 12 kg Dimensions approx. 700 x 400 x 300 m Condition: never used / new (5) Auction-ID: A7-51438-422

Key data: 1320 mm, 2 st., 160 mm

For sale: SAC Project RT 1320 Wide Belt Sander – 2 sanding units, 1320 mm The machine is used, has undergone a comprehensive technical inspection and calibration, and is fully operational and ready for use. Before purchasing, the machine can be started and thoroughly inspected at our company's premises. The machine's greatest advantage is its two-unit configuration, allowing calibration and precise finish sanding of workpieces up to 1320 mm wide. The hard rubber calibrating roller and segmented sanding pad provide a wide range of machining capabilities, while the touchscreen control panel with program memory makes it easier to perform various production tasks consistently. Specifications: • manufacturer: SAC • model: Project RT 1320 • year of manufacture: 2001 • working width: 1320 mm • maximum working height: 160 mm • number of sanding units: 2 • first sa ...

On and including pallet Auction-ID: A1-47451-296

Grinding stone diameter 1x 20cmø 1x 40cmø on and including pallet Auction-ID: A1-47451-295

On and including pallet Auction-ID: A1-47451-297

On and including pallet Auction-ID: A1-47451-298

SCM Sandya Win Wide Belt Sander Working width 630 mm Grinding height 3 – 160 mm 1 combi unit Electric height adjustment Optical Oscillation Two types of feed speed 5.5kw main power Net price

Universal cylindrical/internal grinding machine with motorized spindle, workhead/chuck and manual controls. Used condition, suitable for repair, refurbishment or workshop use. Manufacturer and model not visible; specs to be confirmed. Auction-ID: A1-51153-81

FRIEDRICH DECKEL SOE – Optical Single-Lip Tool & Cutter Grinder Manufacturer: Deckel Model: SOE Machine Type: Optical Single-Lip Tool & Cutter Grinding Machine Country of Origin: Germany Condition: Used Year of Manufacture: Not specified Technical Specifications Specification Details Grinding Spindle Speed 4,500 rpm Grinding Motor Power 0.55 kW / 0.75 HP Motor Speed 2,800 rpm Grinding Wheel Dimensions 100 × 50 × 20 mm Tool Clamping Diameter 0.5 – 18 mm Maximum Tool Diameter with Special Holder 25 mm Lateral Adjustment 10 mm in both directions Longitudinal Adjustment 40 mm Maximum Relief Angle 45° Indexing Head Fine Adjustment 15 mm Indexing Positions 12 Compatible Taper Collets MT1, MT2, GA Compatible Taper Adapters MT1, MT2, MT3 Optical Projector Magnification 8× (optional equipment) Microscope Magnification 20× (optional equipment) Machine Dimensions (L × W × H) 660 × 570 ...

Stankoimport 3Y131 Cylindrical Grinding Machine Type: Cylindrical grinding machine Manufacturer: Stankoimport Model: 3Y131 Grinding length: 2000 mm Grinding stone wheel: 500 mm Main Motor Power: from 3 kW to 15 kW Dimensions (L x W x H): approx. 4150 x 2350 x 2150 mm Grinding wheel speed: Adjustable, normally between 1000 and 3000 RPM Weight: Between 3000 kg and 8000 kg Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-11

Cincinnati Cylindrical Grinding Machine Type: Cylindrical grinding machine Manufacturer: Cincinnati Bushing diameter: 120 mm Distance between points: 1000 mm Arbor hole with cooling system: 20 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-9

OS Hostivař BU28/1000 – Conventional Cylindrical Grinding Machine Specification Details Manufacturer TOS Hostivař Model BU28/1000 – provisional identification Machine type Conventional cylindrical grinder Country of manufacture Czechoslovakia Distance between centres Approx. 1,000 mm – subject to verification Grinding capacity 280 mm Workholding 3-jaw chuck Grinding head External cylindrical grinding wheel Digital readout Heidenhain Control Conventional/manual Electrical supply 380 V, 50 Hz (nameplate) Connected load 10 kVA (nameplate) Auction-ID: A1-51153-53

grinding diameter: 630 mm grinding length: 3000 mm centre height: 315 mm swivel table angle max.: +4/-4 Grad grinding wheel speeds: 840-970 U/min workpiece weight in steadies max.: 2500 kg table speeds: 0,05 - 3,8 m/min grinding slide stroke: 540 mm grinding slide swivable +/-: +30/-10 ° workpiece swivable +/-: 90 ° grinding wheel size: 750 x 100 x 305 mm workpiece turning speeds: 8 - 315 U/min total power requirement: 25 KVA weight of the machine ca.: 13,5 t dimensions of the machine ca.: 12 x 4,4 x 2 m - SPS Cntrol Siemens - Internal Grinding attachment - wheel dresser - coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10617 Manufacturer: KELLENBERGER Year of construction: 2001 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175-250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 -5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 360° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20 - 400 / 10-400 Max. Grinding length: 900 mm Further information ...

Ref. -No.: 10618 Manufacturer: KELLENBERGER Year of construction: 2003 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-40 ...

Ref. -No.: 10619 Manufacturer: KELLENBERGER Year of construction: 1997 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0- 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360° ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The m ...

Ref. -No.: 10629 Manufacturer: MICHAEL DECKEL Year of construction: 2004 Type of control: CNC-Steuerung Storage location: Halberstadt Country of origin: Germany Workpiece Diameter: 250 mm Max. Grinding length: 340 mm Max. Workpiece Weight: 50 kg Grinding wheel diameter (max.): 150 mm Turning Speeds: 8000 RPM Workpiece holder: SK 50 Further information: The machine can be viewed while powered up.

Internal cylindrical grinding machine, Tripet Swiss, 1991, Grinding slide. 0.5 - 30mm, Grinding depth: 50, Center height: 102, Axles: Z , Y, U, B, V, , autom. Chuck, ...

Power: 2200W (2.2kW) Speed: 1420 rpm (revolutions per minute) Degree of protection: IP 55 (dust and water jets protected) Auction-ID: A1-51523-33

Motor power 1.5 kW, motor speed 2850 rpm Auction-ID: A7-51576-3

Suitable for regrinding and reworking of wood and metalworking tools of all kinds., Accessories:, Software package 1 (cylindrical tools sharp-edged, corner and full radius),, Software package 2 (conical-spiral tools sharp-edged, corner and full radius),, Software package 3 (drill and step drill),, Software package 16 (warming-up program),, Heli-Flute & Cone (span layout calculation program for cylindrical and conical cutters),, Pneumatic workpiece clamping,, Machine light,, Measuring probe,, Coolant tank 180 L., X-axis longitudinal movement: 400 mm, Y-axis vertical movement: 250 mm, Z-axis (transverse movement): 580 mm, Z-axis (lateral movement): 580 mm, C-axis swivel range: +/- 200°, Workpiece holder: ISO 50, Workpiece diameter: 260 mm, max. workpiece length: 270 mm, Max. Workpiece length: 270 mm, Grinding wheel RPM continuously adjustable: 0 - 10000 RPM., Grinding wheel drive power: 1 ...

Ref. -No.: 10159 Manufacturer: KELLENBERGER Year of construction: 1974 Type of control: N/A Control: N/A Storage location: Halberstadt Country of origin: Schweiz Grinding Length: 1000 mm Grinding Diameter: 250 mm

Ref. -No.: 10396 Manufacturer: KELLENBERGER Year of construction: 1988 Type of control: Konventionell Control: N/A Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500/1700/2200/3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400/10-4 ...

Ref. -No.: 10665 Manufacturer: GLEASON - PFAUTER Year of construction: 2001 Type of control: CNC Control: Siemens Numerik 840 Storage location: Halberstadt Country of origin: USA Machine length: 3700 mm Machine width: 2400 mm Machine Height: 2750 mm Workpiece Weight Max.: 380 kg Weight Of The Machine Ca.: 11,5 t Travel -X Axis: 230 mm Travel -Y Axis: 135 mm Travel -Z Axis: 200 mm Max table speed: 240 1 / min

Table dimensions: 2.550 x 950 mm motor power: 4 kw sanding belt measurements: 7.150 x 150 mm : 400 mm ventilator: 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speeds: 3.000 U/min grinding wheel diameter: 150 mm table-size: 380 x 220 mm T-slots: 1x 0: 3~220 / 380 V total power requirement: 0,37 kW weight of the machine ca.: ca. 150 kg dimensions of the machine ca.: 0,7 x 0,6 x 1,25 m Turning Tool Grinding Machine GREIF - DHL K-0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: min / max: 10 / 250 mm grinding depth: 400 mm external diameter: max. 380 mm swing dia.: 390 mm table:: table travel: max. 550 mm stroke of the table: min. 2 mm rapid traverse: 10 m/min table speed -stepless-: 0 - 10 m/min rough adjustment: 18 mm fine adjustment: 4 mm max. workpiece weight: 100 kg Workhead.: spindle head: B 6 DIN 55021 spindle turning speed - stepless: 15 - 1.500 U/min pivoting angle: +/- 30 Grad spindle bore: 50 mm power capacity: 2 kW internal grinding:: rapid traverse: 0 - 250 mm/min stroke: 70 mm power requirement: 3 kW total power requirement: kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 3,0 x 3,0 x 3,2 m Documents: exhaust fan: Fibaron paper band filter: Polo Fire extinguish system: Deugra Internal Grinding Machine BAHMÜLLER - JES 12 - new control (July 2015) The data for this ad was created with ModulMWS - the softwa ...

Key data: 1100 mm, 2 st., 162 mm

For Sale: UNITEK Winner 1100 Wide Belt Sander – 2 Rollers, 1100 mm The machine is used, has undergone a professional technical inspection, is fully operational and ready for use. Before purchase, the machine can be started and thoroughly tested at our company's premises. The main advantages of this machine are its 1100 mm working width and two-roller sanding system, consisting of a steel roller and a rubber roller. Electric adjustment of the sanding thickness and continuously variable conveyor speed allow for convenient adjustment of operating parameters to the material being processed. Specifications: • Manufacturer: UNITEK • Model: Winner 1100 • Year of manufacture: 2010 • Working width: 1100 mm • Maximum sanding height: 162 mm • Minimum sanding height: 5 mm • Number of sanding rollers: 2 • First roller: steel, Ø150 mm • Second roller: rubber, Ø1 ...

WALTER Helitronic Power Diamond CNC Sharpener TECHNICAL FEATURES: Year: 2015 NC Type: FANUC Series 31i-B5 Software version installed: Tool Studio 2.1 R8 Color Touch Screen: 15 ["] Number of axes: 5 X-axis travel: 460 [mm] X-axis resolution: 0.0001 [mm] Y-axis travel: 320 [mm] Y-axis resolution: 0.0001 [mm] Z-axis travel: 660 [mm] Z-axis resolution: 0.0001 [mm] X, Y and Z fast travel speed: 15000 [mm/min] A-axis travel: 360 [°] C-axis travel: +/- 200 [°] C-axis resolution: 0.0001 [°] Max. length Workpiece: Face grinding: 280 [mm] Max. length of sharpening: 350 [mm] Max. diameter of sharpening: 320 [mm] Wheel Holder Spindle Attachment: HSK-50 Maximum speed Grinding spindle: 10500 [rpm] Wheel spindle power: 14.5 [kW] Max. diameter Grinding wheel: 200 [mm] Workpiece Spindle Nose: ISO 50 Max. weight permissible workpiece headstock: 20 [Kg] Working time:  ...

USED DISKUS DDS 1000 IV CL grinding machine Serial No.: 7835 Year: 1989 2 Grinding wheels diameter 1000 mm Auction-ID: A1-50950-87